Is there a way to automatically change tabs with different times set for each tab?

I found a few add-ons that will automatically change tabs based on a configurable time. But all the tabs use the same time setting. What I need is the ability to have tabs displayed for different amounts of time. Ex, Tab 1 for 30 seconds, Tab 2 for 10 seconds, Tab 3 and 4 for 5 seconds. Ideally, I will have the ability to modify these settings as the amount of tabs and the content will change a couple times a week.
Currently I'm using Tab Slideshow with each tab displayed for 15 seconds. But it sounds like Tab Rotate and Auto Toggle Tabs essentially do the same. If there is already a solution that would be great but if not is there someone available for hire to help modify one of the existing add-ons? Thank you in advance for your time.
John

Currently Firefox don't have any options like that.
You can ask the Addon developers
*http://addons.mozilla.org/

Similar Messages

Spry tabbed panels - Different Hover Class for each tab

Already posted this in the general Dreamweaver section, but just realized there was a specific Spry section. So, my apologies for the repost.
I'm setting up spry tabbed panels, and I'm wanting to use an image for each tab, with the text already on it. I've figured this much out by creating a different class for each in the spry tabbed panel css.
However, I'd also like to have a second hover image for each tab. I'm having trouble figuring out how to set up separate classes for each tab's hover state.
Any help?
Thanks.

Just in case you did not notice the announce at the top of this forum's main page, I have copied it here.
Announcement: New to Spry, or the Spry forums?
Hide Details
Before you post a topic please verify that:
You are using the latest Spry files
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
Your question was not asked before
Using the search functionality on forums you can easily find out if your question has been answered before. While you are in search, you can specify the search locations. The Spry forum can be found under:
Adobe Labs > Spry Framework for Ajax
Yoru question can not be found in the existing documentation
Spry provides you with allot of documentation this can found on different locations. In the sidebar of this forum you can find a small summary of resources that will help you on your way.
If these options do not apply to your question, please be so kind to also supply the following information in your topic together with a clear description of your issue:
What browsers does this issue occure:
example: Internet Explorer 8 on Window 7 and Firefox 3.0 on Mac OSX
What version of Spry are using:
example: Spry 1.6.1 ( the version number can be found in license header of the .css and .js files )
What is the url of your website or page in issue:
example: http://www.example.com/page/in/issue.html
Step to reproduce the issue:
example: Scroll down till you find the header "help", there you will see a Spry Accordion. When you click on it it will not open or close.
So users can provide you with a better answer, without having to ask you for further details.
by Arnout Kazemier at Oct 23, 2009 2:47 PM
landon_tc wrote:
Actually, I do remember posting that, and have updated it with what worked for me. However, I could not recall posting it in a specific ajax spry forum, so I assumed I just posted in the general forum. Hence the current situation.
Yeah and my name is not Ben Pleysier.
landon_tc wrote:
Any help with the current problem?
Please have a look at this thread http://forums.adobe.com/message/2662019#2662019
I hope this helps.
Ben Pleysier

Are there any ways to get sequence number other than getting it for each re

are there any ways to get sequence number other than getting it for each record

CACHE is the number of values Oracle stores in memory. So the first call to NEXTVAL Oracle grabs x numbers; subsequent calls to NEXTVAL are served from memory until they're all gone and them another bunch is grabbed. The attached sql*plus output demonstrates this behaviour.
Note that normally unused numbers in the cache are returned to the data dictionary but in exceptional circumstances (DB crash) they may be lost.
Cheers, APC
SQL> create sequence seq cache 3
2 /
Sequence created.
SQL> select last_number from user_sequences
2 where sequence_name = 'SEQ'
3 /
LAST_NUMBER
          1
SQL> select seq.nextval from dual
2 /
   NEXTVAL
         1
SQL> select last_number from user_sequences
2 where sequence_name = 'SEQ'
3 /
LAST_NUMBER
          4
SQL> select seq.nextval from dual
2 /
   NEXTVAL
         2
SQL> select last_number from user_sequences
2 where sequence_name = 'SEQ'
3 /
LAST_NUMBER
          4
SQL> select seq.nextval from dual
2 /
   NEXTVAL
         3
SQL> select last_number from user_sequences
2 where sequence_name = 'SEQ'
3 /
LAST_NUMBER
          4
SQL> select seq.nextval from dual
2 /
   NEXTVAL
         4
SQL> select last_number from user_sequences
2 where sequence_name = 'SEQ'
3 /
LAST_NUMBER
          7
SQL>

Is there a way to backup a PC with the Time Capsule?

Is there a way to backup a PC with the Time Capsule?

Yes, but unfortunately not with Time Machine. You could; however, use any PC backup product that supports network drives as a destination for their backups. One such product is Genie9's Genie Backup Manager Home.
Genie9 offers a similar option for Time Machine for PCs, called Genie Timeline Home. It is advertised to support backups to "NAS and network storages," but several folks who have this reported that it wasn't able to backup to a Time Capsule. If you decide to give either Genie9 product a try, please be sure to give their trial versions a go to make it works for your situation.

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

Itunes provides the option for setting the Start and Stop times of each music track. However, the start and stop times do not synchronize to the iPhone. I don't understand why this option is even available as it doesn't work when listening to music on the phone. I have not found another application that will support the start and stop time markets. I have searched quite a bit for this but can't find anything. I hope we can find something.

If I have multiple tabs, the history is not for each tab, so if I drop down it shows history from other windows too, possibly eliminating all history for the current window. How do I get each tab separate?

The drop down list when the History menu option is clicked, has only provided history information for the tab currently being used. (You could go to all history of course and it was cumulative). It is now showing cumulative history for all tabs including for other Firefox windows if I have more than one copy running.
Is there an option to separate the histories for each tab again?
I do not know if this is because of Windows 7. This computer is new as my previous one was stolen and they no longer sell XP versions or Vista versions.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
Windows 7 build 7600 - all updates current.
My e-mail is [email protected]

I use that add-on. Works great.

Is there a way to automatically generates videos with adobe premiere ?? from adobe premiere template

hi
i have a products introduction video and i would like to generate a video with the same template (but of course change the attributes for each and photo...)
instaed of doing it manually for a thousand products thanks a lot

Yep that's the software.
I have it and use it for my images, far less hassle than PP.
Idiot proof, hence why I love it
Col

HELP PLEASE! Is there a way to turn on my Find My Phone setting for my lost phone so that i can track its location?

Last night i lost my iphone 5C. I have talked to AT&T multiple times today, and it seems that i cannot use the " find my phone " app from another device to locate mine because i did not have that setting enabled before i lost it. Is there anyway to use my icloud account to turn that setting to ON so that i can track my device?

You can only turn that on while it is in your possession by going to settings > iCloud and turn Find My ON

Is there a way to sync two clips with different bit rates?

I have two clips from different camcorders of the same frame rate but slightly different frame rates. When trying to sync the 2 clips, it's nearly impossible because the frames aren't lining up. Is there anything I can do?
Where I'm trying to sync the two clips is kind of between frames.
Thanks,
Bob

Hi
I only know of miniDV tape Cameras and SD-Video quality - and I use an external program to do this.
JES_Deinterlacer (free on internet) - Mainly I use it to go from PAL (25fps) to NTSC (29.97fps).
It does this so much better that just dropping into TimeLine in FCE/P or switch when going from iMovie/FCE/P to iDVD. They both does a sort of conversion - but the result has to me been very choppy/jumpy and not enjoyable at all.
There are even better conversions - But those are Pro applications and costs are astronomical - and the end result is not that much better at all.
Yours Bengt W

Navigation bar different colors for each tab

I want to have the top horizontal navigation bar with different background colours for each tab on the bar.
I don't want to change the background colour for the entire navigation bar. How do I change them individually?
thanks!

Hi lorrscorpio,
As far as I know it is difficult to change background color of top navigation link OOTB, better to create a html menu for that and add it to your page .In that you can easily change background color of your top navigation link.
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever you see a reply being an answer to the question of the thread, click "Mark As Answer

Is there a good way to automate changing existing links to external PDFs to instead be to PDF attachments with same names?

Greetings!
Can anyone tell me a good way to automate changing a "main" PDF's existing hyperlinks to external PDFs to instead be links to PDF attachments to the main PDF (the attached PDFs to have the same filenames as the external PDFs) ?
Format of current link in main PDF:
Go to a page in another document
File: C:\\path\filename.pdf
Destination name: P:1
When link is manually changed to link to a PDF that has been attached to the main PDF:
Go to a page in another document
File: PDF attachment
Page: 1
Zoom level: Fit page
The new PDF link does not list the PDF attachment filename in the link.
The main PDF (the one that has the links that I would like to automatically change) is generated with the hyperlinks to other PDFs from Adobe FrameMaker 11. In FrameMaker11, we added special marker text "openpage filename.pdf:1" that is "automatically" changed to be hyperlinks to external PDFs when the main PDF is created (postscript file is processed) by Adobe Acrobat Pro 11.
My first choice is to be able to change the format of the special marker text in Adobe FrameMaker source file, but I have not found way to specify a link to be to a PDF attachment with a certain filename.
However, I would also really like the option of running a batch file on a main PDF to change the links there.
Has anyone tried using that Adobe ExtendScript ToolKit CS6 to do this? That is, a script that could automatically modify the hyperlinks in a PDF to link to PDF attachments rather than external PDFs, or else modify the unprocessed links while they are still in Postscript file format, or else modify the marker text in FrameMaker to instead of creating a link to a PDF in the same directory as the main PDF being processed, to create a link to a PDF attachment files?
Thank you,
Judith Wallace
[email protected]

FrameMaker's Hypertext feature has no ability to "link" to an attachment on/in a target PDF.
PDFs sourced from FM can have named destinations set in the FM authoring files such that a link from file01.fm to the specified named destination in file01.fm will be functional in the PDFs created from the FM files.
Then, of course, there's the dynamics possible by use o FM Books. But that's the grist for the mills at the FM user-2-user forum.
RE: Scripting - PDF scripting is via Acrobat JavaScript. That something still of and by Adobe although it may migrate to an ISO Standard (or be rolled up in a future ISO 32000).
So, to the point - look to Acrobat JavaScript for scripting.
Be well...

Is there a way to automatically refresh a webpage in Firefox 3.6.10?

hi there,
I am hoping the Firefox team can help with a small problem, is there a way of automatically refreshing webpages within Firefox 3.6.10 and 4.06 beta? We are building an interesting website at the moment and the client is using Firefox 3.6.10to view the site. Each time they go onto the new website to see the changes we have done, they are shown old pages. We need to rectify this problem as quickly as possible, for our client without requesting that they refresh the page each time they go onto the site.

You can do that by changing a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# In the filter box type '''browser.cache''' to bring up a small number of preferences
# Double-click on the preference '''browser.cache.check_doc_frequency''' and change its value to '''1'''
For more details on that preference see http://kb.mozillazine.org/Browser.cache.check_doc_frequency

Is there a way to find/change the font of numericals only, within a document in indesign?

Is there a way to find/change the font of numericals only, within a document in indesign?

It might not be what you need for this document, but if you were creating it from scratch, a GREP style would probably be the way to go. That way, new figures added to the text will automatically be styled the way you like.
Start with a base Paragraph Style (i.e. 'Body') that all subsequent styles ('Heading' etc) are based on. Select a figure, and apply the font and any other attributes required. Select it and make a new Character Style. In your Paragraph Style, go to GREP Styles, and set it to apply the Character Style to the 'Any Digit' Wildcard.

My computer's default language is spanish. Is there any way i can change safari's language to english?

My computer's default language is spanish. Is there any way i can change safari's language to english?

Change your OS X language
Your Mac is set to display the language for the country in which you bought the computer. For example, if you bought your Mac in the United States, your Mac is set to English. If you bought your Mac in France, your Mac is set to French. But if you prefer to use a different language, you can.
If you bought your Mac in the U.S. but English isn't your preferred language,
you can switch the language via drag-and-drop.
Open System Preferences and click Language & Text.
Click the Language tab.
In the Languages pane, drag your preferred language to the top of the list.
To apply the language throughout your system, restart your Mac or log out and log back in.

Is there a way to automate genre assigning

Typically when I insert a CD for import I have to select all the tracks and then assign a genre. Usually the track info iTunes grabs from CDDB are good, but the genre is off. Doing this for hundreds of CDs is a bit of a pain... I know Control-A will select all the tracks, but then from there I don't know a shortcut to Get Info and change genre. Ideally I could automate all of this and not even have to go through shortcuts. It would be great to stick a CD in and then run a 'macro' that grabs all the tracks and changes them to a given genre like Alternative.
Any ideas on what my best options are? If not a macro... what about shortcut keyins at least?
Thanks.
-Mark
ps - i know media monkey allows for this sort of macro... why not itunes?

OK, working on my own answer here....
Control-A (selects all)
Control-I (get info dialog)
Alt-G (genre field)
Then type enough letters in the genre's spelling to get it to select.
Easy enough. But is there a way to automate it to a click?

Is there a way to automatically change tabs with different times set for each tab?

Similar Messages

Maybe you are looking for