Is there a way to calibrate the touchscreen on an iphone5s? My screen is possessed and starts going crazy completely on its on
iPhone 5S touchscreen is not responding correctly to my touch. Then is acts like I'm holding down letters on the keyboard and randomly opening Apps, and I am unable to get any control over my phone. I have tried resetting it multiple times. It may stop it for a min or so, but then it starts back up. I updated to iOS8 hoping it would fix the problem, but it did not. And another issue I'm having is my screen is not turning off when making a phone call. The screen never turns black when the ear piece area is covered up. Therefore it is muting and going to FaceTime constantly. I am getting extremely frustrated with my iPhone. HELP ME.
Hi GodseyFamily,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue with the Multi-Touch display on your iPhone, it’s behaving erratically. Take a look at the article linked below, it provides a lot of great troubleshooting tips and suggestions that will resolve issues like this.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
I hope this helps.
-Jason
Similar Messages
-
Is there a way to "calibrate" the magic mouse? Batteries are good. I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled-flashing between the app I am in and launchpad. When right-click is enabled I have to go to the extreme upper left of mousepad to click or it is interpreted as right-click. Won't consistently "scroll". Suggestions?
Here's some things you could try....
Reset your computer's PRAM
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Mac OS X: Starting up in Safe Mode
http://support.apple.com/kb/HT1455 -
I smashed my ipod, is there any way to fix the touchscreen as it is now stuffed
i smashed my ipod, is there any way to fix the touchscreen as it is now stuffed
Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11?
Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11? Most editing apps--like Final Cut Pro, QuickTime Pro, Avid, etc.--use this convention. I find not having it slows editing down considerably? I don't see it listed in keyboard shortcuts; is there any way to add it? Thanks!
I don't think so. If you click iMovie/Help, you will see a list of all keyboard shortcuts.
Here they are.
Get information
Open iMovie Help
Command-Shift-Question Mark (?)
Open the Project Properties window
Command-J
Open the Project Theme window
Command-Shift-J
Show playhead info
Shows date, time, and keywords for video frames above the playhead.
Command-Y
Import and export
Import from camera
Command-I
Export movie
Command-E
Play video
Play video beginning from the frame beneath the pointer
Space bar
Play 1 second of video total—0.5 seconds before the pointer and 0.5 seconds after
Plays only 0.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Left Bracket ([)
Play three seconds of video total—1.5 seconds before the pointer and 1.5 seconds after
Plays only 1.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Right Bracket (])
Play selection
Slash (/)
Play selected event or project from the beginning
Backslash (\)
In the Event browser, speed up playback from 1x to 2x to 4x by pressing the key one time or two times, respectively
Right Arrow key
In the Event browser, slow down playback from 4x to 2x to 1x by pressing the key one time or two times, respectively
This action works only if you’ve already sped up the playback.
Left Arrow key
When playing Event video, jump forward 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Down Arrow key
When playing Event video, jump back 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Up Arrow key
When playing Event video, jump forward to the next clip
Down Arrow key
When playing Event video, jump to the beginning of the current clip, or jump to the previous clip if the playhead is near the beginning of the current clip
Up Arrow key
Play the selected Event or project full screen
Command-G
Exit full-screen mode
Escape (Esc) key
Move the playhead by one frame
Left Arrow key or Right Arrow key
Freeze the playhead
Hold down Control key
When skimming, keep the cursor in the middle of the row
Option-Shift
Manage projects and events
Create new project
Command-N
Move to Trash
Moves the selected project (in the Project Library), Event (in the Event Library), or Event clip (in the Event browser) to the Trash. If only part of an Event clip is selected, the entire clip is moved to the Trash.
Command-Delete key
Open iMovie preferences
Command-Comma (,)
Page setup
Command-Shift-P
Print selected Event or project filmstrips
Command-P
Select and edit video
Select an entire project or Event clip when a partial clip is selected, or select all project or Event clips when an entire clip is selected
Command-A
Select to playhead
Expands or contracts the selection from the nearest selection border to the playhead.
Shift-A
Deselect all clips
Command-Shift-A
Add selected frames to project
E
Split a clip on both ends of a selection (longer than five frames), or at the playhead position if nothing is selected
Command-Shift-S
Cut selected frames
Command-X
Copy selected frames
Command-C
Paste selected frames
Command-V
Paste all adjustments
Command-Shift-V
Paste video adjustments
Command-Option-I
Paste audio adjustments
Command-Option-A
Paste crop adjustments
Command-Option-R
Paste cutaway, green-screen, or picture-in-picture adjustments
Pastes adjustments, depending on which type of video is selected.
Command-Option-U
Paste video effect -
Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?
Yes.
1) Connect an Ethernet cable from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule
2) Go through the standard configuration suggested by the setup "wizard"
3) Then manually turn off the wireless function using AirPort Utility -
Is there a way to set the iPhone to have a black screen with white text?
I found the "Invert Colors" option under Settings > General > Accessibility, and like it a lot. It provides enhanced readability.
The problem is that it inverts all colors, even for apps. So when I view a web page in Safari, all the colors are inverted for the images.
And when I view my photos in Photos, these are also inverted as well.
Is there a way to set up the iPhone to default to a black screen and white letters for the OS, but allow the apps and photos, etc. to
be viewed in their regular colors. For example, can I run Photos to view my photos on a black background but view the photos in their
normal coloring?I'm afraid that is not possible, maybe this could bee a step in that direction if you use the mentioned Zoom function:
Invert Colors and Grayscale
Sometimes, inverting the colors or changing to grayscale on the iPhone screen makes it easier to read.
Invert the screen colors. Go to Settings > General > Accessibility, then turn on Invert Colors.
See the screen in grayscale. Go to Settings > General > Accessibility, then turn on Grayscale.
Turn on both effects to see inverted grayscale. You can also apply these effects to just the contents of the zoom window—see Zoom on page 150.
copied from page 151 of the user guide iOS8 -
We have been loyal Verizon customers for almost a decade and have had nothing but great things to say about our service...until about 2 months ago. Two months ago my daughter moved out of state and decided to remove herself from our family plan, Before doing so, she call Verizon's customer service department to see when her contract was up. She wanted to keep her Verizon service until the end of her contract to avoid the termination fee. The service department assured her that her contract was already up and no termination fee would be charged. You can imagine my surprise when we were charged a $138 termination fee for her line on our next bill. I called customer service again and spoke with another representative (whose name I will not disclose) and was assured that the termination fee was a mistake and that I should simply not pay that portion of the bill and the charge would disappear on the next billing cycle. I did as she said and was shocked a few weeks later when I received a less than civil call from Verizon threatening to terminate my service the next day if I did not immediately pay the $138. My wife received a similar nasty message on her phone. I explained the situation to the rep on the phone, was told that the information my daughter and I received from 2 previous representatives was incorrect, and was told to pay immediately. My daughter and I went through all the proper channels to ensure no charges from termination fees, and both of us were given misinformation on 2 separate occasions. Is there any way to hold this company accountable for its mistake? I have been in sales all my life, and if an incorrect price is quoted, I have to honor the incorrect price,even if it costs me money. This is the worst customer experience I have ever had with any company, and I'm afraid that it will eventually cost Verizon not one but five long-time customers.
I shouldn't have to "chalk it up". This company, like other companies, should be held accountable for wrong information. We went through all the proper channels to ensure this wouldn't happen. I know this fee gets waived on a regular basis for a multitude of reasons. Moving nonwithstanding, I was told by two different people who had no knowledge that my daughter was moving that she owed nothing. If two different company employees tell me there will be no ETF, I will take them at their word. This should be good enough. What's the point of getting it reactivated if she can't use it where she lives now?
-
I am trying to get a certain app back on my main screen from the manage storage section of my ipad. Does anyone know how to do that?
Solve my own problem!!!!!!!!!!!!!
-
After reformating my computer isit possible to get the music from my ipod back on the computer and to add new music that I have downloaded?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
when i try to type a number, it's almost impossible to get a "1" - I keep getting "2" instead of "1". It's quite frustrating. Is there a way to calibrate the touchscreen?
No way to calibrate the touchscreen.
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Also, try typing in landscape. -
Is there a way to retain the original date after editing?
I am using PSE 11 on a MacBook Pro, OS X (10.3). I have a lot of old pictures to edit, and they are in date order, which is how I want them.
However, when I edit a picture and save it, it moves it to the bottom, with today's date instead of the original date. I have them set to save with the original as a version set.
Is there any way to retain the orignal dates, short of having to go in and reset the date on every picture after I save it? I really want them to be in date order under their original dates.
BTW, I used earlier versions that were Windows-based, and this didn't happen. When I saved them, the version sets stayed where they were.
This is really frustrating!SK Prairie Chicken a écrit:
I'd like an answer to this too.
What's your problem exactly?
The 'date taken' is never changed by editing a picture. -
HT1435 During normal charging phase is there a way to see the estimated battery% ?
A1285 (EMC 2287) iPod nano 4th Gen
During normal charging phase is there a way to see the estimated battery% ? If I am at 10% and plug in to charge and it takes 30 minutes to get to 55% then I know there are about 30 more minutes of charging until I'm at 100%.There is an App at the App store called "Battery Magic". You can get a trial version, (free) that will show you what you want to know, including battery life, and how long you can play games, music and other things on your current battery life.
You can also download the full version. I think its $0.99. -
Is there a way to remove the pulldown tab?
Is there a way to remove the pull down tab that shows weather, stocks, reminders and ect? It’s very annoying and even gets triggered while in other apps while unwanted. In fact its one of the worst ideas they have ever added to the ipod. If I wanted to see the weather and stocks I would use the apps that are not removable to view them, don’t need another tab for that. Ive looked in all the settings and don’t see anyway to fix or change it. Please advise.
I dont belive so
-
Is there any way to change the type of Transport like workbench to Customiz
Hi All,
Here we are having very silly question.
Is there any way to change the type of Transport like from
Workbench to Customize and from Customize to Workbench within the same client.
Assume that there the no object associated with the transport.
Your quick respose is highly appreciated...
Thanks in Advance!No this cannot be done.
Both work bench and custimizing are separate entites when it comes to tranport layers config.
You cannot save a report change into customizing request this will be saved into work bench request only .
In the same way table entries or some customizing tasks can be captured only into custimizing tr.
Br,
Vijay. -
Dashboard, is there a way to copy the dictionary answer to a looked up word?
is there a way to copy the dictionary answer to a looked up word, copy and paste?Each time I highlight the defination the command copy will not work, is there a key sequence I need to use?
Works here, I just tested. (I assume you're talking about the dictionary widget on the Dashboard.)
confused |kənˈfyo͞ozd|adjective(of a person) unable to think clearly; bewildered: she was utterly confused about what had just happened | a very confused and unhappy boy.
Are you sure you're pressing command-c, not something like control-c? If you're new to Macs, the control-c keystroke from Windows may be so ingrained you're pressing that without realizing it.
Edit: Note that I didn't mean to imply you're not thinking clearly with the definition of the word I looked up, it was just the first word that popped into my mind!
Maybe you are looking for
-
The problem is: I download an pdf file from internet. Filename is containg skandinavian characters which are converted as "%D6 etc." When I try to open the file with N9 I get an error similar to: "file is corrupted, can not open the file". Yet the sa
-
Encore Photoshop ERROR 1 when burning DVD
I'm burning a Blue ray disc in ENCORE CS5, I always get "photoshop Error 1" when trying to create a menu. Any help. I'm on a Mac Richard Australia
-
Airport card with G4 - not connecting
I have an Airport Extreme base station connected to my home Windows computer. It appears to be set up fine and broadcasting fine. I get a good signal on my laptop MacBookPRo. I just installed a Airport Card in my older G4 733MHZ PowerPC. I believe it
-
Problems making a dvd of my movie stored on I movie
We have moved home movies to I movie and are trying to make a DVD and have encountered problems
-
2 questions about X1 in the home
Moved to x1 section.