Is there a way to adjust the volume on all clips so they all have the same volume?

I'm making a highlight film of my two children, and wonder if there is a way to make all clips have the same volume. I know I can adjust the individual clips decibel niveau, but ven though I adjust them to the same level i.e -6 decibel, the clips volume are not the same. Any suggestion, or do I have to adjust each clip with different decibels niveaus and try to make the volume the same, like one clip can have -6 decibel, one light have 3 decibel and so on in order for the volume to be Aamodt the same.

On the Time Line you can copy the clip (Command-c) that has the levels you want. Select the other clips and hit Shift+Command-V to paste effects. Check the Audio attributes.
Russ

Similar Messages

On iTunes 11, how can I access home sharing if the music is from a CD? Is there any way I can download these songs if (A) I no longer have the CD, or (B) I do not want to pay $25 a year for iTunes Match?

On iTunes 11, how can I access home sharing if the music is from a CD on a different computer using Home Sharing? Is there any way I can download these songs if (A) I no longer have the CD, or (B) I do not want to pay $25 a year for iTunes Match?

Yes, you can copy songs that you ripped from a CD to your Home Sharing computer.
Turn on Home Sharing first on both computers. To do that, go to File > Home Sharing > Turn on Home Sharing. Enter your Apple ID and password.
Now go to your computer that you want to copy the songs to and connect to your Home Share. You can do that by clicking on the popover button located at the left top corner right below the play control buttons. Click on it and scroll to the bottom until you see your Home Share and select it.
Go to Music in your Home Share. Select the songs that you want to copy in your Home Share and click Import at the bottom right corner.

CANON VIXIA TO DVD FROM FCPX - APPARENTLY YOU HAVE TO TRANCODE THE FOOTAGE. IS THERE A WAY TO GET A CLEAN DVD WITHOUT FREAKING TRANSCODING. DONT HAVE THE TIME TO MUCH WORK.

FCPX - editing system

IS THERE A WAY TO GET A CLEAN DVD WITHOUT FREAKING TRANSCODING. (?)sic
Nope.
DONT HAVE THE TIME TO MUCH WORK.
Then you need to find another delivery method.
x

HT1751 Is there any way to transfer my music to an External Hard Drive and have the music disappear from the library until I plug in the Hard Drive?

I have an old External Hard Drive that stores all my music from years ago. I was wondering if it was possible to have the music only appear in the Itunes library when the External Hard Drive was plugged in. So when it is not I just have the music I have added recently, not the thousands of songs from the late 90's. I do not always keep my External plugged in and when it is not all the thousands of songs come up with the and is slightly annoying. Someone I knew in the past had the Itunes set up this way but did not know how it was done. Any help would be appreciated!

Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

Is there a way in iTunes 11 to double click on an album and have the track list show up the way it used to in iTunes 10.7?

I'm talking about Album view where album covers are shown where you used to be able to double click and have it show up in a list view, but now in iTunes 11 there's just a window that pops up with the track list in front of other albums. Any way to get it back to the way it was in iTunes 10.7 where you double clicked on an album and it went into a list view?

Turning your Mac into a clock radio.
1. In iTunes create a playlist that contains just the radio station you want to wake up to.
2. Export the playlist (as .m3u works well). Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
3. In iCal create an event entry at the time you want to wake up.
4. Right (or Control) click on your wakeup event and select Get Info.
5. For "alarm" select Open File.
6. Now under Open File there will be a place to add the file to open. It will probably be some default entry (like iCal). Click on it will allow you to select "other." Then use the file dialog to select your playlist file.
Your Mac will wake you up at the appointed time. You don't need to keep iCal running. If you want to put you Mac to sleep for the night then there is one more thing you need to do. Open System Preferences to Energy Saver and click on the Schedule button. Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
Dan

Is there a way to adjust the sounds' volume withou...

I have an annoying problem with my Skype:
The volume of the other person is perfectly fine, but the volume of the sounds for calls is just too high. Like hurting my ears too high.
Is there a way to adjust these sounds without changing the other person's volume?
Solved!
Go to Solution.

Not as far as I know. I have self, for the same reason set the Volume of Skype to about 40% and I don't see any effect on the call volume. Only ringing and notification sounds are affected.

Is there a way to adjust the bass and treble on my iMac Power PC sound system?

Is there a way to adjust the bass and treble on my iMac Power PC G5 sound system? It has a lot of volume (more than my JBL speakers).

No, but iTunes has an Equaliser that enables you to do that.

Is there a way to adjust volume of ringtone BEFORE downloading it?

I downloaded a ringtone last night to my iPhone. Everything went smoothly but find that the ringtone is way too low for me to hear when it rings... is there any way to adjust this before I download it? Let me just say that otherwise the volume on my iPhone is perfect - I have never had a problem with this just with this ringtone in particular. I have try to go to the info of this particular ringtone and i can see a volume adjustment under the heading Options but it is gray - anyway to make it active? Any info will be appreciated. thanks.

Ditto, the ringtone I created is unusable, as it is too quiet. There does not seem to be an option to increase the volume. Even if I set the ringer volume all the way up I can bearly hear it. Admittedly it is a relatively quiet segment of the track I used, but surely the ringtone should auto adjust its volume?
The preview on my MacBook sounded great, on the iphone with it sat in the dock, I barely even noticed it was playing.

Is there a way to adjust the left/right output?

Is there a way to adjust the left/right output on the iPod?
Mine seems to push a little harder on the left side no matter which
ear devices I use. My hearing in my right ear is a little weaker,
so I'm hearing mostly just the left side instead of an equal balance.
My best earphones don't fit the same way when reversed, so they don't
sound anywhere near the way they should. You know the drill-- no
fit, no seal, no bass... no good.
And, yes, I know I can make a crossed connector cable...
Thanks for responding.

using the 30 pin connector means it bypass the volume switch so you can't adjust the volume, see adjust the EQ setting helps. Otherwise you have to add the switch (a pre-amp etc) in between the iPod and your device

Is there a way to adjust the settings on launchpad so that when I swipe into it all the open apps/pages are fully separated (like in exposé) so that I can fully view all of them simultaneously?

Hi Apple community,
This is my first go at this so be kind,
My question concerns launchpad. Coming from Snow Leopard I had been using spaces. I like to keep certain bundles of programs on separate desktops, for example all word processing related tasks in one place. I have set up the equivalent on Yosemite.
My problem is concerns the loss of exposé. Now I know when you swipe into launch pad you get a very similar effect but the issue I am having concerns the "zoom out" effect when you swipe into launchpad. With exposé all open apps/pages etc would be fully exposed - in my case several (sometimes as many as 9 word documents). What I am running into is when I do this in / into launch pad the "pile" of docs is exposed but they are still overlapping so I can't get a good look at which is which and visually identify where I want to navigate to.
My question is this; Is there a way to adjust the settings on launchpad so that when I swipe into it all the open apps/pages are fully separated (like in exposé) so that I can fully view all of them simultaneously? If so, instructions on how to do so would be greatly appreciated. Any alternative suggestions to doing this outside of launchpad are also welcome. If there is an exposé app for example, I would be quite willing to go that route.
My main concern is being able to quickly (ie a touchpad gesture) expand all the open pages so I can bounce between them.
Much thanks from a loyal Apple friend.

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

__ Is there a way to adjust the key commands for switching channels in curves?

__ Is there a way to adjust the key commands for switching channels in curves?
By that I mean <command> + 1 for cyan, <command> + 2 for magenta etc. like Photoshop CS3 rather than <option> + 3 for cyan etc.
There's gotta be a way under Edit --> Keyboard Shortcuts - but I can't find it!
Thanks,
Hugh

Hi,
You can find the CS4 plug-in here:
http://blogs.adobe.com/jnack/files/Use_Old_Shortcuts.zip
It's inline in tis post with some more background info:
http://blogs.adobe.com/jnack/2010/05/use_legacy_shortcuts_option_in_cs5.html
regards,
steve

Is there a way to adjust the level of several audio tracks at once?

I am working in Adobe Premiere CS6 and all of the audio is out of wack. Is there a way to adjust all of it at the same time to the same level or do I have to go clip by clip?

I had made Feature Requests to "gang" several Track sliders, like one can with a mixing board. However, the Sub-Mixes handles that nicely, as was pointed out to me by Adobe.
Thank you for linking to that KB Article, as it was basically the answer that Adobe gave me, but I had never seen it explained so nicely.
Appreciated,
Hunt

Is there a way to adjust the width of the pen tools path?

In CS4 and 5, it's super skinny. I appreciate the finesse but I'll be damned if I cant see it sometimes.
Is there a way to adjust a path's (so to speak) stroke while just drawing a path only with no fill or stroke?
I know you can change color dependent on the layer....

Is there a way to adjust the intensity of the camera's flash on the iPhone5?

The flash on my iPhone5 is so strong it overexposes the subjects in my photos, especially people. Is there a way to adjust the intensity of the flash?

NO

Is there a way to adjust the sensitivity of the LG Extravert phone keypad?

having trouble with the keypad entering several of the same letters at the same time. Is there a way to adjust the sensitivity?

Hi Whitehouse,
When the physical keys are entering a letter twice, it will definitely be something with the hardware. Can you verify that the keys appearing twice aren't getting stuck when pressed? You should be able to feel the key returning when the pressure of the finger comes off. If they're getting stuck, please check the charging port and headset jack for corrosion and any other damage to the phone. If the phone is under warranty it may require a replacement. Please keep us posted.
Thank you,
MariaC_VZW
Please follow us on Twitter @VZWSupport

Is there a way to adjust the volume on all clips so they all have the same volume?

Similar Messages

Maybe you are looking for