Is there a way to boost Safari? Snow Leopard 10.6.8, Safari 5.1.7 is very slow, almost dead. Thank you.

Is there a way to boost Safari? I'm using Snow Leopard 10.6.8, Safari 5.1.7 which has become very slow, almost dead. Many thanks!

If Safari is getting very slow:
(Presumably you regularly empty your Safari cache by deleting the following file:
Home/Library/Caches/com.apple.Safari/cache.db
and clear your History)
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network:please refer to this page: http://www.opendns.com/start/best_practices/#your_network and follow the advice given.
If you use a Router, make sure it has the latest firmware installed.
One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x as is described here:
http://support.apple.com/kb/TS3408?viewlocale=en_US
You can cancel DNS pre-fetching by going to Terminal and typing:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
You have to restart Safari for it to take effect.
If Safari seems to hang for ages:
If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
Open the Terminal from the Utilities folder in /Applications and type
killall -9 WebKitPluginHost
Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The later versions of Flash 10.1 onwards appear to have improved the situation somewhat, but haven't completed eliminated it.
For this and other reasons Apple switched their websites to HTML5 in January 2011:
http://www.appleinsider.com/articles/11/01/26/apple_revamps_its_public_website_u sing_html5.html
For Snow Leopard/Lion users this should also be read:
http://support.apple.com/kb/TS3408

Similar Messages

  • I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

    I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

    BrettGoudy wrote:
    ...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
    As the last post suggests, call Apple and order a replacement original disc for about $17.  They will ask you the model and serial numbers.
    Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
    Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

  • Is there any way to make a snow leopard partition on an early 2011 MacBook Pro that was upgraded to Lion, without the original boot disk?

    So I have an early 2011 MacBook pro,  I believe it shipped with snow leopard originally, as I purchased and upgraded to Lion fairly early on.  I am trying to make a partition right now and have it run snow leopard so I can use programs that have PowerPC.
    I should note, I replaced both the RAM and the harddrive in my Macbook pro.  I changed from 4 GB of ram (that came shipped) to 8 GB of ram from a 3rd party, that I installed on my own months ago, have registered in the computer and have been working fine for quite some time now.
    Also I should note I replaced my harddrive.  I went from what ever the standard 500 GB harddrive that shipped with 15 inch early 2011 MB pro's.  I now have a 3rd party SSD that's 240GB's that I also installed on my own, (at the same time as the RAM---Black friday items)  The harddrive has been working just fine since then.
    In installing the harddrive I borrowed a friends external harddrive and used a program called carbon copy cloner to get everything over to the SSD.
    Now here is my issue.  I have ordered the Snow Leopard (10.6.3) install disks from apple, I have created a partition on my SSD for snow leopard, but when I try to select the install disc for snow leopard at boot I get three beeps.
    I know this issue has been posted elsewere but it said answered and the answer is no longer available.  I also am unsure if any of the RAM or Harddrive swapping could have been causing the issue.  I have the old harddrive and RAM still, but unfortunatley have no external harddrive anymore or money to afford one.
    Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks).
    Let me know If there is anything I can do.  I'm a now broke college student so i'd like to spend as little $$$$ as possible
    *PS I should also note the DVD drive is working fine, it reads the disk, the disk is brand new, it plays DVD's fine and has never had any issues in the years i've used it for similar tasks*
    sorry for the long drawn out post, I just wanted to include as much as possible from what I've seen other people have issues with

    BrettGoudy wrote:
    ...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
    As the last post suggests, call Apple and order a replacement original disc for about $17.  They will ask you the model and serial numbers.
    Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
    Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

  • Hi, I got a new iPhone that I havent uploaded to my iTunes yet I had pictures and contacts. I accidentally said to restore it as my old iTouch. Is there a way I can change it back to my old iPhone and get my pictures and contacts back? Thank you

    Hi, I got a new iPhone that I havent uploaded to my iTunes yet I had pictures and contacts. I accidentally said to restore it as my old iTouch. Is there a way I can change it back to my old iPhone and get my pictures and contacts back?

    You would need to check if you made a back up of the iPhone on iTunes/iCloud before you restored from the ipod touch back up. If there isnt then im sorry that data is gone.

  • I'm fed up with Mountain Lion. Is there a way to return to Snow Leopard?

    Every thing was fine until the "upgrade". Now I can not print, stream music via Airport, or use any other device on the wirless net. Computer can't find them. Plus I'm com[pletely conused over ICloud and would like to eliminate it completely.

    Once you get straightened out consider backing up via a bootable clone. It can solve a lot of problems.
    http://www.cultofmac.com/48861/how-and-why-to-clone-your-mac-hard-drive-macrx/
    http://www.maclife.com/article/howtos/how_make_bootable_clone_your_mac
    http://macs.about.com/gi/pages/poll.htm?poll_id=9868399270&linkback=http://macs. about.com/b/2012/02/22/readers-choice-awards-2012-voting-best-mac-backup-applica tion.htm&rc=1

  • Is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.

    is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.

    Have you seen this article yet?
    iPod won't turn on
    B-rock

  • Have updated from Snow Leopard to Lion with Safari Version 5.0.5. Now I can not update to Safari 5.1. There is no update in the Software Updater, and on the apple-download page, I only found a Safari 5.1 for Snow Leopard. When executing it, there is an e

    I have updated from Snow Leopard to Lion with Safari Version 5.0.5. Now I can not update to Safari 5.1. There is no update in the Software Updater, and on the apple-download page, I only found a Safari 5.1 for Snow Leopard. When executing it, there is an error message, that it is for 10.6 only.
    It seems that I should have first updated Safari, and then only to Lion, which I didn't. Any idea how I can fix this now without having to rollback to Snow Leopard, update Safari and then go back to Lion?

    Try this Safari5.1 from the installer package
    http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
    The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link,  it took about 4 minutes to download on my test.

  • Is there a way to add a google search tab to the safari window interface in ios7?, is there a way to add a google search tab to the safari window interface in ios7?

    Is there a way to add a google search tab to the safari window interface in i0s7?

    You can't add icons to Safari on iOS devices. You can set google as your default search engine for Safari via Settings > Safari > Search Engine - the URL field acts as both URL and search on iOS 7

  • Is there a way to sync bookmarks in Firefox with bookmarks in Safari?

    Is there a way to sync bookmarks in Firefox with bookmarks in Safari?

    There's always a catch
    Check the two sites I mentioned - you should be able to specify the 'freeware' category when performing/narrowing down your search.

  • I am hard of hearing, is there some way of boosting the volume especially when using a headset

    I am hard of hearing...is there some way of boosting the volume when wearing a headset?

    Get an amplified headset.

  • Is there a way to boost the volume on an IPhone 3G

    Is there a way to boost the volume on my IPhone 3GS?

    I'm guessing you mean a way, other than pressing the volume UP button on the headphones cable...   Also, are you saying that the maximum volume (using the volume button) is not loud enough?  If so...
    I don't have the 3G iPod shuffle, but there is probably a Limit Maximum Volume setting, and it may currently be set lower than you want.  With the iPod shuffle selected in the iTunes sidebar (under DEVICES), go to the Settings or Summary tab (over to the right).  See if there is control there for limiting the maximum volume on the shuffle.  If so, disable it or set it to the desired max loudness.  Apply the change.

  • Is there any way to boost a signal.

    The television signal to each unit gets lost every hour for about 5 minutes, and the tech can't come back for 5 days according to the 800-Comcast. Is there any way to boost the signal in the mean time? 

    PamBarksdale wrote:
    The television signal to each unit gets lost every hour for about 5 minutes, and the tech can't come back for 5 days according to the 800-Comcast. Is there any way to boost the signal in the mean time? Yes, but if you select the wrong equipment, you could be adding to your issues or your neighbors....   it is best to let the onsite Tech make the determination of what equpment you need and he/she has available to install.

  • I seem to have very poor wifi signal strength,is there any way to boost my signal

    I seem to have very poor wifi signal strength,is there any way to boost my signal

    If you gave some information on what network equipment you are using (make, model, version) and where you are experiencing signal problems it would help in giving advice.

  • Is there any way to boost max volume??

    is there any way to boost the maximum volume for the macbook?? i have everything all the way up but im just curious if there are any progs that will make it louder??

    You can increase iTunes volume by choosing Show Equalizer, select the Preamp checkbox, and move the slider up.

  • Running snow leopard 10.6.8,safari 5.1.10-yahoo mail keeps asking me to update my browser but there's no link. Does it think I'm running Mavericks or what;s going on. Have carried out updates

    Running Snow Leopard 10.6.7 & Safari 5.1.10
    Problem is with Yahoo mail which keeps asking me to update my Safari browser but everything is up to date as far as I can tell. Have reset Safari & empties cache.
    But no change- every time I go to open Yahoo mail it goes to a page with update boxes for Firefox & Safari asking me to upgrade but on hitting Safari upgrade box it just takes me to an Apple page that explains the benefits of the new Safari ( Mavericks maybe ) with no option to upgrade. Can anyone suggest an answer to this annoyance.
    Thanks very much,
    Dino.

    Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

Maybe you are looking for

  • Sun One Application Server 7 SSL Reverse Proxy Setup?

    Hi, I've made a similiar post on the Web Server forum, http://forum.sun.com/jive/thread.jspa?threadID=95666&tstart=0 I've noticed there's a reverse proxy plug in setup for Web Server, as well as a AddOn package for Application Server. I've so far suc

  • Interactive Report Column Heading Filters using LIKE instead of =

    Still on APEX 3.1 I have an inter active report with a column Like Below select case when trunc(c.resp_contact_dt, 'MM') = trunc(sysdate, 'MM') or trunc(c.oth_contact_dt, 'MM') = trunc(sysdate, 'MM') then '<img src="/i/contact_2_green.png" alt="RESP

  • ASA 5510 Not able to route traffic between 2 LAN interfaces

    Hi everybody, I need help to enable traffic between two physical ports on my Cisco ASA 5510. I created access rules and NAT but traffic doe not go from accounting interface to Inside. I am able to access internet from both interfaces. Can someone pin

  • How do I save an edited clip back to my library?

    I've dragged a clip to the timeline, I've edited it by rotating the clip and expanding it's size. I now want to save that edit that I've just done on the clip BACK to my library window. How do I do this? I've tried right-clicking and selecting "Make

  • Unknown user name or bad password issue while creating AD accounts

    Hi All, While creating accounts on AD through IdM, I am getting below error. Sometimes I don't see this error while sometimes I do. What could be the actual reason ? com.waveset.util.WavesetException: Error opening object 'LDAP://cn=ut9778ug,ou=Emplo