Is there a way to add video censors in iMovie 09?

Just want to add a video censor to a couple films. Doesn't have to be anything fancy, just a black box will do just fine.

You should be able to simply drag a video clip onto your video track; the same place you previously had your background image. I believe Video Track 1 is recommended for the background you are going to use.
If you are new to the technique, this short video on YouTube may help:
http://www.youtube.com/watch?v=zhXhPIB1j38
Hope this is of some assistance.

Similar Messages

  • Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

    Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

    Select one and click cmd-A which selects them all.
    Then click the import button if it hasn't started already.

  • I am trying to add a video to my Keynote presentation on my iPad. Since I am 2 hours away from my computer to use iTunes. Is there a way to move videos to the camera roll so I can use them?

    I am trying to add a video to my Keynote presentation on my iPad. Ideally I would like to be able to play the video in the presenation sream rather than switch between apps. Since I am 2 hours away from my computer to use iTunes syncing to move them there is not an option. Is there a way to move videos already on the iPad to the camera roll on iPad 2so I can use them?

    iOS: Importing personal photos and videos from iOS devices to your ...

  • Is there any way to add chapter markers running Mavericks? Is there a reason they have been stripped out the new OSX?

    Is there any way to add chapter markers running Mavericks? Is there a reason they have been stripped out the new OSX?

    Is there any way to add chapter markers running Mavericks? Is there a reason they have been stripped out the new OSX?
    Depending on your choice of workflows, it appears you can still
    1) Add chapter marks manually with QT 7 Pro,
    2) Add chapter markers graphically using GarageBand,
    3) Use a video editor to set chapter markers graphically,
    4) Use a DVD conversion/burning app to set specific or add equi-interval chapter markers, or
    5) Use a media/device player that adds playback only chapter makers when no chapter track is embedded within the file.
    What kind of chapter markers are you referring to here? Mine are not "stripped out" during normal use but can be automatically removed during various conversion workflows.

  • I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year.  Some how the birthday did not populate the photo calendar.  Is there a way to add the birthday iCal calendar into the calendar project?

    I created a birthday calendar to use in iphoto for calendar.  When a new calendar project is started each year, I click on it in.  Some how the birthday did not populate the photo calendar this year.  The photo calendar is almost complete.  Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

    Hi,
    If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
    Best wishes
    John M

  • Is there a way to create videos 'fast' with adobe products?

    I am an affiliate marketer. I have produced a video  Inspro Program: personal development planned and achieved - YouTube and I would like to know if there are ways to create videos within maybe 10 minutes with Adobe products. Please suggest a quick method.

    Turnaround times ultimately depend on the skill of the person doing the work just as much as the programs' capabilities. And 10 minutes for editing a video? That's just ridiculous. Importing/ exporting footage or tweaking voice-over audio alone could take longer as could replacing/ re-typing text.
    Mylenium

  • Is there a way to add two windows in the same window?

    is there a way to add two windows in the same window?

    what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
    or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

  • Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

    Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
    I have a cluster with 90 values..  ninety!  yes that many.
    Change one bloody value and the prototype changes in the TestStand step...  Reload the prototype and guess what happens??!!??
    All the bloody values get reset to defaults!  AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
    If it was in one place, I could survive the ordeal.  But I have to change bloody prototypes in many places!!!!
    more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
    I can't even copy the bloody values!!!!!!!  AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
    Are there any tricks that I am not aware of, or have forgotten over the years, or...  ...   something??!!??!???!!
    If there are none, I will have to post an improvement to TestStand..  I should mention I am using an older version (4.1).

    Hmmmmmmmmmmmmmmmm,
    I am not not very famous with LV and its cluster types.
    So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
    Make a copy of the step that has to be modified to an new sequencefile. 
    Make modifications the in the copy.
    Now you should have the same DataType Name but other contents in the container. Save it.
    Normally there should be a message box that tells you that version has been incremented. - Accept it.
    Set in StationOptions-File "Allow Automatic ...." to Never.
    Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all  "Use Current Loaded.."
    You have updated the type.....
    Hope this worked,
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.

    Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.  Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time?  Something like it works in Gmail.  I do not want to use set lists, I want to enter different addresses each time I send an email.  And I am a very slow typist, so I don't want to type the first few letters of each recipient's name.  It is much faster for me to just click on the e-mail addresses in the list as a group.  It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group.  If there is a solution to this, please tell me.  Thanks.

    Vatlily,
    Try this:
    1. Select Mail>File>New Message.
    2. Select Mail>Window>Address Panel.
    3. Use (command+click) on the desired addressees in the Address Panel to create the list.
    4. Click "To:" on the top left of the Address Panel.
    The group that you selected will be added to the "To" field in your New Message.

  • Is there a way to add/delete words from the predictive text ?

    Is there a way to add/delete words from the predictive text options that my iPhone is giving me? I'm using an iPhone 6 Plus with iOS 8.
    There are specific words that are popping up in the area right above the keyboard where it displays 3 word suggestions to choose from. This area seems to suggest words that I have typed before, I'd like to remove these words. Default seems to select the word in the center and when I'm typing fast on occasion it will recommend and select words that I don't need to use.
    Any help would be appreciated.

    999753 wrote:
    I know in 10g delete is added but in 9i i can only work with UPSERT( update, insert)
    is there a way to add delete into 9i MERGE? or somehow encapsulate it?
    Thank youI would suggest upgrading to a supported version of the database. 9i has been unsupported for many many years now.
    And to answer your question... to the best of my knowledge, there is no workaround. It works as it works.

  • Is there a way to add a single jar to an existing shared library (war)?

    Hello,
    Is there a way to add a single jar to an existing and already deployed shared library (war) in weblogic directly?
    Basically, instead of building and deploying the war each time a new jar should be added to the list of jars present in the war and deploy it in weblogic, is it possible to make the process more automatic and efficient by just adding the new jar to the existing deployed war (no matter if the consumers must be reloaded)?

    Extract the WAR file and rearchive with theJAR file included.

  • Is there a way to add roman numerals to the footer? (eg. page i of n)

    Is there a way to add roman numerals to the footer? (eg. page i of n)

    Hi Emily ,
    You may face challenges doing this task in Acrobat .
    If you have created the PDF from word ,I would recommend doing the page numbering in Word, not Acrobat, since you have more flexibility with that program.
    Or the second option is ,if you know how to play around with java script.Here is the code for the same.
    Yeah, it's possible. Create a unique text field on each page with this code as the custom calculation code:
    event.value = romanize(event.target.page+1);
    Then place this function at the doc-level (I didn't write that one):
    function romanize(num) {
        if (!+num)
            return false;
        var digits = String(+num).split(""),
            key = ["","C","CC","CCC","CD","D","DC","DCC","DCCC","CM",
                   "","X","XX","XXX","XL","L","LX","LXX","LXXX","XC",
                   "","I","II","III","IV","V","VI","VII","VIII","IX"],
            roman = "",
            i = 3;
        while (i--)
            roman = (key[+digits.pop() + (i * 10)] || "") + roman;
        return Array(+digits.join("") + 1).join("M") + roman;
    Regards
    Sukrit Dhingra

  • Is there a way to play videos other than getting them through itunes

    is there a way to play videos other than getting them through itunes.  I have lots of dvd's that I want to play on my ipad but don't want to have to buy them again through itunes.

    You'll need to rip the DVDs to your hard drive using a tool such as Handbrake. Be sure to rip them in an iPad compatible format. Then you can drag them into iTunes and sync them to your device. It is a little bit of work but that's really the only way without (as you say) rebuying them in iTunes.

  • Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the online.

    Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the only one.

    Use the search feature and type in Flash and there are like thousands of posts on this.
    You seem to think you are addressing Apple with your post.  This is a user forum and we are all users just like you.

  • HT4437 I have windows seven on my computer and use Safari 5 as my browser.  I also have the latest version of apple tv...is there a way to have videos from my browsing go to apple tv?

    I have windows seven on my computer and use Safari 5 as my browser.  I also have the latest version of apple tv...is there a way to have videos from my browsing go to apple tv?

    Airparrot is your only option in my opinion. I have not tried it myself yet but here is a link to their website. They offer a trial so check it out.
    http://airparrot.com/

Maybe you are looking for