Is there a way to automatically back up Photostream to my Mac?

I have passed the 1000 photo limit in photostream, and I want to find an automatic way to back up any new pictures to my mac. I realize that I can plug my phone into the computer and import them into iPhoto, but I use many different devices and would prefer if they backed up automatically. I also don't want to have to remember to go into "My Photo Stream" to import them, because I might forget.
This seems like something Mac would be good at, but I can't find the way.
Cheers,

Do you have OS X 10.7.5 or later and either iPhoto '11 9.2.2 or later, or Aperture 3.2.3 or later, you cando this by signing into your iCloud account in System Preferences>iCloud and enabling Photo Stream, then going to iPhoto>Preferences>Photo Stream (iCloud) and checking Automatic Import. After doing so, photo stream photos will automatically be imported to your iPhoto library where they will not be deleted.

Similar Messages

Firefox 7 automatically downloaded and this version is not compatible with my university's website. Version 6 did work. Is there a way to go back to version 6?

Firefox 7 automatically downloaded and this version is not compatible with my university's website. Version 6 did work. Is there a way to go back to version 6?

Try downloading and installing 6.0.2 from here:
http://www.oldversion.com/macintosh/download-Firefox-6.0.2.html
In Firefox preferences/advanced/update uncheck download and automatically install updates. Instead check ask me what to do.

I have an external hard drive set up as a Time Machine backup on my IMac. I want to add a second external hard drive and put my Aperture Photo Library on it. Is there a way to have the photos on this second hard drive automatically back up to the Time Mac

I have an IMac with an external hard drive set up as a Time Machine for automatic backups. I want to add a second external hard drive and load my Aperture Photo Library on to it so that the library can be shared by both me and my wife. Is there a way to automatically backup the photo library that will be on the second hard drive to the Time Machine hard drive?

Open System Preference > Time Machine
Click Options....
Ckick on external disk in list and hit the - button below the list to remove from the Exclusion list
Allan

Is there a way of reverting back to previous firefox version

I use firefox extensively for development. I use firebug and dojo. It seems that the new version (Firefox 4) is far slower than the previous version and sometimes hangs completely. I believe this may be caused by Firebug doing a lot of work but it never used to happen. Also firebug doesn't quite seem to work as well with dojo script. Previously if you did a dojo.require to drag in a js script file then you could automatically see it through firebug. Now have to put files I want to debug with script tags. Is there a way of reverting back to previous firefox version?

No need to re-install plugins or extensions.
You can install them both but there are a few steps to take.
When you install the second version of Firefox use the custom installation option and choose a different location to install Firefox.
In order to use both versions, you need to create a new profile for the second version of Firefox (Firefox stores user data in the profile). Using the same profile with different versions can cause problems. Once you create a new profile you can copy certain data such as bookmarks and passwords between them. You can also use Firefox Sync to keep the profile synchronized. Finally, you will need to set up shortcuts to launch the correct profile for each version.
The following links show how to do this:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
* https://addons.mozilla.org/firefox/addon/firefox-sync (only needed for Firefox 3.6, it is built into Firefox 4)
An alternative way of testing Firefox 4 is to install the portable version on your hard drive. It will use its own profile folder and not interfere with the other version of Firefox. You can get the portable version from http://portableapps.com/apps/internet/firefox_portable

When closing multiple tabs, is there any way to get back the option of saving those tabs OR NOT for your next session, within the warning dialogue box itself?

For brief period of time, not in FF4, there was the option whereby when I closed multiple tabs, a firefox dialogue box opened warning me that I'm about to close multiple tabs, '''AND ALSO''' asking me if wanted to save those tabs for my next session, or trash them.
The primary issue IS NOT about saving tabs. The primary question here is about getting THE OPTION back to the CLOSING MULTIPLE TABS WARNING DIALOGUE.
The use case here should be obvious. However, since it is clearly not obvious that different people work in a variety of ways, and neither of those methods of working is "wrong" or "right" I will elaborate: Some people, for whatever reason, it doesn't matter why, want to save all their tabs on some occasions, and on other occasions don't.
This preference varies throughout the day. Therefore it is inefficient to constantly go to preferences and change whether or not I want firefox to open all my tabs from my last session. It is more LOGICAL to place an option in the multiple tab warning dialogue as well, for people whose preference constantly changes.
This option was available for a time in most of the Firefox 3 versions. Is there any way to get back this option in Firefox 4?

Firefox 4 saves the previous session automatically, so there is no need for asking if you want to save the current session.
You can use "Firefox > History > Restore Previous Session" to get the previous session. 
There is also a "Restore Previous Session" button on the default about:home Home page.
You can set the warn prefs on the about:config page to true via the right-click context menu or toggle the value with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

When downloading iTunes onto a new computer, is there any way to automatically import old music files? Last time I got a new computer I didn't have to use an external drive to update my music library.

When downloading iTunes onto a new computer, is there any way to automatically important songs from your previous computer? I recently cracked the screen on my computer and cannot access any files. Last time I got a new computer my iTunes media files automatically appeared in my iTunes when I downloaded it, and I did not have to use my external drive. Is this still possible?

If your backup copy of the old computer was not stolen, then use it to put everything back.

Is there a way to get back a previous iTunes backup file than the most recent Backup?

I did a manual backup and wanted to restore the iPhone, but iTunes forced me to update the iPhone before allowing me to restore the iPhone...
After updating, I realised that iTunes created a backup automatically without confirming with me, and now the latest backup file is not the one I wanted.
Is there a way to get back the backup file I manually backup?

Is there a way to get back a previous iTunes backup file than the most recent Backup?
No, to the best of my knowledge the device backup area is simply updated with new information each time the device is backed up so there are no previous versions preserved. Once a backup has been used to restore a device however it gets locked and dated so that you could return back to that snapshot at a later date.
Your manual backup should have simply updated the backup with any new data since the last automatic backup. Upgrading should not have overwritten a backup taken just before the upgrade with a, presumably, empty state. Have you actually tried to restore the current backup that is available? It may have what you want after all. You might like to try backing up the current state of the device to iCloud first, or if you have access to another computer back it up to that.
N.b. I always disable automatic syncing of devices so that I am in better control of when data starts to be written, and in which direction it flows.
ttt2

I want to reinstall os X yosemite on my macbook Air but i erased the hard drive and i cant get the local recovery option; only internet recovery; is there any way to go back and get local recovery option?

i want to reinstall os X yosemite on my macbook Air but i erased the hard drive and i cant get the local recovery option; only internet recovery; is there any way to go back and get local recovery option?

Hi Bockworld1,
I'm afraid you did an error when erasing your hard-drive, this has automatically erased the "local recovery". In order to pass-by this, you must use a former Mac OS X installation DVD (such as Snow Leopard 10.6.3) and then when updated to 10.6.8 you may access the Mac App Store to recover the Yosemite Installer and proceed to a fresh "update" OR creating a Bootable USB Installation drive with DiskMaker in order to alway get a installation copy.
I also suggest you to create a USB Basic Operating System (you must select a local USB device to install Yosemite or whatever OS you want) with only the base operating system to launch your computer in case of Main Operating System issues.
Given the amounts of issues reported by users with 10.10.2, I command you to download 10.10.2 version to get a stable OS working.
Let me know how it is going.
Good Luck.

When capturing footage is there a way to automatically create new clips...

When capturing footage in Final Cut Pro is there a way to automatically create new clips like it does in iMovie. I have to capture over 9 hours of footage and I dont want to spend the time logging each clip. I also dont want to just capture the whole tape then go back and log each clip. I really like how iMovie automatically creates a new clip each time the rec/pause button was pushed. is there anyway I can get Final Cut to do this??????

You can capture the complete clip and then apply Mark > DV Start/Stop Detect over the captured clip. You could get the best of two worlds so: smooth capture and clips creation.

They changed the way we see our appointments. That's awful! Is there a way to chnage back to the "old" way when you could see all your appointments at a glance????

They changed the way we see our appointments. That's awful! Is there a way to chnage back to the "old" way when you could see all your appointments at a glance????

Maybe I'm fool, but how I get the "day view"? I have three options on the top line, an icon that seems a computer (a square and two lines), a magnifying glass to search a especific item and a "plus" to add appointments. The "day view" isn't any more there - that's the point!!! Using the first icon a get the full month-that uses 2/3 of the screen- and two lines of appointments...To see the rest I have to slide up and down the two lines taking care to not touch the month...

Is there a way to automatically add another of the same page while a form is being filled?

Is there a way to automatically add another of the same page while a form is being filled?
I have a two-page form of which the second page is essentially a spreadsheet analog. Often, there is need for for more lines than are available on the page. Is there a way in which to add another or even multiple copies of the second page?
Thanks ahead...
TG

You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car. my car is a 2013 mercedes E350. Is there a way to go back to an older version of the itunes software?

I have an older ipod...ever since I updated the itunes software my ipod no longer works in my car. my car is a 2013 mercedes E350. Is there a way to go back to an older version of the itunes software?

If it's an older iPod, its software is not being updated by Apple. So, I don't see how updating iTunes would make the iPod not work with the car's audio system, since iTunes just updates the song files (not how the iPod operates).
Does the iPod work by itself (play songs), when disconnected from the computer and iTunes?

Is there a way to automatically insert the filename in the footer of a spreadsheet using iWork's numbers 3.2?

Is there a way to automatically insert the filename of a spreadsheet into the footer when using iworks numbers 3.2? iworks 09 had this feature and I can't find this feature in the new version of numbers.

Hi rhyolite,
In Numbers 3.x, The Print View and Layout View have gone (for now at least). Page Headers and Footers can only be reached under Menu > File > Print... to open Print Preview. Hover the cursor to reveal the Page Header and Footer fields.
The only inserts that I can get to work in Print Preview are Page Number, Page Count and Date & Time. Filename is no longer in the Insert menu.
Regards,
Ian.

Is there a way to bring back the "Open a New Tab" option via right-clicking on the Tab?

I just upgraded to latest version of Firefox (6.0). Yesterday it informed me that an upgrade to Firefox 5.(something) was available and asked if I wanted to upgrade. I went for it. However, I hadn't used it since then till today. Now when I opened it today it asked me if I wanted to upgrade to version 6.0. Without hesitation, I went for it too.
While this version looks nice, it feels a bit odd to use it. Previously whenever I wanted to open a new Tab, I right-clicked on any of the Tabs (active tab or any other Tab) and after right-clicking, it had the option to '''''Open a New Tab''''' along with few other options. Now there's no such option. There's the + button to open a new tab, but what if I want to open a link in a new tab by right-clicking on it? Similarly the option to Open in New Window is also missing.
Is there a way to bring back those previous Tab options/settings? If yes, how?
P.S. In my bookmark toolbar, when I click on a bookmark icon, it has the same options/settings as it previously had in the last version I used (last version I used was 3.something; while I'd upgraded to version 5.something I hadn't used it except for opening the browser when it asked me to upgrade to version 6.0). Options on right clicking the bookmark icon are:
Open
Open in a New Tab
Open in a New Window
New Bookmark...
New Folder...
New Separator
Cut
Copy
Paste
Delete
Properties
I'd also like to mention here that I know of the shortcut keys; so please don't waste your time by trying to help me that way. Thanks.

No. The Tab bar is a regular toolbar in current Firefox versions, so you get the normal right-click context menu of a toolbar if you right-click the tab bar.
You can double click on empty space on the tab bar to open a new tab if you do not want to use the new tab button. 
You can drag a link on that new tab button to open that link in a new tab. 
You can also drag the new tab button on another toolbar if you would like that better. 
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

Is there a way to automatically back up Photostream to my Mac?

Similar Messages

Maybe you are looking for