Is there a way to auto-configure the optimal screen settings for a macbook pro running windows 7? When running Lion the screen looks 10x better.

Just like the title reads. 2011 MBP Quad Core 15". Used boot camp to instal Windows 7 Home premium but screen resolution is bad. Thank you

No. Reopen Boot Camp Assistant and click on the Continue button. You'll see in that screen a checkbox to download drivers. Check that box and uncheck the other boxes. Have a freshly formatted USB flash drive or hard drive connected. Must be partitioned MBR and formatted FAT32. You can format it while in Windows. Have it connected when you use Boot Camp Assistant. Once you click on the Continue button again BCA will attempt to download the drivers.
Once you have the drivers boot Windows. It should autorun the installer you downloaded after Windows gets itself settled in.

Similar Messages

I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

Depends on what you had
If you had iPhoto version 9.5.1 then you can reinstall from the app store under purchases
If you had any version of iPhoto '11 then you can install for free from the App store
If you had any earlier version of iPhoto (iPhoto '09 version 8.x.x) or older then you need to purchase iPhoto '11 version 9.x.x from the app store
If you had iPhoto '08 (version 7.x.x) or older then you also need to download and run the iPhoto library upgraded prior to launching the new iPhoto
LN

Is there a way for my macbook air (running Lion) to access an external hard drive on my Imac (running snow leopard) specifically for Iphoto and itunes?

Is there a way for my macbook air (running Lion 10.7.2) to access an external hard drive on my Imac (running snow leopard 10.6.8) specifically for Iphoto and itunes?

Yes. For those two applications specifically there is sharing. This presumes both computers are on and connected to the same network.
In iPhoto, enable sharing by (on the iMac) going to the iPhoto menu > Preferences > Sharing > check Share my photos. You can either share the entire library or only selected albums. Now on your MacBook Air, in iPhoto, go to the same preference pane and select Look for shared photos.
iTunes has something similar. In the iTunes menu > Preferences > Sharing > check Share my library on my local network. On the other computer, look in the left column for SHARED and select the iMac. You can now play that music on the MacBook Air.
There are other ways to share files but for those two applications this is the simplest way.
Best of luck.

TS1367 Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

Hello eassic,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like Target Display Mode may be what you are looking for:
Target Display Mode lets you use a Mac as the external display for another “primary” Mac. In some cases, you can also play the sound from your primary Mac on the speakers of the external Mac. For example, a MacBook Pro could use a 27-inch iMac as the display and play its audio on the iMac as well.
OS X Mountain Lion: Use another Mac as a display
http://support.apple.com/kb/PH11302
Use an iMac with Thunderbolt as a display
If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
1. Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
2. Make sure both Mac computers are turned on and awake.
3. Press Command (⌘)-F2 on the keyboard of the external display Mac.
4. If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.
Thanks,
Matt M.

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

My macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty.

my macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty. I had to try myself as I'm overseas for two months and nowhere near any sort of help .

there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

I have a new macbook pro running lion and want to update the software on my ipod touch. My old macbook ran 10.4.11 and won't update - but the new computer says I have to update on the computer I normally sync on or my music will be lost. Solution?

I have a new macbook pro running lion and want to update to ios 5 on my ipod touch. My old macbook only has 10.4.11 and can't be updated to lion - and won't update my ipod touch to ios 5. But the message on my new macbook pro says I have to update on the computer I normally use for syncing or my music will be lost. Is there any solution for this?

try exporting your iTunes libary from the old computer to the new one
take a look at this from apple
http://support.apple.com/kb/HT4527
I am not sure you have home shareing with 10.4.11 but if you do it works very nicely
Mike

My Macbook Pro running Lion 10.7 will no longer connect to either my HP or Epson printers. Both printers report that they are connected to the correct wireless network and until 2 weeks ago work perfectly.

My Macbook pro running Lion 10.7 will not connect via a wireless network to either of my printers, Epson and HP. Both printers report an excellent connection to the correct network. The Macbook reports "printer not found"
Until 2 weeks ago all worked well. Both printers makes me think some setting in the computer must have changed.
Any suggestions?

System Preferences>Fax & Scan. Delete the printers and re-add them back in.

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Maverick for everything but the dictation software. I'm a new pie to apple

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple

To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

Is there a way to Auto add the / while inputting a date into a textfield

For example, if typing a date into a text file, is there a
way to automatically add the /'s to the date as it's being
typed?

Scooby Doobie Doo wrote:
> For example, if typing a date into a text file, is there
a way to automatically add the /'s to the date as it's being typed?
Yes

HT4889 Is there a way to abort a transfer of data from an old MacBook Pro to a new one when you're using Wi-Fi?

Is there a way to abort a transfer of data from an old MacBook to a new MacBook Pro when you're using Wi-Fi?

If you are sure you want to to do it: command + option + esc, then and Force Quit.
ethernet is much faster than wifi.

I have screwed up a bunch of settings etc. on macbook pro running preinstalled lion. I think I should is to wipe the computer and reinstall to start over again. I will loose nothing of importance except a few passwords. Is this wise? How do I do it?

I have screwed up a bunch of settings, folders, photos, etc on my macbook pro running factory installed Lion. To get everything straightened out, I was thinking I should do a delete and reinstall and just start over like it was a brand new computer. I will only loose some usermane and password info and my history and cookies. There is nothing else on the computer that is not on another device somewhere. Does this sound like the right thing to do? I cannot seem to find ways to correct the problems indivdually, though I am sure they are there. If so, how do I do it? My computer did not come with any type of disc, I do not believe. Thanks in advance for anyone's help!

Yes, that sounds reasonable.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the left side list.
      Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
        and set the Zero Data option to one-pass. Click on the Erase button and wait until the process
      has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

The volume control on my MacBook Pro (running Lion) is not working

All of a sudden I lost the ability to move the volume slider for my MacBook Pro internal speakers. It's permanently set to mute. I can't figure out! Every time I go into System Preferences and click "Sound" I get the spinning beach ball of death and crash out. Every time! Don't know where to go from here. Maybe my problem is bigger than the audio thing, but everything seems relatively ormal aside from this.
If anyone has any insights, I'd really appreciate it!
Thanks

I sggest you reset the PRAM:
http://support.apple.com/kb/HT1379
Ciao.

Is there a way to auto resize the active buffer in vim?

I use vim as my main code environment, and often have some vertical splits with multiple files. Is there a way that I can make it such that when I enter a buffer and it becomes active, that it will automatically expand to at least 80c wide? And that it would also skip non-file windows like taglist?

For options on resizing a window, type ':help ^W' for the full list. In the meantime, play with
Ctrl-W +
Ctrl-W -
Ctrl-W <
Ctrl-W >
Ctrl-W =
Ctrl-W _
As for automatically 80c, you'd might need to write a vim script or check if one already exists.
Last edited by saline (2010-06-08 16:27:38)

Is there a way to Auto-Fill the Album Artist field for an entire library?

The same way that iTunes can "Get Album Artwork" or "Get Track Names" is there a way to "Get Album Artist"? iTunes automatically added some, but my 2 year old daughter was playing on my computer, and the next thing I know, the whole column was erased. Any solutions to autofill this?

Re: too many numbers
In a helper column enter a rounding formula and fill down...
=ROUND(A2,2)
Copy the helper column and paste Values over column A.
Jim Cone
Portland, Oregon USA
free & commercial excel programs (n/a xl2013)
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

Is there a way to auto-configure the optimal screen settings for a macbook pro running windows 7? When running Lion the screen looks 10x better.

Similar Messages

Maybe you are looking for