Is there a way to bypass user login as its not being recognised

I have disabled automatic login and now I can't login as it does not like the username an or password, is there a way to bypass the user login, please help ASAP

http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

Similar Messages

  • Is there a way to create user logins or some other way to ...

    Is there a way to create user logins or some other grouping for a set of applications to use (memory) resources optimally -- for example only mail and Safari and Word in one grouping and another for Safari and an audio recording application, etc.?

    It is possible to use Parenal Controls to limit which applications can be used be a particular user account.
    But it's not really necessary as far as managing memory.
    Matt

  • My computer keyboard has a bad "M" key so I cannot login into my computer from boot     is there a way to bypass the login to reset my macbook pro

    my computer keyboard has a bad "M" key so I cannot login into my computer from boot     is there a way to bypass the login to reset my macbook pro

    Late reply, but if anyone is experiencing the same problem, I've found a solution. For whatever reason, some macbooks don't recognize usb flash drives during the boot-up phase, even though the usb ports themselves are powered (I tested this with a multimeter). The solution then, was to use an external USB hard drive that has its own power supply to install Snow Leopard. I don't know why, but it's the only way I got my macbook (Macbook 2,1/A1181) to recognize the install drive. Every was smooth sailing from there!

  • Is there a way to track user logins, or login metrics?

    Hello -
    We are using OID to provide SSO for an employee portal and we are about to bring another partner application online using the same OID server. We are looking for a way to determine how many people currently use the portal and subsequently will be looking for a way to track logins for the new app. Does OID keep this information in a table? Can I find this info in the IAS console anywhere?
    Thanks in advance for any info.
    Brian
    EDIT: This thread provides some good info on this: OID user tracking
    Edited by: bantonczak on Dec 1, 2010 9:09 AM

    This thread contains good information on user logins with Oracle Portal and OID SSO
    OID user tracking

  • I just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password 9which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

    i just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password (which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

    I assume that you don't have the installation discs, so:
    1. Reboot
    2. Hold command + s key down after you hear the chime.
    3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
    (Type these commands very carefully)
    mount -uw /
    rm /var/db/.AppleSetupDone
    shutdown -h now
    4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not.

  • Is there any way to report users for spamming?

    Is there a way to report users for spamming?
    One of them in this forum is now editing their handle to nearly match genuine users.

    Use the [url http://forums.oracle.com/forums/forum.jspa?forumID=29]Community Feedback and Suggestions Forum to report spam and for question about the Forum performance login performance etc... but not for product related questions.
    Tony

  • I sold my iPhone 4s and the buyer can't get into it without entering in my apple ID, is there a way to bypass this?

    I sold my iPhone 4s and the buyer can't get into it without entering in my apple ID, is there a way to bypass this? I have deactiviated via my laptop but not on the device itself, i also restored the iphone to its factory settings.

    "is there a way to bypass this?"
    Only by you eitehr giving the new user your iCloud username and password or by you getting the phone back and entering it yourself.

  • I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

    I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

    If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
    Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8).  If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
    Insert the disk then power down
    HOLDING the C key, power up to boot from the disc.
    Get to Disk Utility
    If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
    When it completes the Repair process successfully as indicated in DU, do a shut down.  If Repair is not successful then an different course of action is indicated below.
    Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
    If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM  DO NOT ERASE THE DISK OR VOLUME FIRST.  REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system.  After re-installing the OS do a software update.  Note that ERASING the disk is NOT required to do an OS re-install.  This allows your existing data and application files to remain.
    If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
    If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk  and try a re-install.
    If that fasils then you may have a defective hard disk.

  • Is there a way to bypass all inserts on a track at once?

    When recording with a ton of inserts, the latency is in the vicinity of about .5 seconds - so is there a way to bypass all inserts on a channel at one?
    So far, I have to open each one and hit "bypass" but I do it so much, since I need to hear it after the inserts, it ends up taking a lot of time.
    I also tried to save the channel setting, reset the channel, then re-insert the channel, but then all automation is lost....

    Not as far as I know, but there are two things that might help.
    1) You don't need to open a plug-in to bypass it - just option-click on its insert slot.
    2) Check out low latency mode. (prefs -> audio -> general) which will bypass plug-ins which exceed your latency preference. Click it off when you're done.

  • I have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)

    i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)   I NEED HELP BADLY PLEASE....

    What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.

  • I lost my password and cannot log on to my MacBook Pro.  MacOS X window opens upon startup, with my log on name, requesting password, but I cannot remember it.  Is there a way to bypass this window and reset my password?  Cannot get to System Preferences

    I lost my password and cannot log on to my MacBook Pro.  MacOS X window opens upon startup, with my log on name, requesting password, but I cannot remember it.  Is there a way to bypass this window and reset my password?  Cannot get to System Preferences or Apple Menu
    Thanks!

    Yes.
    https://discussions.apple.com/thread/4913069

  • If I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

    if I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

    Try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again.  If it still won't back up, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.

  • Is there a way to bypass activity type/ cost element for CJ20n Activity?

    Hi Experts,
    Is there a way to bypass the activity type set in the Internal tab of a particular activity in CJ20n?
    Here's a background of the scenario:.
    - In CJ20n, under WBS element 100->Network 10->Activity 1, under the internal tab, the activity type set up is ACT1
    - Under person assignment, I have 2 resources assigned Person 1 and Person 2, with the following values:
      Person 1          Work: 1.0h Dur. 10D
      Person 2          Work: 2.0h Dur. 15D
    - In infotype 135, person 1 has a cost element set as ACT2 and person 2 has a cost element ACT3.
    - The problem is that when you bring up the Plan/ Actual comparision report (ctrl+F11 in CJ20n), the costs are consolidated for ACT1 and negates the cost elements for Person 1 and Person 2
    Is there a way to bypass this and use the individual cost elements set up for person 1 and person 2?

    I dont think this is possible for the scenario that you explained. I mean, you have a single activity which has 2 resources assigned and each of these resources has a different activity type. Standard SAP allows only 1 activity type for an activity.
    Just a query, why dont you create 2 different activities for these resources since the activity types are diff for both?

  • Is there any way to forse user to put at least 5 characters when using LOV?

    Hi gurus,
    I have a question.
    Is there any way to force user to put at least 5 characters when using LOV?
    I want user to put at least 4 characters before/when using LOV.
    Is there any way to do that?
    Thank you for your answers.
    Nerijus

    Hello,
    i've tested it both on 6i and 10g and also set the lov name at runtime.
    All i can say is, it does what it is supposed to do.
    So you should give it one more try:
    - leave the item properties NULL ( LOV name ) and NO ( Validate_From_List )
    - add following code in the WVI - Trigger
    IF :AUFTRAG_NEU.PN IS NOT NULL AND LENGTH ( :AUFTRAG_NEU.PN ) < 5 THEN
      Show_Message ( 'Bitte 5 Zeichen eingeben' );
      RAISE FORM_TRIGGER_FAILURE;
    ELSIF :AUFTRAG_NEU.PN IS NULL THEN
      NULL;
    ELSE
      SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', LOV_NAME, 'LOV_PN_PROJEKT' );
      SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', VALIDATE_FROM_LIST, PROPERTY_TRUE );
      IF SHOW_LOV THEN
        NULL;
      END IF;
      SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', VALIDATE_FROM_LIST, PROPERTY_FALSE );
      SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', LOV_NAME, '' );By the way, what exactly doesn't work?
    Bernd

  • Is there a way to bypass a password lock that has been forgotten?

    My 9 year old created a number password on my ipod and can't remember what she used. Is There a way to bypass a passward that has bee forgetten and remove it?

    Not sure about the Outlook Temp folder, but if you can locate the document in Finder, then right click it and select Open With (Word or whatever).
    Richard

Maybe you are looking for