Is there a way to bring back link information at the bottom-left when highlighting a weblink or email address in FF29?

I used to use the Addon Bar in previous versions of Firefox...not sure why it was removed as a lot of people use it, but I now have the extension that brings it back. However....in previous versions of Firefox, at the bottom-left, there was a place where a link or e-mail address would be displayed if I hovered over it with the mouse cursor without clicking...that function seems to be gone now...? Is there a way to bring this function back in FF29? Also, why were separators removed....it seems like a pointlessly trivial feature to eliminate...I miss them for organizing my UI! :(
Thanks for any help or suggestions! :)

The feature that shows the link you are mousing over hasn't been removed in 29. Maybe the add-on you are using to restore the add-on bar is covering it. I've tested the Classic Theme Restorer and it seems to work correctly in this situation - https://addons.mozilla.org/firefox/addon/classicthemerestorer/

Similar Messages

Is there a way to bring back the "Open a New Tab" option via right-clicking on the Tab?

I just upgraded to latest version of Firefox (6.0). Yesterday it informed me that an upgrade to Firefox 5.(something) was available and asked if I wanted to upgrade. I went for it. However, I hadn't used it since then till today. Now when I opened it today it asked me if I wanted to upgrade to version 6.0. Without hesitation, I went for it too.
While this version looks nice, it feels a bit odd to use it. Previously whenever I wanted to open a new Tab, I right-clicked on any of the Tabs (active tab or any other Tab) and after right-clicking, it had the option to '''''Open a New Tab''''' along with few other options. Now there's no such option. There's the + button to open a new tab, but what if I want to open a link in a new tab by right-clicking on it? Similarly the option to Open in New Window is also missing.
Is there a way to bring back those previous Tab options/settings? If yes, how?
P.S. In my bookmark toolbar, when I click on a bookmark icon, it has the same options/settings as it previously had in the last version I used (last version I used was 3.something; while I'd upgraded to version 5.something I hadn't used it except for opening the browser when it asked me to upgrade to version 6.0). Options on right clicking the bookmark icon are:
Open
Open in a New Tab
Open in a New Window
New Bookmark...
New Folder...
New Separator
Cut
Copy
Paste
Delete
Properties
I'd also like to mention here that I know of the shortcut keys; so please don't waste your time by trying to help me that way. Thanks.

No. The Tab bar is a regular toolbar in current Firefox versions, so you get the normal right-click context menu of a toolbar if you right-click the tab bar.
You can double click on empty space on the tab bar to open a new tab if you do not want to use the new tab button.<br />
You can drag a link on that new tab button to open that link in a new tab.<br />
You can also drag the new tab button on another toolbar if you would like that better.<br />
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"<br />

Is there any way to bring back the font type and background of Safari reader from iOS6 in to the iOS7 ? I really miss it, the new design is awful, simple and has now class at all.

Is there any way to bring back the font type and background of Safari Reader from iOS6 in to the iOS7 ? I really miss it, the new design is awful, simple and has now class at all.

I agree with you, many things in the ios 6.x were more elegant. The reader was the most one of them. I think the ios7 wants to be the windows 8.

Is there a way to create a link label on the export dialog

Hello,
Is there a way to create a link label on the export dialog?
For example : Click here for more info
I would like to have the "here" as a link label to open a html page
Thanks

Take a look at this post ("LrView: static_text like web links?"):
http://forums.adobe.com/thread/359789?tstart=60
The method described there works for me!
-Don

HT201269 If we set up a device as new, is there a way to go back and restore from the previous phone?

If we set up an iPhone 5 as a new device, is there a way to go back and restore from the previous iPhone 4?

See How to Restore from a Backup Here > http://support.apple.com/kb/ht1766

Is there a way to get back lost information on a phone that was synced to the wrong itunes account

is there a way to get back lost information on a phone that was synced to the wrong itunes account? My sister and I share a computer and she accidently did the itunes restore on her phone under my name so all of my contacts, apps, ect are on her phone and all of her info is gone. Is there a way to undo the reset? PLEASE HELP!!!

She can restore to a previous backup, if she has one. Or she
can restore via iCloud if she has that setup.

I sent iTunes to trash. I was able to recover the program but have to "put back" songs one at a time. Is there any way to put back from trash using the "select all" command?

I sent iTues to trash by mistake (trying to delete files from "yesterday"). I got the program back but have to "put back" songs one at a time. Is there a way to put back multiple songs using the "select all" command or anything else? Thanks for the help.

The prgram is in one location and the library (media + library files) are in another. Sending it all to the trash would take some pretty delibrate multiple actions and digging through multiple folders, so I don't know how this was managed unless there's something in Snow Leopard that's new. Occasionally I have moved a file to the trash in Finder that I didn't want to and I can use Finder's "undo" to undo the last move. With many files...?

Is there a way to move "back" and "forward" through the Library?

Is there a way to move "back" and "forward" through the Library?
For example, I'm editing Symbol_1, then I move to Symbol_22. Now to get back to Symbol_1 I need to find it again in the Library and double-click on it. Is there a shortcut for that?

No, but you can always use the library search option to widdle down the number of items displayed. It'd be a good feature request as I find myself hopping between specific movieclip depths on common clips often. Sort of like a clip/depth bookmark.

Is there a way to bring back the actual tab "bar"?

So in switching from FF3.6 to 5.0 I have noticed that the actual "bar" that holds the tabs is gone.
Observe:
[http://i.imgur.com/eU7lo.jpg http://i.imgur.com/eU7lo.jpg]
It's visually slightly annoying to not have a distinct separator between the tab area and the button toolbar, but that is something I can live with.
However I can NOT live with the extremely annoying functionality drawback that comes as a result of this. In 3.X and before you could right click anywhere in the tab bar and it would bring up the tab management menu. Now you can't bring up the menu from empty space because it treats that space as part of the rest of the UI and gives you a different menu, forcing you to mouse all the way over to a tab to accomplish the same end.
So my question is, does anyone know of a way, or an addon, that can bring back the actual tab bar? I find all of these UI changes to be nothing short of infuriating. I swear, Mozilla, Facebook, Pandora, Google, and Microsoft must all be in cahoots with each other because they're all introducing horrible UI designs at the same time.

Well I guess that's kind of cool that you can add buttons in the bar as well, but I honestly don't have a use for that and I think it would get in the way more often than not in most scenarios I can think of (there's a reason buttons were segregated from the tab bar and it wasn't tech limitations). The previous functionality is much more convienent and useful and, well, functional.
As for why FF5, well I've had the FF5 installation since before 6.0 was out, but the UI changes angered me so much that I abandoned it after about 20 minutes and went back to using my 3.6 installation; I've been letting the community stew and cook up solutions to the UI problems (status4evar for example) and like any good stew, giving it more time is better. Also a whole bunch of my addons (some of which are mission-critical to my browsing needs) were not [and a small few are still not] compatible with anything above 3.x, 4.x, or 5.x so I had to wait for those (mmm, stew). And then to top it off I figure the possibility that I'll run into upgrade problems is smaller if I go through the chain of updates rather than jumping from 3.6 straight to 7. And don't get me started on the whole rapid release schedule. :P

Is there a way to bring back old backups that no longer show on iTunes?

I recently upgraded to an iPhone 5, while restoring said phone from an old backup, it was having being a bit buggy. So I chose to backup my old iPhone 4 and it wiped it clean and backed up with only my audio files. I have lost all photos, apps, contacts, and messages.
When I tried to restore my new iPhone 5 from the previous back up, the back up did not show. the only back up that shows is the empty one.
Is there ANY way at all to find the previous back up and restore from that back up? My pictures and messages are very important to me and I just want to have them back. PLEASE give any suggestions as to how to get them back.
Thank you.

Itunes only saves one active backup. whenever you do a new backup the old one is overwritten

Is there a way to detect redraw regions or at the very least when a display object is redrawn?

I have a layered window system that produces Windows 7 Aero Glass effect in Flash.
It consists of nested display objects, with overlays as so.
Root [
    GlassWindowTop [
       RenderedEffectBackground
     BackgroundForGlassWindowTop [
         GlassWindowMiddle [
           RenderedEffectBackground
        BackgroundForGlassWindowMiddle [
             GlassWindowBottom [
                RenderedEffectBackground
             BackgroundForGlassWindowBottom (e.g. the DesktopBackground)
Windows can be raised and lowered by changing their order in the hierarchy and adding new levels.
Each glass window has a designated background (containing all lower windows) . It draws to an off-screen Bitmap the region of the background that is under the window, and applies a blur filter, tint, and parallax effects to it, and then displays that as it's own background as RenderedEffectBackground.
The problem is that "RenderedEffectBackground" is a static rendering of the window background, so in order to update it in real time, I need to detect when it's background display object (e.g. BackgroudnForGlassWindowTop) or any nested display objects are rendered.
I could simply update all RenderedEffectBackgrounds from the bottom up each frame, but that would be inefficient.   Ideally, I could detect when a particular background changes (e.g. when a textfield cursor is flashing, or a MovieClip changes frames), and then only render from that object up. The rendering of course always has to take place from back to front, starting with the lowest window that has changed. If I could detect the redraw regions of the Flash Player (e.g. when a textfield cursor is flashing, or a MovieClip is playing), I could optimize this system even further by checking for layer overlaps and only rendering layers whose windows intersect the redraw regions, but obtaining that level of information would probably not be possible or logical since this this essentially needs to happen during some kind of pre render phase, which Flash may not support. Such a pre-render phase would itself be causing new redraw regions, but as long as it is processed from the bottom up, it could work.
Is there any AS3 function of the flash player that allows my code to obtain information about the display list as far as which display objects are due to be rendered, and then intercept some kind of "onRenderComplete" event for them right before rendering takes place so that I can render the higher display objects.
I originally tried to implement this as a filter, but pixel bender shaders in AS3 don't seem to allow sampling of an underlying object that would allow for blurring (i.e. the shader can access only the current point being rendered, coordinates passed to the sampling methods are ignored (this is documented behavior).
Any ideas?

The feature that shows the link you are mousing over hasn't been removed in 29. Maybe the add-on you are using to restore the add-on bar is covering it. I've tested the Classic Theme Restorer and it seems to work correctly in this situation - https://addons.mozilla.org/firefox/addon/classicthemerestorer/

Is there a way to change to different colors on the bottom behind the apps?

I want to know if there is a way to change the background color behind the apps at the bottom of the screen and in the folder with multiple apps in it.

The color in both of these areas is a fogged version of the background wallpaper image behind the area. If you want something different choose a different wallpaper.

Is there any way to have a dock on both the bottom and side of your desktop?

I was just looking to organize my dock a little better and wanted to run a dock along the side of my desktop as well as along the bottom where I normally have it. Is that possible in any way?

Sorry, no.
Dock can be only positioned at bottom or on the side left or right.
Best.

Is there a way to bring back the old Expose?

the main reason I loved expose was that you can move files between files with expose open.
I'm an art director so I'm constantly dragging images from one photoshop file to another, or from one window into a photoshop file, and expose made this really easy to do. I could click on a layer or file, initiate expose and drag said file or layer to a new window or document.
Now mission control is straight up pointless, other than just showing what windows are open it serves no purpose. I can't drag files between windows or open photoshop documents anymore, you can't click on a file and start to drag then double tap on your mouse to launch it.
It really is a BIG flaw in lion. Everything else is great but why would Apple remove such a powerful tool entirely?
Why no leave the option in to turn it back on like the old school scrolling (which is better as well)
Come on Apple!

Currently, the only way to get the old behavior of spaces back is to reinstall snow leopard. I am personally unaware of third party solutions, but that doesn't mean there aren't any.

Is there any way to bring back the Documents window? [Android]

I liked the Documents window in the previous version where all the PDFs of the phone was shown, plus theor source folder was indicated. Now, it's somehow troublesome to go through my phone's folders just to look for a certain file.

Hi Leslie,
Are you using an Android device or an iOS device? My understanding is that you are able to find local files on your device but it is painful without a consolidated list of PDF's. In addition, if you are using an Android device can you please share your Android OS version (Settings-> About Phone) with us.
-Rahul

Is there a way to bring back link information at the bottom-left when highlighting a weblink or email address in FF29?

Similar Messages

Maybe you are looking for