Is there a way to choose non-consecutive cells when performing Instant Calculations?

I know how to do an equation to add things up. I've discovered the convenience of the Instant Calculations feature where I select consecutive cells with values, then drag drop the resulting equation from the Sum in the lower left corner of my spreadheet. That works fine if I chose cells consecutively in a column,row, or select by dragging over an area. I haven't found a way to select non-consecutive cells to create a sum, with Instant Calculations, however.

hold down the <command> key while clicking non-contiguous cells

Similar Messages

  • Is there a way to choose multiple "send to" addresses at the same time?

    I would like to send mass e-mails to different people from my contact list for different topics, picking the addresses each time rather than using a group.  I have found the " + " sign for accessing the contact list, but I can't figure out how to select more than one address at a time (and then having to go back to the " + " sign to select the next contact, etc.  Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?

    Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?
    No. You can kind of do it by dragging from the Contacts app, but the default address (first in list, I think) will be used. I you have contacts with multiple email addresses, you’d have to go to each in the address field and select the correct one.

  • Is there a way to copy non-contiguous words from a PDF

    Is there a way to copy non-contiguous words from a PDF?  Is there a way to use a template or mask that will isolate certian areas to be copied with spaces in between the words so that when you go to paste the contents into multiiple fileds, the separate words will pop into the appropriate fileds.  The fields will be in a submission form.
    Please let me know if this is possible.
    Thanks
    Linda

    No it's not.

  • RH10 - WebHelp, SSL, Navigation Toolbar Options.  Is there a way to choose no default?

    I have one group that's requesting their output to have a collapsed left hand navigation pane (i.e., no TOC/Index/Gloss/Search identified as default).
    While I've shown the requestors HOW to collapse (click the "X"), they want it gone by default.  I know we could always go Traditional - No Skin.. but we could also write content in Latin, too. 
    So, is there a method to choose "None" as the default toolbar for a defined Single Source Layout (even outside the WebHelp Options GUI)?

    Yes there is but you'd have to ensure your content has the necessary navigational links to enable users to get around the content without a TOC, index or search. In the WebHelp SSL click on the Navigation dialog and deselect all the toolbar butons.

  • My ipad kept on automatically preferring HSDPA even if a 3G signal is available. is there a way to choose signals manually so i can prefer the 3G signal?

    my ipad mini kept on preferring HSDPA signal even a 3G signal is available. is there a way to choose the signal manually so i could prefer the 3G to avoid slower internet connection?

    The iPad uses AirPrint technology to print to a printer. Check this Apple support page to see if your printer is listed as being AirPrint compatible.
    http://support.apple.com/kb/ht4356
    If your printer works with AirPrint you will need a Wi-Fi network in order to connect. That Wi-Fi network does not need to be connected to the Internet. As James Ward4 says, you'll need a Wi-Fi router to set up your network. Most routers require that a computer be used during the setup process. Perhaps you could use someone's computer to do the setup if you do not had one yourself. Once the router is set up you should be able to print.

  • Is there a way to choose the size of a picture, using iPad 2?

    Is there a way to choose the size of a picture, using iPad 2?

    Choose picture size using 3rd party apps?

  • Is There Any Way To Choose To Sort By Name and Pick a Background Color in Finder?

    Is There Any Way To Choose To Sort By Name and Pick a Background Color in Finder?  I've noticed in Finder's View Options that I cannot choose to sort by name and have a background color in icon view.  I've done a search in discussions and someone else mentioned this as well.

    To sort by name.....
    Open the finder window, then select the "change the item arragement" button.  Choose name from the drop down.

  • Is there a way of choosing ONLY vertical or horizontal?

    Hi,
    Is there a way of choosing only the vertical shots, or horizontal shots?
    Thanks!

    Use the Sort: Aspect Ratio option and all horizontal/vertical images will be grouped.

  • When using two iPhones (iOS 5) on the same computer/iTunes Is there any way to choose which songs, contact info., etc. are sync'd to each device?

    When using two iPhones (iOS 5) on the same computer/iTunes Is there any way to choose which songs, contact info., etc. are sync'd to each device?

    For each iPhone...
    From the Summary tab select:  Sync only checked songs and videos.
    Under Options in the Summary tab select:  Sync with this iPhone over Wi-Fi
    If you want you can select: Manually manage music and videos.
    Select the music you want synced from your iTunes library, same with Contacts.

  • HT201317 Is there a way to CHOOSE pictures that you want to be in Photo Stream?

    Is there a way to CHOOSE pictures that you want to be in Photo Stream?

    mende1...how do you do that?  i didn't know i had any control over which pictures i could have in photostream. in fact, that's the very reason I am writing this question.  could you help?

  • Is there a way to Change the Writing Speed When Burning CD-R's?

    Is there a way to change the writing speed when burning CD-R's?
    I don't see any options in Disk Utility.
    Rob
    P.S. Since I am burning coasters lately with the Pioneer DVR-111D, I though that I might solve the problem by using a lower write speed.

    I dn't believe so with Disk Utility although you can with Roxio Toast Titanium. I would try another media brand, like Verbatim, as a first step and see if the coaster problem goes away.

  • Is there a way to create an AUDIO alert when my MacBook Air (Mavericks) battery runs low (say 10%)?

    Is there a way to create an AUDIO alert when my MacBook Air (Mavericks) battery runs low (say 10%)?  I often miss the visual power percentage in the top bar, so would like an audio alert as well.

    For global alerts, yes:
    There is no need to do anything before the alert appears, and the MBA will not lose data should it go to sleep. If it goes to sleep at 0% you still have several hours to plug it in before it shuts down.
    I wouldn't even bother displaying the percentage value.

  • When i send a PDF file to out side print, some of the things I aded dose not print. Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

    when i send a PDF file to out side print, some of the things I aded dose not print.
    Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • Is there a way to prevent music from autostarting when connected to bluetooth

    Is there a way to prevent music from autostarting when connected to bluetooth
    Mike

    When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.

  • Is there a way to adjust the frame length when using a FFT

    Is there a way to adjust the frame length when using a FFT?
    Thanks,
    David

    I thought that to have a longer frame rate you just need to have a longer sample set.

Maybe you are looking for

  • Can anyone actually answer this?

    Hi, I'm Mike Federali. For about a year now I have been looking to get iTunes to pick up my music for their online store. I DO NOT want to go through an outside source like CD Baby, etc. Frankly, I just don't trust sites like that. I've been involved

  • SQL Tuning using Enterprise manager in oracle 10g

    Hi, In oracle 10g you have the enterprise manager which can be used to tune sql statements using the SQL Tuning ADvisor and SQL access advisor. I believe in oracle 10g the process of SQL Tuning is slightly easier using the Enterprise Manager ...so if

  • I need help in understanding the customization of Landscape in R/3.

    I need help in understanding the customization of Landscape in R/3. Setup of SAP Landscape from an SAP SD point of view. Being as SAP SD consultant what would be my role in customizing the Landscape server. Help needed. Thx

  • How to open homepage on all opened tabs

    Hello, I am new to Safari and I downloaded the Windows ver. and ended up liking it a lot more than Firefox and IE. But one thing is bothering me is that I can't seem to know how or if it's even possible to open new tabs (not windows) and showing my h

  • R3Load Unicode Export

    How do I confirm that R3Load has done a unicode conversion in the db export? I have run all the pre unicode conversion tasks, and SAPINST to do the db export. Is there a way to confirm that the conversion has occured on my export files before I blow