Is there a way to bypass the first two inspection block after first cycle in Vision builder AI?

I want to inspect the C-C of a matrix of holes (holes side by side). But when I do re-cycle the routine, the hole #'s change location (not in same place twice) and the my C-C are all not side by side and all over the place. For example, diaganal 4 holes away, etc...

laj,
I'm not sure that I completely understand the question that you are asking in your post. You may want to repost your question with some additional information and explanation to allow this forum to help you more effectively.
As for the question that you posed in the title of your email, can you bypass the first two steps of your Vision Builder for Automated Inspection (VBAI) script? The answer is unfortunately no. VBAI is designed to repeatedly run through the same script and does not allow only a portion of the script to run.
If you need more control over your application than VBAI can provide, you may need to move a programming language like LabVIEW, which will allow for lower level decision making.
Please post a follow up if you have any additio
nal information you would like to add, or have additional questions.
Regards,
Jed R.
Applications Engineer
National Instruments

Similar Messages

  • I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

    I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

    If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
    Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8).  If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
    Insert the disk then power down
    HOLDING the C key, power up to boot from the disc.
    Get to Disk Utility
    If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
    When it completes the Repair process successfully as indicated in DU, do a shut down.  If Repair is not successful then an different course of action is indicated below.
    Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
    If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM  DO NOT ERASE THE DISK OR VOLUME FIRST.  REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system.  After re-installing the OS do a software update.  Note that ERASING the disk is NOT required to do an OS re-install.  This allows your existing data and application files to remain.
    If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
    If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk  and try a re-install.
    If that fasils then you may have a defective hard disk.

  • My computer keyboard has a bad "M" key so I cannot login into my computer from boot     is there a way to bypass the login to reset my macbook pro

    my computer keyboard has a bad "M" key so I cannot login into my computer from boot     is there a way to bypass the login to reset my macbook pro

    Late reply, but if anyone is experiencing the same problem, I've found a solution. For whatever reason, some macbooks don't recognize usb flash drives during the boot-up phase, even though the usb ports themselves are powered (I tested this with a multimeter). The solution then, was to use an external USB hard drive that has its own power supply to install Snow Leopard. I don't know why, but it's the only way I got my macbook (Macbook 2,1/A1181) to recognize the install drive. Every was smooth sailing from there!

  • If I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

    if I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

    Try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again.  If it still won't back up, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.

  • I have a macbook pro 10.6.8. My question is, is there a way to bypass the startup items (programs) when booting the computer?

    I perform music with my Macbook pro.  so I have several music applications that startup automatically when the computer boots. they look for the audio interface that they are supposed to talk to and then everything is good.  but sometimes I boot my computer when it is not connected to the audio interface and this breaks the conncetion link between the music applications and the audio interface.  If the is a way to bypass (turn off) the startup items as I boot the computer when it is not connected to the audio interface, then I'd no longer have this problem.  is there a way to do so?
    Burr

    Burr Johnson wrote:
    ...but sometimes I boot my computer when it is not connected to the audio interface and this breaks the conncetion link between the music applications and the audio interface.
    This is a third party software problem you need to contact the developer to fix, perhaps they already have a update and you need to apply it.
    Nothing should "break" if it's not connected to hardware as with portables people are always connecting and disconnecting.
    If it's breaking the connection between two other pieces of software then it's poorly designed.
    Some hardware + software combinations are meant for pernament desktop installations as a integrated system, not for portables.
    The only case I can think of that software won't work without the hardware attached if the hardware is a form of content protection, that it won't run without the dongle etc., attached.

  • Is there a way to bypass the form Validation

    I'm getting really upset with the Coldfusion built-in form validation for any HTML formfield ending by _date , _required, _time and so on...
    My application proposes to the users to create some Properties for an object and later on to modify the values for all these properties.
    I've got a piece of code building dynamically some form fields named just like the properties (by a simple cfloop on a DB query getting the property list).
    And a registering page to records the new value in the DB.
    But it crashes onto the classical "
    Form entries are incomplete or invalid.
    I can't control what the users set as property name (one of them was Checklist_required).
    Is there any way to prevent this error by disabling this auto validation ?
    (I'd like to avoid having to rename any field dynamically created and rename any forms variables before registering them on the DB : it's just NO WAY for me to rename the properties created by the users)

    Fober1, that's not how it works.  It's pretty much the ultimate example of the disjoint between how HTML forms work and how the naive CFML Cfform / cfinput design wished they work.
    When a request is being processed by the coldfusion server, it just looks at the list of FORM (POST) variable names (whether it came from cfform or not; URL/GET params are exempt), and for those with certain suffixes (_date, _required, etc.), and it assumes their existence is intended to request validation another field without that suffix.  It doesn't actually know or care whether form submission, nor the HTML rendered in the user's browser, actually came from "cfform" or "cfinput".   The composition of the request that comes in (when a user clicks on "submit", or a hacker uses any tool imaginable) is out of the server's hands.  The cfform code is not used during form submission processing, because the receiving template (the form action="this_one.cfm") doesn't even have to be the same template that has the cfform in it. There could be multiple conflicting cfforms directing users to request the same template on a single site, with or without the validation, even without considering what a whole other person might decide to send to your server.
    The fact that it can work as intended for a typical user is irrelevant, because the purpose of validation is to deal with the atypical situation.  A malicious or merely mischievous user that wanted to circumvent the validation would simply modify a copy of the page to leave out the "validation request" fields.    For the developer to truly validate the input, additional code must be written, making the feature not only inadequate, but a complete waste of time.  There absolutely should be a way to disable it at worst; Ideally, it would be taken out of coldfusion completely.  It's not only useless, it's a security risk, wooing programmers to write code that doesn't do what they think it does.
    The error message it gives isn't so great, either, and it's a pity that it can't show more than one validation message at a time, either.  If more than one input is invalid, you could end up going through one round after another of submit + back button.
    edit: I forgot to add the other important reason that this feature should never have existed: It is a nuisance to everyone else who doesn't want to use it at all, too!  Those suffixes simply couldn't have been a worse choice, colliding with probably thousands of peoples' variable names.  Why not "*_cfval_date" "*_cfval_time" etc?

  • Is there a way to keep the apps on my Ipod after upgrading to IOS 5?

    I plugged my Ipod touch (4th generation) into my mac and itunes prompted me to upgrade to IOS 5 (which I would like to do).  However, it says that I'll lose all my apps...
    Is there are way to restore these apps after the IOS 5 has been downloaded/installed?  I don't want to go ahead with this process if I have to buy all the apps (with all the information I've stored in them) again!
    thanks in advance for the help!

    - Transfer the app to the computer by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Connect the iPod to the computer and make a backup by right-clicking on the iPod under Devices in iTunes and selecting Back Up.
    - Restore the iPod from that backup. That should also update the iPod.

  • Is there any way to bypass the

    wheels in the calendar and just enter date and time from the keyboard?  I find getting the wheels to stop accurately to be nearly impossible, rendering the calendar a major annoyance.

    Afraid not.
    Now if you have access to another calendar, for example, if you have outlook on your computer, you can make the appointment there then e-mail it to yourself and import it into the calendar app and the app will display your appointment.
    Is it faster than the date wheels? Dunno. just another way to do it.
    Another way would be to look for another app.

  • HT1414 Is there any way to recover the backup of your iPhone after restoring to factory settings?

    I restored my iPhone4 to factoring settings without realizing it. I need some of the things that were on my last backup before i restored it. I was wondering if there was any way to reverse this.

    With an iTunes back up you can find if you have one by following the steps below if you have a PC/Mac.
    Windows:
    Edit>Preferences>Devices
    Mac:
    iTunes>Preferences>Devices
    With iCloud follow the steps below.
    1. Go to Settings>iCloud
    2. Sign In
    3. Tap Storage & Back up
    4. Manage Storage
    This will show back ups made on iCloud.
    If you have a back in iTunes or iCloud restore from that back up and see whatdatat comes back on the phone.
    Hope this helps

  • OAM In Custom Login Form: Is there a way to get the user that was blocked?

    Hi
    I'm creating a custom login form and I need to capture which user was blocked if I get an OAM-5 error code. There is no parameter that specifies which user was filled and I can't capture it before because the login page post directly to the OAM Server.

    Hi
    I'm creating a custom login form and I need to capture which user was blocked if I get an OAM-5 error code. There is no parameter that specifies which user was filled and I can't capture it before because the login page post directly to the OAM Server.

  • Is there a way to bypass user login as its not being recognised

    I have disabled automatic login and now I can't login as it does not like the username an or password, is there a way to bypass the user login, please help ASAP

    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

  • Is there a way to bypass activity type/ cost element for CJ20n Activity?

    Hi Experts,
    Is there a way to bypass the activity type set in the Internal tab of a particular activity in CJ20n?
    Here's a background of the scenario:.
    - In CJ20n, under WBS element 100->Network 10->Activity 1, under the internal tab, the activity type set up is ACT1
    - Under person assignment, I have 2 resources assigned Person 1 and Person 2, with the following values:
      Person 1          Work: 1.0h Dur. 10D
      Person 2          Work: 2.0h Dur. 15D
    - In infotype 135, person 1 has a cost element set as ACT2 and person 2 has a cost element ACT3.
    - The problem is that when you bring up the Plan/ Actual comparision report (ctrl+F11 in CJ20n), the costs are consolidated for ACT1 and negates the cost elements for Person 1 and Person 2
    Is there a way to bypass this and use the individual cost elements set up for person 1 and person 2?

    I dont think this is possible for the scenario that you explained. I mean, you have a single activity which has 2 resources assigned and each of these resources has a different activity type. Standard SAP allows only 1 activity type for an activity.
    Just a query, why dont you create 2 different activities for these resources since the activity types are diff for both?

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

    I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?

    I would also like this issue addressed.
    I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
    I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
    Message was edited by: picardsm

  • I have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)

    i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)   I NEED HELP BADLY PLEASE....

    What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.

Maybe you are looking for