Is there a way to blacklist a number?

I can't seem to find a way to do it on my C3: is there a way to block specific numbers from calling mine?
If the C3 doesn't provide this particular option, is there a JAVA app available for the S40 operating system to achieve this?
Thanks!
PS I remember one of my old Nokia phones had this option, but I'm not 100% sure.

thats possible you can create your own silent tone or look here for one
http://www.zedge.net/
remember contacts must be stored on the phones memo to asign tones
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Is there a way to "blacklist" a stolen Mac?

Is there a way to "blacklist" a stolen Mac?

Yes there is and go into a Apple Store or phone them up and give them the serial number and anywhere its registered or handed in for repair etc it will be flagged up.

Is there a way to control the number of concurrent SMTP connections on Database Mail?

Las week Rackspace started controlling the number of concurrent SMTP connections and we are now getting the following message when we send as little as 15 messages at a time using Database Mail:
Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response was: 4.7.0 smtp13.relay.dfw1a.emailsrvr.com Error: too many connections from IP xxx.xxx.xxx.xxx)
We are using SQL Server 2005 and Windows 2003 and we have been doing this since 2006 with no problems
Is there a way to control the number of concurrent SMTP connections used by Database Mail or the Database Mail external executable DatabaseMail90.exe?

Hi rkohler,
Usually, we can use the Database Mail Configuration Wizard or the Database Mail stored procedures to determine the server name and port number for the Simple Mail Transfer Protocol (SMTP) server . In the SMTP server points, we can set or increase the number
of concurrent connections.
There is similar issue about database email on SQL Server 2005, you can refer to the following post.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6bb7b600-f025-451b-898b-2caa29c10d4d/only-some-email-gets-sent-successfully-from-spsenddbmail-database-mail-on-sql-server-2005
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Is there a way to make a number of cells add to a certain number. I need 5 or 6 cells to add to 1700. If one of the cells becomes 0, I need the other cells to change so the bottom number stays at 1700.

is there a way to make a number of cells add to a certain number. I need 5 or 6 cells to add to 1700. If one of the cells becomes 0, I need the other cells to change so the bottom number stays at 1700.

Okay then. If your seven numbers are in column B then the formula next to each number in column C would be
=IF(B=0,0,1700/COUNTIF(B,">0"))
This assumes all non-zero numbers are positive numbers. The sum will be 1700.

Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

You should ask in InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Are there any ways to get sequence number other than getting it for each re

are there any ways to get sequence number other than getting it for each record

CACHE is the number of values Oracle stores in memory. So the first call to NEXTVAL Oracle grabs x numbers; subsequent calls to NEXTVAL are served from memory until they're all gone and them another bunch is grabbed. The attached sql*plus output demonstrates this behaviour.
Note that normally unused numbers in the cache are returned to the data dictionary but in exceptional circumstances (DB crash) they may be lost.
Cheers, APC
SQL> create sequence seq cache 3
2 /
Sequence created.
SQL> select last_number from user_sequences
2 where sequence_name = 'SEQ'
3 /
LAST_NUMBER
          1
SQL> select seq.nextval from dual
2 /
   NEXTVAL
         1
SQL> select last_number from user_sequences
2 where sequence_name = 'SEQ'
3 /
LAST_NUMBER
          4
SQL> select seq.nextval from dual
2 /
   NEXTVAL
         2
SQL> select last_number from user_sequences
2 where sequence_name = 'SEQ'
3 /
LAST_NUMBER
          4
SQL> select seq.nextval from dual
2 /
   NEXTVAL
         3
SQL> select last_number from user_sequences
2 where sequence_name = 'SEQ'
3 /
LAST_NUMBER
          4
SQL> select seq.nextval from dual
2 /
   NEXTVAL
         4
SQL> select last_number from user_sequences
2 where sequence_name = 'SEQ'
3 /
LAST_NUMBER
          7
SQL>

Is there a way to increase the number of layers in PS touch for iPad? Can Adobe do something about this?

Is there a way to increase the number of layers in PS touch for iPad? Can Adobe do something about this? I have been using PS touch for iPad for a few years and ALWAYS end up with a message that I have reached the maximum allowable number of layers. not to mention of course a simple tool for drawing straight lines which is a must. I may be missing something. I would have imagined that a respectable company like Adobe would have added over the years a small upgrade to solve these issues.
thanks.

Hi Patrick,
I'm working on a 30" monitor, so it's effectively 2560x1600. It only seems to be showing 2 tracks at a time, unless there is a preference or setting I'm missing that I can't seem to find in the documentation. Here is a screenshot:
I don't see any areas for expanding the timeline. I can scroll vertically in the timeline, but I can't seem to actually get a larger static vertical area for showing more tracks at once. The only vertical resizing widget is to expand the bottom or top panels, not the timeline.
Thanks,
Jason

Is there a way to find the number of downloads of music from itunes store?

Hi,
Is there any way to find the number of downloads of each music file available on itunes store. If not exact no of downloads but atleast a relative term to find the rank of the music track From any API
Thanks
Sandeep

A: Is there a way to read the number of active sequence executions from the Engine?

Scott,
> One way of handling the issue of init once a set of instruments is to
> create a new sequence file that has a sequence to init and a sequence
> to close the instruments. Assuming that you always terminate a
> sequence and do not abort them, you could add a ProcessSetup and
> ProcessCleanup callback sequences to the client sequence file that
> using these instruments. These callbacks are automatically called by
> the process model in both the Single Pass and Test UUTs execution
> entry points. The callback sequences could call the init and close
> sequences for the hardware. In the hardware sequence file you could
> reference count the number of execution that init and close by setting
> the file globals in the sequence file to be shared across executions
> and then add a numeric value that keeps track of references for the
> instruments. The init sequence adds to the count, and the close
> sequence subtracts from the count. The init sequence inits the HW if
> the count is 0->1 and the close sequence closes the HW if the count is
> 1->0.
>
> This is one of many ways in TestStand that this could be done, not to
> mention that this could also be done in a similar way in a LabVIEW VI
> or DLL directly.
That sounds like it will work. I'll try adding a client count
increment/decrement in the DLL initialize and terminate functions. This
should essentially perform the same tasks as the callback scheme you mention
above, no?
The reason I didn't think the 'client counting' scheme would work initially
was I mistakenly thought that the termination function would not get called
under Terminate conditions. Since Terminate conditions happen a LOT during
our initial debug of new UUT types, I didn't think that would be acceptable.
I forgot that lacing the terminate funciton in a cleanup step group, I can
force it to be called in Terminate conditions.
> If you abort an execution then the reference counting idea above would
> fail to decrement properly. That might b... [Show more]
Read other 5 answers

Someone had my apple id password and bought a game from the App Store. I've changed my password but is there any way to find he number it was downloaded to?

Someone had my apple id password and bought a game from the App Store. I've changed my password but is there any way to find he number it was downloaded to?

Contact iTunes support

Is there any way to limit the number of Threads running in Application(JVM)

Hello all,
is there any way to limit the number of Threads running in Application(JVM)?
how to ensure that only 100 Threads are running in an Application?
Thanks
Mohamed Javeed

You should definitely use a thread pool for this. You can specify maximum number of threads that can be run. Be note that the thread pool will only limit the number of threads that are submitted to it. So donot call "Thread"s start() method to start thread on your own. Submit it to the pool. To know more, study about executor service and thread pool creation. Actually it will not be more than 20 line code for a class and you might need maximum of 2 such classes, one for threadPool and other one for rejection handler (if you want).
Just choose the queue used carefully, you just have to pass it as a parameter to the pool.
You should use "Bounded" queue for limiting threads, but also be careful in using queues like SynchronizedQueue as the queue will execute immediately the threads submitted to it if maximum number of threads have not been running. Otherwise it will reject it and you should use rejection handler. So if your pool has a synchronized queue of size 100, if you submit 101th thread, it will be rejected and is not executed.
If you want some kind of waiting mechanism, use something like LinkedBlockingQueue. What this will do is even if you want 100 threads, you can specify the queue's size to be 1000, so that you can submit 1000 threads, only 100 will run at a time and the remaining will wait in the queue. They will be executed when each thread already executing will complete. Rejection occurs only when the queue oveflows.

My iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??

my iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??

If you had find my iphone activated on the iphone itself before it was stolen, then you may be able to track it.
Otherwise, there is nothing you can do.
Sorry.
Report it to the police and your wireless carrier and change your password.

Is there a way to display the number of pictures or photos in a smart album

when I look at my project view on the left, all of the projects or folders show the number of photos that are in them at a glance. However, on my smart albums, it just shows the looking glass which you can click on to edit the properties. Is there any way for aperture to show the number of photos in a smart album without having to open the smart album and count? Thanks!

No. But when you click on them, the number of images they contain will be at the bottom of the Browser screen and in Split View just above the bar separating the Viewer from the thumbnails.

Is there a way to control the number of consumed messages from JMS?

Hi everyone,
I have a BPEL process that is consumes messages from a foreign queue, performs a transformation, and passes it to Oracle Apps. I'm curious if there is a way to control the number of messages consumed at a time for processing.
For example, if we place 50 transactions on this queue, I would like to only consume 10. And then as each one is processed and passed to Oracle Apps, I would like to pull another transaction off the queue. So basically I would only be processing 10 at the most.
The issue I am having is we put 50 on the queue and the 50 are take off right away. But then half are making it into Oracle Apps and the remainder is failing with a JCA Connection Factory max connection error.
Instead of changing the settings to get more through, I am wondering if it's possible to limit the number being processes at any one time.
Thanks

Hi,
Have a look at the adapter.jms.receive.threads Property for JMS Adapter...
http://docs.oracle.com/cd/E21764_01/core.1111/e10108/adapters.htm#BABCGCEC
Cheers,
Vlad

Is there any way to generate random number in CPO

Requirement : -
> I want to generate a random number from set of 1-9 numbers .is there any way in cpo ?
Thanks
Siva

I created a process that uses 3 steps, all of which happen inside the engine rather than having to span out to a script, so it runs a lot faster.
Technically, it's pseudo-random...
Predefine Output Variable "Random Number" as type "Numeric"
Step 1: Format Date
Format string: fffffff
(that's seven lower-case letters "f")
Original date: [Process.Start Time]
Step 2: Format Date
Format string: ff\0\0\0\0\0
Original date: [Process Start Time]
Step 3: Set Variable
Variable to update: [Process.Variables.Output.Random Number]
New value: ([Workflow.Format Date.Formatted Date]-[Workflow.Format Date (2).Formatted Date])/100000
This returns a basically random number between 0 and 1 (so you can mulitply it by your maximum value) based on the numeric fraction of a second of the start time of the process.

Is there any way to limit the number of times that a PDF can be opened?

I run a small publishing company and we want to provide exam copies of our books to professors. At present our exam copies have the words EXAM COPY as a water mark on every page and we've also made the files so that they can't be printed or easily copied. However, we'd like to also restrict these PDFs so that they can only be opened 5 times. I've read about FileOpen but that approach seems a bit more complex than needed. Is there any other way to restrict the number of times that a PDF file can be opened once it is downloaded? Thanks in advance for any suggestions.

DRM soltions like FileOpen are your best bet for PDFs. Others include Adobe's LiveCycle Rights Managment, LockLizard, Armjisoft PDF Security OwnerGuard, etc.
They all work and are priced differently, but there's really nothing for what you want to do that is both simpler and secure.

Is there a way to blacklist a number?

Similar Messages

Maybe you are looking for