Is there a way to communicate across subnets with the GPIB-ENET/100?

I have a GPIB-ENET/100 that I am using. It is sitting on my engineering subnet. My PC is sitting on my corporate subnet and I am trying to communicate between the two. I can ping the device from my PC but the MAX cannot discover it. I noticed there is a message saying that this utility will only discover devices on the same subnet but was wondering if there has been any work arounds done or s/w upgrades available that will allow this to work?

MAX will certainly not discover it because it does so by sending out a broadcast packet and routers between subnets are designed to ignore broadcast packets (rightfully so, otherwise all broadcast packets from every subnet in the world would propogate over the entire internet).
I believe that you will be able to get this working by manually specifying the IP address (or hostname) of the GPIB-ENET/100 once you have it setup in MAX. If it is setup as, say, GPIB0, right click on that in MAX, go to Properties, and go to the Network Settings tab. In that field you can specify whatever IP Address/hostname you'd like. As the text points out, you cannot auto-discover using the "Search" utility since you are on a different subnet, but if you know your ENET/100 IP add
ress then you should not need that.
Let me know how this goes.
Scott B.
GPIB Software
National Instruments

Similar Messages

  • Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number?

    Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number? Or how can I find out who owns it?

    No. Turn it into the military police.

  • Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

    Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

    You should ask in InDesign
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I just bought a new laptop because my old one died.  is there any way to sync my phone with the new machine and not lose all my data?

    i just bought a new laptop because my old one died.  is there any way to sync my phone with the new machine and not lose all my data?

    Copy everything from your backup copy of your old computer to your new one.
    Then sync.

  • Is there a way to backup a PC with the Time Capsule?

    Is there a way to backup a PC with the Time Capsule?

    Yes, but unfortunately not with Time Machine. You could; however, use any PC backup product that supports network drives as a destination for their backups. One such product is Genie9's Genie Backup Manager Home.
    Genie9 offers a similar option for Time Machine for PCs, called Genie Timeline Home. It is advertised to support backups to "NAS and network storages," but several folks who have this reported that it wasn't able to backup to a Time Capsule. If you decide to give either Genie9 product a try, please be sure to give their trial versions a go to make it works for your situation.

  • Is there a way to play itunes music with the computer shut?

    Is there a way to play itunes music while the computer is shut?

    Not without either an external monitor and keyboard, or using a hack. If you want to try an hack app, look into:
    http://www.macupdate.com/app/mac/22211/insomniax
    Use at your own risk.
    Regards.

  • Is there a way to delete all events with the same title (not added as reoccurring) without deleting one at a time?

    i currently have a calendar synced that has events scheduled in perpetuity, scheduled as individual events.  I would like to delete all events with the same title.  I do not want to delete the entire calendar nor do I want to go into every event and delete individually.  These were not scheduled by me so I do not know how they were added one by one and go on forever but they are NOT scheduled as reoccurring and thus must be modified individually.
    I can do a search and find all events, is there a way to just delete all events with the same title all at once?
    this is a Microsoft outlook synced calendar and I am seemingly unable to delete the events all at one time from Microsoft as well. 
    Please help!

    If you still have access to the Outlook calendar in Outlook, I would delete them from there. There are a number of ways to do that, but if you open the individual event in Outlook, does it show a repeating pattern? If not, then you may have to delete them individually, but that is not that difficult either. Go into the calendar and then change the view to a list view. From there you can sort the view according to subject. This should bring all of these same appointments together in the list and you can select the group in Outlook and delete them. Once you do that, you can change your view back and then sync the phone. That will remove the events from the phone.

  • Is there a way to gift an app with the billing method as store credit

    I want to gift 4 apps to my friend but i dont have a credit/debit card becuase im a kid. Is there a way to gift the apps when the billing method is store credit like a itunes giftcard?

    No.
    You CANNOT gift using your balance AT ALL.
    No matter how you ask;  you cannot gift with your balance.
    You can use your balance for your own purchases only.

  • Is there a way to make movies open with the same screen size and position?

    Hello, I'm a new mac guy having just bought an i-mac a few months ago.
    I have a bunch of saved movies that open in quick time. Each time I open a separate movie by double clicking the file, the window opens in the upper right hand corner in a fairly small window. I must then drag the window size and location to a much larger size. I do this every time.
    I saw under quicktime, preferences, a section about preferences for full screen. This seems to work one time, for that movie, but all subsequent movies (even in full screen) or their same size.
    Is there a way to make the window size and/or location permanent?
    Thanks.

    this would have seemed like an easy thing to do but i've had no luck; one more attempt at a solution?

  • Is there a way to change usage right with the SDK?

    Working on a web application that populates a PDF form based on interview questions using a third party tool. Everything works correctly except when there is a signature field on the form. Looking at the document properties, the Signing right has been changed from allowed before data population to not allowed after data population. Is there a way to reset this right back to allowed using the tools in the SDK?
    Thanks,
    Chuck

    Next question, if AFORMAUTLib is used to populate the data, instead of the third party tool, and the filled out PDF is written out to a memory stream to be displayed in the browser, would this change the rights of the document?
    Thanks for your help.

  • Is there a way to "stamp" PDF files with the purchaser's email address?

    I would like to sell PDF reports and/or eBooks via BC, but I would like to be able to stamp each such PDF/eBook with the purchaser's email address.
    There are certainly stand-alone PDF stamper programs and some providers like gumroad.com already offer that feature.
    Anyone actually done it with BC, please?
    Thanks in advance
    Andy

    Thanks for the rapid response, Liam -- even if it's not the response I was hoping for.

  • Is there a way to auto fill cells with the exact number in mind?

    I am trying to avoid this:
    Column "A" is used as a "MATCH(" point for an "INDEX(" formula in another spreadsheet, and although cell A329 says 73.14, which is what the other sheet can identify to populate the particular row five columns over, its really
    73.1399999999... thus, not giving me the correct reference and not populating properly. 
    Is there a solution?
    I have about 1,500 rows to go through, I know I can do this manually, one at a time, but I'm pressed for time. 
    Thanks,
    Cris

    Re:  too many numbers
    In a helper column enter a rounding formula and fill down...
      =ROUND(A2,2)
    Copy the helper column and paste Values over column A.
    Jim Cone
    Portland, Oregon USA
    free & commercial excel programs (n/a xl2013)
    https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

  • IS there any way to restore lost data with the Z22?

    is there anyway to restore data that has disappeared from both my hand held and microsoft outlook.  the information was there one minute and gone the next. 
    Post relates to: Palm Z22

    I have experienced the EXACT same problem...  can't find a solution but am searching madly.  Please post what you discover, if anything.

  • Is there a way to convert audio files with the new PlayForSure software sui

    When I use the old Media Source Audio Converter and transfer the wma file to my Zen I get a message that the audio codec is not supported. I don't think my Media Source plug ins for PlayForSure devices are working or something.

    The exact error message is: "The audio file format is not supported or exceeds the playback capability of this device." Then when you click on "More Information" it says: Codec 0X62 is not supported.
    This is retarded man, maybe if Creative would release software THAT ACTUALLY WORKED with their frigging devices they would sell more MP3 players.

  • Is there an easy way to find out if the GPIB/ENET adapter is connected to the computer?

    I'm using Component Works for Visual Basic and have no problem with my software on computers with PCMCIA GPIB adapters. The GPIB driver seems to know if the adapter is in the computer or not.
    When my software is used on a computer where the GPIB/ENET adapter is not powered on, the software seems to lock up but eventually comes back with an error. Since there doesn't seem to be an easy way to determine if an adapter is present my code just assumes it's there, which doesn't work with the GPIB/ENET GPIB dll. Is there any way I can look for the board before querying for instuments on the bus?

    Hello David,
    One possible solution would be to ping the ENET box. If you know the IP of the box, a simple ping should immediatly let you know the status of the box.
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

Maybe you are looking for