Is there a way to combine multiple tables/sheets into one file?

In Excel if add more than one sheet you have tabs at the bottom that you can click on and name. Does Numbers have something similar? I searched support and even googled the question but couldn't really find an answer. I appreicate any help!!!
Thanks!!

More a vocabulary issue than anything else, although the underlying models are somehwat different.
A Numbers document must have at least one Sheet, the large canvas on which other objects are placed.
Every Sheet starts with one Table on it. You can add several tables to a Sheet. Usually hese are (relatively) small, single purpose tables, typically used to perform calculations on the contents of the main table, to hold data used by the main table, to extract data from the main table for use in a Chart, or for other purposes. As each Table is added, its icon is added to the list, under the Sheet to which it was added. Tables can be moved to a different sheet by dragging their icons in the Sheets list. umbers aoutomatically updates all formulas to fit the new location.
Charts can be added to a Sheet by selectng the data to be graphed, then choosing the chart type from the Charts button in the Toolbar. An icon for each chart is added to the list (under its Sheet) as the chart is created.
When you add a Sheet to a Numbers document, that Sheet's icon appears in the Sheets list to the left of the working area (where the active Sheet and its contents are displayed). Charts can be moved to a differet Sheet by dragging their icons.
Other objects (Text boxes, graphics objects) can also be added to the Sheet. No icons appear for these.
The list of items for each Sheet can be collapsed (by clicking the disclosure triangle beside the Sheet name), hiding the Table and Chart names, and leaving only the Sheet name and icon showing in the Sheets list.
Only one sheet may be viewed at a time. To switch between sheets, click the icon of the Shhet to which you want to go, or click the icon of an item on that sheet to bring the sheet to the front with the clicked item on the screen.
For more detail, and a better introduction to Numbers, I'd recommend reading at least the first four chapters of the Numbers '09 User Guide, available through the Help menu in Numbers, or from this page.
Regards,
Barry

Similar Messages

  • HT1918 Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

    Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

    No. Unfortunately, you can't combine Apple IDs togetehr, even if you own them all.

  • HT201340 Is there a way to combine all my libraries into one library on Aperture?

    I have pictures all over the place on my mac and would like to put them all in one library and delete the other locations.  Is there any easy way to do this?

    This might work, depending.....
    http://www.tonton-pixel.com/blog/json-photoshop-scripting/json-utility-scripts/combine-adj ustment-layers/
    some more info:
    http://www.gregapodaca.com/photoshopmechanics/files/008.html

  • Is there a way to combine multiple pages into a single document?

    In the program "Pages," is there a way to combine multiple pages in a single document?

    Jean Louis Gassee, who used to be a senior Apple executive, wrote on Apple's bad approach to the latest iWork suite:
    https://discussions.apple.com/message/25209121#25209121
    Peter

  • Is there a way to combine multiple files that were scanned individually into one?*

    Is there a way to combine multiple files that were scanned individually into one?*

    Assuming the scans are all PDFs, here is one easy way:
    Open the first PDF in Preview.
    Duplicate (File > Duplicate) if you want to preserve the original.
    Choose View > Contact Sheet.
    Drag and drop the other files from the Finder into the Contact Sheet window. You can select the files one at a time or multiple files at once.
    Arrange the contact sheet icons in the desired order.
    Save.

  • Is there a way to create multiple BQY output to one of the Job File ?

    Hello,
    I am using EPM11.1.2.3.501 version.
    BQY report due to the large amount of data, it is difficult to use a WebClient.
    So will share on a quarterly basis.
    However,
    If modifications are to occur,There are difficulties must modify each file.
    For example,
    Register 2014 1Q, 2014 2Q, 2014 3Q, 2014 4Q BQY Job file.
    When you run the job, the output of the job file is created.
    If the job file is changed, you must modify all four files.
    This will be only grow ations.
    Is there a way to create multiple BQY output to one of the Job File ??
    Please help me.
    Thanks

    It is not possible to have multiple BQY outpu into a job file.
    Thanks,
    KK

  • Is there a way to move multiple Calendar items from one date to another?

    Hello. I have far too many Calendar items every day in my iCal. Until I finally pare them down to a reasonable level, I need to "reschedule" all of my unfinished ToDo items and reminders, to another day, later in the week.
    There doesn't seem to be any "Select All" feature available.
    Is there a way to move multiple Calendar items from one date to another?
    Thanks in advance!

    Still no ideas? Apple, please come up with a fix. Thanks.

  • Is there a way to combine their query results into a single function

    say I have a bunch of functions that return a query:
    <cffunction name="getDeals" access="remote"
    returntype="query">
    <cffunction name="getDeals2" access="remote"
    returntype="query">
    is there a way to combine their query results into a single
    function that returns a struct of the various results?

    Umm, it's probably more suited to an array - effectively
    making it into a list of queries. You'd then loop the array and
    output each.
    I use a similar approach when creating system messages to the
    user. Most of my functions that are called do their bit, then at
    the end call another function I call "messages". This function
    grabs whatever my function sends and appends it to a messages
    array.
    This way enables me to output a long list of messages -
    because I could be calling several functions at the same time. If I
    just output a message from each function, each one would overwrite
    the other. So I'd get one message at a time.
    Immediately after it's output, I then destroy the message
    array so that old messages aren't kept inside of it.
    Mikey.

  • Hello Apple community... I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.

    I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.  When I drag the doc in a line would show up in the past, and if I went above th eline all was good.  It doesn't have a line, and no matter what I try I am having no success.
    Please help!

    According to an Apple Support article, unless there are unforeseen issues
    in file ownership or permissions, the combining of .PDFs should be simple.
    •OS X: Combining PDF documents using Preview - Apple Support
    There are a few variable and similar methods, some change with version
    of OS X in use; some vintage OS X may vary a little in the process...
    A variety of similar topics appear in search results, with terms:
    " mac os x combine pdf into one " such as this page shows...
    https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
    If the system is older than Mavericks there may be other methods to try.
    Suggestions are among linked results in the search. I see a few fair ones.
    •Here's another that offers generally similar suggestions...*  this info looks OK, extra links, do not:
    http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
    { note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
    If you have a problem after trying other methods, based on an OS X
    your computer is running, post back with more exact information...
    Good luck & happy computing!
    edited

  • Is there a way to mix down your tracks into one so you can have more tracks to use

    Is there a way to mix down your tracks into one so you can have more tracks to use

    Here is my tutorial to bounce tracks
    http://ipad.slapwagon.co.uk/
    some quality is lost due to export compression, but it's bareable considering you don't need to connect to a pc or use itunes...
    cheers
    @zorin

  • Is there a way to send multiple pdf's in one email from iBooks?  I have several that I've saved that I need to send to one person. If it can't be done directly, is there a work around?

    Is there a way to send multiple PDF documents from iBooks in one email?  I have several that need to be sent to one person and can't figure out how to send more than one at a time. If you can't, is there a workaround?

    Warehouse that PDF on your own server, then link to it from your book.
    Ken

  • Is there a way to acknowledge multiple ical notifications at one time?

    I turned on an iBook I haven't used is almost 2 years.  ical popped up reminders from two years ago.  Is there a way to acknowledge these reminders all at one time?

    Filter the mail based on mail addressed "To: (Your email address). The action is to send it to  the "trash " folder. In effect, the trash folder automatically becomes your Inbox. Save what you want by moving items from trash. Then touch "edit" "delete all".

  • Is there a way to merge several iCal calendars into one?

    Anyone know if there is a way to merge several iCal calendars into one Calendar? I've separated a few different calendars for things and want to merge all of those events into one universal Calendar. I asked Apple Support and they stated there isn't a way to do this. So, I'm throwing this out there in case someone knows a way.
    Thank you!

    Found the answer after troubleshooting on my own. I was able to do this on a PC by using Office 2007 and the calendar in there. I also had to setup Mobile Me to the calendar on my PC which was fairly easy.
    What you'll have to do is have Mobileme sync your calendar data with Outlook.
    Then after they sync in Outlook... manually select each imported calendar, choose to view all appointments, select all (to select all of your events), copy, then paste them into the main "Calendar".
    Follow this step for all of your calendars and it works like charm.
    The only thing left to do after you've copied them all is to delete the old calendars after you have all of the events copied.
    This may be able to be done in iCal too using similar methods, however it was really easy for me to do it in Windows with Outlook 2007.
    Just keep in mind that you want to view all events from each separate calendar and just copy those into your main calendar.

  • BPM: Multiple IDOC collect into one file

    Hi
    I have done collecting multiple IDOCs of same type into one file using BPM
    I have used the following blog which is collecting different types of IDOCs.
    IDOCs (Multiple Types) Collection in BPM
    But i have done collecting of IDOCs which are same type.
    Source side it is showing successful and its reaching to BPM also . But in target i am not getting any file. Could any one please help me how to check where exactly I am failing.
    Thanks & Regards
    Sowmya

    Check whether the Outbound Status is successful or not in sxm_moni. Is there any message created from Integration Process to receiver File system.
    Check this
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a22ce8-8e72-2b10-3fba-e9511c6f0b8b
    Regards,
    Prateek

  • How to add the records of 2 internal table records into one file

    hello experts,
    My scenario is...
    I am retrieving the data for the for the credit, debit and trailer records of the customer into 3 different internal tables and finally i have to append all those records into one file first debit records then credit records finally the trailer record.... how to do that can anyone give some idea plzzzzzzzzz..
    Plz its bit urgent..
    Thanks a lot for your anticipation
    SRI

    Hello,
    Do like this.
    " Assume u have three itab.
    "Itab1 - debit
    "Itab2 - credit
    "Itab3 - Credit.
    REPORT ZV_TEST_SERVER .
    *PARAMETERS: P_FILE TYPE STRING."RLGRAP-FILENAME.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                  =
        FILENAME                      = P_FILE
    *   FILETYPE                      = 'ASC'
       APPEND                        = 'X'  " Check here
    *   WRITE_FIELD_SEPARATOR         = ' '
    *   HEADER                        = '00'
    *   TRUNC_TRAILING_BLANKS         = ' '
    *   WRITE_LF                      = 'X'
    *   COL_SELECT                    = ' '
    *   COL_SELECT_MASK               = ' '
    *   DAT_MODE                      = ' '
    * IMPORTING
    *   FILELENGTH                    =
      TABLES
        DATA_TAB                      = ITAB1
    * EXCEPTIONS
    *   FILE_WRITE_ERROR              = 1
    *   NO_BATCH                      = 2
    *   GUI_REFUSE_FILETRANSFER       = 3
    *   INVALID_TYPE                  = 4
    *   NO_AUTHORITY                  = 5
    *   UNKNOWN_ERROR                 = 6
    *   HEADER_NOT_ALLOWED            = 7
    *   SEPARATOR_NOT_ALLOWED         = 8
    *   FILESIZE_NOT_ALLOWED          = 9
    *   HEADER_TOO_LONG               = 10
    *   DP_ERROR_CREATE               = 11
    *   DP_ERROR_SEND                 = 12
    *   DP_ERROR_WRITE                = 13
    *   UNKNOWN_DP_ERROR              = 14
    *   ACCESS_DENIED                 = 15
    *   DP_OUT_OF_MEMORY              = 16
    *   DISK_FULL                     = 17
    *   DP_TIMEOUT                    = 18
    *   FILE_NOT_FOUND                = 19
    *   DATAPROVIDER_EXCEPTION        = 20
    *   CONTROL_FLUSH_ERROR           = 21
    *   OTHERS                        = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                  =
        FILENAME                      = P_FILE
    *   FILETYPE                      = 'ASC'
       APPEND                        = 'X'  " Check here
    *   WRITE_FIELD_SEPARATOR         = ' '
    *   HEADER                        = '00'
    *   TRUNC_TRAILING_BLANKS         = ' '
    *   WRITE_LF                      = 'X'
    *   COL_SELECT                    = ' '
    *   COL_SELECT_MASK               = ' '
    *   DAT_MODE                      = ' '
    * IMPORTING
    *   FILELENGTH                    =
      TABLES
        DATA_TAB                      = ITAB2  " Check here
    * EXCEPTIONS
    *   FILE_WRITE_ERROR              = 1
    *   NO_BATCH                      = 2
    *   GUI_REFUSE_FILETRANSFER       = 3
    *   INVALID_TYPE                  = 4
    *   NO_AUTHORITY                  = 5
    *   UNKNOWN_ERROR                 = 6
    *   HEADER_NOT_ALLOWED            = 7
    *   SEPARATOR_NOT_ALLOWED         = 8
    *   FILESIZE_NOT_ALLOWED          = 9
    *   HEADER_TOO_LONG               = 10
    *   DP_ERROR_CREATE               = 11
    *   DP_ERROR_SEND                 = 12
    *   DP_ERROR_WRITE                = 13
    *   UNKNOWN_DP_ERROR              = 14
    *   ACCESS_DENIED                 = 15
    *   DP_OUT_OF_MEMORY              = 16
    *   DISK_FULL                     = 17
    *   DP_TIMEOUT                    = 18
    *   FILE_NOT_FOUND                = 19
    *   DATAPROVIDER_EXCEPTION        = 20
    *   CONTROL_FLUSH_ERROR           = 21
    *   OTHERS                        = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                  =
        FILENAME                      = P_FILE
    *   FILETYPE                      = 'ASC'
       APPEND                        = 'X'  " Check here
    *   WRITE_FIELD_SEPARATOR         = ' '
    *   HEADER                        = '00'
    *   TRUNC_TRAILING_BLANKS         = ' '
    *   WRITE_LF                      = 'X'
    *   COL_SELECT                    = ' '
    *   COL_SELECT_MASK               = ' '
    *   DAT_MODE                      = ' '
    * IMPORTING
    *   FILELENGTH                    =
      TABLES
        DATA_TAB                      = ITAB3 " Check here
    * EXCEPTIONS
    *   FILE_WRITE_ERROR              = 1
    *   NO_BATCH                      = 2
    *   GUI_REFUSE_FILETRANSFER       = 3
    *   INVALID_TYPE                  = 4
    *   NO_AUTHORITY                  = 5
    *   UNKNOWN_ERROR                 = 6
    *   HEADER_NOT_ALLOWED            = 7
    *   SEPARATOR_NOT_ALLOWED         = 8
    *   FILESIZE_NOT_ALLOWED          = 9
    *   HEADER_TOO_LONG               = 10
    *   DP_ERROR_CREATE               = 11
    *   DP_ERROR_SEND                 = 12
    *   DP_ERROR_WRITE                = 13
    *   UNKNOWN_DP_ERROR              = 14
    *   ACCESS_DENIED                 = 15
    *   DP_OUT_OF_MEMORY              = 16
    *   DISK_FULL                     = 17
    *   DP_TIMEOUT                    = 18
    *   FILE_NOT_FOUND                = 19
    *   DATAPROVIDER_EXCEPTION        = 20
    *   CONTROL_FLUSH_ERROR           = 21
    *   OTHERS                        = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    If useful reward.
    Vasanth

Maybe you are looking for