Is there a way to clean up the old alerts in OEM 10gR2?

I seem to have alot of older alerts on my oem main page:
OEM >Database > Home about half way down Alerts. Some of them are Informational, and are cleared on the database, yet they still show in oem. Is there a way to remove these? I'd like to see only active alert messages, not historical ones. Thanks
Bob

But if you do recieve alert and you reset them, then they should not appear on your list any longer. I have some alerts showing up under CRITICAL when I had a file system go from CRITICAL to no alert (due to changing the threshold) . Any I can't make the alert disappear. I have a SR openned on this problem. I am curious as to what they have to say.
Also I have alerts that appear under ALERTS/Errors from October, that will not go away, even though the problem has been cleared up for months.......

Similar Messages

  • If you have an itunes acct that was not set up to share and the lap top it was on is no longer working, is there a way to open up the old itunes acct to get music and photos?  This was before icloud was available, can you reset your password?

    If you have an itunes acct that was not set up to share and the lap top it was on is no longer working, is there a way to open up the old itunes acct to get music and photos off of it?  This was before Icloud was available.  Can you reset your itunes password somehow?

    iTunes and the iTunes Store won't have anything to do with your photos. Those would be stored only on your laptop unless you made a backup of some sort. If you didn't, and the hard drive in your laptop has failed, then your photos are gone unless you wish to pay a disk recovery service a lot of money to try and get them back.
    As to your music, if you purchased it from the iTunes Store you can probably re-download it. Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time. You can see what content you can download here:
    http://support.apple.com/kb/HT5085
    You can also re-download content using an iOS device.
    For full instructions, see:
    http://support.apple.com/kb/ht2519
    Regards.

  • After installing FF 5.0 I am receiving a list of incompatible Add-Ons. I go into 'Extensions' and click to remove them, exit FF and lauch FF again, the same incompatible add-ons list appears. Is there a way to permanently remove the old Add-ons?

    After installing FF 5.0 I am receiving a list of incompatible Add-Ons. I go into 'Extensions' and click to remove them, exit FF and lauch FF again, the same incompatible add-ons list appears. Is there a way to permanently remove the old Add-ons?

    Thanks but I don't think this will help. Like I said, all of my add-ons were working fine and compatible until after running a previous version of FF. I am sure they are still compatible, but they are not working at all.
    I even checked my profile folder and all of the extensions' data is all still there but FF5 is just not reading it correctly. (like adblock plus... I see the folder for it but FF5 doesn't have it on the add-on manager page when I run FF5)

  • Is there a way to clean under the keys

    I spilled on the keyboard and was wondering if there was a way to clean under the keys?

    Try youtube,  there are plenty there.
    At your own risk.

  • My newest iMac from a year ago is showing signs of slowing down its processing capability. Notice it especially in Aperture where I get the whirling dervish thing sometimes for a minute or more and once it crashed. Is there a way to "clean up the system"?

    My newest iMac from a year ago is getting very sluggish. I notice it particularly in Aperture. I get the whirling dervish thing going on an operation sometimes for many seconds, even a minute or more and once it just crashed and I had to restart with the button. So I'm wondering if there is some way to "clean up the system" that is built into the iMac or if there is a reliable app I can obtain that will clean things up. I'm supposed to have a super fast processor in this version of iMac and lots of hard drive space and RAM. What gives? Any suggestions?

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • Is there any way I can get the old iPhone calendar (design)?

    When I upgraded to iOS7 I immediately wasn't a fan of the calendar (you now have to scroll down to see what's happening on any given day, instead of the convenient snapshot view like in the old calendar). I was willing to chalk it up to change and give it a try but months later I still hate the calendar. Is there anyway I can just get the old calendar version back... via app or anything? 

    Apps that people seem to recommend a lot include Tempo and Fantastical. Week Cal also has a view like the old month view.

  • Is there a way to bring back the old Expose?

    the main reason I loved expose was that you can move files between files with expose open.
    I'm an art director so I'm constantly dragging images from one photoshop file to another, or from one window into a photoshop file, and expose made this really easy to do. I could click on a layer or file, initiate expose and drag said file or layer to a new window or document.
    Now mission control is straight up pointless, other than just showing what windows are open it serves no purpose. I can't drag files between windows or open photoshop documents anymore, you can't click on a file and start to drag then double tap on your mouse to launch it.
    It really is a BIG flaw in lion. Everything else is great but why would Apple remove such a powerful tool entirely?
    Why no leave the option in to turn it back on like the old school scrolling (which is better as well)
    Come on Apple!

    Currently, the only way to get the old behavior of spaces back is to reinstall snow leopard. I am personally unaware of third party solutions, but that doesn't mean there aren't any.

  • Is there a way to revert to the old email style?

    I have several email accounts loaded. The new setup shows me everything twice. Why? Then, it also rolls everything up into one. Why? They are separate email accounts for a reason.
    So now when I open my email instead of seeing:
    email1: 5
    email2: <blank>
    email3: <blank>
    I see
    all: 5
    inbox1: 5
    inbox2: <blank>
    inbox3:<blank>
    email1: 5
    email2: <blank>
    email3: <blank>
    This is seriously stupid. Do the developers or the development managers not think things through? Why would I need to see every mailbox twice?
    I'm sure there are those who will love this new design for some reason, but please, let those of us who find it stupid and useless revert back to the old way.

    I have no idea how you think
    account1
    account2
    account3
    account1
    account2
    account3
    isn't duplicating information. I don't have unread emails anywhere but the inbox, so the numbers are always going to be the same. Maybe you do. We're not all you. We're not all me. It makes no sense to assume that we all work the same way. Giving the users a way to configure the apps is pretty obvious. Anyone who doesn't understand that shouldn't be developing software.
    Another example is that they're forcing the Notes app to exchange the data with my email accounts instead of leaving it on the iPod, where I want it. It's picking an email account at random from my three listed accounts, and I have no configuration options to tell which account to use, or, to use none of them at all. The constant synchronization over the wifi is making the app unusable. Do you see why configuration is necessary?

  • Whenever I try to delete or change a contact, the old name and number still appears. Is there a way to fully delete the old information?

    Say if I changed the mobile number for "John Smith". If I go to my contacts or messages and type in "John Smith" both the old and new numbers appear. As you can image, this becomes very confusing. And sometimes I'm deleting contacts for a reason, I don't want my phone to remember it. How can I actually delete a contact or change the information?

    That will clear up on its own but will take 3-5 days to do so.  Try again in a few days.  In the meantime, you can manually back up to your computer using iTunes by clicking Back Up Now on the Summary tab of your iTunes sync settings.

  • Is there a way to clean up the Timesheet tables in MS Project 2007 before I migrate to 2013?

    Hi All
    I'm attempting to migrate an instance of project server 2007 over to 2013.  The problem is that it failes on the convertto process when combining the 4 2010 databases into a single 2013 database.
    Reading through the logs it appears to be an issues with an invalid Foreign Key in the MSP_TimesheetProjects table.
    On investigation I find that the 2007 Timesheet tables in the Reporting database have a number of invalid entries.  We don't use the timesheeting system in that particular instance so there should not be any entries at all.  There are however a
    couple to projects in the TimesheetProjects table, as well as a few tasks and timesheet lines, even though there don't appear to be any timesheets.  I have run a delete on all timesheets in the system, and have rebuild the Reporting database by restoreing
    custom fields, but I can't seem to shift them.
    If anyone has any ideas, I'd appreciate the help.
    John

    Hi John,
    What I'd suggest would be to refresh the 2007 reporting DB. See the procedure below:
    Logon to Project Web Access with Administrator credentials
    Select Administrative Backup from the Database Administration secton on the Server
    SettingsPage in Project Web Access
    In the Items for Backup section of the Backup page,
    select the checkbox for Enterprise Custom Fields and then click the Backup button and click the OK button
    when prompted by the system
    Select Administrative Restore from the Database Administration secton on the Server Settings Page in Project Web Access
    Choose Enterprise Custom Fields from the Choose Item selector on the Restore page
    Click the Restore button and then click the OK button
    when prompted by the system
    See reference
    here.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Is there a way to turn off the message alert "Cellular data is turned off for _____"?

    I turned off cellular data for about half of my apps so I don't go over my data limit (Thanks AT&T). Now every time I open these apps a message alert pops up saying "Cellular Data is Turned Off for _____. You can turn on cellular data for this app in Settings" And it gives two buttons, "Settings" and "Ok".
    If it were only a few times, I wouldn't care about closing this message. But now that I have to do it like 20-30 times a day, it has become SUPER ANNOYING. Seriously Apple, how do I turn your stupid message off??? I TURNED OFF MY CELLULAR DATA FOR A REASON, please stop reminding me of what I already know.
    AND the worst part is, when that message pops up it locks the phone so the home button doesn't work. Pretty lame software feature in my opinion.

    There is a fix for this!  I was about to jailbreak my phone to cure this issue, but found the answer on another thread.
    Go to settings/notification center.  Select the app in question and turn the slider for "allow notifications" to ON.  Turn off the sliders below for sounds, etc. Now it shows up in the notification center separately  (or seemingly not at all) and not on your screen when you switch to the app.  Good luck!

  • HT1535 I just downloaded the latest version of iTunes. Now I am unable to purchase songs on iTunes and I can't sync my iPhone to my computer. Is there a way to revert ot the old version of iTunes (when I had neither of those two problems)?

    I just downloaded the latest version of iTunes (11.0.4). Now I both unable to make purchases on iTunes and unable to sync my iPhone with my computer without restoring it to factory settings (which will erase my data). Is there someway to revert back to 11.0.3 version of iTunes?

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing and follow the instructions.

  • I have been using firefox since the beginning on my Mac G-5 until today when I was asked to upgrade my browser I did so and now I can't geet firefox as my browser anymore. I s there a way to reset to the old version? I really enjoyed using Firefox.

    I can no longer get Firefox to work on my Mac G5 computer since I excepted the last suggested upgrade today. Now it says that it is not supported by this computer. I would like to know where to go to get the older version that I had been using 9.0.1 is not working for me.

    Beginning with Firefox 4, Macs must have an Intel x86 processor ('''''yours is a PPC Mac''''') '''''<u>and</u>''''' OSX 10.5 or higher ('''''which you do not have''''').
    *System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8] [https://www.mozilla.org/en-US/firefox/9.0/system-requirements/index.html Firefox 9]
    '''''The good news''''' is that Firefox 3.6.x still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
    *System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
    *Download Firefox 3.6.x: https://www.mozilla.org/en-US/firefox/all-older.html
    *Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
    You can try the third-party product '''''TenFourFox''''' that supports PPC Macs with OSX 10.4.11 and OSX 10.5.8. Firefox 9 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
    *Home page: http://www.floodgap.com/software/tenfourfox/
    *Developer's blog: http://tenfourfox.blogspot.com/
    *'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/ReleaseNotes90
    *'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Is there a way to clean the javascript cache of files in layouts folder?

    Is there a way to clean the javascript cache of files in layouts folder?
    If I deploy a new version of the solution after some changes in javascript file which is deployed to the layouts folder the old version is used. The only fix I have found so far is to change the URL of the javascript file with some fake querystring like
    "?v=2". But this requires another deployment. So I am asking for an alternative approach.

    hi Nikolay,
    there is no clean solution for your problem. Browsers cache files by url, you can avoid caching appending in query string unique value per deployment. For example
    _layouts/my_js_file.js?v=<current date> - will be refreshed from cache when day changes
    _layouts/my_js_file.js?v=<GUID> - if guid is generated on every request, this file should never cache
    _layouts/my_js_file.js?v=<product version> - more preferable solution, browser will update cache on every new version that was deployed
    Actually, ScriptLink should take care about this, internally it has a method that appends unique id into query string based on js file content, if content changed, hash is also changed and new unique id is generated.
    Check Below link for more information
    http://sharepoint.stackexchange.com/questions/57874/how-to-avoid-caching-issue-when-using-custom-javascript-and-css-deployed-under
    You can also check this link
    http://www.sharepointnutsandbolts.com/2011/11/avoiding-bugs-from-cached-javascript.html
    Please mark the Answer and Vote if it will help to resolved your issue

  • Hi, I just started a new movie and the program is running very slow. Is there a way to clean up my iMovie program so that it goes faster? Please help.

    Hi, I just started a new movie and the program is running very slow. Is there a way to clean up my iMovie program so that it goes faster? Please help.

    There is nothing you can do with iMovie program itself.  Slow response in usually due to a shortage of system resources (CPU, RAM and disk space).
    How much free disk space do you have on your boot drive and what is the capacity of the drive?
    You can check memory utilization while running iMovie using Activity Monitor (in Applications/Utilities).  What does the Memory tab show for Swap used?
    Are you running many other processor-intensive applications a the same time?
    If you have a lot of events and projects, it will help a bit to hide the ones you are not using by moving them from your iMovie Projects and iMovie Events folders into an enclosing folder so iMovie doesn't load them.
    Geoff.

Maybe you are looking for