Is there a way to associate what nlm's are used by hw device

I need to move an ultrium tape drive to another server, and the nlm's I found for it are not working. I am thinking I can copy the necessary nlm's from the old server to the new server, but I don't know how to do find that association. Both servers are running 6.5 sp6. Am I way off on this?

Here are the details. I would like to move the Ultrium 960 from an HP Proliant DL 360 to an HP Proliant DL 380. Both are running Netware 6.5 sp 6. Here is the startup.ncf file from the DL 360
LOAD ACPIDRV.PSM
####END PSM DRIVERS####
LOAD CPQSHD.CDM
LOAD IDE.CDM
LOAD NWTAPE.CDM
####END CDM DRIVERS####
LOAD IDEATA.HAM SLOT=10013
LOAD CPQRAID.HAM SLOT=10017
#LOAD LSIMPTNW.HAM SLOT=1
LOAD ADPU320.HAM SLOT=1
####END HAM DRIVERS####
Startup.NCF of the DL 380
LOAD ACPIDRV.PSM
####END PSM DRIVERS####
LOAD CPQSHD.CDM
LOAD IDECD.CDM
#LOAD NWTAPE.CDM
####END CDM DRIVERS####
LOAD IDEATA.HAM SLOT=10008
LOAD CPQRAID.HAM SLOT=10015
LOAD LSIMPTNW.HAM SLOT=201
LOAD LSIMPTNW.HAM SLOT=202
####END HAM DRIVERS####

Similar Messages

My childs ipod touch is missing, someone tried to reset the password around the same time it "Vanished" is there a way to track what WIFI network was used to make this attempt?    We think it was taken at her school and any small info would help!

Trying to find my daughters ipod touch, the last we saw it was around thursday and strangly I recieved an email that the apple id was attempting to be changed and or reset...this was not by me or my wife and my daughter is 7 so i dont think it was her...we think it may have been taken at her school but not sure so what i was wondering was is there a way to pinpiont the wifi network that was used to make this attempt??      If it is then it will be a huge help,              This was a gift from "santa" and finding would really make us happy!!    Thanks for any and all help!!

Trying to find my daughters ipod touch, the last we saw it was around thursday and strangly I recieved an email that the apple id was attempting to be changed and or reset...this was not by me or my wife and my daughter is 7 so i dont think it was her...we think it may have been taken at her school but not sure so what i was wondering was is there a way to pinpiont the wifi network that was used to make this attempt??      If it is then it will be a huge help,              This was a gift from "santa" and finding would really make us happy!!    Thanks for any and all help!!

Is there a way to "see" what font you're using?

Hi,
I'm a bit new to PAGES. I thought when you turn "Show Invisibles" you would see things like what font you're using . . . if it's bold or underlined or italicized - things like that - you would see these characteristics in the body of the document. So if I were writing a paragraph and changed the font in the middle of it, I could actually "see" a symbol indicating the font had been changed. That way, if you wanted to change it back, you could just delete that "invisible" symbol, and change it.
WORD seems to work like that. Is there a way to "see" these symbold in PAGES?
Thanks,
Larry

Thank you, Barry. At least you've confirmed what I thought
Interesting that WORD (which I hate) does such a nice job in this area. When you want to "see" invisible symbols - WORD shows them all to you. I thought it was nice to see exactly 'where' in the document a different font or style might start - that way you can eliminate it there - or change it there - etc. But PAGES, won't even show you. Wonder why they only show you 'some' invisible files?
Thanks, though, for your reply.
Larry

Is there any way to see what Guest connections are active?

The DHCP reservation popup only shows connections with full access. I can't see any way to see who/what is connected using a Guest logon. Is there any way to do this?

You can browse it a little more easily with TextWranger. You can also search it:
http://homepage.mac.com/bagelturf/aparticles/library/libtw/libtw.html
See what happens when you restore a vault:
http://homepage.mac.com/bagelturf/aparticles/vaults/vrestore/vrestore.html
It actually renames your existing library and creates a new one.

Is there a way to know what apple id was used to purchase songs?

I backed up my songs and in order to play them I need to log in with the apple id that was used to purchase them and I don't remember it. Is there any way to figure it out?

If the songs are in your computer's iTunes library then you should be to see the account that bought them - see my reply on your earlier post : https://discussions.apple.com/message/23450213#23450213
If they aren't in your iTunes library then if you try to add them (File > Add To Library), and their account isn't already authorised, then are you prompted to authorise it ?

Why does my mac have 100 gb of "back up" and 90 gb of "other" memory used up when I have hardly anything on it. Is there any way to identify what those things are that is consuming so much memory?

I have 25 gb of music. 20 gb of movies. 5 gb of pictures. 10 gb of apps. 102 gb of "back up. and 85 gb of "other. which leaves less than 70 gb open on my harddrive.. Why? What is that almost 200 gb of memory? How Do i pinpoint it? I use time machine and an external harddrive to back up my files so what is that? any answers or ideas?

architecture12 wrote:
I have 25 gb of music. 20 gb of movies. 5 gb of pictures. 10 gb of apps. 102 gb of "back up. and 85 gb of "other. which leaves less than 70 gb open on my harddrive.. Why? What is that almost 200 gb of memory? How Do i pinpoint it? I use time machine and an external harddrive to back up my files so what is that? any answers or ideas?
Do not worry about the backups. They will be deleted automatically after a week, or if your HD gets too full. See #30 in Time Machine - Frequently Asked Questions.
The "other" stuff is just that -- all sorts of things that don't fall into the few categories listed. The operating system, system work files, plus lots of your stuff like documents, mail, etc. See Lion's Storage Display

Is there a way to edit the characters that are used when a password is generated using Safari?

So, I really like shared keychain. I really do. I also like the option for Safari to generate lengthy and complex passwords. HOWEVER, many of the websites I have tried to use the generated passwords for fail - because of the " - " character. The dash or tack or what ever you want to call it.
I realize that I can just type jumbled nonsense or gobbledegook. BUT, I would prefer to have Safari use specific characters (or at the least, exclude certain characters). Less Fuss, Less Muss.
I have looked in Safari Preferences, and there is not a selection to control password length or useable/excluded characters.
I know of third party solutions (I have 1 Password, and yes - it allows for specifing the allowable content of the passwords), but I'm trying to keep it simple and just use the Apple Tools.
Ok.. Open for suggestions.

No. Create a playlist that you then sync to your iPod, and choose whatever view you wish of the playlist within iTunes.

Is there a way to tell what settings were used to export a PDF?

Is there any way to tell what export settings were used to create a PDF? I'm trying to recreate settings used in a previous PDF.

Most of which are controlled by the Export options used;
Description
    KK Stevens
PDF Preset: CC to PDF for KKSPC-Flattened
Compatibility: Acrobat 4 (PDF 1.3)
Standards Compliance: None
General
    Pages: All
    Spreads: Off
    Generate Thumbnails: On
    Optimize PDF: Off
    Create Acrobat Layers: N/A
    Export Layers: Visible and Printable Layers
    Include Bookmarks: Off
    Include Hyperlinks: Off
    Export Nonprinting Objects: Off
    Export Visible Guides and Baseline Grids: Off
    Create Tagged PDF: Off
    Interactive Elements: Do Not Include
Compression
    Color Images
        Bicubic Downsample at: 300 ppi
        for images above: 300 ppi
        Compression: ZIP
        Tile Size: N/A
        Quality: 8 Bit
    Grayscale Images
        Bicubic Downsample at: 300 ppi
        for images above: 300 ppi
        Compression: ZIP
        Tile Size: N/A
        Quality: 8 Bit
    Monochrome Images
        Downsample at: 1200 ppi
        for images above: 1200 ppi
        Compression: CCITT Group 4
    Compress Text and Line Art: On
    Crop Image Data to Frames: On
Marks and Bleeds
    Crop Marks: Off
    Bleed Marks: Off
    Registration Marks: Off
    Color Bars: Off
    Page Information: Off
    Page Mark Type: Default
    Weight: 0.125 pt
    Offset: 0.125 in
    Use Document Bleed Settings: Off
    Bleed Top: 0.125 in
    Bleed Bottom: 0.125 in
    Bleed Left: 0.125 in
    Bleed Right: 0.125 in
    Include Slug Area: Off
Output
    Color Conversion: No Color Conversion
    Destination: N/A
    Profile Inclusion Policy: Don't Include Profiles
    Simulate Overprint: Off
    Output Intent Profile Name: N/A
    Output Condition: N/A
    Output Condition Identifier: N/A
    Registry Name: N/A
Advanced
    Subset Fonts Below: 1%
    Omit PDF: Off
    Omit EPS: Off
    Omit Bitmap Images: Off
    Transparency Flattener Preset: [High Resolution]
    Ignore Spread Overrides: Off
Warnings

Is there a way to check what I had purchased from the itune store to match the charges on my credit card, because there is a charge that I do not recognize

Is there a way to check what I had purchased from the itune store to match the charges on my credit card, because there is a charge that I do not recognize

http://support.apple.com/kb/HT2727
Regards.

Is There a Way To Show What I've Listened To Recently?

Is there a way to see what I've listened to say in the lat week? I can go to Controls and see recent, I can change my views and see (and sort) when songs were "last played" and I can see the top 25 songs in all history played from my library.
What I'd like to see is what I played in the last week -- what songs I listened to once and which I played over and over. Like the "Top 25 Most Played" but rather "Top 25 Most Played This Week."
Any suggestions?

So-called IMAP email accounts have synchronization in both directions, meaning that if you open an email on one device, it will show open on all other devices as well. By contrast, so-called POP email accounts do not have this two-way sync and result in the results you are seeing, e.g., emails on multiple devices but only showing opened on one device at a time.
Unfortunately, unless you can switch your email to an IMAP account, there isn't much you can do about it.

Is there a way to tell what is actually being passed to DB from PreparedSta

Is there a way to tell what is actually being passed to DB from PreparedStatement? What I mean by that is that I have a PreparedStatement that is a simple
prepstmt = connection.prepareStatement("Insert into table (col1, col2, col3, .... colx) values (?,?,?....?)");
(there are x ?s)
I precompile this, and later, when there is a connection I call set all the variables
prepstmt.setInt(1, someint); prepstmt.setString(2, "\\'" + somestring + "\\'"); etc... prepstmt.executeUpdate();
I get back an exception thrown by Oracle complaining that one of my values is too large for the column (but doesn't say what column/value).
So I made a string that contains what ought to be the same query
String debug = "Insert into table (col1, col2, col3, .... colx) values (someint,'somestring',etc....someotherint)"; System.out.println(debug);
I give the printed out line directly to Oracle through SQLScratchpad and it works just fine in there and I can confirm the row has been inserted. Nothing is too big.
Is there a way to look at what the PreparedStatement actually has as values in there? I found I could look at the original statement (the one with the ?s) if I expand the prepstmt object in the debugger's (Eclipse) view, but nothing to show me where the values were filled in.
Thanks for any help you can give me.

Hrm, I'm suspecting that perhaps it has to do something with setting CHAR fields. Some of the fields in this table are CHAR but I don't see a call in my PreparedStatement that can set a char, only a String, so that's what I've been using, but it may be that that's not the right thing to do. I'm running Java 1.5.10, and looking through the API there doesn't seem to be anything specifically for char.

Is there a way to view what is running on the Q10?

I know about closing apps open in the HUB, but is there a way to see what processes or programs are running on a Q10? I am watching one of our phones drain slowly just from sitting. Only thing running is our phone network. Maybe its syncing too often with our server? I am not sure how to see that to check. Other than that, the phone is passive. Any suggestions?

Are you a developer?
On BB10 v10.2 a list of running apps can be seen under the settings,
If you can run Momentics then it is possible to use the diagnostic capabilities to watch what processes are running.
If not then there are some apps on the market which can monitor battery drain for you.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Is there a way to tell what folders/images I placed in my trash today? specifically by date of entry into trash?

I inadvertently deleted 6 folders from picasa which also deleted them from my Mac. i have so many items in my trash that I do not know which they were....is there any way to track what items I placed in my trash only on today's date? since I have no clue what they were specifically.

which also deleted them from my Mac.
By the way, the items are not deleted until you empty the trash - which you should do occasionally because they all take up room on your hard drive. I don't know of a way to do exactly what you want - you can try looking at your trash in column view and it will show you the last time you modified or opened a file - that might give you an idea.

Is there a way to know what report is being processed ?

In XI R2 / Webi Report Server, or XI 3.x / Webi Processing Server, is there a way to know what object is being processed ?
For example currently, I can see thru system tool like "Process Explorer" that "wireportserver.exe" has been using a lot of CPU and increasing memory for several minutes. I feel that a report is too large or complicated, but which one ?
In audit database, I can only see events like "document read", but no "begin of refresh process".
So, do I have to wait for the process to be finished to find a "document refreshed" and know what was going on ?
Moreover, at least in R2, if user cancels his refresh request (by closing his browser for example), of if request takes too much time and reaches timeout, no audit event corresponding to this refresh request will ever be recorded. In this case, I have no information at all about what report was making the report server taking so much CPU and RAM. It has just a "read" event, but so have a lot of other reports having been read during the same period of time.
Ideally, I would just have to select the latest "begin of refresh" events without "end of refresh" to know which report are currently being processed. But unfortunately the first one doesn't exist.
Has anyone an idea to get this information anyway ?
Thanks

Hello Seb
Thanks for your reply.
I was aware of this instance manager in 3.x.
In R2, I was also able to do the same with a request thru the query manager.
Unfortunately in both versions , I haven't found yet how to find informations on report being refreshed by users directly, and not by job server.
I anyone has an idea...
In R2 I have tested the -trace option of report server : it generates a big amount of lines in trace files, but that seem completely useless : no information on what report is being processed..
I don't understant why this information is so complicated to get. It could be so helpfull...
regards
François

Hi All, I have two questions. First of all my CS3 is saying that it is installed on more than one machine, is there a way of seeing what machines my serial number is registered to? If i want to buy another CS3 serial number how do i go about it? I cannot

Hi All, I have two questions. First of all my CS3 is saying that it is installed on more than one machine, is there a way of seeing what machines my serial number is registered to? If i want to buy another CS3 serial number how do i go about it? I cannot afford to move to the creative cloud.....

there's no way for you to identify which machines have or had cs3 activated, and you can no longer purchase a cs3 license from adobe.
you can request an activation count reset (Contact Customer Care) and deactivate your cs3 on all your computers. you can then install and activate on up to two computers.

Is there a way to associate what nlm's are used by hw device

Similar Messages

Maybe you are looking for