Is there a way to change an interactive text field back into a picture box?
I'm working on recreating an interactive form and I mistakenly made a picture box a text field when I should have turned it into a regular text box.
I can't seem to find a way to change it back.
All my boxes are lined up and sized perfectly right now, so I'd rather not have to re-draw the box and re-align and measure everything again if I can avoid it.
Select text field with Selection tool. Object > Interactive > Convert to Object. Place your picture into the frame.
Similar Messages
-
Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.
Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software. -
My laptop hard drive crashed and I lost my ringtones, but they're still on my iPhone. If I sync my iPhone with the reimaged hard drive, I'll lose the ringtones from my iPhone. Is there any way to transfer ringtones from my iPhone back into iTunes?
Thanks, but ringtones not purchased from iTunes, created them just before computer crashed.just before the next scheduled biweekly backup.
I found and downloaded TouchCopy 12 for PC and was able to copy the ringtones from my iPhone to my Windows laptop very easily. It also enables you to transfer photos, memos, voice messages, etc. -
Is there a way to get a deleted text message back ?
Is there a way to get a deleted text message back ?
Yes, you could Restore your iPhone from your backup on iCloud and get the text. Any texting, or other items, you did between the backup and the Restore would be lost.
-
Is there a way to convert an interactive PDF of photos into a file that plays like a video?
I have a PDF with music created through InDesign, but Acrobat only allows the pages to self-turn if played in full view mode. This cannot work on a website. So, is there a way to convert this PDF into a "video" such that the pages turn automatically, like what Apple Iphoto does when you create an album or slideshow or book - it allows for a "video" of the imags to be created, with backdrop of music?
http://forums.adobe.com/community/indesign for program questions... or http://forums.adobe.com/community/acrobat
-
Is there a way to make two different text fields be "either or" like a "yes no" check box?
I'm have Acrobat 9 Pro on a Mac running Yosemite.
I have two text fields that each are formatted to have a number entered, but the user chooses which to fill out — either "number of weeks" OR "number of months" (two separate text fields). I don't want them to fill out both fields, only one of them.
Is there a way to set up these two text fields so that only one can be filled out? (Sort of like when you have a "yes" and "no" check the box field, you name them the same but have different export values?)
Thanks for any help provided.
~ bexterinniOnly by custom JavaScripting.
-
Is there a way to change my n8 text colour without...
I felt borad about my n8 text colour everytime i message my friend or exploring staff.The text colour just kept remain white and it doesn't suite my theme.The setting doesn't have any option for me to change my text colour so i came to seek help.
Thank-you for the reply, but the problem with that is that they wouldn't have the music either. Almost half of the songs our apple ID are kids songs.
-
Is there any way to edit the pdf text field design?
I dont want a black frame around text frames when a form is printed...
In Livecycle you could define various properties (like sunken box etc.), but not in FormsCentral?If you have Acrobat Pro you can edit a pdf form file to have the various field border properties that you describe. You would create the form in FormsCentral and save as PDF. Then you would do a Save a Copy on the form. Open the copy and select Tools->Form->Edit. You can then select the fields and set the border in the Properties dialog in the appearance tab. Once you have the form looking the way you want you would then re-import the copy into FormsCentral and send the file out to the world.
-
Is there a way to change the LUt extension form .CUBE to .cube. on export with this script in photoshop For MAC:
Chris Cox wrote:
The file extensions are written by the export plugin. (which incidentally has a comment that two studios wanted all caps extensions, but I failed to write down which ones in the comments)
To change the filenames, you'd want to add something at the end of doExportLUTs() that uses the supplied path and substitutes the desired extensions, then renames the file.
Thank you
// Export Color Lookup Tables automation in JavaScript
// IN_PROGRESS - why can't ColorSync Utility open any profile with a grid of 160 or larger?
// 150 works, 160 fails -- sent samples in email to Apple on Nov 8, 2013; they are investigating
// DEFERRED - right to left filenames (Arabic) come out wrong because of appending "RGB" and file extensions
// This seems to be a bug in JavaScript's handing of strings, not sure we can solve it easily.
// It might possibly be handled by checking bidi markers in UTF8 stream and adding custom handling for appending text/extensions.
@@@BUILDINFO@@@ ExportColorLookupTables.jsx 1.0.0.0
// BEGIN__HARVEST_EXCEPTION_ZSTRING
<javascriptresource>
<name>$$$/JavaScripts/ExportColorLookupTables/Menu=Color Lookup Tables...</name>
<menu>export</menu>
<enableinfo>true</enableinfo>
<eventid>9AA9D7D6-C209-494A-CC01-4E7D926DA642</eventid>
</javascriptresource>
// END__HARVEST_EXCEPTION_ZSTRING
#target photoshop
const appUIState = app.displayDialogs;
app.displayDialogs = DialogModes.NO; // suppress all app dialogs
app.bringToFront(); // make Photoshop the frontmost app, just in case
// on localized builds we pull the $$$/Strings from a .dat file
$.localize = true;
// from Terminology.jsx
const classApplication = app.charIDToTypeID('capp');
const classProperty = app.charIDToTypeID('Prpr');
const enumTarget = app.charIDToTypeID('Trgt');
const eventGet = app.charIDToTypeID('getd');
const eventSet = app.charIDToTypeID('setd');
const kcolorSettingsStr = app.stringIDToTypeID("colorSettings");
const kDither = app.charIDToTypeID('Dthr');
const keyTo = app.charIDToTypeID('T ');
const typeNULL = app.charIDToTypeID('null');
const typeOrdinal = app.charIDToTypeID('Ordn');
const kFloatWindowStr = app.stringIDToTypeID("floatWindow");
const typePurgeItem = app.charIDToTypeID('PrgI');
const enumClipboard = app.charIDToTypeID('Clpb');
const eventPurge = app.charIDToTypeID('Prge');
const keyExportLUT = app.charIDToTypeID( "lut " );
const keyFilePath = app.charIDToTypeID( 'fpth' );
const keyDescription = app.charIDToTypeID( 'dscr' );
const keyCopyright = app.charIDToTypeID( 'Cpyr' );
const keyDataPoints = app.charIDToTypeID( 'gPts' );
const keyWriteICC = app.charIDToTypeID( 'wICC' );
const keyWrite3DL = app.charIDToTypeID( 'w3DL' );
const keyWriteCUBE = app.charIDToTypeID( 'wCUB' );
const keyWriteCSP = app.charIDToTypeID( 'wCSP' );
const kScriptOptionsKey = "9AA9D7D6-C209-494A-CC01-4E7D926DA642"; // same as eventID above
const sGridMin = 7; // these must match the slider range defined in the dialog layout
const sGridMax = 256;
const sGridDefault = 32;
// our baseline UI configuration info
var gSaveFilePath = ""; // overwritten by document path
var gDescription = ""; // overwritten by document name
var gCopyright = ""; // "Adobe Systems Inc., All Rights Reserved";
var gGridPoints = sGridDefault;
var gDoSaveICCProfile = true;
var gDoSave3DL = true;
var gDoSaveCUBE = true;
var gDoSaveCSP = true;
gScriptResult = undefined;
// start doing the work...
main();
app.displayDialogs = appUIState; // restore original dialog state
gScriptResult; // must be the last thing - this is returned as the result of the script
function readOptionsFromDescriptor( d )
if (!d)
return;
if (d.hasKey(keyFilePath))
gSaveFilePath = d.getString( keyFilePath ); // will be overridden by UI
if (d.hasKey(keyDescription))
gDescription = d.getString( keyDescription ); // will be overridden always
if (d.hasKey(keyCopyright))
gCopyright = d.getString( keyCopyright );
if (d.hasKey(keyDataPoints))
var temp = d.getInteger( keyDataPoints );
if (temp >= sGridMin && temp <= sGridMax)
gGridPoints = temp;
if (d.hasKey(keyWriteICC))
gDoSaveICCProfile = d.getBoolean( keyWriteICC );
if (d.hasKey(keyWrite3DL))
gDoSave3DL = d.getBoolean( keyWrite3DL );
if (d.hasKey(keyWriteCUBE))
gDoSaveCUBE = d.getBoolean( keyWriteCUBE );
if (d.hasKey(keyWriteCSP))
gDoSaveCSP = d.getBoolean( keyWriteCSP );
function createDescriptorFromOptions()
var desc = new ActionDescriptor();
desc.putString( keyFilePath, gSaveFilePath ); // will be overridden by UI
desc.putString( keyDescription, gDescription ); // will always be overridden by document name
desc.putString( keyCopyright, gCopyright );
desc.putInteger( keyDataPoints, gGridPoints );
desc.putBoolean( keyWriteICC, gDoSaveICCProfile );
desc.putBoolean( keyWrite3DL, gDoSave3DL );
desc.putBoolean( keyWriteCUBE, gDoSaveCUBE );
desc.putBoolean( keyWriteCSP, gDoSaveCSP );
return desc;
function doExportUI()
// DEFERRED - it might be nice to be able to run without UI
// Right now we can't, but someone could modify the script if they so desire
const sDescription = localize("$$$/AdobeScript/Export3DLUT/Description=Description:");
const sCopyright = localize("$$$/AdobeScript/Export3DLUT/Copyright=Copyright:");
const sQuality = localize("$$$/AdobeScript/Export3DLUT/Quality=Quality");
const sGridPoints = localize("$$$/AdobeScript/Export3DLUT/GridPoints=Grid Points:");
const sFormatsToSave = localize("$$$/AdobeScript/Export3DLUT/Formats=Formats");
const sOpenButton = localize("$$$/JavaScripts/psx/OK=OK");
const sCancelButton = localize("$$$/JavaScripts/psx/Cancel=Cancel");
const strTextInvalidType = localize("$$$/JavaScripts/Export3DLUT/InvalidType=Invalid numeric value. Default value inserted.");
const strTextInvalidNum = localize("$$$/JavaScripts/Export3DLUT/InvalidNum=A number between 7 and 256 is required. Closest value inserted.");
const strNoExportsSelected = localize("$$$/JavaScripts/Export3DLUT/NoExportTypesSelected=No export types were selected.");
const strExportPrompt = localize("$$$/JavaScripts/Export3DLUT/ExportColorLookup=Export Color Lookup");
const strUntitledLUT = localize("$$$/JavaScripts/Export3DLUT/UntitledLUTFilename=untitled.lut");
const sSaveICC = localize("$$$/AdobeScript/Export3DLUT/ICCProfile=ICC Profile");
// these are not localized, since they refer to file format extensions
const sSave3DL = "3DL";
const sSaveCUBE = "CUBE";
const sSaveCSP = "CSP";
// strings similar to JPEG quality
const sPoor = localize("$$$/AdobeScript/Export3DLUT/Poor=Poor");
const sLow = localize("$$$/AdobeScript/Export3DLUT/Low=Low");
const sMedium = localize("$$$/AdobeScript/Export3DLUT/Medium=Medium");
const sHigh = localize("$$$/AdobeScript/Export3DLUT/High=High");
const sMaximum = localize("$$$/AdobeScript/Export3DLUT/Maximum=Maximum");
const ui = // dialog resource object
"dialog { \
orientation: 'row', \
gp: Group { \
orientation: 'column', alignment: 'fill', alignChildren: 'fill', \
description: Group { \
orientation: 'row', alignment: 'fill', alignChildren: 'fill', \
st: StaticText { text:'Description:' }, \
et: EditText { characters: 30, properties:{multiline:false}, text:'<your description here>' } \
copyright: Group { \
orientation: 'row', alignment: 'fill', alignChildren: 'fill', \
st: StaticText { text:'Copyright:' }, \
et: EditText { characters: 30, properties:{multiline:false}, text:'<your copyright here>' } \
qual: Panel { \
text: 'Quality', \
orientation: 'column', alignment: 'fill', alignChildren: 'fill', \
g2: Group { \
st: StaticText { text:'Grid Points:' }, \
et: EditText { characters:4, justify:'right' } \
drp: DropDownList {alignment:'right'} \
sl: Slider { minvalue:7, maxvalue:256, value: 32 }, \
options: Panel { \
text: 'Formats', \
orientation: 'column', alignment: 'fill', alignChildren: 'left', \
ck3DL: Checkbox { text:'3DL', value:true }, \
ckCUBE: Checkbox { text:'CUBE', value:true } \
ckCSP: Checkbox { text:'CSP', value:true } \
ckICC: Checkbox { text:'ICC Profile', value:true } \
gButtons: Group { \
orientation: 'column', alignment: 'top', alignChildren: 'fill', \
okBtn: Button { text:'Ok', properties:{name:'ok'} }, \
cancelBtn: Button { text:'Cancel', properties:{name:'cancel'} } \
const titleStr = localize("$$$/AdobeScript/Export3DLUT/DialogTitle/ExportColorLookupTables=Export Color Lookup Tables");
var win = new Window (ui, titleStr ); // new window object with UI resource
// THEORETICALLY match our dialog background color to the host application
win.graphics.backgroundColor = win.graphics.newBrush (win.graphics.BrushType.THEME_COLOR, "appDialogBackground");
// poor, low, medium, high, max
var MenuQualityToGridPoints = [ 8, 16, 32, 64, 256 ];
function GridPointsToQualityMenuIndex( num )
var menu = MenuQualityToGridPoints;
var menuItems = menu.length;
if (num <= menu[0])
return 0;
if (num >= menu[ menuItems-1 ])
return (menuItems-1);
for (var i = 0; i < (menuItems-1); ++i)
if ((num >= menu[i]) && (num < menu[i+1]))
return i;
return 0; // just in case of a logic failure
// insert our localized strings
var drop = win.gp.qual.g2.drp; // for easier typing
drop.add('item', sPoor ); // 0
drop.add('item', sLow ); // 1
drop.add('item', sMedium ); // 2
drop.add('item', sHigh ); // 3
drop.add('item', sMaximum ); // 4
drop.selection = drop.items[2]; // Medium
win.gp.description.st.text = sDescription;
win.gp.copyright.st.text = sCopyright;
win.gp.qual.text = sQuality;
win.gp.qual.g2.st.text = sGridPoints;
win.gp.options.text = sFormatsToSave;
win.gp.options.ck3DL.text = sSave3DL;
win.gp.options.ckCUBE.text = sSaveCUBE;
win.gp.options.ckCSP.text = sSaveCSP;
win.gp.options.ckICC.text = sSaveICC;
win.gButtons.okBtn.text = sOpenButton;
win.gButtons.cancelBtn.text = sCancelButton;
// set starting parameters
win.gp.description.et.text = gDescription;
win.gp.copyright.et.text = gCopyright;
win.gp.options.ckICC.value = gDoSaveICCProfile;
win.gp.options.ck3DL.value = gDoSave3DL;
win.gp.options.ckCUBE.value = gDoSaveCUBE;
win.gp.options.ckCSP.value = gDoSaveCSP;
// global flag/hack to keep the UI pretty
var gGlobalPreventChanges = false;
with (win.gp.qual)
sl.value = gGridPoints;
g2.et.text = gGridPoints;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(gGridPoints) ];
// global flag is ugly, but recursive change calls are uglier
g2.et.onChange = function () { if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var val = Number(this.text);
this.parent.parent.sl.value = val;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(val) ];
gGlobalPreventChanges = false; };
sl.onChanging = function () { if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var val = Math.floor(this.value);
this.parent.g2.et.text = val;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(val) ];
gGlobalPreventChanges = false; };
// DEFERRED - we should also set the value if the same menu item is selected again (reset)
// but the JSX toolkit doesn't support that
drop.onChange = function()
if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var theSelection = this.selection.text;
if (theSelection != null) { // only change if selection made
var theSelectionIndex = this.selection.index;
var newGridPoints = MenuQualityToGridPoints[ theSelectionIndex ];
win.gp.qual.g2.et.text = newGridPoints;
win.gp.qual.sl.value = newGridPoints;
gGlobalPreventChanges = false;
win.onShow = function ()
this.qual.sl.size.width = 128;
this.layout.layout(true);
win.gButtons.cancelBtn.onClick = function () { this.window.close(2); };
// validate inputs when the user hits OK
var gInAlert = false;
win.gButtons.okBtn.onClick = function ()
if (gInAlert == true)
gInAlert = false;
return;
var gridText = win.gp.qual.g2.et.text;
var w = Number(gridText);
var inputErr = false;
if ( isNaN( w ) )
if ( DialogModes.NO != app.playbackDisplayDialogs )
gInAlert = true;
alert( strTextInvalidType );
gInAlert = false;
win.gp.qual.g2.et.text = sGridDefault;
win.gp.qual.sl.value = sGridDefault;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridDefault) ];
return false;
if ( (w < sGridMin) || (w > sGridMax) )
if ( DialogModes.NO != app.playbackDisplayDialogs )
gInAlert = true;
alert( strTextInvalidNum );
gInAlert = false;
if ( w < sGridMin)
inputErr = true;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridMin) ];
win.gp.qual.g2.et.text = sGridMin;
win.gp.qual.sl.value = sGridMin;
return false;
if ( w > sGridMax)
inputErr = true;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridMax) ];
win.gp.qual.g2.et.text = sGridMax;
win.gp.qual.sl.value = sGridMax;
return false;
if (inputErr == false)
win.close(true);
return;
win.center(); // move to center the dialog
var ret = win.show(); // dialog display
if (2 == ret)
return false; // user cancelled
// user hit OK, copy values from dialog
gDescription = win.gp.description.et.text;
gCopyright = win.gp.copyright.et.text;
gGridPoints = win.gp.qual.sl.value;
gDoSave3DL = win.gp.options.ck3DL.value;
gDoSaveCUBE = win.gp.options.ckCUBE.value;
gDoSaveCSP = win.gp.options.ckCSP.value;
gDoSaveICCProfile = win.gp.options.ckICC.value;
// if no files are going to be saved, then we have zero work to do
if ((false == gDoSaveICCProfile) && (false == gDoSave3DL) &&
(false == gDoSaveCUBE) && (false == gDoSaveCSP) )
// tell the user that no formats were selected
alert( strNoExportsSelected );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
// prompt user for directory and output base filename
// default to directory and filename of current document
var currentDocumentPath
try
// if the file has no path (not saved), then this throws
var documentPath = app.activeDocument.fullName.fsName; // Get the OS friendly file path and name
documentPath = documentPath.replace(/\....$/,''); // remove extension, if there is one
documentPath = documentPath + ".lut"; // add dummy extension
currentDocumentPath = File ( documentPath );
catch (e)
// if there was no document path, default to user's home directory
var defaultName = "~/" + strUntitledLUT;
currentDocumentPath = File(defaultName);
var fname = currentDocumentPath.saveDlg(strExportPrompt);
if (fname == null)
return false;
gSaveFilePath = fname.fsName;
return true;
function doExportLUTs( path )
const keyUsing = charIDToTypeID( 'Usng' );
const eventExport = charIDToTypeID( 'Expr' );
var desc = new ActionDescriptor();
var desc2 = new ActionDescriptor();
desc2.putString( keyFilePath, path );
desc2.putString( keyDescription, gDescription );
desc2.putInteger( keyDataPoints, gGridPoints );
// assemble the full copyright string, if needed
var copyrightAssembled = gCopyright;
if (gCopyright != "")
var theDate = new Date();
// the year is from 1900 ????
var theYear = (theDate.getYear() + 1900).toString();
// Localization team says to just use the year
var dateString = theYear;
copyrightAssembled = localize("$$$/JavaScripts/Export3DLUT/Copyright=(C) Copyright ") + dateString + " " + gCopyright;
desc2.putString( keyCopyright, copyrightAssembled );
// select output format
desc2.putBoolean( keyWriteICC, gDoSaveICCProfile );
desc2.putBoolean( keyWrite3DL, gDoSave3DL );
desc2.putBoolean( keyWriteCUBE, gDoSaveCUBE );
desc2.putBoolean( keyWriteCSP, gDoSaveCSP );
desc.putObject( keyUsing, keyExportLUT, desc2 );
try
var resultDesc = executeAction( eventExport, desc, DialogModes.NO );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/ExportLUTFailed=Unable to run the Export Color Lookup plugin because ");
alert( str + e + " : " + e.line );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
return true;
function doRenderGrid( points )
// call the grid rendering plugin to do the work
const keyRenderGrid = charIDToTypeID( "3grd" );
const keyDataPoints2 = charIDToTypeID( 'grdP' );
var args = new ActionDescriptor();
args.putInteger( keyDataPoints2, points);
try
var result = executeAction( keyRenderGrid, args, DialogModes.NO );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/RenderGridFailed=Unable to render color grid because ");
alert( str + e + " : " + e.line );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
return true;
function resizeDocumentInPixels( width, height )
var myDocument = app.activeDocument;
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
myDocument.resizeCanvas( width, height, AnchorPosition.MIDDLECENTER)
app.preferences.rulerUnits = originalRulerUnits;
function GetColorSettings()
var desc1 = new ActionDescriptor();
var ref1 = new ActionReference();
ref1.putProperty( classProperty, kcolorSettingsStr );
ref1.putEnumerated( classApplication, typeOrdinal, enumTarget );
desc1.putReference( typeNULL, ref1 );
var result = executeAction( eventGet, desc1, DialogModes.NO );
var desc2 = result.getObjectValue( kcolorSettingsStr );
return desc2;
function GetColorConversionDitherState()
var settings = GetColorSettings();
if (settings.hasKey(kDither))
return settings.getBoolean( kDither );
else
return null;
function ConvertTo16Bit()
const eventConvertMode = charIDToTypeID( 'CnvM' );
const keyDepth = charIDToTypeID( 'Dpth' );
var modeDesc16Bit = new ActionDescriptor();
modeDesc16Bit.putInteger( keyDepth, 16 );
var result = executeAction( eventConvertMode, modeDesc16Bit, DialogModes.NO );
// state = true or false
function SetColorConversionDither( state )
var desc1 = new ActionDescriptor();
var ref1 = new ActionReference();
ref1.putProperty( classProperty, kcolorSettingsStr );
ref1.putEnumerated( classApplication, typeOrdinal, enumTarget );
desc1.putReference( typeNULL, ref1 );
var desc2 = new ActionDescriptor();
desc2.putBoolean( kDither, state );
desc1.putObject( keyTo, kcolorSettingsStr, desc2 );
executeAction( eventSet, desc1, DialogModes.NO );
function PurgeClipboard()
var desc1 = new ActionDescriptor();
desc1.putEnumerated( typeNULL, typePurgeItem, enumClipboard );
var result = executeAction( eventPurge, desc1, DialogModes.NO );
// This helps us avoid resizing existing document views in tabbed document mode.
// This is new functionality, and will not work in older Photoshop versions.
function MoveDocumentToNewWindow()
var desc1 = new ActionDescriptor();
var result = executeAction( kFloatWindowStr, desc1, DialogModes.NO );
function main()
try
var tempDoc = null;
var tempDoc2 = null;
// do basic troubleshooting first
// make sure there is a document
if (!app.activeDocument)
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// check the document mode
var mode = app.activeDocument.mode;
if (mode != DocumentMode.RGB
&& mode != DocumentMode.LAB
&& mode != DocumentMode.CMYK)
var str = localize("$$$/JavaScripts/Export3DLUT/UnsupportedColorMode=Could not export Color Lookup Tables because only RGB, LAB, and CMYK color modes are supported.");
alert(str);
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// check the document depth, for safety
var depth = app.activeDocument.bitsPerChannel; // an object, not a number - why? I have no idea...
var bitsPerChannel = 1;
if (depth == BitsPerChannelType.EIGHT)
bitsPerChannel = 8;
else if (depth == BitsPerChannelType.SIXTEEN)
bitsPerChannel = 16;
else if (depth == BitsPerChannelType.THIRTYTWO)
bitsPerChannel = 32;
else
var str = localize("$$$/JavaScripts/Export3DLUT/UnsupportedImageDepth=Could not export Color Lookup Tables because only 8, 16, and 32 bits/channel are supported.");
alert(str);
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// Check layer types: background plus adjustments only
// For now, don't check each layer - a multiply solid layer still works as a color adjustment, as does selective blending
// Users will get odd results from other layer types (layer masks, pixel layers, etc.)
try
app.activeDocument.backgroundLayer.visible = true;
catch (e)
if (activeDocument.layers.length == 1)
alert( localize("$$$/JavaScripts/Export3DLUT/NoAdjustmentLayers=Could not export Color Lookup Tables because this document has no adjustment layers.") );
else
alert( localize("$$$/JavaScripts/Export3DLUT/NoBackground=Could not export Color Lookup Tables because this document has no background.") );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// look for last used params via Photoshop registry, getCustomOptions will throw if none exist
try
var desc = app.getCustomOptions(kScriptOptionsKey);
readOptionsFromDescriptor( desc );
catch(e)
// it's ok if we don't have any existing options, continue with defaults
// set some values from the document
gDescription = app.activeDocument.name;
// ask the user for options, bail if they cancel at any point
if ( doExportUI() == false)
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// we're good to go, so save our parameters for next time
app.putCustomOptions(kScriptOptionsKey, createDescriptorFromOptions() );
// remove file extension from filePath, if there is one
gSaveFilePath = gSaveFilePath.replace(/\....$/,'');
// calculate the size of image we need
var width = gGridPoints * gGridPoints;
var height = gGridPoints;
if (mode == DocumentMode.CMYK)
height = gGridPoints*gGridPoints;
// duplicate the user document so we don't mess it up in any way
tempDoc = app.activeDocument.duplicate("temporary");
// make the temporary document active
app.activeDocument.name = tempDoc;
// to avoid resizing existing document views in tabbed mode
MoveDocumentToNewWindow();
// convert 8 bit documents to 16 bit/channel for improved quality of merged adjustments
if (bitsPerChannel == 8)
ConvertTo16Bit();
depth = BitsPerChannelType.SIXTEEN;
// resize the temporary canvas to our target size
resizeDocumentInPixels( width, height )
// select background layer
tempDoc.activeLayer = tempDoc.backgroundLayer;
// render lookup base grid
var worked = doRenderGrid( gGridPoints );
if (worked != true)
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
return; // error should have already been shown, and there is not much we can do
// do not flatten here -- the export automatically gets flattened data
// and we may need layers for LAB->RGB conversion below
// export the chosen formats
worked = doExportLUTs( gSaveFilePath );
if (worked != true)
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
return; // error should have already been shown, and there is not much we can do
// for LAB documents to export 3DLUT (which are inherently RGB), we have to do additional work
// As a bonus, this works for CMYK as well!
if ( mode != DocumentMode.RGB )
var filePath = gSaveFilePath + "RGB";
var oldDitherState = GetColorConversionDitherState();
try
SetColorConversionDither(false);
const targetProfileName = "sRGB IEC61966-2.1";
// new document temp2 in sRGB, matching depth of original
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
tempDoc2 = app.documents.add( width, gGridPoints, 72, "temp2",
NewDocumentMode.RGB, DocumentFill.WHITE,
1.0, depth, targetProfileName );
app.preferences.rulerUnits = originalRulerUnits;
// make the new doc active
app.activeDocument.name = tempDoc2;
// to avoid resizing existing document views in tabbed mode
MoveDocumentToNewWindow();
// insert grid
worked = doRenderGrid( gGridPoints );
if (worked == true)
tempDoc2.selection.selectAll();
tempDoc2.activeLayer = tempDoc2.backgroundLayer;
tempDoc2.selection.copy();
tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
tempDoc2 = null;
// make sure temp1 is active
app.activeDocument.name = tempDoc;
// resize for RGB grid
resizeDocumentInPixels( width, gGridPoints );
tempDoc.selection.selectAll();
tempDoc.paste(true);
PurgeClipboard(); // so we don't leave an odd, large item on the clipboard
tempDoc.selection.deselect();
tempDoc.flatten();
// convert temp1 to sRGB
tempDoc.convertProfile( targetProfileName, Intent.RELATIVECOLORIMETRIC, true, false );
// export the chosen formats
worked = doExportLUTs( filePath );
// at this point we still have to clean up, even if the call failed, so fall through
else
tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/UnableToConvertRGB=Unable to convert image to RGB because ");
alert( str + e + " : " + e.line );
if (tempDoc2 != null) tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
// always reset the dither state
SetColorConversionDither( oldDitherState );
PurgeClipboard(); // so we don't leave an odd, large item on the clipboard
} // if not RGB
// always close temp document without saving
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/UnableToExport=Unable to export LUT because ");
alert( str + e + " : " + e.line );
// always close temp document without saving
if (tempDoc != null) tempDoc.close( SaveOptions.DONOTSAVECHANGES );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our scriptHi blabla12345,
(untested and without warranty)
replace this line:
const sSaveCUBE = "CUBE";
with this:
const sSaveCUBE = "cube";
Have fun -
When I download an attachment, it doesn't open in a new window. It goes to my finder, but I must click on an email attachment at least 3 times in order to find it there. Is there a way to change the preferences to simply open attachment in a new window?
http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback -
I recently updated to 10.8.2 and now my notes from my iphone no longer appear in my mail nor do my calender appointments. Is there any way to change it so they will appear?
If it has the same (bad) behavior on two different systems then there is a very good chance that the drive is toast.
BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
regards -
Is there a way of changing the jdevappunknown_ folder that Ant deploys to?
Using Ant DeployESBSuitcase doesn't work when deploying Projects with dependencies.
Steps to re-create error:
Create a JDeveloper ESB Project called ‘ProjectB’ and add file adapter called ‘WriteFile’ to write a file. Deploy this project using JDeveloper.
Create another JDeveloper ESB Project called ‘ProjectA’ and add a file adapter called ‘ReadFile’ to read a file.
From ProjectA’s routing service add a routing rule and use ‘Browse Target Service Operation’ (Gear wheel icon) and select the deployed ProjectB_WriteFile service.
Deploy ProjectA using JDeveloper.
Use Ant to create a deploymentplan file for both projects by running the ExtractESBDeploymentPlan target.
Note: As these projects are saved under their own directory structure
C:\Workspace\Local\ProjectA and C:\Workspace\Local\ProjectB you will need to copy the ..\ProjectB\ProjectB_WriteFile.wsdl to the ProjectA folder.
Confirm that ProjectA and ProjectB Ant build files DeployESBSuitcase properties (esbMetadataServerHost and esbMetaServerPort) point to another server other than the one you have just deployed ProjectA and ProjectB to using JDeveloper. i.e. a clean server that doesn’t know about these Projects
Deploy ProjectB using Ant’s DeployESBSuitcase target.
Deploy ProjectA using Ant’s DeployESBSuitcase target.
An error is now thrown
C:\Workspace\Local\ProjectA>ant DeployESBSuitcase
Buildfile: build.xml
DeployESBSuitcase:
[echo] Deploying ESB Project ProjectA to serverx
[deployESBSuitcase] Deployment Attempt Response :
[deployESBSuitcase] <deploymentSummary>
[deployESBSuitcase] <message>Entity Deployment Failed</message>
[deployESBSuitcase] <errors>
[deployESBSuitcase] <error code="1049" severity="5">
[deployESBSuitcase] <description>WSDL "esb:///ESB_Projects/Local_ProjectB/ProjectB_WriteFile.wsdl" of service "DefaultSystem.ProjectB_WriteFile" is invalid or unaccessible. Following error is thrown by WSDL Parser : WSDL Parsing Failed: org.apache.slide.structure.ObjectNotFoundException: No object found at /files/ESB_Projects/Local_ProjectB</description>
[deployESBSuitcase] <fix>Ensure that the WSDL is accessible and valid. If the problem persists, Contact Oracle Support.</fix>
[deployESBSuitcase] </error>
[deployESBSuitcase] </errors>
[deployESBSuitcase] </deploymentSummary>
[deployESBSuitcase]
[deployESBSuitcase] Deployment Failed ...Unhandled Exception
[deployESBSuitcase] java.lang.Exception: Deployment attempt failed, please review deployment attempt response above
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:128)
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:175)
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeployESBSuitcaseTask.execute(DeployESBSuitcaseTask.java:510)
[deployESBSuitcase] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[deployESBSuitcase] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[deployESBSuitcase] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[deployESBSuitcase] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[deployESBSuitcase] at java.lang.reflect.Method.invoke(Method.java:585)
[deployESBSuitcase] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
[deployESBSuitcase] at org.apache.tools.ant.Task.perform(Task.java:348)
[deployESBSuitcase] at org.apache.tools.ant.Target.execute(Target.java:357)
[deployESBSuitcase] at org.apache.tools.ant.Target.performTasks(Target.java:385)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[deployESBSuitcase] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
[deployESBSuitcase] at org.apache.tools.ant.Main.runBuild(Main.java:758)
[deployESBSuitcase] at org.apache.tools.ant.Main.startAnt(Main.java:217)
[deployESBSuitcase] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[deployESBSuitcase] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
BUILD FAILED
java.lang.Exception: Deployment attempt failed, please review deployment attempt response above
at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:128)
at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:175)
at oracle.tip.esb.client.anttasks.DeployESBSuitcaseTask.execute(DeployESBSuitcaseTask.java:510)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Total time: 2 seconds
C:\Workspace\Local\ProjectA>
This error is thrown as ProjectB’s wsdl file cannot be found under esb:///ESB_Projects/Local_ProjectB/ProjectB_WriteFile.wsdl.
This is due to Ant deploying ProjectB under …\ESB_Projects\jdevappunknown_ rather than …\ESB_Projects\Local_ProjectB
When deploying ESB projects from JDeveloper they are created under the following structure: <Oracle_Home>\integration\esb\oraesb\artifacts\store\metadata\files\ESB_Projects\<JDev_Workspace>\<Project_Name>
However when using the Ant target DeployESBSuitcase ALL projects are deployed to the same folder:
<Oracle_Home>\integration\esb\oraesb\artifacts\store\metadata\files\ESB_Projects\jdevappunknown_
Is there a way of changing the jdevappunknown folder used by Ant deployments?
Edited by: user2000 on Apr 27, 2009 3:37 PMJames,
Following my steps above I don't get anything in the deploymentPlan for either ProjectA or ProjectB which includes a WSDL URL I can modify.
ProjectA includes the ProjectB_WrieFile.esbsv file which contains the following line:
<wsdlURL>esb:///ESB_Projects/Local_ProjectB/ProjectB_Write.wsdl</wsdlURL>
Is there something I can change which will mean when I regenerate the deploymentPlan it will include the WSDL location?
Thanks
Alistair
Edited by: user2000 on Apr 28, 2009 11:55 AM
I've included Both Deployment Plans:
ProjectA Deployment Plan
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<deploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectA_ReadFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Read" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.inbound.FileActivationSpec" name="ActivationSpec"/>
<property value="Archive" name="LogicalArchiveDirectory"/>
<property value="true" name="DeleteFile"/>
<property value=".*\.txt" name="IncludeFiles"/>
<property value="60" name="PollingFrequency"/>
<property value="0" name="MinimumAge"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
<property value="*.txt" name="UIincludeWildcard"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectA_ReadFile_RS" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<serviceDefinition>
<property value="ProjectA_ReadFile.wsdl" name="wsdlURL"/>
</serviceDefinition>
</properties>
</serviceDeploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectB_WriteFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Write" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.outbound.FileInteractionSpec" name="InteractionSpec"/>
<property value="ProjectB_%SEQ%.txt" name="FileNamingConvention"/>
<property value="1" name="NumberMessages"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
</deploymentPlan>
Project B Deployment Plan
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<deploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectB_WriteFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Write" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.outbound.FileInteractionSpec" name="InteractionSpec"/>
<property value="ProjectB_%SEQ%.txt" name="FileNamingConvention"/>
<property value="1" name="NumberMessages"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
</deploymentPlan> -
Is there a way to change the message received in Outlook from Mavericks calender?
Hi there
I found a post discussing this whereby a user was advised to edit the ITIP.stings file in the contents of the iCal.app to change the standard message that states "To accept or decline this invitation, click the link below" etc message that an Outlook user received when getting a calender invite from Mavericks Calender.
The post is here:
Is there a way to change the standard email message?
Problem is, on Mavericks it does not have that string in that file - I've actually checked ALL the .strings files in that folder but to no avail. Did it move somewhere else on Mavericks?
On another note...this whole process is part in part moving from Entourage to Mac Mail and Calender due to Apple's (illogical) removal of the ability to sync with anything other than iCal / Mail / iCloud. So we manually moved everything across (thousands of mails and hundreds of folders) and hundreds and hundreds of calender events.
Now it syncing but herewith the problem...if I create an event and send it to someone, they receive it as the iCloud account email and not our work email (pop account with our own domain). Even then when I open it in Outlook, it has some horribly malformed address and when you accept, you get a delivery failure.
So we create a different Calender (On the Mac) and this sends 100% (except for the message in the body we'd like to change) but this does not sync with the Iphone or the iPad. Then we have to manually change the calender event to the iCloud calender and it brings up a message that its going to send the update to all the attendees...and you must choose between send via mail or send via server.
What do I do!?Anyone? Just need to know where I can change that message and also how I can set up the icloud calender to send invites using my work email address (as configured in Mail)?
-
Is there a way to change the icon associated with icloud account?
Is there a way to change the icon associated with my iCloud account? It's currently a rose and i do not like it.
Welcome to the Apple Support Communities
Are you referring to your iCloud account picture or your user picture?
It looks like you are referring to your user picture. To change it, open System Preferences > Users & Groups, press the picture box and choose the user picture you want from the ones that came by default. If you want to select a different picture stored on your Mac, drag that photo onto the picture box.
If you want to change your iCloud account picture, open http://www.icloud.com and log in with your Apple ID. Then, press your name at the top right of the site and press the user picture. If you put the cursor on the picture box, you will see a button at the top of the box to change your picture -
Is there a way to Change the Writing Speed When Burning CD-R's?
Is there a way to change the writing speed when burning CD-R's?
I don't see any options in Disk Utility.
Rob
P.S. Since I am burning coasters lately with the Pioneer DVR-111D, I though that I might solve the problem by using a lower write speed.I dn't believe so with Disk Utility although you can with Roxio Toast Titanium. I would try another media brand, like Verbatim, as a first step and see if the coaster problem goes away.
Maybe you are looking for
-
How to insert an address in pages 5.1
Before I update to pages 5.1 I could insert an address. I was able to make a automatic form where I could insert name company or adress and it would automaticaly change everywhere. Is this still possible? Thans
-
How can I get the peak and valley of a MZI signal
I am using MZI signal which is similar to sine wave with frequency of 10MHz to calibrate an interference signal. I want to get the peak and valley of the MZI signal and get the corresponding value of interference signal at the same location. The prob
-
Why can't I see the "Store" menu in iTunes?
I'm trying to authorize my computer but I can't see the menu items the Apple Support site is telling me I have to click.
-
I downloaded the Office Pro 2013 trial but when I go to install it it is just am image file and asks me to install Nero - what I am missing here?
-
I'm shooting with a Sony NEX-5. Is ACR 6.2 Beta available for download yet? Brian Smith