Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
I have a cluster with 90 values..  ninety!  yes that many.
Change one bloody value and the prototype changes in the TestStand step...  Reload the prototype and guess what happens??!!??
All the bloody values get reset to defaults!  AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
If it was in one place, I could survive the ordeal.  But I have to change bloody prototypes in many places!!!!
more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
I can't even copy the bloody values!!!!!!!  AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
Are there any tricks that I am not aware of, or have forgotten over the years, or...  ...   something??!!??!???!!
If there are none, I will have to post an improvement to TestStand..  I should mention I am using an older version (4.1).

Hmmmmmmmmmmmmmmmm,
I am not not very famous with LV and its cluster types.
So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
Make a copy of the step that has to be modified to an new sequencefile. 
Make modifications the in the copy.
Now you should have the same DataType Name but other contents in the container. Save it.
Normally there should be a message box that tells you that version has been incremented. - Accept it.
Set in StationOptions-File "Allow Automatic ...." to Never.
Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all  "Use Current Loaded.."
You have updated the type.....
Hope this worked,
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Similar Messages

  • When I upload any photos from iphoto or a folder it overwrites all the existing photos. is there a way to add to the existing library without deleting what's already in the library?

    When I upload photos from iphoto or any other folder it overwrites all the existing photos in my ipad. is there a way to add to the existing library without deleting what's already in the library?

    No, apart from using the emailing them, to yourself or using a third-party app such as Simple Transfer (in which case the photos will only go into the Saved Photos/Camera Roll album) or the camera connection kit (Imported album). You need to sync all the photos that you want on the iPad in one go, as only the contents of the most recent sync remains on the iPad - not including photos in a sync is how you delete them from the iPad

  • Is There Any Way to Add Back the Sidebar in 12.01?

    Is there any way to add back the sidebar in iTunes 12.01 like there was in iTunes 11?

    Thanks.  It appears that the sidebar appears only when I click on the Playlists option under whatever item I've selected.  If I have a device connected, it shows up in the bar that starts with music, movies, and TV shows.  If I think click on Playlists, the device appears in the sidebar too like it used to. 

  • Is there any way to add text or arrows onto photos in iPhoto when creating a book?

    I am creating a photo book (Album), in iPhoto, in Projects. There are some place where it would be helpful if I could draw an arrow on the Photo to indicate certain places. I also would like to add text onto a photo in the book. This is as well as typing in the 'text box' provided. It needs to be on the actual photo in the book. Is this possible? I am using Version 9.5.1 which i think is the latest and i am running on Maverick on my iMac.

    There is no way to add anything to the face of a photo in iPhoto at all You will need an extenral editror for that kind of work. You can add text and arrows etc with Preview, already on your Mac or with apps like these:
    Seashore (free)
    The Gimp (free)
    Graphic Coverter ($45 approx)
    Acorn ($50 approx)
    Pixelmator ($50 approx)
    Photoshop Elements ($75 approx)
    There are many, many other options. Search on MacUpdate or the App Store.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

  • Is there a way to view all the messages in a folder containing subfolders?

    I use Mac Mail for my work email (becuase I hate entourage...), but the way it displays messages within folders is really inconvenient. Let's say I have a folder for a client (Brand XYZ) and within that folder I have subfolders (Campaign A, Project B, Other). If I want to view all the emails for the highest folder (Brand XYZ) there doesn't seem to be an option to view all the messages for that folder without going through each subfolder and viewing its contents.
    How I see it:
    Brand XYZ - only generic emails that don't pertain to a specific topic
    Campaign A - only emails regarding this campaign
    Project B - only emails regarding this project
    How I want to see it:
    Brand XYZ - ALL EMAILS; generic emails that don't pertain to a specific topic & emails within subfolders
    Campaign A - only emails regarding this campaign
    Project B - only emails regarding this project
    Is there any way of doing this??? Thanks for the help!

    No, you can't mix "all" and "any" filters. You can only select one. I haven't had a lot of success using boolean for filtering. Only thing I can say is try it. If it works for you in the Mail search window, it should work in the smart mailbox search.
    For creating search criteria filters, only thing I can suggest is think about what you want it to show. Then look at the criteria given in smart mailboxes and think about what the best way to achieve it would be using the any or all. You may need to create seperate SMs for different criteria. As I said, you can put smart mailboxes in a smart mailbox folder, but you can put a SM in a local mailbox or within another SM.
    You could also use SM in conjunction with the local mailboxes. If you are moving messages to seperate local mailboxes, you could just use the SM to view all messages from a particular client. That would make more since than moving the message to a main local mailbox and then copying them to subfolders so they can be viewed from both. The big downside to that is duplicate messages, but if it works for you then that's OK.

  • Is there a way to automatically set the file name in Acrobat Properties when exporting a PDF from Indesign?

    When I used Quark to make a PDF, the title area in the PDF was automatically populated with the file name, there in the properties tab. We like use this area to confirm file names of original files, so we can keep track of drafts, (in case the file name of the PDF is changed, which our boss often does). Is there any way to set up InDesign to do the same?

    @stadlock – I think I know what you mean…
    You exported to PDF and changed the file name in the export dialog to a different one from the document name presented there the first time you exported that document. And in exports after that the new name will be presented in the dialog instead of the name of the document.
    What you can do against that?
    1. First time you want to export: Save before the document is exported. And do not save after it's exported with a new file name.
    2. After the new file name is already there in the export dialog:
    Type in the document name in the dialog. Export. Or abort after chosing a export preference. Save. Check again, if the document's file name is in the export dialog. If yes, procede like in suggestion #1. If not do a full export with the document's file name, save and then procede with suggestion #1.
    Uwe

  • Is there a way to validate whether the entered value is in the recordset?

    I only know that the spry validation field can only validate format and patterns, how can i modify it so that it performs the above function?

    Maybe the following will help
    http://www.coldfusionjedi.com/index.cfm/2006/8/25/Spry-Example-Check-it-user-exists

  • Is there a way to display again the description field by clicking on the gold star near the url (useful to type memos about this site)?

    In the previous versions of Firefox, when you click on the star near the url, you can add this website on your favorites. Another click and you can edit some fields about this bookmark, like the url, the folder, etc...
    But with FF17, the Description field is no longer there. You can only find it when managing your bookmarks, that is not really user friendly.
    Is there a way to add again the description field when clicking on the gold star? It's very useful for adding notes about this website, and it's also synch with addins like Xmarks

    Add code to the userChrome.css file below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
    *http://kb.mozillazine.org/Editing_configuration
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #editBMPanel_descriptionRow { visibility: visible !important; }
    </nowiki></pre>

  • I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year.  Some how the birthday did not populate the photo calendar.  Is there a way to add the birthday iCal calendar into the calendar project?

    I created a birthday calendar to use in iphoto for calendar.  When a new calendar project is started each year, I click on it in.  Some how the birthday did not populate the photo calendar this year.  The photo calendar is almost complete.  Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

    Hi,
    If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
    Best wishes
    John M

  • Is there a way to add two windows in the same window?

    is there a way to add two windows in the same window?

    what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
    or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

  • Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.

    Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.  Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time?  Something like it works in Gmail.  I do not want to use set lists, I want to enter different addresses each time I send an email.  And I am a very slow typist, so I don't want to type the first few letters of each recipient's name.  It is much faster for me to just click on the e-mail addresses in the list as a group.  It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group.  If there is a solution to this, please tell me.  Thanks.

    Vatlily,
    Try this:
    1. Select Mail>File>New Message.
    2. Select Mail>Window>Address Panel.
    3. Use (command+click) on the desired addressees in the Address Panel to create the list.
    4. Click "To:" on the top left of the Address Panel.
    The group that you selected will be added to the "To" field in your New Message.

  • Is there a way to add/delete words from the predictive text ?

    Is there a way to add/delete words from the predictive text options that my iPhone is giving me? I'm using an iPhone 6 Plus with iOS 8.
    There are specific words that are popping up in the area right above the keyboard where it displays 3 word suggestions to choose from. This area seems to suggest words that I have typed before, I'd like to remove these words. Default seems to select the word in the center and when I'm typing fast on occasion it will recommend and select words that I don't need to use.
    Any help would be appreciated.

    999753 wrote:
    I know in 10g delete is added but in 9i i can only work with UPSERT( update, insert)
    is there a way to add delete into 9i MERGE? or somehow encapsulate it?
    Thank youI would suggest upgrading to a supported version of the database. 9i has been unsupported for many many years now.
    And to answer your question... to the best of my knowledge, there is no workaround. It works as it works.

  • Is there any way to turn off the auto formatting in Pages?  I just want to type a letter and add pictures and titles, and Pages keeps changing font sizes and doesn't let me "Do it my way".  I HATE this!

    Is there any way to turn off the auto formatting in Pages?  I'm using a blank document, so I figured I could write my letter and add pictures any way I wanted to.  But NO!  Pages keeps changing the font size!  I typed a large heading as a title, and when I try to change to a smaller font for the body of the letter, it changes the size back to the larger size!  I am getting SO FRUSTRATED!  I've spent over an hour trying to get the stupid program to let me just type my letter!  Can anyone help?

    The only one left is the "unsubmitted text" dialogue, which would not be a problem if I were not a Facebook user; after updating the "Richard is..." field (which does not require a manual submit to actually send) I get the above message. This is obviously Safari just not realising that the info has been sent and is therefore (I imagine) one for Apple themselves to answer!!
    You're welcome Rich. Glad to help.
    Not being a Facebook User, I'm not sure how to respond to the error situation. However, this would be something to report to Apple as a bug via the Safari Menu. First, open to the page in question, then select "Report Bugs to Apple".
    Mahalo for the and Aloha from Big Island.

  • Is there a way to add roman numerals to the footer? (eg. page i of n)

    Is there a way to add roman numerals to the footer? (eg. page i of n)

    Hi Emily ,
    You may face challenges doing this task in Acrobat .
    If you have created the PDF from word ,I would recommend doing the page numbering in Word, not Acrobat, since you have more flexibility with that program.
    Or the second option is ,if you know how to play around with java script.Here is the code for the same.
    Yeah, it's possible. Create a unique text field on each page with this code as the custom calculation code:
    event.value = romanize(event.target.page+1);
    Then place this function at the doc-level (I didn't write that one):
    function romanize(num) {
        if (!+num)
            return false;
        var digits = String(+num).split(""),
            key = ["","C","CC","CCC","CD","D","DC","DCC","DCCC","CM",
                   "","X","XX","XXX","XL","L","LX","LXX","LXXX","XC",
                   "","I","II","III","IV","V","VI","VII","VIII","IX"],
            roman = "",
            i = 3;
        while (i--)
            roman = (key[+digits.pop() + (i * 10)] || "") + roman;
        return Array(+digits.join("") + 1).join("M") + roman;
    Regards
    Sukrit Dhingra

  • Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.

    Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.

    or is there a way to upload the digital copy to store in my iCloud account?

Maybe you are looking for