Is there a way to automatically save my keywords to the metadata?

I'm coming from Lightroom, and it does it all automatically.

What do you mean with "save keywords to metadata"?
In Aperture  - most of the time - saving any edits is not necessary. Conceptually Aperture is more like a database or an asset management system than like a document editor. Any changes to metadata tags like keywords are stored immediately. While working with Aperture you are changing images (items in Aperture), not image files. You change a keyword or any other part of the metadata and that change applies to the version of the image you are editing.
When you export an image all your edits are computed to create an image file and you can choose to have the IPICT-Metadata added to the exported image file.
For changes to the IPICT tags (and keywords are part of the IPICT content) you can decide to write them directly to the master image file, either with import presets, when batch changing mutiple images, or with the menu entry
      Metadata -> Write IPICT Metadata to Master
But usually you are not supposed to access the master files using the Finder, it is safer to export them from Aperture, if you need them outside Aperture, and then you can add the IPICT tags on export by setting the flag.
Regards
Léonie

Similar Messages

  • Is there a way to automatically add text to video; the text gleaned from order data?

    is there a way to automatically add text to video; the text gleaned from order data?

    What is "order data"?

  • Is there a way to automatically save e-mail addresses to address book?

    I know when composing an e-mail, command-Y will result in saving the address on the outgoing mail to the address book. Is there a way to set up mail so that ANY outgoing mail I send results in saving the e-mail to my address book - automatically, without the extra step of command-Y?

    In that case, you may also find the following collection of AppleScripts useful:
    http://homepage.mac.com/aamann/Mail_Scripts.html

  • Is there a way to automatically save an audio I message with iPhone 6?

    I sent an audio iMessage to someone that I think blocked my number.  It's saying that so and so kept the audio message.  That's confusing sunce it does seem like they have blocked me from calling.  is this persn really getting my audio messages? Or are they just automatically being saved in cyber nowhere? I have the iPhone 5s with the iOS 8.1.2 operating system. they have the newest 6. 

    If you block someone, you block all methods to reach you via phone (e-mail is a different thing altogether). I know that numbers I have blocked will not ring my phone nor alert me to a new voice mail message, but the message ends up in a "blocked messages" queue. I do not receive further iMessages or text messages from those I have blocked, but I do not know if that is because they never tried again or if blocking stops the messages from getting through.
    If they have blocked you, you might want to take that as a sign.

  • Is there a way to automatically clean unused images from the DAM?

    I'm trying to find a way to clean up the /content/dam folder from unused images and other assets.
    Is there an automated tool for this? Search and remove type of SQL or XPath query?
    How would I go about doing this?
    (Manual removal is not an option. We have hundreds of images)
    Thanks a lot in advance guys,
    David

    You are welcome. You can also find some script here [1] that does delete operation on DAM. You have to extend this script to check for references. Best way to do that would be to write a servlet that will return number of references based on DAM path and if result is zero then delete that node.
    Or use CQ OOTB servlet (Use Curl command to check response)
    http://localhost:4502/bin/wcm/references.json?path=<YOUR DAM ASSET PATH>
    if this return empty then there is no reference.
    [1] http://www.wemblog.com/2012/09/how-to-put-dam-asset-back-to-workflow.html
    Yogesh
    www.wemblog.com

  • HT201317 Is there a way to permanently save my photos to the iCloud?  .

    I thought they were being saved but just found out they are being deleted after 30 days. The whole reason I was using iCloud was for photo storage.

    You can by adding them to a shared stream and inviting yourself as a subscriber (see http://help.apple.com/icloud/#/mmc0cd7e99). Shared streams are not deleted after 30 days.  But if you accidentally delete the shared stream, you'll lose your photos.
    The smartest thing to do is to import them to your computer as explained here: http://support.apple.com/kb/HT4083.

  • Is there a way to automatically backup the Airport Extreme Configuration file (.baseconfig)?

    Is there a way to automatically backup the Airport Extreme Configuration file (.baseconfig).
    I know (in hindsight) that I can manually export it from the Airport Utility, but ideally I would like to include it in my Time Machine backup. I had a situation where my Airport Extreme (3rd generation) just stopped working (no lights, no power). I had not exported the config file. I bought a new Airport Extreme (5th generation) and had to manually configure the new router.
    Thanks

    One option would be to use Automator and record the actions to run the AirPort Utility; save the configuration file to the desktop (or any other location you want), and then, close the utility. You can then either make this a part of your login startup programs. Time Machine then should be able to make backups.

  • Is there a way to automatically set the file name in Acrobat Properties when exporting a PDF from Indesign?

    When I used Quark to make a PDF, the title area in the PDF was automatically populated with the file name, there in the properties tab. We like use this area to confirm file names of original files, so we can keep track of drafts, (in case the file name of the PDF is changed, which our boss often does). Is there any way to set up InDesign to do the same?

    @stadlock – I think I know what you mean…
    You exported to PDF and changed the file name in the export dialog to a different one from the document name presented there the first time you exported that document. And in exports after that the new name will be presented in the dialog instead of the name of the document.
    What you can do against that?
    1. First time you want to export: Save before the document is exported. And do not save after it's exported with a new file name.
    2. After the new file name is already there in the export dialog:
    Type in the document name in the dialog. Export. Or abort after chosing a export preference. Save. Check again, if the document's file name is in the export dialog. If yes, procede like in suggestion #1. If not do a full export with the document's file name, save and then procede with suggestion #1.
    Uwe

  • I have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd

    i have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd

    steve359 wrote:
    Sorry ... I read but was unfortunately distracted from your original post.  You have a system that came with Lion.  The Lion that is on your system is only for your computer and cannot be downloaded from the app store again because you never purchased it officially through the App Store.
    Try this for making an external USB/DVD copy of Recovery on an external disk.  internet is still required for reinstall, though, I believe: http://support.apple.com/kb/HT4848.  But at least you have a separate Recovery Partition if you ever need a fully new and empty internal disk.
    Your assumption is incorrect. Although he may not be able to download it from the App store he can download it directly for the Apple servers using the recovery partition on his original drive.
    All you have to do is start the install routine and then point the install to an external hard drive. Once the download is finished the computer will reboot to start the install. At that reboot disconnect the external drive so the install can not start. Boot the computer back into the OS on the internal hard drive, which is what will happen automatically once the external drive is disconnected. Then connect the external and copy the files from it that were downloaded. Right click on that downloaded package file and select Show contents. In the contents of that package is a file called InstallESD.DMG. Copy that file out of the package and burn it down to a DVD or USB thumb drive and you now have the Full Lion Installer. I have several of them laying around on different hard drives and 2 USB thumb drives which I have used to reinstall Lion on my 15" MBP.
    Sorry OP I should of just typed this out in my first post.

  • Is there a way to automatically add another of the same page while a form is being filled?

    Is there a way to automatically add another of the same page while a form is being filled?
    I have a two-page form of which the second page is essentially a spreadsheet analog.  Often, there is need for for more lines than are available on the page.  Is there a way in which to add another or even multiple copies of the second page? 
    Thanks ahead...
    TG

    You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

  • How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive w

    How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
    The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.

    If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
    You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
    Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
    There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
    You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
    See:
    http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See http://kb.mozillazine.org/Profile_folder_-_Firefox
    "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
    See http://kb.mozillazine.org/Show_hidden_files_and_folders
    Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
    You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files.

  • Is there a way to automatically insert the filename in the footer of a spreadsheet using iWork's numbers 3.2?

    Is there a way to automatically insert the filename of a spreadsheet into the footer when using iworks numbers 3.2?  iworks 09 had this feature and I can't find this feature in the new version of numbers.

    Hi rhyolite,
    In Numbers 3.x, The Print View and Layout View have gone (for now at least). Page Headers and Footers can only be reached under Menu > File > Print... to open Print Preview. Hover the cursor to reveal the Page Header and Footer fields.
    The only inserts that I can get to work in Print Preview are Page Number, Page Count and Date & Time. Filename is no longer in the Insert menu.
    Regards,
    Ian.

  • Is there a way to disable 'Save as' and 'Send Email' function in Acrobat XI?

    Hi,
    Is there a way to disable 'Save as' and 'Send Email' function in Acrobat XI?
    Thnx in advance.

    I would hope there would be no way to disable Save AS that would reduce the applicationss capability. What are you trying to prevent happening?

  • Is there a way to Automate or Script the Mail Merge Feature in iWorks?

    Hello,
    I've been trying to build a production management system slowly over the last few months, my boss is a bit of a technophobe so I've been trying as hard as i can to keep everything in familiar programs, at its core all the system has to do its take information in from Purchase Orders, this is added to a Numbers File, within that numbers file are our Open Order Book showing All orders and 2 "Merge Sheets" all new Orders are Added to the Merge Sheets then onto the Open Order Sheet, those "merge sheets" are then used as a data source for a Pages file "Job Card" (we have 2 job card files once blue one yellow but the process is the same)
    Up until now I've been manually merging each time we get a new order, but this happens a lot so what I've been trying to do is Automate the procedure.
    Ive created 2 Automator Apps  each runs the same sequence just for the two different Job cards as follows:
    Get finder Item "Job_Card_Blue/Yellow" > Open Finder Item > a "watch me do" of mail merge > Print > Close Application without saving
    The Problem is the Watch me do is a bit of a clunky work around, if I could make it work without the mouse moving over the screen it wouldn't be so bad, even if I could somehow give Mail Merge a Keyboard Short Cut it would also be better.
    So my questions, after a large ammount of waffling:
    1) is there a way i can "see" and then edit the "watch me do" Script?
    2) is there a simpler work around im not seeing?
    3) is there an existing script of program I can use? (obviously i know there is Filemaker etc, if it was up to me I'd use a Database, but the owner of company is adimant i use office or easy programs, becuase it needs to be a system i can leave to him once my contract is up)
    Any Help or suggestions would be greatly appreciated!

    Yes I've created an Automator Application that does the job, but the "watch me do" function that does the Mail Merge is a rather Clunkey work around, as the mouse moves all over the place, thats the part i want to remove and replace with a script, or work out a different way around it that avoids the "watch me do" function.
    Is this Possible? or where/who is there i can ask to write me a script, im not a novice to scripting, but i am a novice to Applescript.

  • Is there a way to automate the CFX tags installation?

    Hello,
    I'm currently in the process of re-installing a web farm of ColdFusion 8 servers (W2K8, IIS 7.5).
    I have to install a number of CFX tags (C++) on each server to get the code running.
    Is there a way to automate the installation of the CFX tags (regedit imports, VBS, PowerShell...)?
    I found some link indicating that keys should be imported in the registry at: HKLM\Software\Allaire, but Allaire does not even exist in this branch (I believe that the instructions were true of older versions of CF).
    I installed one of the tags manually and noticed that the file neo-runtime.xml was updated with:
    <?xml version="1.0"?>
    <wddxPacket version="1.0">
      <header/>
      <data>
        <array length="18">
          <boolean value="true"/>
          <struct type="coldfusion.server.ConfigMap">
            <var name="session_variables">
              <boolean value="false"/>
            </var>
            <var name="application_variables">
              <boolean value="false"/>
            </var>
            <var name="server_variables">
              <boolean value="false"/>
            </var>
          </struct>
          <struct type="coldfusion.server.ConfigMap">
            <var name="cfx_http5">
              <struct type="coldfusion.server.ConfigMap">
                <var name="NAME">
                  <string>cfx_http5</string>
                </var>
                <var name="CACHE">
                  <string>true</string>
                </var>
                <var name="PROCEDURE">
                  <string>ProcessTagRequest</string>
                </var>
                <var name="DESCRIPTION">
                  <string/>
                </var>
                <var name="TYPE">
                  <string>cpp</string>
                </var>
                <var name="LIBRARY">
                  <string>D:\ColdFusion8\cfx\cfx_http5\cfxhttp5.dll</string>
                </var>
              </struct>
            </var>
          </struct>
    Can I simply add the XML node to get it running?
    Thanks in advance for any lead to the solution.

    This is great! but I'm not there yet. I figured how to assign little midi triggered melodies to a touch track. I used to do stuff like this on an old Buchla years ago. How do I get the automation on the midi track to control the filter on an audio track? I created regions with the automation I want on a midi track, then I assigned those regions to keys with touch tracks. How do I get that to control the filter on the audio track?
    thanks,
    Lee

Maybe you are looking for