Is there a way to apply the same bumpers to multiple exports automatically?

Hello smart people.
I have an ongoing project in which I am creating hundreds of 60–120 second clips, all requiring the same intro-outro bumper. Every month I make about 125 of these.
Instead of manually applying these bumpers to each and every sequence, I would love to be able to ask Premiere or Media Encoder to find and attach the specified bumpers as a batch.
Is there a way to do this?
Working with the current updated version of CC 2014 (on a Mac).

What work do you have to do to in a Sequence to create the content between the Intro and Outro?
I assume it varies in length beween 60 secs and 120 secs?
I assume you have to select a clip or multiple clips and edit them to whatever duration in a new sequence for each?
If so...I dont see that its many extra steps to drop a 'Bumper' Nest ( fixed asset in Project Bin)  onto Video 1 under the "edit" (Video 2 +) and ripple delete to tighten it up to the content.
Batch Export the Sequences in a Queue.

Similar Messages

  • Is there a way to put the same event on multiple icloud calendars?

    Is there a way to put the same calendar entry on multiple calendars?  I have five children and most of them use their iTouch to keep there calendar.   My calendar is on icloud and I'd love it if they could see only their events but I need to see all of them.   Many of the events affect more than one child.

    As follow up to the above question,  I am the person putting items on the calendars.  I am not just trying to see calendars that they are maintaining. 

  • Is there a way to apply the same transition between all clips?

    Or is there a way to apply random transitions? Either way I'm too lazy to drag a transition between every clip and hope there's a bulk way I haven't found yet. I'm using iMovie HD 6.0.2 (267).
    Thanks!
    --Daniel

    Daniel,
    To apply the same transition between all clips, select all the clips, select the transition (and timing) then click ADD (at the bottom right of the transitions screen). The transitions will be rendered, one at a time between all the clips. If you wish to change the transition, again select the required clips, select the new transition, then click UPDATE.
    I'm not aware of any way to apply random transitions.
    John

  • Is there a way to apply the same transition to many clips at once?

    If there are about 70 clips for a slide show s there a way to apply a crossfade to all of the clips at once?
    Thanks,
    Pete D.

    Make Timeline the active window.
    Press command and A keys to select all clips.
    Press command and T keys to apply the default transition.
    This will usually be a one second crossfade but you can change it to another duration or a completely different effect if you want.
    Link: Changing the Default Transition in FCP

  • Is there a way to develop the same raw file multiple times, each time keeping the final product?

    I've been working with my NEF raw files.  When I import one into LR I can start developing it right away, which I've done.  I also know that the modifications aren't made to the raw file but kept in an XMP file.  Since the I'm not actually changing the raw file do you know if there is a way to make a secondary edit of the file?
    Here's an example.  Let's say I have a raw file and I want to develop it in color.  Then when I'm all done I want to start over and develop it again and black and white but keep the color one as well.
    I know I can undo all the edits I've made but then I lose all that work too.
    Is there a way to develop an image twice and keep both final products?  I know copying the raw file and renaming it is one crude way but I have to believe there's a better, easier way.

    Yes, you can make a virtual copy at any time.
    If you want the virtual copy to be un-edited after you have done some editing to the "non-virtual copy", you could open the "non-virtual copy" in the Develop Module, click on Reset, create the virtual copy, then undo the Reset operation (click on the last real edit in the History Panel)

  • Applying the same ActivationConfigProperties to multiple MDBs

    Is there a portable way of applying the same ActivationConfigProperties to multiple MDBs?
    I think it's typical for many applications to contain MDBs which differ only in the destination name so it should promote ease of use and convention over config to have such a feature, say for JMS 2?
    Motivation for asking is:
    In Jboss 5.1.0 one could use a container defined AspectDomain to define a set of properties that an MDB inherits and overrides at will. This allowed externalization of config properties as well as reuse. This is no longer available in Jboss 7.1.X. and I found myself having to create an ejb-jar.xml file
    that contains
    <ejb-name>MDBName</ejb-name>
          <activation-config>
            <activation-config-property>
              <activation-config-property-name>destinationType</activation-config-property-name>
              <activation-config-property-value>javax.jms.Queue</activation-config-property-value>
            </activation-config-property>
            <activation-config-property>
              <activation-config-property-name>providerSpecificProperty.eg.queueManagerHostName</activation-config-property-name>
              <activation-config-property-value>${departmentA.queueManager.hostName}</activation-config-property-value>
            </activation-config-property>
          </activation-config>
    ...where ${departmentA.queueManager.hostName} is an ant style variable configured in Jboss 7 standalone.xml. There's quite a lot of those provider specific properties that I had to define. Then I had to copy and paste the same configs for all the MDBs I had keeping only the queue name definitions on the MDB.
    I'm not really looking for the externalization in this request since that's container specific but putting the properties in one place to apply them to multiple MDBs could be helpful in the spec.
    One very crude approach would be to allow wildcards on the <ejb-name> values as is allowed for intercepted classes in interceptor definitions (which would make it a request for the EJB spec rather than JMS?)
    Anyone know something I can use now with the current specs that allows definition of config properties at one place and reusing the configs over multiple MDBs?

    I've asked around (and checked the EJB spec), but I haven't found any way to do this.
    Nigel

  • HT204380 Is there a way of using the same FaceTime account on multiple devices?

    Is there a way of using the same FaceTime account on multiple devices?

    Yes you can use the same Apple ID on multiple devices and FaceTime with each one. You have to associate a different email address on all but one of the devices.
    Lets say you have two iPads and two iPods..... All sharing the same Apple ID. When you set up FaceTime on three of the devices, you have to associate another mail address in Settings>FaceTime>You can be reached for Video calls at>Add Another email address. Add a different email address in that setting and let Apple verify the address.
    After that email address has been verified by Apple (they send you an email to that address so look for it in the inboxes of that email account and follow the instructions in the email), then remove the Apple ID email address on each of those three devices. You can use the primary Apple ID email on the fourth device.
    Obviously, you have to have additional email addresses but you can set up free email accounts with AOL, Yahoo, gmail .... and you can use the email address just for FaceTime if you like.

  • Is there a way to have the same music and playlists on 2 separate iPhones

    Is there a way to have the same music and playlists on 2 separate iPhones

    Yes. Create a New User Account on the Computer for the second iPhone.
    See Here  >  How to Use Multiple iDevices with One Computer
    More Info here...
    https://discussions.apple.com/message/18409815?ac_cid=ha

  • Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

    does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

    Several ways to get similar results.  Image > Adjustments > Posturize with low values similar to what you'd use n Cutout.  This is the most flexible way I can think of as you keep the image in RGB mode with layers intact.  A more radical approach would be to reduce bit depth using Indexed Colour.  You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color.  There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
    A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
    Now if only this forum could filter out bizarre content.

  • HT4314 I have two children each with an itouch.  Is there a way of using the same AppleID but giving them separate game centre "me" users?

    I have two children each with an itouch.  Is there a way of using the same AppleID but giving them separate game centre "me" users?

    See:
    Multiple game center accounts for...: Apple Support Communities

  • Is there a way to link the x-axis of multiple graphs in a report? Using DIAdem 12.0

    Is there a way to link the x-axis of multiple graphs in a report?  Using DIAdem 12.0

    What  I am after is this...  If I have multiple 2D axis systems in a report with each y axis showing different channels of a particular data file and with each x axis being the time stamp of that data file, rather than changing the x axis values of each 2D axis system to zoom in on a time slice, I'd like to change only one and have all the others match.  So I suppose yes, I want each of the multiple 2D axis systems to have the same x axis, but I want unique 2D axis systems, not one system with multiple y axis or "n systems".  I'm hesitant to post a sample report as this is a public forum.  Thank you.

  • How can I apply the same crop to multiple photos?

    It is easy to apply the same Adjust settings to multiple photos by using the Copy and Paste in the Adjust pane. Or by using iPhoto Batch Enhancer.
    But can you apply the same crop to multiple photos? I don't see any way to copy a crop. iPhoto Batch Enhancer can do something like it but, being an external editor, it does so on a copy of the photo. I want it on the original photo. (Well, it's not really the original since that one is saved separately in the Library but on the current version).
    Thanks for any suggestion.
    Bo

    Here's how:
    1 - bring up the first photo in the edit window and click on the Crop button or *use the "C" key on the keyboard*.
    2 - set the crop size/ratio in the menu and position the crop window over the photo as needed.
    3 - click the Apply button or *use the Enter key*.
    4 - click on the right arrow in iPhoto or *use the right arrow key on the keyboard* to bring up the next photo.
    5 - click the "C" key to bring up the crop function.
    6 - repeat steps 2 thru 5 for each photo.
    This video screenshot shows how:
    Click to view video screenshot
    Happy Holidays

  • Applying the same transition between multiple clips

    Does any know how to apply the same transition to multiple clips that are all ready in the timeline?  I remember attending an Adobe Premiere Workshop years ago and I'm sure they demonstrated that technique.  It's would be such a time saver.  Perhaps it was a Final Cut Workshop.

    Don't you get something like this:
    That works perfectly for me. Have you updated to CS4 4.1?

  • Applying the same effect to multiple clips.

    I have a piece of video split into parts on the time line. I'm trying to apply 1/ A continuous time code, using "time code generator" and the "viewfinder" effect.
    Is there a way of applying these effects at the same settings to all 3 clips at the same time and also making the time code run continuously?
    I've noticed when i apply these 2 effects to the individual clips with all the same size settings, they appear different on each clip.
    Any ideas?

    If I read your question correctly I would suggest adding the filters to one clip and then copy the clip.
    Then highlight the clips you also want those effects on and control-click and select paste attributes and check "filters".
    Here's the problem though with you wanting to use continuous timecode. The timecode generator won't deliver what you want if you're cutting and moving clips around the timeline. For that you would want to use Timecode Reader instead

  • Applying the same effect to multiple clips in a sequence?

    I have edited a trailer containing multiple clips in a sequence and I want to add the same amount of sharpen to each clip. Is there a quick way of doing this instead of clicking on each clip seperately and applying the effect, adjusting it and so on....?

    If you already have filters applied to the clips, then open the first clip in the Viewer and apply the filter you want - make adjustments as needed. Select all of the other clips in the Timeline that you want to apply the same filter and settings, then drag the filter from the clip in the Viewer to the highlighted clips in the Timeline.
    -DH

Maybe you are looking for