Is there a way to change the phone number in Messages and FaceTime?

I have scoured these forums and cannot find a straight answer to this.
Here is the scoop. I switched networks with my iPhone 5, so I bought a SIM for it. I then had my old number switched to it. However, in FaceTime and Messages it still displays the original number for the SiM. Is there any way to change this number to the correct one?
Also, I have two Apple ID's to two different email addresses. One for business and one for personal. Is there a way to use them both for Messages and FaceTime? I try to add the address and it shows a 'sent verification email' but I never receive it.
Thanks for your help

Hi, Steve.
Regarding the iMessage phone number, when you connect your iPhone to iTunes, which number is displayed? Have you tried disabling and re-enabling both iMessage and FaceTime?
About your two iCloud accounts, do you have both configured on your phone as two separate accounts?
Cheers.
JP

Similar Messages

How can I change the phone number for messaging and FaceTime?

How can I change the phone number for messaging and FaceTime?

Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Text on the iPad
http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

How do I change the phone number for IM and FaceTime?

Since my update to IOS 6 my FaceTime and IM are using my wife's phone number and I can't change it to mine. The email address are editable but the phone number is not. Help?

All of my devises are updated to iOS6. But after reading your reply I tried turning off iM and face time in all three devices, powered them all down for 10 minutes. I turned my phone back on first (the one I wanted associated with my iPad) then turned on my iPad. I turned on iM and face time on my phone, then the iPad. In came up with all my info including my (correct number) phone number. Then I turned on my wife's phone and turned her iM and FaceTime on. Her number also popped up in the iPad but I could choose what number I wanted to use and left hers off. Her phone number is associated with my iTunes acc because we share all of our music and apps. For a little privacy you'll have to make a separate iTunes acc to completely get the unwanted number off the iPad. As long as both numbers are there you can switch between phone numbers and see iM messaging.
So basically the phone numbers in the iPad are edited thru the individual phones, iTunes acc and not the iPad itself.
Hope this helped if you're having the same issue.

How do I change the phone number a on my FaceTime?

How do I change the phone number associated with my FaceTime on IPAD Mini Retina?

Take at look at this.
Link your phone number and Apple ID for use with FaceTime and

On Maverick my i cloud will not change the verification phone number even though I have change the phone number in apple and on contacts and restarted the computer. Help? I can't get the code necessary to fix the keychain.

On Maverick my i cloud will not change the verification phone number even though I have change the phone number in apple and on contacts and restarted the computer. Help? I can't get the code necessary to fix the keychain without it.

You can change the phone number the verification code is sent to from a device or Mac that has your iCloud keychain enabled as follows:
In iOS 8, tap Settings > iCloud > Keychain > Advanced. In iOS 7, tap Settings > iCloud > Account > Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
In OS X Mavericks v10.9, choose Apple () > System Preferences. Click iCloud, then click Account Details. Make sure the phone number under Verification number is correct. If not, enter another phone number.
If you don't have access to a device or Mac with your iCloud keychain enabled, you'll have to contact Apple support to verify your identity and get assistance making the change: http://www.apple.com/support/icloud/contact/.

How do I set up a new phone number for messaging and facetime on my iPad?

My iPad has it's own phone number through Verizon. Before I knew this, I had already set up messages to use my iPhone number. Now I can't figure out how to set up the iPad phone number for messages and facetime on the iPad.

Are you trying to message another Apple device?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

Is there a way to change the font color for emailing and the signature?

Is there a way to change the font color with email signature on the iPhone and iPad?
I changed the color in Word on my laptop, emailed and copied to my signature, but it converts it back to black........

Looks like you didn't get a reply on your post, but it is still a problem. Font size is supposedly changeable via "Accessibility" in Settings, but it doesn't work. You can turn on "Zoom".

Hi. how do I change the phone number on Messages on my macbook pro?, Hi. how do I change the phone number on Messages on my macbook pro?

Hey how do I change the phone # for my Macbook pro for messaging?

Hi crupperdk!
This behavior is activated by having your Apple ID used in iMessage on a phone. Here is an article with more information about this:
iOS: Using Messages
https://support.apple.com/kb/HT3529
How can I use my iPhone telephone number with iMessage on my iPad, iPod touch, or Messages for Mac?
You can link your iPhone telephone number to your Apple ID for use on your iPad, iPod touch, or Messages for Mac by signing into iMessage with your Apple ID in Settings > Messages. Then sign in to the other device with the same Apple ID in these locations:
iPad and iPod touch: sign in to iMessage in Settings > Messages.
Messages for Mac: sign in to iMessage in Messages > Preferences > Accounts.
Linking your iPhone telephone number with iMessage is not available for the iPad (1st generation) and iPod touch (3rd generation).
Follow these steps for more information or if you are experiencing difficulties linking your iPhone telephone number to your Apple ID.
If an unknown device registers with your Apple ID and you did not initiate that registration, you can reset your Apple ID password to remove it. You will then need to enter this new password on all devices using iMessage or FaceTime.
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

How can I change my phone number for iMessages and FaceTime?

When I am using my iPad for iMessages and FaceTime, it displays a different cell number than my own. How can I change this number to my cell phone? When I log using my Apple ID, it shows the other number and will not let you change it. Is there a way to change it?

I found the answer. You can do this by:
For iMessage-
Settings>Message>Send & Receive>Log into your Apple account
For FaceTime-
Settings>FaceTime>Log into your Apple account
Once in, you can select the phone number you want to use. After completing this task, you can then go to Settings on your iPad and select iMessage and FaceTime. Preform the same steps as above and the phone number will be changed.

Is there any way of changing the iphone number

Hey, when i bourght my iphone, i entered in a number, which i now want to change to a replace with a different number. Can i do this, and how??
The number i entered was registered to a sim card on O2 UK, and once i entered it and continued my sim card deactivated itself and has been ever since. Can i change this and, and enter a different number for the phone to work on.

Majsampath wrote:
Yes. Yesterday I changed the number on my iPhone. You have to visit the AT&T store and get a new SIM card. They give it free of cost. Then you have to insernt it in the iphone. That is fairly simple. Once that is done you can go through iTunes and activiate your iPhone again. It took just a few minutes to activate and my iPhone has a new number!
Did this reset any of your settings or contacts etc?

Is there a way to change the addresses used in an existing iMessage thread?

This is kind of a multi-part question. Let me describe my scenario.
I have many iMessage threads with other iPhone users where the "reply" addresses for one or both ends are the phone *numbers* instead of AppleID email addresses. (This could be due to a number of factors... either they had their "Start new conversations from" address set to their phone number, and/or they started a new conversation with me sending it to my phone number. How it *got* that way doesn't really matter). I want to be able to change the addresses of the conversation to AppleID's (so that I'll still get messages when I change SIM cards, among other reasons).
With iOS 8's new ability to add/remove people from conversations, I thought I would be able to add the AppleID address and remove the phone number address, but there are two problems with that: 1) iOS 8 seems to only allow this for conversations which began as multi-person conversations, and 2) it doesn't seem to want to let you add addresses for people who are already recipients via another address (in other words, if Alice is already on the conversation via her phone number, I can't add her AppleID to the conversation). I guess I could remove the person first, and then re-add them with the other address... but I'd feel safer if I could add the next one before removing the first one.
I know I could just tell the other person to delete our thread and start a new one, but I don't want to lose all of our dialogue and pictures (and I don't want to have to manually save it).
So, the questions:
Is there a way to change the address my counterparty is sending to when they make further replies to our conversation?
Is there a way to change the address I send to when I make further replies to the conversation?
Is there a way to change the default address to use when trying to send someone an iMessage? (What I'm after here is a way to craft my "contact" entry in people's phones so that, when they try to send a message to me and start typing my name, my preferred address comes up on top).
As it looks like the only way to do this might be to use iOS 8's method of adding/removing recipients, is there a way of converting a two-person conversation into a multi-person one?

I think I may have solved it, actually. I find that if I switch the timecode to NDF in the source viewer, it seems to work. I have tried it on three clips and they have sync'd without problems. Hopefully this will continue to be the case.

Is there a way to change the ring tone to none for one particular contact?

I see there is an option to turn the text message settings for a particular contact to 'none'. Is there a way to change the ring tone to 'none' or 'silent' for only one contact. This is a person who calls way too often and I used to turn their ringer to 'none' when I had a blackberry. This way I can talk to this person when it is convenient for me and not have to listen to the ringer everytime they call.

You need to sync a silent ringtone to your phone & then assign it to that contact. Here's one already made:
http://richardkmiller.com/702/iphone-tip-use-a-silent-ringtone-to-screen-calls-i n-your-sleep

Is there a way to change the LUt extension form .CUBE to .cube. on export. TX

Is there a way to change the LUt extension form .CUBE to .cube. on export with this script in photoshop For MAC:
Chris Cox wrote:
The file extensions are written by the export plugin. (which incidentally has a comment that two studios wanted all caps extensions, but I failed to write down which ones in the comments)
To change the filenames, you'd want to add something at the end of doExportLUTs() that uses the supplied path and substitutes the desired extensions, then renames the file.
Thank you
// Export Color Lookup Tables automation in JavaScript
// IN_PROGRESS - why can't ColorSync Utility open any profile with a grid of 160 or larger?
// 150 works, 160 fails -- sent samples in email to Apple on Nov 8, 2013; they are investigating
// DEFERRED - right to left filenames (Arabic) come out wrong because of appending "RGB" and file extensions
// This seems to be a bug in JavaScript's handing of strings, not sure we can solve it easily.
// It might possibly be handled by checking bidi markers in UTF8 stream and adding custom handling for appending text/extensions.
@@@BUILDINFO@@@ ExportColorLookupTables.jsx 1.0.0.0
// BEGIN__HARVEST_EXCEPTION_ZSTRING
<javascriptresource>
<name>$$$/JavaScripts/ExportColorLookupTables/Menu=Color Lookup Tables...</name>
<menu>export</menu>
<enableinfo>true</enableinfo>
<eventid>9AA9D7D6-C209-494A-CC01-4E7D926DA642</eventid>
</javascriptresource>
// END__HARVEST_EXCEPTION_ZSTRING
#target photoshop
const appUIState = app.displayDialogs;
app.displayDialogs = DialogModes.NO; // suppress all app dialogs
app.bringToFront(); // make Photoshop the frontmost app, just in case
// on localized builds we pull the $$$/Strings from a .dat file
$.localize = true;
// from Terminology.jsx
const classApplication = app.charIDToTypeID('capp');
const classProperty = app.charIDToTypeID('Prpr');
const enumTarget = app.charIDToTypeID('Trgt');
const eventGet = app.charIDToTypeID('getd');
const eventSet = app.charIDToTypeID('setd');
const kcolorSettingsStr = app.stringIDToTypeID("colorSettings");
const kDither = app.charIDToTypeID('Dthr');
const keyTo = app.charIDToTypeID('T   ');
const typeNULL = app.charIDToTypeID('null');
const typeOrdinal = app.charIDToTypeID('Ordn');
const kFloatWindowStr = app.stringIDToTypeID("floatWindow");
const typePurgeItem = app.charIDToTypeID('PrgI');
const enumClipboard = app.charIDToTypeID('Clpb');
const eventPurge = app.charIDToTypeID('Prge');
const keyExportLUT = app.charIDToTypeID( "lut " );
const keyFilePath = app.charIDToTypeID( 'fpth' );
const keyDescription = app.charIDToTypeID( 'dscr' );
const keyCopyright = app.charIDToTypeID( 'Cpyr' );
const keyDataPoints = app.charIDToTypeID( 'gPts' );
const keyWriteICC = app.charIDToTypeID( 'wICC' );
const keyWrite3DL = app.charIDToTypeID( 'w3DL' );
const keyWriteCUBE = app.charIDToTypeID( 'wCUB' );
const keyWriteCSP = app.charIDToTypeID( 'wCSP' );
const kScriptOptionsKey = "9AA9D7D6-C209-494A-CC01-4E7D926DA642"; // same as eventID above
const sGridMin = 7; // these must match the slider range defined in the dialog layout
const sGridMax = 256;
const sGridDefault = 32;
// our baseline UI configuration info
var gSaveFilePath = ""; // overwritten by document path
var gDescription = ""; // overwritten by document name
var gCopyright = ""; // "Adobe Systems Inc., All Rights Reserved";
var gGridPoints = sGridDefault;
var gDoSaveICCProfile = true;
var gDoSave3DL = true;
var gDoSaveCUBE = true;
var gDoSaveCSP = true;
gScriptResult = undefined;
// start doing the work...
main();
app.displayDialogs = appUIState; // restore original dialog state
gScriptResult; // must be the last thing - this is returned as the result of the script
function readOptionsFromDescriptor( d )
if (!d)
return;
if (d.hasKey(keyFilePath))
gSaveFilePath = d.getString( keyFilePath ); // will be overridden by UI
if (d.hasKey(keyDescription))
gDescription = d.getString( keyDescription ); // will be overridden always
if (d.hasKey(keyCopyright))
gCopyright = d.getString( keyCopyright );
if (d.hasKey(keyDataPoints))
var temp = d.getInteger( keyDataPoints );
if (temp >= sGridMin && temp <= sGridMax)
gGridPoints = temp;
if (d.hasKey(keyWriteICC))
gDoSaveICCProfile = d.getBoolean( keyWriteICC );
if (d.hasKey(keyWrite3DL))
gDoSave3DL = d.getBoolean( keyWrite3DL );
if (d.hasKey(keyWriteCUBE))
gDoSaveCUBE = d.getBoolean( keyWriteCUBE );
if (d.hasKey(keyWriteCSP))
gDoSaveCSP = d.getBoolean( keyWriteCSP );
function createDescriptorFromOptions()
var desc = new ActionDescriptor();
desc.putString( keyFilePath, gSaveFilePath ); // will be overridden by UI
desc.putString( keyDescription, gDescription ); // will always be overridden by document name
desc.putString( keyCopyright, gCopyright );
desc.putInteger( keyDataPoints, gGridPoints );
desc.putBoolean( keyWriteICC, gDoSaveICCProfile );
desc.putBoolean( keyWrite3DL, gDoSave3DL );
desc.putBoolean( keyWriteCUBE, gDoSaveCUBE );
desc.putBoolean( keyWriteCSP, gDoSaveCSP );
return desc;
function doExportUI()
// DEFERRED - it might be nice to be able to run without UI
// Right now we can't, but someone could modify the script if they so desire
const sDescription = localize("$$$/AdobeScript/Export3DLUT/Description=Description:");
const sCopyright = localize("$$$/AdobeScript/Export3DLUT/Copyright=Copyright:");
const sQuality = localize("$$$/AdobeScript/Export3DLUT/Quality=Quality");
const sGridPoints = localize("$$$/AdobeScript/Export3DLUT/GridPoints=Grid Points:");
const sFormatsToSave = localize("$$$/AdobeScript/Export3DLUT/Formats=Formats");
const sOpenButton = localize("$$$/JavaScripts/psx/OK=OK");
const sCancelButton = localize("$$$/JavaScripts/psx/Cancel=Cancel");
const strTextInvalidType = localize("$$$/JavaScripts/Export3DLUT/InvalidType=Invalid numeric value. Default value inserted.");
const strTextInvalidNum = localize("$$$/JavaScripts/Export3DLUT/InvalidNum=A number between 7 and 256 is required. Closest value inserted.");
const strNoExportsSelected = localize("$$$/JavaScripts/Export3DLUT/NoExportTypesSelected=No export types were selected.");
const strExportPrompt = localize("$$$/JavaScripts/Export3DLUT/ExportColorLookup=Export Color Lookup");
const strUntitledLUT = localize("$$$/JavaScripts/Export3DLUT/UntitledLUTFilename=untitled.lut");
const sSaveICC = localize("$$$/AdobeScript/Export3DLUT/ICCProfile=ICC Profile");
// these are not localized, since they refer to file format extensions
const sSave3DL = "3DL";
const sSaveCUBE = "CUBE";
const sSaveCSP = "CSP";
// strings similar to JPEG quality
const sPoor = localize("$$$/AdobeScript/Export3DLUT/Poor=Poor");
const sLow = localize("$$$/AdobeScript/Export3DLUT/Low=Low");
const sMedium = localize("$$$/AdobeScript/Export3DLUT/Medium=Medium");
const sHigh = localize("$$$/AdobeScript/Export3DLUT/High=High");
const sMaximum = localize("$$$/AdobeScript/Export3DLUT/Maximum=Maximum");
const ui = // dialog resource object
"dialog { \
orientation: 'row', \
gp: Group { \
orientation: 'column', alignment: 'fill', alignChildren: 'fill', \
description: Group { \
orientation: 'row', alignment: 'fill', alignChildren: 'fill', \
st: StaticText { text:'Description:' }, \
et: EditText { characters: 30, properties:{multiline:false}, text:'<your description here>' } \
copyright: Group { \
orientation: 'row', alignment: 'fill', alignChildren: 'fill', \
st: StaticText { text:'Copyright:' }, \
et: EditText { characters: 30, properties:{multiline:false}, text:'<your copyright here>' } \
qual: Panel { \
text: 'Quality', \
orientation: 'column', alignment: 'fill', alignChildren: 'fill', \
g2: Group { \
st: StaticText { text:'Grid Points:' }, \
et: EditText { characters:4, justify:'right' } \
drp: DropDownList {alignment:'right'} \
sl: Slider { minvalue:7, maxvalue:256, value: 32 }, \
options: Panel { \
text: 'Formats', \
orientation: 'column', alignment: 'fill', alignChildren: 'left', \
ck3DL: Checkbox { text:'3DL', value:true }, \
ckCUBE: Checkbox { text:'CUBE', value:true } \
ckCSP: Checkbox { text:'CSP', value:true } \
ckICC: Checkbox { text:'ICC Profile', value:true } \
gButtons: Group { \
orientation: 'column', alignment: 'top', alignChildren: 'fill', \
okBtn: Button { text:'Ok', properties:{name:'ok'} }, \
cancelBtn: Button { text:'Cancel', properties:{name:'cancel'} } \
const titleStr = localize("$$$/AdobeScript/Export3DLUT/DialogTitle/ExportColorLookupTables=Export Color Lookup Tables");
var win = new Window (ui, titleStr ); // new window object with UI resource
    // THEORETICALLY match our dialog background color to the host application
    win.graphics.backgroundColor = win.graphics.newBrush (win.graphics.BrushType.THEME_COLOR, "appDialogBackground");
// poor, low, medium, high, max
var MenuQualityToGridPoints = [ 8, 16, 32, 64, 256 ];
function GridPointsToQualityMenuIndex( num )
var menu = MenuQualityToGridPoints;
var menuItems = menu.length;
if (num <= menu[0])
return 0;
if (num >= menu[ menuItems-1 ])
return (menuItems-1);
for (var i = 0; i < (menuItems-1); ++i)
if ((num >= menu[i]) && (num < menu[i+1]))
return i;
return 0; // just in case of a logic failure
// insert our localized strings
var drop = win.gp.qual.g2.drp; // for easier typing
drop.add('item', sPoor ); // 0
drop.add('item', sLow ); // 1
drop.add('item', sMedium ); // 2
drop.add('item', sHigh ); // 3
drop.add('item', sMaximum ); // 4
drop.selection = drop.items[2]; // Medium
win.gp.description.st.text = sDescription;
win.gp.copyright.st.text = sCopyright;
win.gp.qual.text = sQuality;
win.gp.qual.g2.st.text = sGridPoints;
win.gp.options.text = sFormatsToSave;
win.gp.options.ck3DL.text = sSave3DL;
win.gp.options.ckCUBE.text = sSaveCUBE;
win.gp.options.ckCSP.text = sSaveCSP;
win.gp.options.ckICC.text = sSaveICC;
win.gButtons.okBtn.text = sOpenButton;
win.gButtons.cancelBtn.text = sCancelButton;
// set starting parameters
win.gp.description.et.text = gDescription;
win.gp.copyright.et.text = gCopyright;
win.gp.options.ckICC.value = gDoSaveICCProfile;
win.gp.options.ck3DL.value = gDoSave3DL;
win.gp.options.ckCUBE.value = gDoSaveCUBE;
win.gp.options.ckCSP.value = gDoSaveCSP;
// global flag/hack to keep the UI pretty
var gGlobalPreventChanges = false;
with (win.gp.qual)
sl.value = gGridPoints;
g2.et.text = gGridPoints;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(gGridPoints) ];
// global flag is ugly, but recursive change calls are uglier
g2.et.onChange = function () { if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var val = Number(this.text);
this.parent.parent.sl.value = val;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(val) ];
gGlobalPreventChanges = false; };
sl.onChanging = function () {   if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var val = Math.floor(this.value);
this.parent.g2.et.text = val;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(val) ];
gGlobalPreventChanges = false; };
// DEFERRED - we should also set the value if the same menu item is selected again (reset)
// but the JSX toolkit doesn't support that
drop.onChange = function()
if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var theSelection = this.selection.text;
if (theSelection != null) { // only change if selection made
var theSelectionIndex = this.selection.index;
var newGridPoints = MenuQualityToGridPoints[ theSelectionIndex ];
win.gp.qual.g2.et.text = newGridPoints;
win.gp.qual.sl.value = newGridPoints;
gGlobalPreventChanges = false;
win.onShow = function ()
this.qual.sl.size.width = 128;
this.layout.layout(true);
win.gButtons.cancelBtn.onClick = function () { this.window.close(2); };
// validate inputs when the user hits OK
    var gInAlert = false;
win.gButtons.okBtn.onClick = function ()
if (gInAlert == true)
gInAlert = false;
return;
var gridText = win.gp.qual.g2.et.text;
var w = Number(gridText);
var inputErr = false;
if ( isNaN( w ) )
if ( DialogModes.NO != app.playbackDisplayDialogs )
gInAlert = true;
alert( strTextInvalidType );
gInAlert = false;
win.gp.qual.g2.et.text = sGridDefault;
win.gp.qual.sl.value = sGridDefault;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridDefault) ];
return false;
if ( (w < sGridMin) || (w > sGridMax) )
if ( DialogModes.NO != app.playbackDisplayDialogs )
gInAlert = true;
alert( strTextInvalidNum );
gInAlert = false;
if ( w < sGridMin)
inputErr = true;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridMin) ];
win.gp.qual.g2.et.text = sGridMin;
win.gp.qual.sl.value = sGridMin;
return false;
if ( w > sGridMax)
inputErr = true;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridMax) ];
win.gp.qual.g2.et.text = sGridMax;
win.gp.qual.sl.value = sGridMax;
return false;
if (inputErr == false)
win.close(true);
return;
win.center(); // move to center the dialog
var ret = win.show(); // dialog display
if (2 == ret)
return false; // user cancelled
// user hit OK, copy values from dialog
gDescription = win.gp.description.et.text;
gCopyright = win.gp.copyright.et.text;
gGridPoints = win.gp.qual.sl.value;
gDoSave3DL = win.gp.options.ck3DL.value;
gDoSaveCUBE = win.gp.options.ckCUBE.value;
gDoSaveCSP = win.gp.options.ckCSP.value;
gDoSaveICCProfile = win.gp.options.ckICC.value;
// if no files are going to be saved, then we have zero work to do
if ((false == gDoSaveICCProfile) && (false == gDoSave3DL) &&
(false == gDoSaveCUBE) && (false == gDoSaveCSP) )
// tell the user that no formats were selected
alert( strNoExportsSelected );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
// prompt user for directory and output base filename
// default to directory and filename of current document
var currentDocumentPath
try
// if the file has no path (not saved), then this throws
var documentPath = app.activeDocument.fullName.fsName; // Get the OS friendly file path and name
documentPath = documentPath.replace(/\....$/,''); // remove extension, if there is one
documentPath = documentPath + ".lut"; // add dummy extension
currentDocumentPath = File ( documentPath );
catch (e)
// if there was no document path, default to user's home directory
var defaultName = "~/" + strUntitledLUT;
currentDocumentPath = File(defaultName);
var fname = currentDocumentPath.saveDlg(strExportPrompt);
if (fname == null)
return false;
gSaveFilePath = fname.fsName;
return true;
function doExportLUTs( path )
const keyUsing     = charIDToTypeID( 'Usng' );
const eventExport = charIDToTypeID( 'Expr' );
var desc = new ActionDescriptor();
var desc2 = new ActionDescriptor();
desc2.putString( keyFilePath, path );
desc2.putString( keyDescription, gDescription );
desc2.putInteger( keyDataPoints, gGridPoints );
// assemble the full copyright string, if needed
var copyrightAssembled = gCopyright;
if (gCopyright != "")
var theDate = new Date();
// the year is from 1900 ????
var theYear = (theDate.getYear() + 1900).toString();
// Localization team says to just use the year
var dateString = theYear;
copyrightAssembled = localize("$$$/JavaScripts/Export3DLUT/Copyright=(C) Copyright ") + dateString + " " + gCopyright;
desc2.putString( keyCopyright, copyrightAssembled );
// select output format
desc2.putBoolean( keyWriteICC, gDoSaveICCProfile );
desc2.putBoolean( keyWrite3DL, gDoSave3DL );
desc2.putBoolean( keyWriteCUBE, gDoSaveCUBE );
desc2.putBoolean( keyWriteCSP, gDoSaveCSP );
    desc.putObject( keyUsing, keyExportLUT, desc2 );
try
var resultDesc = executeAction( eventExport, desc, DialogModes.NO );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/ExportLUTFailed=Unable to run the Export Color Lookup plugin because ");
alert( str + e + " : " + e.line );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
return true;
function doRenderGrid( points )
// call the grid rendering plugin to do the work
    const keyRenderGrid = charIDToTypeID( "3grd" );
const keyDataPoints2 = charIDToTypeID( 'grdP' );
var args = new ActionDescriptor();
    args.putInteger( keyDataPoints2, points);
try
var result = executeAction( keyRenderGrid, args, DialogModes.NO );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/RenderGridFailed=Unable to render color grid because ");
alert( str + e + " : " + e.line );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
return true;
function resizeDocumentInPixels( width, height )
var myDocument = app.activeDocument;
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
myDocument.resizeCanvas( width, height, AnchorPosition.MIDDLECENTER)
app.preferences.rulerUnits = originalRulerUnits;
function GetColorSettings()
var desc1 = new ActionDescriptor();
var ref1 = new ActionReference();
ref1.putProperty( classProperty, kcolorSettingsStr );
ref1.putEnumerated( classApplication, typeOrdinal, enumTarget );
desc1.putReference( typeNULL, ref1 );
var result = executeAction( eventGet, desc1, DialogModes.NO );
var desc2 = result.getObjectValue( kcolorSettingsStr );
return desc2;
function GetColorConversionDitherState()
var settings = GetColorSettings();
if (settings.hasKey(kDither))
return settings.getBoolean( kDither );
else
return null;
function ConvertTo16Bit()
const eventConvertMode = charIDToTypeID( 'CnvM' );
const keyDepth = charIDToTypeID( 'Dpth' );
var modeDesc16Bit = new ActionDescriptor();
modeDesc16Bit.putInteger( keyDepth, 16 );
var result = executeAction( eventConvertMode, modeDesc16Bit, DialogModes.NO );
// state = true or false
function SetColorConversionDither( state )
var desc1 = new ActionDescriptor();
var ref1 = new ActionReference();
ref1.putProperty( classProperty, kcolorSettingsStr );
ref1.putEnumerated( classApplication, typeOrdinal, enumTarget );
desc1.putReference( typeNULL, ref1 );
var desc2 = new ActionDescriptor();
desc2.putBoolean( kDither, state );
desc1.putObject( keyTo, kcolorSettingsStr, desc2 );
executeAction( eventSet, desc1, DialogModes.NO );
function PurgeClipboard()
var desc1 = new ActionDescriptor();
desc1.putEnumerated( typeNULL, typePurgeItem, enumClipboard );
var result = executeAction( eventPurge, desc1, DialogModes.NO );
// This helps us avoid resizing existing document views in tabbed document mode.
// This is new functionality, and will not work in older Photoshop versions.
function MoveDocumentToNewWindow()
var desc1 = new ActionDescriptor();
var result = executeAction( kFloatWindowStr, desc1, DialogModes.NO );
function main()
try
var tempDoc = null;
var tempDoc2 = null;
// do basic troubleshooting first
// make sure there is a document
if (!app.activeDocument)
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// check the document mode
var mode = app.activeDocument.mode;
if (mode != DocumentMode.RGB
&& mode != DocumentMode.LAB
&& mode != DocumentMode.CMYK)
var str = localize("$$$/JavaScripts/Export3DLUT/UnsupportedColorMode=Could not export Color Lookup Tables because only RGB, LAB, and CMYK color modes are supported.");
alert(str);
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// check the document depth, for safety
var depth = app.activeDocument.bitsPerChannel; // an object, not a number - why? I have no idea...
var bitsPerChannel = 1;
if (depth == BitsPerChannelType.EIGHT)
bitsPerChannel = 8;
else if (depth == BitsPerChannelType.SIXTEEN)
bitsPerChannel = 16;
else if (depth == BitsPerChannelType.THIRTYTWO)
bitsPerChannel = 32;
else
var str = localize("$$$/JavaScripts/Export3DLUT/UnsupportedImageDepth=Could not export Color Lookup Tables because only 8, 16, and 32 bits/channel are supported.");
alert(str);
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// Check layer types: background plus adjustments only
// For now, don't check each layer - a multiply solid layer still works as a color adjustment, as does selective blending
// Users will get odd results from other layer types (layer masks, pixel layers, etc.)
try
app.activeDocument.backgroundLayer.visible = true;
catch (e)
if (activeDocument.layers.length == 1)
alert( localize("$$$/JavaScripts/Export3DLUT/NoAdjustmentLayers=Could not export Color Lookup Tables because this document has no adjustment layers.") );
else
alert( localize("$$$/JavaScripts/Export3DLUT/NoBackground=Could not export Color Lookup Tables because this document has no background.") );
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// look for last used params via Photoshop registry, getCustomOptions will throw if none exist
try
var desc = app.getCustomOptions(kScriptOptionsKey);
readOptionsFromDescriptor( desc );
catch(e)
// it's ok if we don't have any existing options, continue with defaults
// set some values from the document
gDescription = app.activeDocument.name;
// ask the user for options, bail if they cancel at any point
if ( doExportUI() == false)
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// we're good to go, so save our parameters for next time
app.putCustomOptions(kScriptOptionsKey, createDescriptorFromOptions() );
// remove file extension from filePath, if there is one
gSaveFilePath = gSaveFilePath.replace(/\....$/,'');
// calculate the size of image we need
var width = gGridPoints * gGridPoints;
var height = gGridPoints;
if (mode == DocumentMode.CMYK)
height = gGridPoints*gGridPoints;
// duplicate the user document so we don't mess it up in any way
tempDoc = app.activeDocument.duplicate("temporary");
// make the temporary document active
app.activeDocument.name = tempDoc;
// to avoid resizing existing document views in tabbed mode
MoveDocumentToNewWindow();
// convert 8 bit documents to 16 bit/channel for improved quality of merged adjustments
if (bitsPerChannel == 8)
ConvertTo16Bit();
depth = BitsPerChannelType.SIXTEEN;
// resize the temporary canvas to our target size
resizeDocumentInPixels( width, height )
// select background layer
tempDoc.activeLayer = tempDoc.backgroundLayer;
// render lookup base grid
var worked = doRenderGrid( gGridPoints );
if (worked != true)
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
return; // error should have already been shown, and there is not much we can do
// do not flatten here -- the export automatically gets flattened data
// and we may need layers for LAB->RGB conversion below
// export the chosen formats
worked = doExportLUTs( gSaveFilePath );
if (worked != true)
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
return; // error should have already been shown, and there is not much we can do
// for LAB documents to export 3DLUT (which are inherently RGB), we have to do additional work
// As a bonus, this works for CMYK as well!
if ( mode != DocumentMode.RGB )
var filePath = gSaveFilePath + "RGB";
var oldDitherState = GetColorConversionDitherState();
try
SetColorConversionDither(false);
const targetProfileName = "sRGB IEC61966-2.1";
// new document temp2 in sRGB, matching depth of original
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
tempDoc2 = app.documents.add( width, gGridPoints, 72, "temp2",
NewDocumentMode.RGB, DocumentFill.WHITE,
1.0, depth, targetProfileName );
app.preferences.rulerUnits = originalRulerUnits;
// make the new doc active
app.activeDocument.name = tempDoc2;
// to avoid resizing existing document views in tabbed mode
MoveDocumentToNewWindow();
// insert grid
worked = doRenderGrid( gGridPoints );
if (worked == true)
tempDoc2.selection.selectAll();
tempDoc2.activeLayer = tempDoc2.backgroundLayer;
tempDoc2.selection.copy();
tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
tempDoc2 = null;
// make sure temp1 is active
app.activeDocument.name = tempDoc;
// resize for RGB grid
resizeDocumentInPixels( width, gGridPoints );
tempDoc.selection.selectAll();
tempDoc.paste(true);
PurgeClipboard(); // so we don't leave an odd, large item on the clipboard
tempDoc.selection.deselect();
tempDoc.flatten();
// convert temp1 to sRGB
tempDoc.convertProfile( targetProfileName, Intent.RELATIVECOLORIMETRIC, true, false );
// export the chosen formats
worked = doExportLUTs( filePath );
// at this point we still have to clean up, even if the call failed, so fall through
else
tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/UnableToConvertRGB=Unable to convert image to RGB because ");
alert( str + e + " : " + e.line );
if (tempDoc2 != null) tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
// always reset the dither state
SetColorConversionDither( oldDitherState );
PurgeClipboard(); // so we don't leave an odd, large item on the clipboard
} // if not RGB
// always close temp document without saving
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/UnableToExport=Unable to export LUT because ");
alert( str + e + " : " + e.line );
// always close temp document without saving
if (tempDoc != null) tempDoc.close( SaveOptions.DONOTSAVECHANGES );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script

Hi blabla12345,
(untested and without warranty)
replace this line:
const sSaveCUBE = "CUBE";
with this:
const sSaveCUBE = "cube";
Have fun

HT5275 When I download an attachment, it doesn't open in a new window. It goes to my finder, but I must click on an email attachment at least 3 times in order to find it there. Is there a way to change the preferences to simply open attachment in a new

When I download an attachment, it doesn't open in a new window. It goes to my finder, but I must click on an email attachment at least 3 times in order to find it there. Is there a way to change the preferences to simply open attachment in a new window?

http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback

Is there a way of changing the jdevappunknown_ folder that Ant deploys to?

Using Ant DeployESBSuitcase doesn't work when deploying Projects with dependencies.
Steps to re-create error:
Create a JDeveloper ESB Project called ‘ProjectB’ and add file adapter called ‘WriteFile’ to write a file. Deploy this project using JDeveloper.
Create another JDeveloper ESB Project called ‘ProjectA’ and add a file adapter called ‘ReadFile’ to read a file.
From ProjectA’s routing service add a routing rule and use ‘Browse Target Service Operation’ (Gear wheel icon) and select the deployed ProjectB_WriteFile service.
Deploy ProjectA using JDeveloper.
Use Ant to create a deploymentplan file for both projects by running the ExtractESBDeploymentPlan target.
Note: As these projects are saved under their own directory structure
C:\Workspace\Local\ProjectA and C:\Workspace\Local\ProjectB you will need to copy the ..\ProjectB\ProjectB_WriteFile.wsdl to the ProjectA folder.
Confirm that ProjectA and ProjectB Ant build files DeployESBSuitcase properties (esbMetadataServerHost and esbMetaServerPort) point to another server other than the one you have just deployed ProjectA and ProjectB to using JDeveloper. i.e. a clean server that doesn’t know about these Projects
Deploy ProjectB using Ant’s DeployESBSuitcase target.
Deploy ProjectA using Ant’s DeployESBSuitcase target.
An error is now thrown
C:\Workspace\Local\ProjectA>ant DeployESBSuitcase
Buildfile: build.xml
DeployESBSuitcase:
[echo] Deploying ESB Project ProjectA to serverx
[deployESBSuitcase] Deployment Attempt Response :
[deployESBSuitcase] <deploymentSummary>
[deployESBSuitcase] <message>Entity Deployment Failed</message>
[deployESBSuitcase] <errors>
[deployESBSuitcase] <error code="1049" severity="5">
[deployESBSuitcase] <description>WSDL "esb:///ESB_Projects/Local_ProjectB/ProjectB_WriteFile.wsdl" of service "DefaultSystem.ProjectB_WriteFile" is invalid or unaccessible. Following error is thrown by WSDL Parser : WSDL Parsing Failed: org.apache.slide.structure.ObjectNotFoundException: No object found at /files/ESB_Projects/Local_ProjectB</description>
[deployESBSuitcase] <fix>Ensure that the WSDL is accessible and valid. If the problem persists, Contact Oracle Support.</fix>
[deployESBSuitcase] </error>
[deployESBSuitcase] </errors>
[deployESBSuitcase] </deploymentSummary>
[deployESBSuitcase]
[deployESBSuitcase] Deployment Failed ...Unhandled Exception
[deployESBSuitcase] java.lang.Exception: Deployment attempt failed, please review deployment attempt response above
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:128)
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:175)
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeployESBSuitcaseTask.execute(DeployESBSuitcaseTask.java:510)
[deployESBSuitcase] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[deployESBSuitcase] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[deployESBSuitcase] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[deployESBSuitcase] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[deployESBSuitcase] at java.lang.reflect.Method.invoke(Method.java:585)
[deployESBSuitcase] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
[deployESBSuitcase] at org.apache.tools.ant.Task.perform(Task.java:348)
[deployESBSuitcase] at org.apache.tools.ant.Target.execute(Target.java:357)
[deployESBSuitcase] at org.apache.tools.ant.Target.performTasks(Target.java:385)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[deployESBSuitcase] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
[deployESBSuitcase] at org.apache.tools.ant.Main.runBuild(Main.java:758)
[deployESBSuitcase] at org.apache.tools.ant.Main.startAnt(Main.java:217)
[deployESBSuitcase] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[deployESBSuitcase] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
BUILD FAILED
java.lang.Exception: Deployment attempt failed, please review deployment attempt response above
at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:128)
at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:175)
at oracle.tip.esb.client.anttasks.DeployESBSuitcaseTask.execute(DeployESBSuitcaseTask.java:510)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Total time: 2 seconds
C:\Workspace\Local\ProjectA>
This error is thrown as ProjectB’s wsdl file cannot be found under esb:///ESB_Projects/Local_ProjectB/ProjectB_WriteFile.wsdl.
This is due to Ant deploying ProjectB under …\ESB_Projects\jdevappunknown_ rather than …\ESB_Projects\Local_ProjectB
When deploying ESB projects from JDeveloper they are created under the following structure: <Oracle_Home>\integration\esb\oraesb\artifacts\store\metadata\files\ESB_Projects\<JDev_Workspace>\<Project_Name>
However when using the Ant target DeployESBSuitcase ALL projects are deployed to the same folder:
<Oracle_Home>\integration\esb\oraesb\artifacts\store\metadata\files\ESB_Projects\jdevappunknown_
Is there a way of changing the jdevappunknown folder used by Ant deployments?
Edited by: user2000 on Apr 27, 2009 3:37 PM

James,
Following my steps above I don't get anything in the deploymentPlan for either ProjectA or ProjectB which includes a WSDL URL I can modify.
ProjectA includes the ProjectB_WrieFile.esbsv file which contains the following line:
<wsdlURL>esb:///ESB_Projects/Local_ProjectB/ProjectB_Write.wsdl</wsdlURL>
Is there something I can change which will mean when I regenerate the deploymentPlan it will include the WSDL location?
Thanks
Alistair
Edited by: user2000 on Apr 28, 2009 11:55 AM
I've included Both Deployment Plans:
ProjectA Deployment Plan
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<deploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectA_ReadFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Read" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.inbound.FileActivationSpec" name="ActivationSpec"/>
<property value="Archive" name="LogicalArchiveDirectory"/>
<property value="true" name="DeleteFile"/>
<property value=".*\.txt" name="IncludeFiles"/>
<property value="60" name="PollingFrequency"/>
<property value="0" name="MinimumAge"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
<property value="*.txt" name="UIincludeWildcard"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectA_ReadFile_RS" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<serviceDefinition>
<property value="ProjectA_ReadFile.wsdl" name="wsdlURL"/>
</serviceDefinition>
</properties>
</serviceDeploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectB_WriteFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Write" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.outbound.FileInteractionSpec" name="InteractionSpec"/>
<property value="ProjectB_%SEQ%.txt" name="FileNamingConvention"/>
<property value="1" name="NumberMessages"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
</deploymentPlan>
Project B Deployment Plan
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<deploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectB_WriteFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Write" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.outbound.FileInteractionSpec" name="InteractionSpec"/>
<property value="ProjectB_%SEQ%.txt" name="FileNamingConvention"/>
<property value="1" name="NumberMessages"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
</deploymentPlan>

Is there a way to change the phone number in Messages and FaceTime?

Similar Messages

Maybe you are looking for