Is there a way to Configure SAP Netweaver 7.02 SP12 to display properly at least on firefox 14?

Good day, in our company we already have implemented a SAP Netweaver 7.02 SP12 but when we log into our server (Enterprise Portal) with Firefox 17.0.1 all the components are rendered badly. For example the detail navigation have been displaced to the right.
We think that could be a configuration problem. According to SAP PAM matrix, Firefox's rapid release cycle it's been supported since SP06, so we want to know what to do in order to display correctly the Enterprise Portal? is there any plugin to solve this problem?

Hey Rafael, sorry to hear about these weird issues.
Do you think you could take a screenshot of the issues you are seeing with Enterprise Portal? If you are worried about any workplace information being seen, you can edit the screenshot by coloring over the areas you think we should not see. Since we can't login to your company portal to see the issues.
You can attach the screenshot using the Add images section below the reply box.

Similar Messages

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS. This unit should be joining a Windows Server 2008 R2 network and needs to be shared with all users. This unit will replace a File server running Win 2003 SP2.
Message was edited by: Hermann Koster
Thank you very much for your reply. The idea is to decommission the Windows file server which is running Windows Server 2003 SP2 operating system but is not running as a DC but just a member server. All this server is doing is providing file server services so my idea is to replace it with the NSS 324 box. My only concern is that when my NSS joins the domain all my users would be able to see and access network shares transparently, the same way they saw the former W2003 file server. After I transferred the data from File server I will use the same for NSS that was used for file server as well as same IP address and folders path as before.
Any suggestions or advice?
Once again thank you very much for your reply.
Cheers,

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

Is there a way to verify SAP certification credentials?

Hi,
Is there a way to verify SAP certification credentials?
I passed the test and did not receive any materials from SAP
Trying to figure out if I can be verified by myself.
I am not sure which forum to post this question.
I could not find suitable forum for this. If anyone knows a better place, please advise me so.
Since I regularly contribute to this place, I have started with this forum.
Thanks

I don't know how to close this unless I mark this answered. Do I miss any?
thanks

Is there a way to Configure "Silent Monitoring" in CUCM with the following conditions: ?

Is there a way to Configure "Silent Monitoring" in CUCM with the following conditions: ?
-no UCCX platform
-cisco phone is CP-6941.
I have read some cisco docs pertaining to Barge and cBarge, however i see that as one-to-one arrangement.
Is there a way to configure in cucm, something like an ad-hoc conference wherein the Observer will
just call the extension number to be observed?
or something like "service observed" feature in Avaya wherein the Observer will dial a particular
passcode followed by the extension # of the agent, then he is able to observe the on-going call.

You can do continous recording using SPAN ports or DMS with 3rd party products like Verint Impact 360.
not sure about the legalities around that though.
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

Is there any way to configure storage queue message encoding for Web Job's QueueTrigger?

We have a web job that listens to Azure storage queue via QueueTrigger. The queue messages are not encoded when they are added to the queue:
CloudStorageAccount account = CloudStorageAccount.Parse("...");
CloudQueueClient client = account.CreateCloudQueueClient();
CloudQueue queue = client.GetQueueReference("test1");
queue.EncodeMessage = false;
queue.AddMessage(new CloudQueueMessage("hello world"));
And in the web job, we use the below method to listen to the queue.
public static Task ProcessQueueMessageAsync([QueueTrigger("test1")]string message)
And the web job crashes when it gets a message, with the below output. Unfortunately we cannot control the encode setting of the coming messages. So, our question is, is there any way to configure queue message encoding for Web Job's QueueTrigger?
Thank you for any help and/or suggestion.
Found the following functions:
WebJobTest1.Functions.ProcessQueueMessageAsync
Job host started
Unhandled Exception: System.FormatException: Invalid length for a Base-64 char array or string.
at System.Convert.FromBase64_Decode(Char* startInputPtr, Int32 inputLength, Byte* startDestPtr, Int32 destLength)
at System.Convert.FromBase64CharPtr(Char* inputPtr, Int32 inputLength)
at System.Convert.FromBase64String(String s)
at Microsoft.WindowsAzure.Storage.Queue.CloudQueueMessage.get_AsString()
at Microsoft.Azure.WebJobs.Host.Storage.Queue.StorageQueueMessage.get_AsString()
at Microsoft.Azure.WebJobs.Host.Queues.StorageQueueMessageExtensions.TryGetAsString(IStorageQueueMessage message)
at Microsoft.Azure.WebJobs.Host.Queues.QueueCausalityManager.GetOwner(IStorageQueueMessage msg)
at Microsoft.Azure.WebJobs.Host.Queues.Listeners.QueueTriggerExecutor.<ExecuteAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Azure.WebJobs.Host.Queues.Listeners.QueueListener.<ProcessMessageAsync>d__11.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at Microsoft.Azure.WebJobs.Host.Timers.BackgroundExceptionDispatcher.<>c__DisplayClass1.<Throw>b__0()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Press any key to continue . . .

Hi,
Thanks for posting here.
I am not too sure if the storage queue messages can be encoded before the webjob listens to it.
I am currently researching to gather more information with regards to your request.
I shall revert back to you with an update at the earliest.
Sincerely appreciate your patience.
Regards,
Shirisha Paderu

Is there a way to configure win 8 Laptop to airport express? I can see theN connection to the wireless network, but troubleshooter suggests there's t

Is there a way to configure win 8 Laptop to airport express? I can see the connection to the wireless network, but troubleshooter suggests there's there is no gateway and of course no internet. The connection
shows limited. Any help you could provide would be most appreciated. Further, should I simply buy another router for the windows machine? If I did that, would it interfere with the airport?

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

Is there a way to configure Mac Mail ...?

I have an IMac desktop, a MacBook & a 4th generation IPod Touch. As it now stands whenever I receive email it goes to all 3 devices necessitating the need to physically read and/or delete the messages from all 3 devices. Is there some way to configure Mac Mail to eliminate these steps or do I just have to keep manually removing mail messages as I'm now doing?
Thanks for any help you may have.

Create your accounts for IMAP instead of POP.
Here's a little youtube explaining the difference (ignore the sales pitch).
imap vs pop - what do they do?
In Apple Mail preferences, Accounts, when you go to set up a new mail account you click the plus in the lower left as usual. When the Add account sheet is displayed if you press the option key while clicking the Continue button you will be given a window to define the account as POP or IMAP.
Alternatively if you enter an invalid email address into the Add Account window and juct click Continue (no option key) you will again be given the IMAP/POP choice. This technique I think will work in the other itoys as well.

SAP NetWeaver 7.3 SP12 PAT0003

Dear Gurus,
Please provide me configuration document for SAP NetWeaver 7.3 SP12 PAT0003.
Thanks & Regards
Shilpi Mahajan

Hello Shilpi,
This may require further details as the error message is not that talkative.
But these threads provide a few hints:
The requested resource does not exist
404 Not Found The requested resource does not exist.
Not authorized to view the content of the requested directory.
How to enable web directory listing
Best Regards,
Peter

Is there a way to open Excell file from the server and display in the UI and save it back on to the

Hello there,
Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

Hi Mike,
Welcome you to the forum.
You may try:
SELECT * FROM MyDBNameHere.dbo.OUSR T0
Thanks,
Gordon

Is there a way to connect the Apple TV as a second display without it automatically changing my Mac's audio output?

Is there a way to connect the Apple TV as a second display without it automatically changing my Mac's audio output? I would prefer to use an audio interface for playback and the apple tv as a third display. I know I can go back to system preferences and swap my output back manually, but it is getting to be really inconvienient. Thoughts?

Hi and welcome to Discussions,
have a look at ScreenRecycler http://www.macupdate.com/info.php/id/22908/screenrecycler
Regards
Stefan

Is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

While working in Firefox is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

I guess I'm not explaining myself fully. I have a home page designation in firefox preferences that starts firefox up with 5 sites. that pretty fills up my screen with tabs.
At some point I want to initiate another WINDOW in firefox (NOT a tab). I would like to be able to open up a window that ONLY has ONE tab, or as if there were only one site designated as the home page. This gives me a workspace that has my most useful sites available in tabs in one window, and also another WINDOW that I can move around in and even create more tabs without messing up my primary set of TABS (in my primary window). I see how this might not be doable without doing what I do now, which is open up a new window, and then close tabs until the new window just has one tab for me to work from.

HT5891 Is there a way to remove the menu bar from a secondary display while still using the "Displays have separate spaces" mode?

Is there a way to remove the menu bar from a secondary display while still using the very useful "Displays have separate spaces" mode?
The reason I ask is that most full-screen video playback in most applications, from iTunes to Flash/Silverlight plugins do not take up the full screen, instead leaving space for the menu bar (in the case of iTunes) or leaving the menu bar present on top of the video (for fullscreen Flash/Silverlight videos).
This is annoying for several reasons ranging from the obvious distraction factor to the fact that 1080p video is not played back at native resolution on a 1080p display.
If there is no way to disable this functionality while maintaining separate spaces, I would (humbly) suggest that a future update to Mavericks allow non-Lion-style* full-screen apps to take over the entire display.
*Lion-style full-screen apps are those that animate into a full-screen mode when the opposing-arrows full-screen button in the upper-right-hand corner of the window is pressed.

No. Turning that off reverts to the old display setup. You have one desktop spanned across all displays. The menu bar appears on the primary display only.

Is there any way to remove a released transport from the SE10 display?

Is there any way to remove a released transport from the SE10 display or change the owner of a released transport?

Hi Joe
Transport Request once released can not be deleted. We can ignore sending the release request for further systems.
Kind Regards
Eswar

Configure Sap NetWeaver MDM with Sap Netweaver XI

SAP NetWeaver MDM communicates with SAP NetWeaver XI by writing an XML file into a directory on a file server.
Can someone gives me an idea about the path of this file server? How can I configure it?

Hi Stan,
In addition to that Harrison told you,if you want automatic syndication of records ,then you must have to use syndication server.In case of syndication server the path of output file is always fixed and you cannot configure it.Path will be as follows:-
<b>
SAP MDM Root Directory\Server\Distributions\<server name> \ <Database instance name>\<Repository name>\Outbound\<client System code>\<Output Port Code> \Ready\</b>
If u want scheduled syndication of records(i.e. in batch mode) ,then u can use syndicator batch.And for manual syndication ,use syndicator .Both of these components will syndicate file where ever u want/specify on the file system.
For more details about syndicator batch
<a href="http://help.sap.com/saphelp_mdmgds55/helpdata/en/a4/21c4a4f6a247b1940fc8bf1cf41f65/frameset.htm">Click here</a>
Hope it will help you.Let me know the results.
Thanks,
<b>Shiv Prashant Dixit</b>

Is there a way to configure screen sharing to mirror?

In past versions of OS X, if you used VNC to screen share, it mirrored the display. Now in 10.7, it displays a logon screen. Is there a way to revert it to the old way??

Hi dosers;
You posted your iChat question in the Leopard forum. If you really want to have this seen by the iChat heavyweights, you might want post over in the iChat Forum instead.
Allan

Is there a way to Configure SAP Netweaver 7.02 SP12 to display properly at least on firefox 14?

Similar Messages

Maybe you are looking for