Is there a way to apply an effect (same settings) on multiple files?

I think the title pretty much says it all. I know that I can create a preset and for the dozen or so files I'm working with now that's not such a big deal, but if I get work through this client I could be working with fifty or so files and the time to open, add the effect, save, and close adds up fast. I've tried saving an applescript but that doesn't seem to work with applying an effect. Any suggestions?

Copy the clip with the effect. Select the clips you want to apply it do. Use Edit>Paste Effects.

Similar Messages

  • Is there a way to apply sound effect to each application?

    Hello, I use x-fi surround 5.1 usb and windows 7-64bit.
    I like to play Elder Scrolls: Skyrim with stone hall EAX effect and winamp playing other mp3s.
    Is there a possible way to apply EAX only to Skyrim game and not winamp?
    It seems that no thread is talking about this issue. I really appreciate if someone gives me directions or hints.

    Hi,
    Sorry I don't think that is possible. EAX effects applies to all sounds when it is enabled.

  • Is there a way to export with the same settings as the preview files?

    I really like the quality of the preview files and was wondering what settings premiere uses by default for creating these previews on a HD project. I also played the mpeg files in VLC and they look just so much better than the highest possible quality h.264 (what I usually use). I did notice however that quicktime doesn't take these files, even with the mpeg component installed.

    Not sure what your question has to do in respect to Apple networking, but if you're asking can you use your Xbox 360 on a wireless network (regardless of the router's manufacturer) to access different Xbox Live! accounts, then the answer is yes.

  • Is there a way to work on the same project from multiple macs?

    I was hoping to save a project that I was working in to the Cloud and then downlpad it to my other Mac. Can't seem to figure it out.

    Not sure what your question has to do in respect to Apple networking, but if you're asking can you use your Xbox 360 on a wireless network (regardless of the router's manufacturer) to access different Xbox Live! accounts, then the answer is yes.

  • How can I/Is there a way to: apply a preset effect to multiple clips?

    I will be editing a music video from this weekend in Premiere Pro CS4, is there a way I can paste a custom preset to multiple clips (selecting hundreds) without clicking each one and pasting/dragging?
    If this can be done it's going to save me hours and hours of work!
    If I try at the moment by CTRL clicking a few clips is only pastes/drags into 1 of the clips, not all of them!
    any help would be appreciated

    Yes, see the section
    Copy and paste clip effects and
    Apply effects to clips in the Premiere Pro Help.
    Cheers
    Eddie
    PremiereProPedia   
    RSS feed)
    - Over 350 frequently answered questions
    - Over 300 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Is there a way to apply LUTS to clips while in Adobe Media Encoder

    is there a way to apply LUTS to clips while in Adobe Media Encoder? We have many  camera clips needing luts applied then wrapped to ProRes422 for editing. right now we are using after effects, rendering out then wrapping in Encoder, but this workflow is quite time consuming.We've tried rendering proRes out of AE but the boss isn't happy with the results without also going through Encoder.

    No, there is not a way to apply color changes (e.g., using LUTs) in Adobe Media Encoder. Do this in After Effects, but just add your After Effects compositions directly to the Adobe Media Encoder encoding queue (e.g., by choosing File > Add After Effects Composition in the AME UI).

  • Is there a way to apply the same transition to many clips at once?

    If there are about 70 clips for a slide show s there a way to apply a crossfade to all of the clips at once?
    Thanks,
    Pete D.

    Make Timeline the active window.
    Press command and A keys to select all clips.
    Press command and T keys to apply the default transition.
    This will usually be a one second crossfade but you can change it to another duration or a completely different effect if you want.
    Link: Changing the Default Transition in FCP

  • Is there a way to apply LUT's to a photo in Lightroom?  Such as .cube, Vision Color, etc.

    Is there a way to apply LUT's to a photo in Lightroom?  Such as .cube, Vision Color, etc.  I have some film stock and Osiris LUTs I like to use for video that I'd love to apply to RAW still photos in Lightroom.  I know it's possible in Photoshop CC but the process would save me time if it's possible to easily do in Lightroom 5.  Anyone know?

    Unfortunately, you can't do it in LR.  You could add your vote and opinion to this topic in the official Adobe feedback forum: Lightroom: Ability to use 3D LUTs.

  • Is there a way to apply a precise value of how round the STBuffer() applies to a geography?

    Hello,
    I am attempting to work on moving my data into SQL Server spatial geography. I have a valid geography and am able to apply a buffer of (150 feet or 0.3048 meters) as shown below.  
    My question is there a way to apply a precision to how smooth the buffer is made ? I currently have MapInfo software and it allows me to apply "25 segments per circle" where the 25 can be whatever I choose (buffer is the red ring shown below which
    appears not as wide as the SQL server buffer above)  Please ignore the cropped portion of the red-line below; however, I was just trying to give a visual of what the buffer looks like now in my MapInfo format...
    Is this possible with SQL Server Spatial?  
    Thanks in advance.
    Nick

    STBuffer won't do this (it has only one parameter), and after looking at the "BufferWithTolerance" and "Reduce" methods, I don't think they'll do this either. In a single method call. However, you may be able to produce the same results
    with a series of method calls. That is, buffering combined with calls to STCurveToLine/CurveToLineWithTolerence and STIntersection or STDifference. Or one of the spatial aggregates. From your current description it's hard to figure out what you're looking
    to do. You're trying to reverse-engineer something in a specific product, so figure a complete description of how it works.
    But, unless I missed something, it will take multiple spatial library calls.
    Hope this helps, Cheers, Bob
       

  • Is there a way to apply the same transition between all clips?

    Or is there a way to apply random transitions? Either way I'm too lazy to drag a transition between every clip and hope there's a bulk way I haven't found yet. I'm using iMovie HD 6.0.2 (267).
    Thanks!
    --Daniel

    Daniel,
    To apply the same transition between all clips, select all the clips, select the transition (and timing) then click ADD (at the bottom right of the transitions screen). The transitions will be rendered, one at a time between all the clips. If you wish to change the transition, again select the required clips, select the new transition, then click UPDATE.
    I'm not aware of any way to apply random transitions.
    John

  • Is there a way to apply Time Remapping to multiple clips simultaneously?

    Is there a way to apply Time Remapping to multiple clips simultaneously? I'd like to uniformly speed up and slow down two different clips that are playing in a picture-in-picture setup. I’m hoping there’s a more elegant way to sync them up than just editing their Time Remapping functions individually (I already tried using an Adjustment Layer. It didn’t work).

    you can try nesting the two clips together, then control the time remapping of the nest.

  • When I stream a movie via Apple TV from my iPad Air into my Samsung TV, I'm getting the "soap opera" effect. This only happens when I use Apple TV, not when I view a movie directly through a cable channel. Is there a way to eliminate this effect?

    When I stream a movie via Apple TV from my iPad Air into my Samsung TV, I'm getting the "soap opera" effect. This only happens when I use Apple TV, not when I view a movie directly through a cable channel. Is there a way to eliminate this effect?

    I'm having the same problem.  It's not an issue with my TV, i've turned this feature off.  I've tried playing with the ATV display settings but nothing works.  When I stream netflix from my Samsung bluray player, I don't get the soap opera effect, but when I stream any video from the ATV, the soap opera effect is there.  I'm thinking it's a choice that Apple made, but I really wish it could be turned off.  Not a lot of people are searching for this, because it can be easy to overlook, but it's driving me nuts!

  • Is there a way to apply an equalizer setting to a bunch of songs at one time?

    Is there a way to apply an equalizer setting to a bunch of songs at one time?

    Nevermind...I figured out a way

  • Is there a way to view the messages I sent along with files in Adobe Send?

    Is there a way to view the messages I sent along with files in Adobe Send?

    Too bad...I wish that feature was still there that was in SendNow...I also have to go and get the recipients email each time I send a file instead of Send remembering the email addresses I have sent to in the past.
    Are any of the great features of SendNow going to be brought over into Send? Or are they just gone...I am a paying CC user...just curious what's going on at Adobe...Thanks for your very quick response though...I guess my message content is gone.

  • Is there a way to play on the same wireless network with 2 different xbox 360 accounts?

    Is there a way to play on the same wireless network with 2 different xbox 360 accounts?

    Not sure what your question has to do in respect to Apple networking, but if you're asking can you use your Xbox 360 on a wireless network (regardless of the router's manufacturer) to access different Xbox Live! accounts, then the answer is yes.

Maybe you are looking for

  • Exception in XML Parsing:Premature End of file.

    Hii I am geting exception in XML pasing in following line doc=parser.parse(new File(sFileName)); if any one kno about this then plz send me solution and reason of this exception. Thanks

  • New to Sun - How to get username and password

    Hi, I bought a computer on a closing company auction, which is Sun Sparc 5 and containing Sun Solaris 8. I am able to boot the computer and it is prompting the user name and password. Neither do I have it nor the company folks had it. Does any one ha

  • Record rejected using SQL*Loader

    I'm not too sure why I'm getting the following error message: Record 1: Rejected - Error on table LOAD_DATA, column CLIENT_NUMBER. ORA-01401: inserted value too large for column Here is my info: Table def: SQL> describe load_data Name Null? Type CLIE

  • Why does text go missing when converting to pdf?

    When I export some pages documents to pdf or print to pdf (my futile attempt to fool the program) a few lines go missing. Makes no sense to me. None of the text is image wrapped (the usual culprit in my experience) and all text minus the header is ty

  • Why does LabVIEW for Lego Mindstorms have 2 Functions Palettes?

    LabVIEW for Lego Mindstorms has 2 separate Functions Palettes.  One of them appears when one creates a VI (.vi) for a Project (.lvrbt), and it appears to contain Mindstorms NXT functions.  The other appears when one creates a stand alone VI (.vi), an