Is there a way to change opacity keyframe without changing the scrolling keyframe?

I'm looking at the scroll effects for Adobe Muse. It's somewhat counter-intuitive but handy enough. However, there are some problems with positioning or keyframing.
For instance, Let's say that I have an element containing a logo that I want to be visible as soon as the page loads. As the page is scrolled I want that element to hold a fixed position for a certain amount of time (or, rather, distance scrolled) and then begin to fade out from that point.
The sensible way to do this would seem to be to set a start point for my graphic then set its motion to static and then set an end point/position, if required.
I would then set my opacity to start at 100% at the top of the page, another key point further down the screen at which the fade would start, and a final point at which the fade is complete.
To my mind we should have six independent key frames/positions - a start position, a mid point (which corresponds to the current end point), and an end point for the motion and the same for the Opacity
As it stands Muse sets a Key Position (key frame) for the end of any motion and extrapolates the start position from that Key Point and the desired scroll speed. Unfortunately the Key Position is also tied to the Key Position for the opacity and vice versa.
This makes the above scenario all but impossible to achieve since you either have to start the fade immediately from the top of the screen (since that is necessarily the point at which you have to make your graphic visible) or change the graphic motion to start from where you want the opacity to change. Either way the graphic then arbitrarily decides where its start position will be.
Given that Muse is aimed at non-coding designers who wish to make websites, and given the notoriously pixel-perfect-persnicketiness of said designers, surely this nebulous, toss-it-all-up-in-the-air-and-see-where-it-lands approach to positioning is tantamount to mental torture?
Or am I missing something? Is there a way to set these key frames/positions separately? Even in the generated code?

just a bump

Similar Messages

I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

You can't "accidentally" put a passcode on any iPhone...its a multi-step process. Further, restoring an iPhone will remove the passcode, as the passcode is not included in an iPhone backup.
Are you sure you're talking about the phone passcode & not something else...like the "Restrictions" passcode?

With just ONE inatentive sweep of my finger one page of my note was disappeared! Is there any way it can be recovered without using the help of iCloud backup?

1. With just ONE inattentive sweep of my finger one page of my note disappered. Further more, the same page in my iPad was deleted automatically too! How could this happen? Is there any way it can be recovered without using the backup feature from iCloud? The data is vey important to me?
2. I havn't connect the power code to my iPad yet, the backup copy in the iClout was before the accident as I checked in iPad. Is there any way that I could open my notes in iCloud backup so that I can copy the missing page and move back to my iPad and iPhone?
Thanks a lot for any help!
Xueyu

Sorry, no. The only way to restore this note is to restore from a backup that contains it.

Ive made a gamecenter account thats not connected to my apple id but i have one that is. is there a way i can tranfer account without changing account which will make me lose all of my achivments on gamecenter?

Basicly ive made and gamecenter account connected to my apple id and i forgot the password so i made a new not connected to it and ive just realised so is there a way i can transfer my account now to my old account moving all my achivemets and points.
If anyone could help me please do
thanks

No, you cannot transfer Game Center data from one account to another.
Regards.

Is there any way to check rc.conf without restarting the machine?

Hi everybody,
I've VPS running with Arch. It was preinstalled with very, very old versiol so I've upgraded everything, updated rc.conf by hand but still never restarted completely. So my question is - is there any way to check that the server will boot up without issues? Is there any way to check that rc.conf is completely valid?

peets, thanks! It seems to be ok at this point.
tomk, understood... Well, I'll paste it here maybe somebody could look throught for some possible incompability problems from old version:
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Vilnius"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
MOD_BLACKLIST=()
MODULES=()
USELVM="no"
HOSTNAME="server"
DAEMONS=(syslog-ng network netfs crond sshd nginx mysqld @postfix php-fpm @svnse
rve @pure-ftpd)
lo="lo 127.0.0.1"
INTERFACES=( "lo" "venet0" "venet0_0" )
venet0="venet0 127.0.0.1 netmask 255.255.255.255 broadcast 0.0.0.0"
rt_venet0="-net 191.255.255.1 netmask 255.255.255.255 dev venet0"
rt_default="default gw 191.255.255.1"
ROUTES=( "rt_venet0" "rt_default" )
venet0_0="venet0:0 79.98.27.163 netmask 255.255.255.255 broadcast 0.0.0.0"
The most important is to bring networking up after restart :-) last lines from "lo=..." is from old rc.conf so I'm not sure if this is compatible with newest Arch.
Thank you for help, guys!
Last edited by InfernalH (2009-06-13 15:24:37)

Hey guys I got a used iBook from a family friend who had it password protected and he doesn't remember the password.Is there a way to get around this without wiping the computer?I don't have any of software discs and can't update or delete anything.Thanx

Hey guys I got a used iBook from a family friend that has it password protected.I can't update or delete programs or download anything without the passwords and he doesn't remember them.Is there any way for me to get around these without wiping the computer and starting from scratch?

Hello,
Sadly without the system disk you can't do a lot. I would suggest you enable root user, log in as root and reset your administrators password, however you can't without knowing the administrator password first.
The only solution would be is to obtain the correct system disk or buy a retail copy of Mac OS X. But note, it depends on what version of the iBook you own depends, on what version of Mac OS X you will require.
You can still obtain the system disk or retail disks from online vendors, but they come at a cost.
System disk are grey in color, while retail disk have a big 'X' on it.
Best of luck

Is there any way to send an album without all the photos attaching and the file being huge? and the file being huge?

Is there any way to send just a link to an album? (vs attaching everything and having a huge file?) Thanks!

No.
File -> Export and send them to a Folder on the desktop. Then do what you will with them from there.
There is nothing to be gained by installing Picasa if you're using iPhoto.
Regards
TD

Is there any way to listen to music WITHOUT using the speakerphone or headphones?

I listen to streaming talk radio in my car, I usually have drive to and walk in and out of several office buildings throughout my day. I would like to be able to just put my BB up to my ear and pretend like I am listening to someone talk on the phone, when I'm really listening to the radio. Is there any way to do this? I hate having to fumble around with headsets every time I stop, and obviously I cant walk through a office building with the loud speakerphone/built in speaker blasting.

Sure there is.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

If my MacBook won't start, is there a way to access my data without replacing the battery? Someone mentioned removing the hard drive?

I'm assuming that my MacBook won't start because it's been spilled on... It's happened once before and when I brought it in, all that was needed was a battery replacement. I have a brand new MacBook Pro and all I really want is my pictures, videos, music & other documents from my old MacBook.. Is there a way of getting all of that without buying a new battery, and then using Mavericks to switch over everything? A friend suggested that I just get all of it from the hard drive, but I don't really know much about that. Help?

If you can take the computer to somewhere or someone who has a known-good battery, and if the MacBook is dry, you could tell in quick order if a replacement battery would be worth it. Likely, you won't have been as fortunate more than once; electricity and water don't mix well, and short circuited or fried electronics result.
{There used to be a way to access one Mac from another if you could get the bad one to boot into Target Disk mode, but Intel-based macs didn't always work; they both needed FireWire ports & correct cable. If In an enclosure, you may be able to use a migration assistant utility.}
An authorized service tech with Apple certification in portable computers should be able to remove the internal hard disk drive, install it into an external enclosure, & test it, for a fee; once in an enclosure it may be accessed to see if the hard drive's data files on the drive, or at least sees them. Labor + parts?
Once the hard disk drive is removed, your user files would still have whatever account password protection needed to access them, but there are ways to migrate data from drives into another computer; in some cases the information on this may be tilted toward using a device you don't have, such as a Time Machine. If the data had been backed up on a Time Machine, it may have been possible to get it from that device using a method available in a Support article and put directly into another Mac.
If the computer has failed due to contact with moisture or a drink pouring over it, more than once, it may require more than a new battery to see if it'd work well enough to run and get data from its hard disk drive. You may pay quite a bit of money to have someone do anything at all.
How long ago did the MacBook get wet again? If several weeks ago, it may be dry inside. But may be damaged and the main logic board short-circuited or toast. So, it may not work even with the MagSafe attached due to other damages beyond a new battery. That could be a waste of money to buy one.
There are repair guides at http://ifixit.com which may help you determine if you can extract the HDD from the failed MacBook, but even then you'd have to install it into a suitable USB enclosure to gain access to data. Some drive enclosures already have a hard disk drive inside, so try and get one that would work with the MacBook's SATA hard disk drive, and with no HDD installed. One less thing to do.
So I know only enough about it to be dangerous.
And to troubleshoot the old MacBook may not
be worth the cost, if logicboard now is toasted.
Maybe someone else can say it direct w/ less words? LOL
Good luck & happy computing!

Is there a way to hang up call without using the touchscreen?

I'm using an HP Veer 4G. In the wintertime, when I need to wear gloves, I'm wondering how I will handle calls without using the touchscreen.
I've figured out most of the process: hold down the volume down button for a couple of seconds to load the Voice Dial app, then speak the name of the person I want (which has worked flawlessly for me so far!) and then I'm connected.
The problem I'm having is how to hang up without using the touchscreen. If someone answers the call, that's no problem because I can just wait for them to hang up. But if I get their voicemail then what? I thought I'd be clever and use my nose, but the sensors black the screen out so that doesn't work. How are people ending calls without taking their gloves off?
Post relates to: HP Veer p160una (AT&T)

Hello!
Unfortunately this is the trade with using capacitive touchscreen
HP has logged this in its software issue tracking system. We endeavor to continuously improve our software quality and thank you for bringing this to our attention. We are grateful to the community and will evaluate options based on customer feedback and software best practices.
In mean time, there is a patch in the homebrew community that allows closing the slider to drop calls and can check more into that via precentral.net

Is there any way to restart an iPod without hitting the buttons?

Yeah...since my iPod is stuck on permanent lock, and I've tried everything the site gives me, I never came across a way to restart the iPod without having to hit the Select and Menu buttons. Is there?

It does show up in iTunes and I have restored it...both have proven unsuccessful. I've tried toggling the Hold button, and it's not on Screen Lock, just on Hold Lock.

Is there any way to turn off airport without removing the electrical plug and should I unplug it when not using it??

I just got the 5G Airport Extreme base station. Set-up was a snap! Maybe 10-15 minutes compared to a friend who got another name brand for his pc and took a couple hours, even having to call customer support! Been working great so far, but am concerned about never turning it off, not only about the possibe harm that could be done to the unit, but also about having an active, open Internet connection 24/7. Before I got my Airport Extreme I was using Ethernet cable with a cable modem that could be placed on "standby" whenever I was not using my Mac for Internet, but since AE5G doesn't have a power switch on the unit, have left it turned on rather than unplugging it by the electrical cord. I did turn AirPort "off" in the menu bar when not using it wth my Mac, but AE is still apparently constantly active, showing a steady green light. Would there be any harm done by plugging it in only when I want to use Wi-Fi, then unplugging it?
Thanks for the help!

Would there be any harm done by plugging it in only when I want to use Wi-Fi, then unplugging it?
That is a matter of debate, since there are two schools of thought regarding power status on a router.
One school maintains that you can turn the device on and off as needed. Makes sense for some folks. The advantage of this is that it might save a bit of electricity, although the Extreme draws very little power most of the time.
Another school believes that there is a reason why Apple did not even place an "Off" switch on the device. It's designed to run 24/7.
Leaving the Extreme on will place far less stress on the electrical components in the device since they stay in an "idle" state most of the time, drawing very little current. Powering any electrical device up sends a sudden rush of current through the device, which places far more stress on a device than if it is simply left on.
It depends on your priorities. If you want to save electricity, your decision is already made. If you intend to prolong the life of the router, then consider leaving it on, as Apple intended.
A compromise position might be to leave the Extreme on most of the time and power if off for long weekends or vacation periods when you will be away. Remember that the Extreme must establish all new network connections every time that it powers back up....perhaps another reason to simply leave it on.

HT201412 Is there a way to reboot an ipod without using the home button?

My iPod touch 4th gen is unresponsive and needs a reboot, however the home button doesn't work. How can I reboot it without using the home button?

To reset the iPod without the hardware buttons,
- Reset network settings: Settings>General>Reset>Reset Network Settings. You will have to rejoin wifi networks and repair BT devices

If I backed up an old iphone that broke, is there a way to restore that stuff without erasing the content that's already on my new phone? And if I were to back up the content on my new phone would that erase what was backed up from the old device?

Some quick and important questions about icloud that I can't find on the internet

It sounds like you restored the backup of your old phone to your new phone.
Unless you backed up the new phone first or manually copied the pictures off prior to restoring the backup, the pictures are gone.

I have forgotten my password on my ipod touch 4th generation is there a way i can unlock it without the password?

i hve forgotten my password on my ipod 4th generation is there a way i can unlock it without entering the password?

Welcome to Apple Communities
You can't disable FaceTime remotely. If you activated Find my iPhone in the device, go to iCloud and Find my iPhone. You can block or erase your iPod if it's connected to Wi-Fi, but you won't be able to track it

Is there a way to have hardware acceleration without the text font change? + Eye straining firefox!

Is there a way to have hardware acceleration without the text font change? I remember there was a way to go into settings before and getting hardware acceleration to work without the font change. Unfortunately I lost ALL my previous setting when uninstalling the beta ver Nightly and clicking delete settings :(.
Also, I fixed a problem before where firefox was visually eye straining to me, I think it was some settings in anti-alias tuner, but I cant seem to find the right settings that puts less strain on my eyes, anyone know? Thanks ahead. Currently using FF7.

Try to toggle some Boolean gfx.font_rendering prefs on the about:config page to disable some features.<br />
Filter: gfx
Others to try:
* set gfx.direct2d.disabled to true to disable Direct2D
*Anti-Aliasing Tuner: https://addons.mozilla.org/firefox/addon/anti-aliasing-tuner/

Is there a way to change opacity keyframe without changing the scrolling keyframe?

Similar Messages

Maybe you are looking for