Is there a way to change the ring tone to none for one particular contact?

I see there is an option to turn the text message settings for a particular contact to 'none'. Is there a way to change the ring tone to 'none' or 'silent' for only one contact. This is a person who calls way too often and I used to turn their ringer to 'none' when I had a blackberry. This way I can talk to this person when it is convenient for me and not have to listen to the ringer everytime they call.

You need to sync a silent ringtone to your phone & then assign it to that contact. Here's one already made:
http://richardkmiller.com/702/iphone-tip-use-a-silent-ringtone-to-screen-calls-i n-your-sleep

Similar Messages

Is there a way to change the ring tones for notifications in the various Playbook applications?

For example, our dogs bark every time the Video Chat notification sounds because they think the doorbell is ringing. It would be great to be able to have a selection of tones for the various notifications.

Simple answer, No.

Is there a way to change the alert tone for the find my iphone app?

Is there a way to change the alert tone for the find my iphone app? The one they use from the factory is terrible! I tried it out and could hardly hear it from 5 feet away!

Welcome to the Apple community.
Unfortunately, so far as I am aware you cannot change this tone. I must admit I don't fully understand your problem, I've tried it myself and can hear it from some distance away.

Is there a way to change the default Save As location for Adobe Reader XI?

Is there a way to change the default Save As location for Adobe Reader XI?

kel-drago wrote:
Can't be that difficult to arrange.
No, it's not. But someone has to request it: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Is there a way to change the download time (hour-minutes) for podcasts?, Is there a way to change the download time (hour-minutes) for podcasts?

Is there a way to change the specific time when subscriptions to podcasts are downloaded? I seem to be locked in to 6:29 pm.
Thanks.

i have the same problem. i bought a new external hard drive and i am trying to move my entire library onto it. i copied all of my itunes library onto it but when i tried to delete a song off of my initial C: drive to test it, i had to go in an individually change where the songs location was. i already tried changing where the itunes music folder was located however the library still says its located on the C: drive.

Is there a way to change the iMessage tone when I receive a message on my macbook?

When I receive a iMessage or text message on my macbook, the sound makes a ding. My question is can I change the tone to something other than a ding?

Hi,
In Mavericks (where you posted) > Messages App > Preferences > General Section you can set the Messages Received sound.
In Mavericks this is a sounds from the App or the System Alerts or Sounds from ~/Library/Sounds.
In Yosomite (what you say you have) you now have iOS sounds listed and these are Alerts or Ringtones on an iPhone.
Not since Mountain Lion have you been able to set specific sounds to specific actions or even specific Buddies.
7:14 pm Thursday; December 25, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Is there a way to change the sync preferences on itunes for windows?

I have an iphone, but I don't want everything to be synched every time I connect my phone to my computer.

Go to Edit Menu, select "Preference". Click "Device" Tab, make sure "Prevent iPads, iPhones, iPads from sync automatically" is checked

Is there a way to change the xml message generated by JDeveloper Proxy

Hi,
I have created jax-ws proxy client using JDeveloper 10g. I need to change the generated xml message tags. I need to remove the namespace prefix tags from the xml message. For ex: the current request message looks like this:
<ns0:EMPLOYEE_NAME>John</ns0:EMPLOYEE_NAME>
should be
<EMPLOYEE_NAME>John</EMPLOYEE_NAME>
without the nso prefix.
How can I do that? Please help me.
Thanks.

To original poster, please just select "Problem Solved" to help any future questions about this.
Is there a way to change the text message ringer? No.
End of thread

Is there a way to change the LUt extension form .CUBE to .cube. on export. TX

Is there a way to change the LUt extension form .CUBE to .cube. on export with this script in photoshop For MAC:
Chris Cox wrote:
The file extensions are written by the export plugin. (which incidentally has a comment that two studios wanted all caps extensions, but I failed to write down which ones in the comments)
To change the filenames, you'd want to add something at the end of doExportLUTs() that uses the supplied path and substitutes the desired extensions, then renames the file.
Thank you
// Export Color Lookup Tables automation in JavaScript
// IN_PROGRESS - why can't ColorSync Utility open any profile with a grid of 160 or larger?
// 150 works, 160 fails -- sent samples in email to Apple on Nov 8, 2013; they are investigating
// DEFERRED - right to left filenames (Arabic) come out wrong because of appending "RGB" and file extensions
// This seems to be a bug in JavaScript's handing of strings, not sure we can solve it easily.
// It might possibly be handled by checking bidi markers in UTF8 stream and adding custom handling for appending text/extensions.
@@@BUILDINFO@@@ ExportColorLookupTables.jsx 1.0.0.0
// BEGIN__HARVEST_EXCEPTION_ZSTRING
<javascriptresource>
<name>$$$/JavaScripts/ExportColorLookupTables/Menu=Color Lookup Tables...</name>
<menu>export</menu>
<enableinfo>true</enableinfo>
<eventid>9AA9D7D6-C209-494A-CC01-4E7D926DA642</eventid>
</javascriptresource>
// END__HARVEST_EXCEPTION_ZSTRING
#target photoshop
const appUIState = app.displayDialogs;
app.displayDialogs = DialogModes.NO; // suppress all app dialogs
app.bringToFront(); // make Photoshop the frontmost app, just in case
// on localized builds we pull the $$$/Strings from a .dat file
$.localize = true;
// from Terminology.jsx
const classApplication = app.charIDToTypeID('capp');
const classProperty = app.charIDToTypeID('Prpr');
const enumTarget = app.charIDToTypeID('Trgt');
const eventGet = app.charIDToTypeID('getd');
const eventSet = app.charIDToTypeID('setd');
const kcolorSettingsStr = app.stringIDToTypeID("colorSettings");
const kDither = app.charIDToTypeID('Dthr');
const keyTo = app.charIDToTypeID('T   ');
const typeNULL = app.charIDToTypeID('null');
const typeOrdinal = app.charIDToTypeID('Ordn');
const kFloatWindowStr = app.stringIDToTypeID("floatWindow");
const typePurgeItem = app.charIDToTypeID('PrgI');
const enumClipboard = app.charIDToTypeID('Clpb');
const eventPurge = app.charIDToTypeID('Prge');
const keyExportLUT = app.charIDToTypeID( "lut " );
const keyFilePath = app.charIDToTypeID( 'fpth' );
const keyDescription = app.charIDToTypeID( 'dscr' );
const keyCopyright = app.charIDToTypeID( 'Cpyr' );
const keyDataPoints = app.charIDToTypeID( 'gPts' );
const keyWriteICC = app.charIDToTypeID( 'wICC' );
const keyWrite3DL = app.charIDToTypeID( 'w3DL' );
const keyWriteCUBE = app.charIDToTypeID( 'wCUB' );
const keyWriteCSP = app.charIDToTypeID( 'wCSP' );
const kScriptOptionsKey = "9AA9D7D6-C209-494A-CC01-4E7D926DA642"; // same as eventID above
const sGridMin = 7; // these must match the slider range defined in the dialog layout
const sGridMax = 256;
const sGridDefault = 32;
// our baseline UI configuration info
var gSaveFilePath = ""; // overwritten by document path
var gDescription = ""; // overwritten by document name
var gCopyright = ""; // "Adobe Systems Inc., All Rights Reserved";
var gGridPoints = sGridDefault;
var gDoSaveICCProfile = true;
var gDoSave3DL = true;
var gDoSaveCUBE = true;
var gDoSaveCSP = true;
gScriptResult = undefined;
// start doing the work...
main();
app.displayDialogs = appUIState; // restore original dialog state
gScriptResult; // must be the last thing - this is returned as the result of the script
function readOptionsFromDescriptor( d )
if (!d)
return;
if (d.hasKey(keyFilePath))
gSaveFilePath = d.getString( keyFilePath ); // will be overridden by UI
if (d.hasKey(keyDescription))
gDescription = d.getString( keyDescription ); // will be overridden always
if (d.hasKey(keyCopyright))
gCopyright = d.getString( keyCopyright );
if (d.hasKey(keyDataPoints))
var temp = d.getInteger( keyDataPoints );
if (temp >= sGridMin && temp <= sGridMax)
gGridPoints = temp;
if (d.hasKey(keyWriteICC))
gDoSaveICCProfile = d.getBoolean( keyWriteICC );
if (d.hasKey(keyWrite3DL))
gDoSave3DL = d.getBoolean( keyWrite3DL );
if (d.hasKey(keyWriteCUBE))
gDoSaveCUBE = d.getBoolean( keyWriteCUBE );
if (d.hasKey(keyWriteCSP))
gDoSaveCSP = d.getBoolean( keyWriteCSP );
function createDescriptorFromOptions()
var desc = new ActionDescriptor();
desc.putString( keyFilePath, gSaveFilePath ); // will be overridden by UI
desc.putString( keyDescription, gDescription ); // will always be overridden by document name
desc.putString( keyCopyright, gCopyright );
desc.putInteger( keyDataPoints, gGridPoints );
desc.putBoolean( keyWriteICC, gDoSaveICCProfile );
desc.putBoolean( keyWrite3DL, gDoSave3DL );
desc.putBoolean( keyWriteCUBE, gDoSaveCUBE );
desc.putBoolean( keyWriteCSP, gDoSaveCSP );
return desc;
function doExportUI()
// DEFERRED - it might be nice to be able to run without UI
// Right now we can't, but someone could modify the script if they so desire
const sDescription = localize("$$$/AdobeScript/Export3DLUT/Description=Description:");
const sCopyright = localize("$$$/AdobeScript/Export3DLUT/Copyright=Copyright:");
const sQuality = localize("$$$/AdobeScript/Export3DLUT/Quality=Quality");
const sGridPoints = localize("$$$/AdobeScript/Export3DLUT/GridPoints=Grid Points:");
const sFormatsToSave = localize("$$$/AdobeScript/Export3DLUT/Formats=Formats");
const sOpenButton = localize("$$$/JavaScripts/psx/OK=OK");
const sCancelButton = localize("$$$/JavaScripts/psx/Cancel=Cancel");
const strTextInvalidType = localize("$$$/JavaScripts/Export3DLUT/InvalidType=Invalid numeric value. Default value inserted.");
const strTextInvalidNum = localize("$$$/JavaScripts/Export3DLUT/InvalidNum=A number between 7 and 256 is required. Closest value inserted.");
const strNoExportsSelected = localize("$$$/JavaScripts/Export3DLUT/NoExportTypesSelected=No export types were selected.");
const strExportPrompt = localize("$$$/JavaScripts/Export3DLUT/ExportColorLookup=Export Color Lookup");
const strUntitledLUT = localize("$$$/JavaScripts/Export3DLUT/UntitledLUTFilename=untitled.lut");
const sSaveICC = localize("$$$/AdobeScript/Export3DLUT/ICCProfile=ICC Profile");
// these are not localized, since they refer to file format extensions
const sSave3DL = "3DL";
const sSaveCUBE = "CUBE";
const sSaveCSP = "CSP";
// strings similar to JPEG quality
const sPoor = localize("$$$/AdobeScript/Export3DLUT/Poor=Poor");
const sLow = localize("$$$/AdobeScript/Export3DLUT/Low=Low");
const sMedium = localize("$$$/AdobeScript/Export3DLUT/Medium=Medium");
const sHigh = localize("$$$/AdobeScript/Export3DLUT/High=High");
const sMaximum = localize("$$$/AdobeScript/Export3DLUT/Maximum=Maximum");
const ui = // dialog resource object
"dialog { \
orientation: 'row', \
gp: Group { \
orientation: 'column', alignment: 'fill', alignChildren: 'fill', \
description: Group { \
orientation: 'row', alignment: 'fill', alignChildren: 'fill', \
st: StaticText { text:'Description:' }, \
et: EditText { characters: 30, properties:{multiline:false}, text:'<your description here>' } \
copyright: Group { \
orientation: 'row', alignment: 'fill', alignChildren: 'fill', \
st: StaticText { text:'Copyright:' }, \
et: EditText { characters: 30, properties:{multiline:false}, text:'<your copyright here>' } \
qual: Panel { \
text: 'Quality', \
orientation: 'column', alignment: 'fill', alignChildren: 'fill', \
g2: Group { \
st: StaticText { text:'Grid Points:' }, \
et: EditText { characters:4, justify:'right' } \
drp: DropDownList {alignment:'right'} \
sl: Slider { minvalue:7, maxvalue:256, value: 32 }, \
options: Panel { \
text: 'Formats', \
orientation: 'column', alignment: 'fill', alignChildren: 'left', \
ck3DL: Checkbox { text:'3DL', value:true }, \
ckCUBE: Checkbox { text:'CUBE', value:true } \
ckCSP: Checkbox { text:'CSP', value:true } \
ckICC: Checkbox { text:'ICC Profile', value:true } \
gButtons: Group { \
orientation: 'column', alignment: 'top', alignChildren: 'fill', \
okBtn: Button { text:'Ok', properties:{name:'ok'} }, \
cancelBtn: Button { text:'Cancel', properties:{name:'cancel'} } \
const titleStr = localize("$$$/AdobeScript/Export3DLUT/DialogTitle/ExportColorLookupTables=Export Color Lookup Tables");
var win = new Window (ui, titleStr ); // new window object with UI resource
    // THEORETICALLY match our dialog background color to the host application
    win.graphics.backgroundColor = win.graphics.newBrush (win.graphics.BrushType.THEME_COLOR, "appDialogBackground");
// poor, low, medium, high, max
var MenuQualityToGridPoints = [ 8, 16, 32, 64, 256 ];
function GridPointsToQualityMenuIndex( num )
var menu = MenuQualityToGridPoints;
var menuItems = menu.length;
if (num <= menu[0])
return 0;
if (num >= menu[ menuItems-1 ])
return (menuItems-1);
for (var i = 0; i < (menuItems-1); ++i)
if ((num >= menu[i]) && (num < menu[i+1]))
return i;
return 0; // just in case of a logic failure
// insert our localized strings
var drop = win.gp.qual.g2.drp; // for easier typing
drop.add('item', sPoor ); // 0
drop.add('item', sLow ); // 1
drop.add('item', sMedium ); // 2
drop.add('item', sHigh ); // 3
drop.add('item', sMaximum ); // 4
drop.selection = drop.items[2]; // Medium
win.gp.description.st.text = sDescription;
win.gp.copyright.st.text = sCopyright;
win.gp.qual.text = sQuality;
win.gp.qual.g2.st.text = sGridPoints;
win.gp.options.text = sFormatsToSave;
win.gp.options.ck3DL.text = sSave3DL;
win.gp.options.ckCUBE.text = sSaveCUBE;
win.gp.options.ckCSP.text = sSaveCSP;
win.gp.options.ckICC.text = sSaveICC;
win.gButtons.okBtn.text = sOpenButton;
win.gButtons.cancelBtn.text = sCancelButton;
// set starting parameters
win.gp.description.et.text = gDescription;
win.gp.copyright.et.text = gCopyright;
win.gp.options.ckICC.value = gDoSaveICCProfile;
win.gp.options.ck3DL.value = gDoSave3DL;
win.gp.options.ckCUBE.value = gDoSaveCUBE;
win.gp.options.ckCSP.value = gDoSaveCSP;
// global flag/hack to keep the UI pretty
var gGlobalPreventChanges = false;
with (win.gp.qual)
sl.value = gGridPoints;
g2.et.text = gGridPoints;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(gGridPoints) ];
// global flag is ugly, but recursive change calls are uglier
g2.et.onChange = function () { if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var val = Number(this.text);
this.parent.parent.sl.value = val;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(val) ];
gGlobalPreventChanges = false; };
sl.onChanging = function () {   if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var val = Math.floor(this.value);
this.parent.g2.et.text = val;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(val) ];
gGlobalPreventChanges = false; };
// DEFERRED - we should also set the value if the same menu item is selected again (reset)
// but the JSX toolkit doesn't support that
drop.onChange = function()
if (gGlobalPreventChanges) { return; }
gGlobalPreventChanges = true;
var theSelection = this.selection.text;
if (theSelection != null) { // only change if selection made
var theSelectionIndex = this.selection.index;
var newGridPoints = MenuQualityToGridPoints[ theSelectionIndex ];
win.gp.qual.g2.et.text = newGridPoints;
win.gp.qual.sl.value = newGridPoints;
gGlobalPreventChanges = false;
win.onShow = function ()
this.qual.sl.size.width = 128;
this.layout.layout(true);
win.gButtons.cancelBtn.onClick = function () { this.window.close(2); };
// validate inputs when the user hits OK
    var gInAlert = false;
win.gButtons.okBtn.onClick = function ()
if (gInAlert == true)
gInAlert = false;
return;
var gridText = win.gp.qual.g2.et.text;
var w = Number(gridText);
var inputErr = false;
if ( isNaN( w ) )
if ( DialogModes.NO != app.playbackDisplayDialogs )
gInAlert = true;
alert( strTextInvalidType );
gInAlert = false;
win.gp.qual.g2.et.text = sGridDefault;
win.gp.qual.sl.value = sGridDefault;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridDefault) ];
return false;
if ( (w < sGridMin) || (w > sGridMax) )
if ( DialogModes.NO != app.playbackDisplayDialogs )
gInAlert = true;
alert( strTextInvalidNum );
gInAlert = false;
if ( w < sGridMin)
inputErr = true;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridMin) ];
win.gp.qual.g2.et.text = sGridMin;
win.gp.qual.sl.value = sGridMin;
return false;
if ( w > sGridMax)
inputErr = true;
drop.selection = drop.items[ GridPointsToQualityMenuIndex(sGridMax) ];
win.gp.qual.g2.et.text = sGridMax;
win.gp.qual.sl.value = sGridMax;
return false;
if (inputErr == false)
win.close(true);
return;
win.center(); // move to center the dialog
var ret = win.show(); // dialog display
if (2 == ret)
return false; // user cancelled
// user hit OK, copy values from dialog
gDescription = win.gp.description.et.text;
gCopyright = win.gp.copyright.et.text;
gGridPoints = win.gp.qual.sl.value;
gDoSave3DL = win.gp.options.ck3DL.value;
gDoSaveCUBE = win.gp.options.ckCUBE.value;
gDoSaveCSP = win.gp.options.ckCSP.value;
gDoSaveICCProfile = win.gp.options.ckICC.value;
// if no files are going to be saved, then we have zero work to do
if ((false == gDoSaveICCProfile) && (false == gDoSave3DL) &&
(false == gDoSaveCUBE) && (false == gDoSaveCSP) )
// tell the user that no formats were selected
alert( strNoExportsSelected );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
// prompt user for directory and output base filename
// default to directory and filename of current document
var currentDocumentPath
try
// if the file has no path (not saved), then this throws
var documentPath = app.activeDocument.fullName.fsName; // Get the OS friendly file path and name
documentPath = documentPath.replace(/\....$/,''); // remove extension, if there is one
documentPath = documentPath + ".lut"; // add dummy extension
currentDocumentPath = File ( documentPath );
catch (e)
// if there was no document path, default to user's home directory
var defaultName = "~/" + strUntitledLUT;
currentDocumentPath = File(defaultName);
var fname = currentDocumentPath.saveDlg(strExportPrompt);
if (fname == null)
return false;
gSaveFilePath = fname.fsName;
return true;
function doExportLUTs( path )
const keyUsing     = charIDToTypeID( 'Usng' );
const eventExport = charIDToTypeID( 'Expr' );
var desc = new ActionDescriptor();
var desc2 = new ActionDescriptor();
desc2.putString( keyFilePath, path );
desc2.putString( keyDescription, gDescription );
desc2.putInteger( keyDataPoints, gGridPoints );
// assemble the full copyright string, if needed
var copyrightAssembled = gCopyright;
if (gCopyright != "")
var theDate = new Date();
// the year is from 1900 ????
var theYear = (theDate.getYear() + 1900).toString();
// Localization team says to just use the year
var dateString = theYear;
copyrightAssembled = localize("$$$/JavaScripts/Export3DLUT/Copyright=(C) Copyright ") + dateString + " " + gCopyright;
desc2.putString( keyCopyright, copyrightAssembled );
// select output format
desc2.putBoolean( keyWriteICC, gDoSaveICCProfile );
desc2.putBoolean( keyWrite3DL, gDoSave3DL );
desc2.putBoolean( keyWriteCUBE, gDoSaveCUBE );
desc2.putBoolean( keyWriteCSP, gDoSaveCSP );
    desc.putObject( keyUsing, keyExportLUT, desc2 );
try
var resultDesc = executeAction( eventExport, desc, DialogModes.NO );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/ExportLUTFailed=Unable to run the Export Color Lookup plugin because ");
alert( str + e + " : " + e.line );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
return true;
function doRenderGrid( points )
// call the grid rendering plugin to do the work
    const keyRenderGrid = charIDToTypeID( "3grd" );
const keyDataPoints2 = charIDToTypeID( 'grdP' );
var args = new ActionDescriptor();
    args.putInteger( keyDataPoints2, points);
try
var result = executeAction( keyRenderGrid, args, DialogModes.NO );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/RenderGridFailed=Unable to render color grid because ");
alert( str + e + " : " + e.line );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return false;
return true;
function resizeDocumentInPixels( width, height )
var myDocument = app.activeDocument;
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
myDocument.resizeCanvas( width, height, AnchorPosition.MIDDLECENTER)
app.preferences.rulerUnits = originalRulerUnits;
function GetColorSettings()
var desc1 = new ActionDescriptor();
var ref1 = new ActionReference();
ref1.putProperty( classProperty, kcolorSettingsStr );
ref1.putEnumerated( classApplication, typeOrdinal, enumTarget );
desc1.putReference( typeNULL, ref1 );
var result = executeAction( eventGet, desc1, DialogModes.NO );
var desc2 = result.getObjectValue( kcolorSettingsStr );
return desc2;
function GetColorConversionDitherState()
var settings = GetColorSettings();
if (settings.hasKey(kDither))
return settings.getBoolean( kDither );
else
return null;
function ConvertTo16Bit()
const eventConvertMode = charIDToTypeID( 'CnvM' );
const keyDepth = charIDToTypeID( 'Dpth' );
var modeDesc16Bit = new ActionDescriptor();
modeDesc16Bit.putInteger( keyDepth, 16 );
var result = executeAction( eventConvertMode, modeDesc16Bit, DialogModes.NO );
// state = true or false
function SetColorConversionDither( state )
var desc1 = new ActionDescriptor();
var ref1 = new ActionReference();
ref1.putProperty( classProperty, kcolorSettingsStr );
ref1.putEnumerated( classApplication, typeOrdinal, enumTarget );
desc1.putReference( typeNULL, ref1 );
var desc2 = new ActionDescriptor();
desc2.putBoolean( kDither, state );
desc1.putObject( keyTo, kcolorSettingsStr, desc2 );
executeAction( eventSet, desc1, DialogModes.NO );
function PurgeClipboard()
var desc1 = new ActionDescriptor();
desc1.putEnumerated( typeNULL, typePurgeItem, enumClipboard );
var result = executeAction( eventPurge, desc1, DialogModes.NO );
// This helps us avoid resizing existing document views in tabbed document mode.
// This is new functionality, and will not work in older Photoshop versions.
function MoveDocumentToNewWindow()
var desc1 = new ActionDescriptor();
var result = executeAction( kFloatWindowStr, desc1, DialogModes.NO );
function main()
try
var tempDoc = null;
var tempDoc2 = null;
// do basic troubleshooting first
// make sure there is a document
if (!app.activeDocument)
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// check the document mode
var mode = app.activeDocument.mode;
if (mode != DocumentMode.RGB
&& mode != DocumentMode.LAB
&& mode != DocumentMode.CMYK)
var str = localize("$$$/JavaScripts/Export3DLUT/UnsupportedColorMode=Could not export Color Lookup Tables because only RGB, LAB, and CMYK color modes are supported.");
alert(str);
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// check the document depth, for safety
var depth = app.activeDocument.bitsPerChannel; // an object, not a number - why? I have no idea...
var bitsPerChannel = 1;
if (depth == BitsPerChannelType.EIGHT)
bitsPerChannel = 8;
else if (depth == BitsPerChannelType.SIXTEEN)
bitsPerChannel = 16;
else if (depth == BitsPerChannelType.THIRTYTWO)
bitsPerChannel = 32;
else
var str = localize("$$$/JavaScripts/Export3DLUT/UnsupportedImageDepth=Could not export Color Lookup Tables because only 8, 16, and 32 bits/channel are supported.");
alert(str);
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// Check layer types: background plus adjustments only
// For now, don't check each layer - a multiply solid layer still works as a color adjustment, as does selective blending
// Users will get odd results from other layer types (layer masks, pixel layers, etc.)
try
app.activeDocument.backgroundLayer.visible = true;
catch (e)
if (activeDocument.layers.length == 1)
alert( localize("$$$/JavaScripts/Export3DLUT/NoAdjustmentLayers=Could not export Color Lookup Tables because this document has no adjustment layers.") );
else
alert( localize("$$$/JavaScripts/Export3DLUT/NoBackground=Could not export Color Lookup Tables because this document has no background.") );
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// look for last used params via Photoshop registry, getCustomOptions will throw if none exist
try
var desc = app.getCustomOptions(kScriptOptionsKey);
readOptionsFromDescriptor( desc );
catch(e)
// it's ok if we don't have any existing options, continue with defaults
// set some values from the document
gDescription = app.activeDocument.name;
// ask the user for options, bail if they cancel at any point
if ( doExportUI() == false)
    gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
return;
// we're good to go, so save our parameters for next time
app.putCustomOptions(kScriptOptionsKey, createDescriptorFromOptions() );
// remove file extension from filePath, if there is one
gSaveFilePath = gSaveFilePath.replace(/\....$/,'');
// calculate the size of image we need
var width = gGridPoints * gGridPoints;
var height = gGridPoints;
if (mode == DocumentMode.CMYK)
height = gGridPoints*gGridPoints;
// duplicate the user document so we don't mess it up in any way
tempDoc = app.activeDocument.duplicate("temporary");
// make the temporary document active
app.activeDocument.name = tempDoc;
// to avoid resizing existing document views in tabbed mode
MoveDocumentToNewWindow();
// convert 8 bit documents to 16 bit/channel for improved quality of merged adjustments
if (bitsPerChannel == 8)
ConvertTo16Bit();
depth = BitsPerChannelType.SIXTEEN;
// resize the temporary canvas to our target size
resizeDocumentInPixels( width, height )
// select background layer
tempDoc.activeLayer = tempDoc.backgroundLayer;
// render lookup base grid
var worked = doRenderGrid( gGridPoints );
if (worked != true)
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
return; // error should have already been shown, and there is not much we can do
// do not flatten here -- the export automatically gets flattened data
// and we may need layers for LAB->RGB conversion below
// export the chosen formats
worked = doExportLUTs( gSaveFilePath );
if (worked != true)
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
return; // error should have already been shown, and there is not much we can do
// for LAB documents to export 3DLUT (which are inherently RGB), we have to do additional work
// As a bonus, this works for CMYK as well!
if ( mode != DocumentMode.RGB )
var filePath = gSaveFilePath + "RGB";
var oldDitherState = GetColorConversionDitherState();
try
SetColorConversionDither(false);
const targetProfileName = "sRGB IEC61966-2.1";
// new document temp2 in sRGB, matching depth of original
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
tempDoc2 = app.documents.add( width, gGridPoints, 72, "temp2",
NewDocumentMode.RGB, DocumentFill.WHITE,
1.0, depth, targetProfileName );
app.preferences.rulerUnits = originalRulerUnits;
// make the new doc active
app.activeDocument.name = tempDoc2;
// to avoid resizing existing document views in tabbed mode
MoveDocumentToNewWindow();
// insert grid
worked = doRenderGrid( gGridPoints );
if (worked == true)
tempDoc2.selection.selectAll();
tempDoc2.activeLayer = tempDoc2.backgroundLayer;
tempDoc2.selection.copy();
tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
tempDoc2 = null;
// make sure temp1 is active
app.activeDocument.name = tempDoc;
// resize for RGB grid
resizeDocumentInPixels( width, gGridPoints );
tempDoc.selection.selectAll();
tempDoc.paste(true);
PurgeClipboard(); // so we don't leave an odd, large item on the clipboard
tempDoc.selection.deselect();
tempDoc.flatten();
// convert temp1 to sRGB
tempDoc.convertProfile( targetProfileName, Intent.RELATIVECOLORIMETRIC, true, false );
// export the chosen formats
worked = doExportLUTs( filePath );
// at this point we still have to clean up, even if the call failed, so fall through
else
tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/UnableToConvertRGB=Unable to convert image to RGB because ");
alert( str + e + " : " + e.line );
if (tempDoc2 != null) tempDoc2.close( SaveOptions.DONOTSAVECHANGES );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
// always reset the dither state
SetColorConversionDither( oldDitherState );
PurgeClipboard(); // so we don't leave an odd, large item on the clipboard
} // if not RGB
// always close temp document without saving
tempDoc.close( SaveOptions.DONOTSAVECHANGES );
catch (e)
if ( e.number != 8007 ) { // don't report error on user cancel
var str = localize("$$$/JavaScripts/Export3DLUT/UnableToExport=Unable to export LUT because ");
alert( str + e + " : " + e.line );
// always close temp document without saving
if (tempDoc != null) tempDoc.close( SaveOptions.DONOTSAVECHANGES );
gScriptResult = 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script

Hi blabla12345,
(untested and without warranty)
replace this line:
const sSaveCUBE = "CUBE";
with this:
const sSaveCUBE = "cube";
Have fun

HT5275 When I download an attachment, it doesn't open in a new window. It goes to my finder, but I must click on an email attachment at least 3 times in order to find it there. Is there a way to change the preferences to simply open attachment in a new

When I download an attachment, it doesn't open in a new window. It goes to my finder, but I must click on an email attachment at least 3 times in order to find it there. Is there a way to change the preferences to simply open attachment in a new window?

http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback

Is there a way of changing the jdevappunknown_ folder that Ant deploys to?

Using Ant DeployESBSuitcase doesn't work when deploying Projects with dependencies.
Steps to re-create error:
Create a JDeveloper ESB Project called ‘ProjectB’ and add file adapter called ‘WriteFile’ to write a file. Deploy this project using JDeveloper.
Create another JDeveloper ESB Project called ‘ProjectA’ and add a file adapter called ‘ReadFile’ to read a file.
From ProjectA’s routing service add a routing rule and use ‘Browse Target Service Operation’ (Gear wheel icon) and select the deployed ProjectB_WriteFile service.
Deploy ProjectA using JDeveloper.
Use Ant to create a deploymentplan file for both projects by running the ExtractESBDeploymentPlan target.
Note: As these projects are saved under their own directory structure
C:\Workspace\Local\ProjectA and C:\Workspace\Local\ProjectB you will need to copy the ..\ProjectB\ProjectB_WriteFile.wsdl to the ProjectA folder.
Confirm that ProjectA and ProjectB Ant build files DeployESBSuitcase properties (esbMetadataServerHost and esbMetaServerPort) point to another server other than the one you have just deployed ProjectA and ProjectB to using JDeveloper. i.e. a clean server that doesn’t know about these Projects
Deploy ProjectB using Ant’s DeployESBSuitcase target.
Deploy ProjectA using Ant’s DeployESBSuitcase target.
An error is now thrown
C:\Workspace\Local\ProjectA>ant DeployESBSuitcase
Buildfile: build.xml
DeployESBSuitcase:
[echo] Deploying ESB Project ProjectA to serverx
[deployESBSuitcase] Deployment Attempt Response :
[deployESBSuitcase] <deploymentSummary>
[deployESBSuitcase] <message>Entity Deployment Failed</message>
[deployESBSuitcase] <errors>
[deployESBSuitcase] <error code="1049" severity="5">
[deployESBSuitcase] <description>WSDL "esb:///ESB_Projects/Local_ProjectB/ProjectB_WriteFile.wsdl" of service "DefaultSystem.ProjectB_WriteFile" is invalid or unaccessible. Following error is thrown by WSDL Parser : WSDL Parsing Failed: org.apache.slide.structure.ObjectNotFoundException: No object found at /files/ESB_Projects/Local_ProjectB</description>
[deployESBSuitcase] <fix>Ensure that the WSDL is accessible and valid. If the problem persists, Contact Oracle Support.</fix>
[deployESBSuitcase] </error>
[deployESBSuitcase] </errors>
[deployESBSuitcase] </deploymentSummary>
[deployESBSuitcase]
[deployESBSuitcase] Deployment Failed ...Unhandled Exception
[deployESBSuitcase] java.lang.Exception: Deployment attempt failed, please review deployment attempt response above
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:128)
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:175)
[deployESBSuitcase] at oracle.tip.esb.client.anttasks.DeployESBSuitcaseTask.execute(DeployESBSuitcaseTask.java:510)
[deployESBSuitcase] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[deployESBSuitcase] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[deployESBSuitcase] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[deployESBSuitcase] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[deployESBSuitcase] at java.lang.reflect.Method.invoke(Method.java:585)
[deployESBSuitcase] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
[deployESBSuitcase] at org.apache.tools.ant.Task.perform(Task.java:348)
[deployESBSuitcase] at org.apache.tools.ant.Target.execute(Target.java:357)
[deployESBSuitcase] at org.apache.tools.ant.Target.performTasks(Target.java:385)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[deployESBSuitcase] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[deployESBSuitcase] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
[deployESBSuitcase] at org.apache.tools.ant.Main.runBuild(Main.java:758)
[deployESBSuitcase] at org.apache.tools.ant.Main.startAnt(Main.java:217)
[deployESBSuitcase] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[deployESBSuitcase] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
BUILD FAILED
java.lang.Exception: Deployment attempt failed, please review deployment attempt response above
at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:128)
at oracle.tip.esb.client.anttasks.DeploymentHelper.deploy(DeploymentHelper.java:175)
at oracle.tip.esb.client.anttasks.DeployESBSuitcaseTask.execute(DeployESBSuitcaseTask.java:510)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Total time: 2 seconds
C:\Workspace\Local\ProjectA>
This error is thrown as ProjectB’s wsdl file cannot be found under esb:///ESB_Projects/Local_ProjectB/ProjectB_WriteFile.wsdl.
This is due to Ant deploying ProjectB under …\ESB_Projects\jdevappunknown_ rather than …\ESB_Projects\Local_ProjectB
When deploying ESB projects from JDeveloper they are created under the following structure: <Oracle_Home>\integration\esb\oraesb\artifacts\store\metadata\files\ESB_Projects\<JDev_Workspace>\<Project_Name>
However when using the Ant target DeployESBSuitcase ALL projects are deployed to the same folder:
<Oracle_Home>\integration\esb\oraesb\artifacts\store\metadata\files\ESB_Projects\jdevappunknown_
Is there a way of changing the jdevappunknown folder used by Ant deployments?
Edited by: user2000 on Apr 27, 2009 3:37 PM

James,
Following my steps above I don't get anything in the deploymentPlan for either ProjectA or ProjectB which includes a WSDL URL I can modify.
ProjectA includes the ProjectB_WrieFile.esbsv file which contains the following line:
<wsdlURL>esb:///ESB_Projects/Local_ProjectB/ProjectB_Write.wsdl</wsdlURL>
Is there something I can change which will mean when I regenerate the deploymentPlan it will include the WSDL location?
Thanks
Alistair
Edited by: user2000 on Apr 28, 2009 11:55 AM
I've included Both Deployment Plans:
ProjectA Deployment Plan
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<deploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectA_ReadFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Read" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.inbound.FileActivationSpec" name="ActivationSpec"/>
<property value="Archive" name="LogicalArchiveDirectory"/>
<property value="true" name="DeleteFile"/>
<property value=".*\.txt" name="IncludeFiles"/>
<property value="60" name="PollingFrequency"/>
<property value="0" name="MinimumAge"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
<property value="*.txt" name="UIincludeWildcard"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectA_ReadFile_RS" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<serviceDefinition>
<property value="ProjectA_ReadFile.wsdl" name="wsdlURL"/>
</serviceDefinition>
</properties>
</serviceDeploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectB_WriteFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Write" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.outbound.FileInteractionSpec" name="InteractionSpec"/>
<property value="ProjectB_%SEQ%.txt" name="FileNamingConvention"/>
<property value="1" name="NumberMessages"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
</deploymentPlan>
Project B Deployment Plan
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<deploymentPlan>
<serviceDeploymentPlan qname="DefaultSystem.ProjectB_WriteFile" status="ENABLED">
<parent type="system" qname="DefaultSystem"/>
<properties>
<jcaOperation>
<property value="Write" name="LogicalDirectory"/>
<property value="oracle.tip.adapter.file.outbound.FileInteractionSpec" name="InteractionSpec"/>
<property value="ProjectB_%SEQ%.txt" name="FileNamingConvention"/>
<property value="1" name="NumberMessages"/>
<property value="true" name="OpaqueSchema"/>
</jcaOperation>
<jcaAddress>
<property value="eis/FileAdapter" name="location"/>
</jcaAddress>
</properties>
</serviceDeploymentPlan>
</deploymentPlan>

Is there a way to change the message received in Outlook from Mavericks calender?

Hi there
I found a post discussing this whereby a user was advised to edit the ITIP.stings file in the contents of the iCal.app to change the standard message that states "To accept or decline this invitation, click the link below" etc message that an Outlook user received when getting a calender invite from Mavericks Calender.
The post is here:
Is there a way to change the standard email message?
Problem is, on Mavericks it does not have that string in that file - I've actually checked ALL the .strings files in that folder but to no avail. Did it move somewhere else on Mavericks?
On another note...this whole process is part in part moving from Entourage to Mac Mail and Calender due to Apple's (illogical) removal of the ability to sync with anything other than iCal / Mail / iCloud. So we manually moved everything across (thousands of mails and hundreds of folders) and hundreds and hundreds of calender events.
Now it syncing but herewith the problem...if I create an event and send it to someone, they receive it as the iCloud account email and not our work email (pop account with our own domain). Even then when I open it in Outlook, it has some horribly malformed address and when you accept, you get a delivery failure.
So we create a different Calender (On the Mac) and this sends 100% (except for the message in the body we'd like to change) but this does not sync with the Iphone or the iPad. Then we have to manually change the calender event to the iCloud calender and it brings up a message that its going to send the update to all the attendees...and you must choose between send via mail or send via server.
What do I do!?

Anyone? Just need to know where I can change that message and also how I can set up the icloud calender to send invites using my work email address (as configured in Mail)?

Is there a way to change the icon associated with icloud account?

Is there a way to change the icon associated with my iCloud account? It's currently a rose and i do not like it.

Welcome to the Apple Support Communities
Are you referring to your iCloud account picture or your user picture?
It looks like you are referring to your user picture. To change it, open System Preferences > Users & Groups, press the picture box and choose the user picture you want from the ones that came by default. If you want to select a different picture stored on your Mac, drag that photo onto the picture box.
If you want to change your iCloud account picture, open http://www.icloud.com and log in with your Apple ID. Then, press your name at the top right of the site and press the user picture. If you put the cursor on the picture box, you will see a button at the top of the box to change your picture

Is there a way to Change the Writing Speed When Burning CD-R's?

Is there a way to change the writing speed when burning CD-R's?
I don't see any options in Disk Utility.
Rob
P.S. Since I am burning coasters lately with the Pioneer DVR-111D, I though that I might solve the problem by using a lower write speed.

I dn't believe so with Disk Utility although you can with Roxio Toast Titanium. I would try another media brand, like Verbatim, as a first step and see if the coaster problem goes away.

Is there a way to change the Apple ID you're using on your iPhone?

I recently got an iPhone 3 and I am using my brothers ID to download apps but he won't tell me his password and its really inconvenient having to ask him to put it in every time, so I was wondering if theres a way to change the one your using as I have another on I can now use instead. Please if you have any thoughts on how to do this please tell me. Thanks

Hi,
try
Settings->Store
click on the existing appleId (your brothers), click 'sign out'. You should then be able to sign-in, but this time select 'Create New Apple ID'

Is there a way to change the ring tone to none for one particular contact?

Similar Messages

Maybe you are looking for