Is there a way to configure iCloud to allow different email addresses to access one iCloud instance?

I would like to set up iCloud on my home PC using my Apple ID (email account). I would also like to set up my son and daughter to be able to access that iCloud instance from their iPhones and Macs - but it seems like I have to give them access to the email account that I use as my Apple ID.
Is there documentation that will show me how I need to configure the iCloud account that will grant them access, but not necessarily using my email account for this? I am not finding this kind of information in the online help files - although maybe I am looking in the wrong place.
I would like to set up my home Windows PC, two Macs, and 2 iPhones on the iCloud instance - with the probability of adding another iPhone and an iPad.
If I create a new apple email ID to create the iCloud account, will that require me to change my whole Apple ID as well?
Thanks for any help you can offer.

Thanks Roger.
I don't have as much an issue with the access to the Apple account so much as setting it up on my kid's iPhone (say...) also pulls my personal emails too. I want to give them access to the iCloud - just not my emails!
Should I do this by setting up an alias in iCloud and setting their access using *that* ID?

Similar Messages

HT4899 Is there a way I can delete my primary @me email address so that I can receive emails only via my "reserved" @icloud address. The reason being, I receive a fair bit of spam to my @me address. Going forward I plan on using an alias for certain websi

Is there a way I can delete my primary @me email address so that I can receive emails only via my "reserved" @icloud address. eg. delete "msjones@me" and receive emails via "msjones@icloud" only.The reason being, I receive a fair bit of spam to my @me address. Going forward I plan on using an alias for certain websites to minimise this problem.

You can't delete the address, but you can set up a Rule to move messages to that address to the Trash or another folder. Go to http://icloud.com and go to the Mail page, click the cogwheel icon at top right and choose 'Rules'.
It's a bad idea to post your email address - it's an invitation to spam - even though in fact you haven't posted them in full; I've asked the hosts to remove them.

Is there a way I can right-click on an email address on a page and open the url associated with that email

I'd like an easy way to right-click on an email address on a page and open the URL of that email. Ie ([email protected] and open up mozzilla.org in a new tab or window). Is there a way of doing this or an add-on that does it without having to highlight and cut and past into the address bar?

You can't delete the address, but you can set up a Rule to move messages to that address to the Trash or another folder. Go to http://icloud.com and go to the Mail page, click the cogwheel icon at top right and choose 'Rules'.
It's a bad idea to post your email address - it's an invitation to spam - even though in fact you haven't posted them in full; I've asked the hosts to remove them.

Is there a way to establish when a distribution group email address last received a message?

We currently use Exchange 2007 but are planning to migrate to 2013 soon. As part of the prep for migration I want to tidy things up, and part of this tidy up is to remove unused distribution groups.
The user community is one that refuses to let go of anything (our retention policy is keep everything, forever), so if I ask them if they still need these groups the answer will be yes for all.
So, is there any way I can pull a report of the last time the email addresses associated with these groups were used?

Apart from above, once you find unused users list, You can try below steps to remove them in exchange 2007 : Simply open the group from the recipient configuration, Distribution group node (or from Active Directory Users and Computers). Select the members
tab and select the user and click the X.
You can take a look at this helpful article to gather more information about this concern : http://windowsitpro.com/exchange-server/exchange-2007-distribution-groups
Furthermore, when you are preparing to migrate database from exchange 2007 to 2013, you can have a look at this proficient resource available at (http://www.exchangemigrationtool.com/) that would also be
a fantastic approach for a secure migration of mailbox data between two exchange server.

Is there a way to do a mass delete of emails without selecting each one of them individually?

Is there a way to do a mass deleye on the IPhone 4s without selecting each email individually?

No. You can tap the EDIT button, then tap a bunch of emails to select them, then tap DELETE. But you still have to tap each message.

Is there a way to have form submissions show submitters email address?

Hi there...
Was just wondering - is there a way to show the form submitters email address as the "From" email address when receiving a notification from the contact form?
There's a setting that allows the form details to be sent to an email address, but that email is from the user or the site itself, so if you "reply" from within your email client, you're effectively emailing yourself...
Do I have to create a new workflow as in this thread?
http://forums.adobe.com/message/4393711#4393711
I'm sure it's blindingly obvious, but I can't see what the people in the above thread see...
Cheers, Dave

Hi Dave,
The proper way to do it is when you get a workflow or submission notification it automatically creates a 'Case' in the site admin.
It is also listed in your live feed on your dashboard.
So the next steps would be to go to that case in the admin and reply there. It will keep a record of your reply within the admin and it will send to the user.
Brad Lawryk
======================
Auroratec Business Solutions
http://www.auroratec.ca
Phone: 250-855-8835
=====================================
Adobe Community Professional: Dreamweaver
Adobe Business Catalyst: Premium Partner
My Adobe Blog: http://blog.lawryk.com

TS4185 i signed into face time with an inactive email accidentally and i can't verify the email because I can't get into it. Is there anyway to restart the process with a different email address so that I can verify it and begin using it.

I tried to start face time and it said that it would send an email to the address provided but i didn't realize that the email address there was an inactive one and now i cant use face time since i havent verified it yet. I was trying to see if there was a way to restart the process so that i can get that email sent to the corrent email address that i actually use.

If there is no other way around this, is there anyway to completely wipe the phone then??
The Apple store agreed to give me a new iPhone 4 as a warranty replacement for $150 (I travel a lot and I have a factory unlocked phone, so this is still worth it for me). But before I trade it in, I would like to make sure all my data is backed up on the device first.
When I try and restore the phone now on iTunes, it says I have to turn off Find My iPhone on the phone first before I can restore it. Now since I can't use the screen I can't really do that.
So how do I completely wipe the iPhone???
Thanks!

Is there a way of persuading iCloud to sync the smart groups I have in address book on my Mac

I have a small number of smart groups in address book on my iMac. but these do not sync through iCloud to my Macbook or iPod touch. Everythin else syncs even ordinary groups, but not the smart groups. Is there a way of persuading iCloud to do it? I can fully sync my Macbook contacts by exporting an archive from the iMac and then comying and importing this to the Macbook. But this is old technology.

longfellow39 wrote:
.......Is there a way of persuading iCloud to do it? ........
Unfortunately not.

Is there a way to use iCloud Photo Library WITHOUT syncing?

The idea I had of iCloud Photo Library was that I could upload my pictures to it and access them from all my devices WITHOUT having to sync them.
At the end of every month, I move all the photos from my phone to my computer. It helps me save space and keep things tidy. With iCloud Library, I want to access all my photos, but it looks like I must sync them through iCloud, and then to save space in my phone, I have to select "optimise space for iPhone". Is there any way to use iCloud Photo Library as a mere cloud storage? I don't want to keep photos on my phone, neither full resolution or "optimised" ones. I want to put them on iCloud, and when I need them, then I want my phone to download them.
I realise I could use other cloud storage providers for this, but I have always liked Apple's integration with their own services, so if possible, I would like to use iCloud Photo Library without syncing to my devices. Just keep my stuff in iCloud, and when I tap it, download it.

www.icloud.com.
Doesn't work well in IE8 (9 I would think is ok), but is fine in the current version of Chrome.

TS4036 I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

Welcome to the Apple community.
You can only restore them from a Computer backup. This has occurred because you are sharing an iCloud account. ideally you should each have your own iCloud account, that way you can each manage your own mail, contacts, calendars, documents etc and avoid unintentional deletions and unwanted editing. If there is information you wish to share between you, this can be done with a secondary account.
Having separate iCloud accounts, doesn't mean you have to have separate iTunes accounts, so whilst you keep your personal data separate, you can continue to share music, apps, books, TV shows, movies etc.

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS. This unit should be joining a Windows Server 2008 R2 network and needs to be shared with all users. This unit will replace a File server running Win 2003 SP2.
Message was edited by: Hermann Koster
Thank you very much for your reply. The idea is to decommission the Windows file server which is running Windows Server 2003 SP2 operating system but is not running as a DC but just a member server. All this server is doing is providing file server services so my idea is to replace it with the NSS 324 box. My only concern is that when my NSS joins the domain all my users would be able to see and access network shares transparently, the same way they saw the former W2003 file server. After I transferred the data from File server I will use the same for NSS that was used for file server as well as same IP address and folders path as before.
Any suggestions or advice?
Once again thank you very much for your reply.
Cheers,

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

Is there a way to prevent iCloud from duplicating songs downloaded if I manually sync my iPhone with my PC?

Is there a way to prevent iCloud from duplicating songs downloaded if I manually sync my iPhone with my PC?

You can avoid duplicates by only syncing with iCloud (Wi-Fi) or iTunes but not both.

If I have an iphone that didn't come with icloud, is there a way to get icloud on it so I can use it with my ipad 4?

If I have an iphone that didn't come with icloud, is there a way to get icloud on it so I can use it with my ipad 4? I think my iphone is a 3g, not sure.

Do I have to have iTunes on my PC in order to update my iPhone. I'd rather not have my computer linked with my iPad and phone. I'd like to just keep it between iPad and iPhone. I don't have a computer of my own.

Is there a way to Configure "Silent Monitoring" in CUCM with the following conditions: ?

Is there a way to Configure "Silent Monitoring" in CUCM with the following conditions: ?
-no UCCX platform
-cisco phone is CP-6941.
I have read some cisco docs pertaining to Barge and cBarge, however i see that as one-to-one arrangement.
Is there a way to configure in cucm, something like an ad-hoc conference wherein the Observer will
just call the extension number to be observed?
or something like "service observed" feature in Avaya wherein the Observer will dial a particular
passcode followed by the extension # of the agent, then he is able to observe the on-going call.

You can do continous recording using SPAN ports or DMS with 3rd party products like Verint Impact 360.
not sure about the legalities around that though.
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

Is there any way to configure storage queue message encoding for Web Job's QueueTrigger?

We have a web job that listens to Azure storage queue via QueueTrigger. The queue messages are not encoded when they are added to the queue:
CloudStorageAccount account = CloudStorageAccount.Parse("...");
CloudQueueClient client = account.CreateCloudQueueClient();
CloudQueue queue = client.GetQueueReference("test1");
queue.EncodeMessage = false;
queue.AddMessage(new CloudQueueMessage("hello world"));
And in the web job, we use the below method to listen to the queue.
public static Task ProcessQueueMessageAsync([QueueTrigger("test1")]string message)
And the web job crashes when it gets a message, with the below output. Unfortunately we cannot control the encode setting of the coming messages. So, our question is, is there any way to configure queue message encoding for Web Job's QueueTrigger?
Thank you for any help and/or suggestion.
Found the following functions:
WebJobTest1.Functions.ProcessQueueMessageAsync
Job host started
Unhandled Exception: System.FormatException: Invalid length for a Base-64 char array or string.
at System.Convert.FromBase64_Decode(Char* startInputPtr, Int32 inputLength, Byte* startDestPtr, Int32 destLength)
at System.Convert.FromBase64CharPtr(Char* inputPtr, Int32 inputLength)
at System.Convert.FromBase64String(String s)
at Microsoft.WindowsAzure.Storage.Queue.CloudQueueMessage.get_AsString()
at Microsoft.Azure.WebJobs.Host.Storage.Queue.StorageQueueMessage.get_AsString()
at Microsoft.Azure.WebJobs.Host.Queues.StorageQueueMessageExtensions.TryGetAsString(IStorageQueueMessage message)
at Microsoft.Azure.WebJobs.Host.Queues.QueueCausalityManager.GetOwner(IStorageQueueMessage msg)
at Microsoft.Azure.WebJobs.Host.Queues.Listeners.QueueTriggerExecutor.<ExecuteAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Azure.WebJobs.Host.Queues.Listeners.QueueListener.<ProcessMessageAsync>d__11.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at Microsoft.Azure.WebJobs.Host.Timers.BackgroundExceptionDispatcher.<>c__DisplayClass1.<Throw>b__0()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Press any key to continue . . .

Hi,
Thanks for posting here.
I am not too sure if the storage queue messages can be encoded before the webjob listens to it.
I am currently researching to gather more information with regards to your request.
I shall revert back to you with an update at the earliest.
Sincerely appreciate your patience.
Regards,
Shirisha Paderu

Is there a way to configure iCloud to allow different email addresses to access one iCloud instance?

Similar Messages

Maybe you are looking for