Is there a way to control "push" page transitions when using up/down keys to navigate a PDF?

I have a multi-page PDF designed with push page transitions. When using the forward/back arrow keys or the interactive buttons I have designed on the page, the push navigation direction changes whether one is moving forward in the PDF or back. However, if I use the mouse scroll button or up/down arrow keys to navigate, the push navigation only animates from the same direction...and therefore makes it look as if the user is only moving "forward" in the book. Is there a way to control this effect more precisely?
I am creating the document with InDesign CC 2014, adding the page transitions within the file, and exporting to interactive PDF using the setting "Page Transitions: From Document".

I don't think the iPad has it in it to control another device. Unless there's an app for it to be a remote control, but I'd imagine that it woudl be very brand specific.
You can certainly experiment with the VGA or HDMI adapters, but I wouldn't put total faith in them unless you had the ability to experiment prior to your presentation. I'd definitely have a backup plan.

Similar Messages

Is there a way to adjust the frame length when using a FFT

Is there a way to adjust the frame length when using a FFT?
Thanks,
David

I thought that to have a longer frame rate you just need to have a longer sample set.

I am hard of hearing, is there some way of boosting the volume especially when using a headset

I am hard of hearing...is there some way of boosting the volume when wearing a headset?

Get an amplified headset.

Can we control order of cycling when use same access key in multiple locations

Hi,
I'm using Jdev 11.1.1.6, IE 9, Firefox 24.0.
I have created simple jspx page having two buttons, named Add and Close. Close button has got access key as C. When click on Add button I'm calling a <af:popup> and that popup contains two buttons Submit and Cancel. Cancel button has got access key as C. Basically in one jspx file I have got two button using same access key. At runtime those buttons will display one in page and one in popup.
In IE: it works fine. When I do access key on popup it will close down the popup.
In Firefox: it will first focus to the button on the page. When I access the same key for the second time it will set the focus to button on popup and will not execute the action.
If I'm using different letters it will perform the action in firefox and IE both. In my requirement I need to use the same letter.
I read in oracle documentation "If the same accessKey appears in multiple locations in the same page of output, the rendering user agent will cycle among the elements accessed by the similar keys.". So it seems to be an expected behaviour.
My question is: Can we control the order of cycling. i.e. If we do access key on popup, can we first focus on the button in popup instead of button on the page in firefox.?
Greatly appreciate your ideas.
Thanks.

Hi,
unfortunately yes, the cycling behavior is up to the browser.
Frank

Is there a way to 'latch' a boolean condition when using local variables? Help!

Hello all
I've made LOTS of progress on my vi over the weekend and even today. I've been battling with a project with this scope:
1. Read temperatures from 24 locations (6 banks of four thermocouples).
2. Set individual channel temperature upper limits
3. Output temperatures, elapsed time and time stamp to file in 5 minute increments AND write data when an overtemperature condition occurs.
4. Use NI-switch to shut off a motor related to each of the 6 banks of thermocouples independently
5. Be able to start/stop elapsed timers on each of the 6 banks based on user input (start/pause) OR conditions (pause at overtemperature)
6. Be able to reset those elapsed timers with user input as well.
I've gotten 1-4 working nicely (although my example included has the DAQ assistant replaced with random number generation) and the NI-switch cases replaced with a simple boolean indicator.
My problems lie in two areas now. First, I need the switch condition AND the 'pause time' to be 'latched' when an overtemperature is reached and NOT continue operation until user input. Basically, when the motor relay is triggered to shut the motor off, I need the timer to stop with it and not restart when the input condition changes (in this case, when the thermocouple drops below the control temperature) until an operator tells it to resume. I also need the switch condition to stay true so that my 1160 isn't switching back and forth every iteration until the temperature drops.
You'll notice there's 5 'elapsed time' express VI's in conditional loops on there--and one time structure in a parallel while loop. The outside structure is the way I'm heading as it retains the value in the elapsed timer when paused. This is critical to the test! All 5 of those elapsed time express VI's will be leaving in favor of more of those outside loop structures. My issue with the outside timing loop structure is that I can't figure out how to 'reset to zero' with a user input like you can with the express VI's, and that it outputs only ms data rather than a HH:MMS format (not a complete deal breaker but would be nice).
Please, anyone in the know, I need to button this up so I can get it implemented soon. My old VI which is currently running the tests is far too user-unfriendly for most of the users to handle and the output to file is a wreck... THANKS so much in advance.
Ralph
Still confused after 8 years.
Attachments:
temperatures.vi ‏730 KB

I've looked up the enum constant and am completely baffled as to how to use this to do what I'm trying. Can you shed a bit more light on the subject?
Still confused after 8 years.

Is there a way to create a smooth transition while using a cutaway?

I'm creating a music video for my band and I have a great scene that I've 'dropped in' the middle of a clip with the audio muted. The problem is, because of the movement in the clip it looks like a very sloppy edit and could really benefit from a cross dissolve transition. Unfortunately every attempt to drag, drop, assign a tranisition over a cutaway ends in failure. Is this possible. And no I'd perfer NOT to split the clip at edit points, drop the new clip in and manually try to sync the audio. Honestly iMovie is extremely imperfect at that.
Any answer is appreciated.
Message was edited by: wheresgrant1

I don't believe it is possible to apply transitions to a cutaway directly.
hmmm I see what a pain this is. You are right. There might be a round about way.
You might try to improve your cutaway clip first in a project all by itself. Then add it to your full vid.
another roundabout way:
There is no need to resync the audio. Right click on the original track. Select detach audio. Choose the cutaway clip and drag it onto the original one. Make it so the ends are where you want them.
Now zoom in all the way and select the frame where the clip starts (use the left and right arrows to help). Split the original clip at this point. Do the same for the end. Now the selection you remove will be the same length as your cutaway and audio will stay in sync. Then copy the cutaway, delete both the original split section and cutaway, and paste the "cutaway" into the space.
a pain, but seems to work?

Is there a way to embed a color profile when using Generate Assets?

I'm searching everywhere for a command to embed the profile to my images output with Generator and i'm not having any luck. Does someone know if this is possible? So far, my only work around is to script Assign Profile, but doing that with thousands of png's is taking way too long. Please tell me there's a simple bit of syntax i can add to my folder names.
thanks!

Thanks so much for the response, Chris.
Hopefully a future update will include this additional bit of code.

Is there a way to open a second firefox instance using a shortcut key (i.e. Ctrl + Alt + 9), while a first instance is already running?

This happens both in Windows XP and Windows 7. Firefox is the only application that does not allow this consistently (this works with MS-Word, Google Chrome, Notepad etc.).

Yes, but {Ctrl + N} is useful only when you are already in Firefox. I meant quickly launching Firefox while using another application via a user-assigned shortcut key. For example, I am writing a text in MS-Word and I want to run a quick Wikipedia search; now, if Firefox is already running in the background, my shortcut for Firefox (e.g Ctrl + Alt + 9) won't do anything - it will only launch Firefox, if it is the first Firefox window to be opened. Thanks anyway though!

Is there a way to control the quality of my pdf file when exporting from a .pse file?

Is there a way to control the quality of my pdf file when exporting from a .pse file?
Hi,
I have 2 pages in all in a .PSE file.
When I try to export it as .PDF, the quality is very poor. I cannot change it to a better quality.
Please advise how I can export the file so that i can have better quality.

Rik Ramsay wrote:
To expand a little on what Jongware said, normally choosing vector over bitmap will decrease the filesize. If the vector art is very complex though, this will not be true.
Yup, a logo as bitmap takes up more space than the same as a vector -- unless the vector image is bitmap heavy (think Drop Shadow, Outline Glow; these are actually bitmap effects).
Also, check your PDF version. "Older" versions do not support live transparency, the latest do. Then again, you cannot use live transparency if you suspect your viewers may be using Mac OS X, because Apple's own PDF viewer sucks big time.

Is there any way to control automator through voice commands?

is there any way to control automator through voice commands?
Im simply trying to program my macbook pro early 2011 8gigs ram to resound to voice commands using automator but I haven't found any discuss on the subject.

I have some AppleScript that expects a Pages (v5.2.2) document opened. It will then then speak the document name, and the count of words in the document. Or, I can trigger Speakable items and tell it to, "Switch to Pages" which it does immediately, because this is part of its repertoire of built-in commands. Then speak Word Count?
In Automator, I created an Application, in which I dragged/dropped the Library > Utilities > Run AppleScript action into the workflow window. I replaced the AppleScript boilerplate with my existing AppleScript code that speaks the word count, and saved the Application into <login dir>/Library/Speech/Speakable Items folder as Word Count? (without the .app extension). It can also be saved in the Application Speakable Items > Pages sub-folder under the general Speakable Items folder.
Next, I turned on Speakable Items in System Preferences > Accessibility > Speakable Items.
It took several tries to get a spoken result from the Automator application, but it did work. Even with a calibrated microphone, and speaking about 18 inches from it. About 2 successes for ten tries. If I just put the AppleScript (without extension) in the same folder, my success rate would improve to 5/10. You may grow very weary of the repetition necessary to get Speakable Items to work. A small pink text banner also appears with the spoken content in it — below the Speakable Items monitor on the screen.
Automator is scriptable. This means that in AppleScript, you can dynamically build an Automator workflow, and then execute it.

I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?

I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!

My apologies for the lack of photos, here is my post again with photos.
I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!
iPhone 6, iOS 8.3, Also an issue on my iPad mini iOS 8

Is there a way to control the number of concurrent SMTP connections on Database Mail?

Las week Rackspace started controlling the number of concurrent SMTP connections and we are now getting the following message when we send as little as 15 messages at a time using Database Mail:
Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response was: 4.7.0 smtp13.relay.dfw1a.emailsrvr.com Error: too many connections from IP xxx.xxx.xxx.xxx)
We are using SQL Server 2005 and Windows 2003 and we have been doing this since 2006 with no problems
Is there a way to control the number of concurrent SMTP connections used by Database Mail or the Database Mail external executable DatabaseMail90.exe?

Hi rkohler,
Usually, we can use the Database Mail Configuration Wizard or the Database Mail stored procedures to determine the server name and port number for the Simple Mail Transfer Protocol (SMTP) server . In the SMTP server points, we can set or increase the number
of concurrent connections.
There is similar issue about database email on SQL Server 2005, you can refer to the following post.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6bb7b600-f025-451b-898b-2caa29c10d4d/only-some-email-gets-sent-successfully-from-spsenddbmail-database-mail-on-sql-server-2005
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content.

Is there a way to add multiple pages to a project at once?

Creating a iBook of my Graphic novel, and instead of adding a page at a time, is there a way to create 100+ pages and THEN import the artwork, as opposed to creating a page a time?

Make a 100 page chapter, w/images in Pages or Word, then import and rework as needed.
If it's just graphics page-by-page, tho, I would stick w/Pages & calibre to create a standard epub and not bother w/iBA.
Ken

Is there any way to control the volume on my Apple TV?

Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

Is there a way to control "push" page transitions when using up/down keys to navigate a PDF?

Similar Messages

Maybe you are looking for