Is there a way to bypass all inserts on a track at once?

When recording with a ton of inserts, the latency is in the vicinity of about .5 seconds - so is there a way to bypass all inserts on a channel at one?
So far, I have to open each one and hit "bypass" but I do it so much, since I need to hear it after the inserts, it ends up taking a lot of time.
I also tried to save the channel setting, reset the channel, then re-insert the channel, but then all automation is lost....

Not as far as I know, but there are two things that might help.
1) You don't need to open a plug-in to bypass it - just option-click on its insert slot.
2) Check out low latency mode. (prefs -> audio -> general) which will bypass plug-ins which exceed your latency preference. Click it off when you're done.

Similar Messages

Is there a way to view all cameras in the timeline at once without creating a multicam sequence?

Is there a way to view all cameras in the timeline at once without creating a multicam sequence? Is there some kind of window I can open where they will show up? I am scrubbing a timeline and I would like to see all the cameras at once.

The multicam monitor only shows multiple clips at once when they are part of a mutlicam sequence. is there some reason you don't want to use them inside a multicam sequence for previewing?
Here is a possible workaround, if your workflow circumstances will permit it:
Apply a pip preset effect to each clip in the timeline. Use UL, UR, LL, LR presets and up to four video tracks will display at once. If you need to see more than that, you'll need to tweak their position parameters by hand. When you're done previewing them all at once you just need to delete their effects from the Effects Controls panel.
I know it's not that neat or quick, but it will let you see everything at once in the program monitor.

Is there any way to change user operations on multiple tracks at once?

I have a complex project (99 tracks, dozens of menus and scripts). I need to make one version of this DVD for the end client (teenagers at health clinics) who will be forced to view it in a specified way, and another version for educators (staff at the clinics) who will be allowed to fast-forward and have access to a menu from which they can jump to different points in the DVD.
I have different menus to serve as "first play" for these different versions so that I can easily switch between versions when burning disc images, and I have set up GPRMs to make navigation different for the two versions automatically. My problem now is that I want to disable forward scan, next program, root menu, and title menu for the client version. As far as I can tell, I have to do that independently for every single track and menu. Bleah. This is especially annoying since the DVD is still in development, so I am continuing to change small things and will need to keep both versions up to date as I do.
Is there any way to select multiple tracks/menus and change user operations on all of them? Or any other work-around or script that could do it? I thought this would be a perfect task for the automator, but I'm not very familiar with that application and don't know how (or if it's possible) to create new actions other than the ones that are available.
Any ideas?
thanks!
Julie

Thanks. But the disc inspector only appears to let me change things like where the title menu button takes you, not detailed user operations. I have pretty much given up on this being anything other than a giant hassle, but if anybody knows whether a script could do this, I would be eternally grateful.

Is there a way to view all of my appstore reviews at once?

Hey there,
I am curious as to whether or not there is a way to go and see all of the reviews I have made in a list style. The reason I ask is because I haven't been sure whether or not my reviews are getting through and I would like to know if there is a way to view them to see if any of them are actually up. Is there a 24 hour wait before they appear or something that I wasn't aware of? I'm just hoping that all of that time and effort I just spent wasn't all wasted.
Thanks, I appreciate any help you can render.

You can do this in iTunes on your computer, click on iTunes Store > click Account > click Manage next to Reviews and Ratings.
More info in this Apple doc -> iTunes Store: How to remove a review you've written

Is there a way to stop all loops( While and For )at once or close the big application with just a button?

How to sop all loops in the application (While, For and subvis ) with a single button? Use the event sturucture?

Yes, if you just need to kill the running application, you can use an event structure in a parallel loop. (See attached code image). Pressing the stop button stops everything! :-)
(Alternatively, you could even call "quit labview".)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Killall.png ‏6 KB

How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?

How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?

Actually, you can email up to 5 at a time from the Photos app. Select any more and the email share option will not appear.
If you explain why you need to email large numbers of photos, we might be able to offer an alternative.

I just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password 9which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

i just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password (which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

I assume that you don't have the installation discs, so:
1. Reboot
2. Hold command + s key down after you hear the chime.
3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not.

I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8). If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
Insert the disk then power down
HOLDING the C key, power up to boot from the disc.
Get to Disk Utility
If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
When it completes the Repair process successfully as indicated in DU, do a shut down. If Repair is not successful then an different course of action is indicated below.
Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM DO NOT ERASE THE DISK OR VOLUME FIRST. REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system. After re-installing the OS do a software update. Note that ERASING the disk is NOT required to do an OS re-install. This allows your existing data and application files to remain.
If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk and try a re-install.
If that fasils then you may have a defective hard disk.

Is there any way to edit all the transitions in a project at the same time?

I chose "insert with transition" when adding clips to my timeline, but the default is set for one second, which is longer than I'd like. I know how to change the duration of each transition one at a time, but is there any way to select all the transitions (there's about 90 of them) and adjust the duration for all of them at the same time?
That's my main question, but I also would like to change the default cross-dissolve transition to be 15 frames instead of 30 for future projects. Anybody know if I can do that? I know I can create a 15 frame cross-dissolve and make it a "favorite", but it seems it would just be easier to change the default one instead.
Thanks,
Stephanie

I know I can create a 15 frame cross-dissolve and make it a "favorite", but it >seems it would just be easier to change the default one instead.
That's your only choice using FCE.
Al

If I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

if I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

Try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again. If it still won't back up, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

In ICal is there a way to see all of the text in all day events on the month view of the calendar. Seems to wrap text only if there is a time on the event

In ICal is there a way to see all of the text in all day events on the month view of the calendar? Seems to wrap text only if there is a time on the event

The paths won't agree on the two OSs so a simple XML import isn't likely to work.
See Sync iPod/iPad/iPhone with two computers and, if needed, Make a split library portable. The techniques in the first link will work when moving the library between Windows and OS X as long as the library is "portable", but iTunes takes quite some time checking the database when the library is opened under a different OS.
tt2

After I watch a podcast I delete it. When I go back in the next day it shows 500-600 episodes I have to delete manually. So 2 questions.... Is there a way to stop this from happening and is there a way to delete all. This is getting frustrating.

After I watch a podcast I delete it. When I go back in there are 500-600 episodes and I have to delete each one manually. Is there a way to stop this from happening or is there a way to delete all at once. It's getting very frustrating.

Had all these issues. Bit the bullet and downloaded the Downcast App ($1.99). Much better expereince and a lot more features. Sad.

Is there any way to browse all sales excluding rental only & short films?

Is there any way to browse all film sales excluding rental only & short films?
I am finding the laborious process of clicking through page by page in cover view annoying to the extreme to search new additions to the available film sales lists every week or so. The display page is always slightly deeper than my window so it means having to scroll down to view the last row of covers and click next page.
Apple... Is there any chance of having an auto scrolling (with pause and previous/next feature) film cover flow with description view of each film large enough to view the image, preferably filling the screen, perhaps also a feature in Front Row that will show available films to buy/rent in iTunes or an RSS screen saver that could give you a constant update of the last 10/20 films added?
Something that will make the task of searching for titles you might like to buy less of a 'task' and more intuitive. I don't really want to browse by Genre and a Cover image only view tells you nothing about the film.
If the screen in front of me gave me a constantly (controllable when required) changing view, similar to the content displayed in Front Row of a title you have selected i'd be happy.
Message was edited by: Rob Wilton

Could you please tell me how to view all the movies I have rented?

Is there a way to delete all email messages from inbox without checking each one at a time on my iphone 4?

Whenever I want to delete messages in the inbox on my iphone 4, using v4.2.8, I have to manually check each one and then delete them the checked ones as a group. Is there a way to select all and delete them at one time? I love the phone and it is a little complaint, but I often get 50-60 work related messages which I scan then delete because the originals are on my work computer. Thanks.

paulcb wrote:
Also, the iPhone is not a standalone device and obviously doesn't have a full blown mail client... it's an adjunct to your computer. If you want to delete a lot of emails, do it on your computer. You could also log into your webmail using a browser on your iPhone and do it from there.
You have a point, but you're just helping exposing the misery a little more: I actually DO delete the emails in WebMail, very easily. The problem is the sorry state of the Apple email client, that does not replicate those actions on the device, so I have to delete the messages TWICE--once on my computer, with a couple of clicks, and then on my iPhone, with a couple (hundreds) finger gestures.
As to your point that the iPhone is not a standalone device: that's nonsense. The iPhone does a lot of things that users thought IMPOSSIBLE just 10 years ago. Are you saying that the addition of a simple feature like a "Delete All Messages" button is too much for a mobile device? Then what to say about Siri, a complex-beyond-our-imagination system that incorporates voice recognition, AI, searching and other hard-to-grasp technologies, all at our fingertips?

My computer keyboard has a bad "M" key so I cannot login into my computer from boot is there a way to bypass the login to reset my macbook pro

my computer keyboard has a bad "M" key so I cannot login into my computer from boot is there a way to bypass the login to reset my macbook pro

Late reply, but if anyone is experiencing the same problem, I've found a solution. For whatever reason, some macbooks don't recognize usb flash drives during the boot-up phase, even though the usb ports themselves are powered (I tested this with a multimeter). The solution then, was to use an external USB hard drive that has its own power supply to install Snow Leopard. I don't know why, but it's the only way I got my macbook (Macbook 2,1/A1181) to recognize the install drive. Every was smooth sailing from there!

Is there a way to bypass all inserts on a track at once?

Similar Messages

Maybe you are looking for