Is there a way to control the section prefix (chapter, section, ...) to say something else ?

i would like to use different section prefix text than author uses by default. i would not find a way to change the text anywhere.

Philipp,
Make sure your Styles Drawer is open.
Then 'select' the text you want changed. You will see that its paragraph style is now highlighted in the Styles Drawer,
Change font, style, size, colour, etc.
While the text is still selected, click the little red arrow to the right of the style name in the drawer. In the drop down menu, select: "Redefine Style from Selection".
The preview in the Style Drawer will now be the same as your selection, and will automatically change every instance of that style throughout the entire book.

Similar Messages

  • Is there a way to control the number of concurrent SMTP connections on Database Mail?

    Las week Rackspace started controlling the number of concurrent SMTP connections and we are now getting the following message when we send as little as 15 messages at a time using Database Mail:
    Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response was: 4.7.0 smtp13.relay.dfw1a.emailsrvr.com Error: too many connections from IP xxx.xxx.xxx.xxx)
    We are using SQL Server 2005 and Windows 2003 and we have been doing this since 2006 with no problems
    Is there a way to control the number of concurrent SMTP connections used by Database Mail or the Database Mail external executable DatabaseMail90.exe?

    Hi rkohler,
    Usually, we can use the Database Mail Configuration Wizard or the Database Mail stored procedures to determine the server name and port number for the Simple Mail Transfer Protocol (SMTP) server . In the SMTP server points, we can set or increase the number
    of concurrent connections.
    There is similar issue about database email on SQL Server 2005, you can refer to the following post.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6bb7b600-f025-451b-898b-2caa29c10d4d/only-some-email-gets-sent-successfully-from-spsenddbmail-database-mail-on-sql-server-2005
    Thanks,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • Is there any way to control the volume on my Apple TV?

    Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
    First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
    Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
    The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

    Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
    It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

  • Is there a way to control the quality of my pdf file when exporting from a .pse file?

    Is there a way to control the quality of my pdf file when exporting from a .pse file?
    Hi,
    I have 2 pages in all in a .PSE file.
    When I try to export it as .PDF, the quality is very poor. I cannot change it to a better quality.
    Please advise how I can export the file so that i can have better quality.

    Rik Ramsay wrote:
    To expand a little on what Jongware said, normally choosing vector over bitmap will decrease the filesize. If the vector art is very complex though, this will not be true.
    Yup, a logo as bitmap takes up more space than the same as a vector -- unless the vector image is bitmap heavy (think Drop Shadow, Outline Glow; these are actually bitmap effects).
    Also, check your PDF version. "Older" versions do not support live transparency, the latest do. Then again, you cannot use live transparency if you suspect your viewers may be using Mac OS X, because Apple's own PDF viewer sucks big time.

  • Is there a way to control the number of consumed messages from JMS?

    Hi everyone,
    I have a BPEL process that is consumes messages from a foreign queue, performs a transformation, and passes it to Oracle Apps. I'm curious if there is a way to control the number of messages consumed at a time for processing.
    For example, if we place 50 transactions on this queue, I would like to only consume 10. And then as each one is processed and passed to Oracle Apps, I would like to pull another transaction off the queue. So basically I would only be processing 10 at the most.
    The issue I am having is we put 50 on the queue and the 50 are take off right away. But then half are making it into Oracle Apps and the remainder is failing with a JCA Connection Factory max connection error.
    Instead of changing the settings to get more through, I am wondering if it's possible to limit the number being processes at any one time.
    Thanks

    Hi,
    Have a look at the adapter.jms.receive.threads Property for JMS Adapter...
    http://docs.oracle.com/cd/E21764_01/core.1111/e10108/adapters.htm#BABCGCEC
    Cheers,
    Vlad

  • After right-clicking the Firefox Icon, a window pops up with one of the titles being "Frequent." Web sites are always being added to this section that I do NOT want. Is there a way to control the number of listings under "Frequent?"

    After right clicking the Firefox Icon, a window pops up above the icon with three sections in it. Two are titled, they are "Frequent" and "Tasks."
    The "Frequent" section each time I see it, has added previous sites that I have visited. This list then has lots of duplicates in it. I do not need that, and would like to keep this listing a a favored few.
    Is there a way to stop having superfluous web-sites added to the "Frequent" list ??
    Thanks!

    After right clicking the Firefox Icon, a window pops up above the icon with three sections in it. Two are titled, they are "Frequent" and "Tasks."
    The "Frequent" section each time I see it, has added previous sites that I have visited. This list then has lots of duplicates in it. I do not need that, and would like to keep this listing a a favored few.
    Is there a way to stop having superfluous web-sites added to the "Frequent" list ??
    Thanks!

  • Is there a way to control the "back button"?

    i've got a simple animation intro, ending with the very last
    key frame being static with links. then the links will bring up
    another page in the same window. but i was wondering if there was a
    way in flash to control the back button to bring the user to that
    very last key-frame, at the end of all the animation. thereby
    skipping over the intro-animation.
    also:
    i have an html intro page, where you can go to the flash
    introduction, or the peoples' old website, or to a Flash-Player
    download window. i was wondering if there was a way to create a
    link to that end key-frame in order to by-pass the animated flash
    intro.
    thanks for your help

    gotoAndPlay(32) if you have a continuos animation after that
    frame and you want to continue it; the number within the brackets
    is the number of the frame you want to go to. Or else if you want
    to go to a particular frame and stop there, gotoAndStop(32);

  • Is there a way to control the video's speed in VideoDisplay?

    What I actually planned was to create a slow-mo feature on my players. Basically, reducing the movie speed by half (or by .25X the actual speed).
    Video's are on SWF format. Is there a way to do it?
    Thanks in advance. Any help would be appreciated.

    BUMP

  • Is there a way to control the Magic Trackpad scrolling speed?

    I just got the new magic Trackpad.
    I am finding the speed of scrolling in window to be quite fast such that I it goes to far. Is there anyway to control the speed of it so it does not go to fast?
    Thanks and I look forward to your reply.

    I haven't received my MTP yet but if it works like the trackpad on my MBP you just don't flick your finger so fast. The speed is governed by how quickly you move your finger across the surface which is something I find very cool because it puts me in total control.
    Regards,
    Roger

  • Is there a way to control the size of the pictures taken by iPhone?

    The photos taken by iPhone are fairly large photos and require quite a bit of time for transfering when taking hundreds of photos.  Is there any settings in iPhone that can control the size of the pictures being taken?  Thanks

    Sorry, no. You might try looking in the App store for a third-party app that provides this functionality, but such is not natively built into the iPhone.

  • Is there a way to control the computer name that an application sees in 2012 Server (i.e. Terminal Server Compatibility flags)

    I’m looking for the proper location to set the TS Program Compatibility Flags (for controlling application execution in execute mode) under 2012 server.
    On Server 2003, we can use:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Terminal Server\Compatibility\Application\MYAPP
    On Server 2008, we can use:
    HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\Terminal Server\Compatibility\Applications\MYAPP
    Is there a similar setting in 2012 Server?

    I have an open question about this issue on the partner site, with no fix yet. Did any of you find the answer? I have a client who needs to have Server 2012 R2 report user name or the name of the computer accessing the RDS server.
    They currently have a 2000 Terminal Server, and I always thought it was reporting user name to MAS 90, but when I looked recently, I found that it actually reports the name of the computer that is connecting to the terminal server, which also works fine.
    MAS 90 just needs to see a different name for each connection.
    These are the current entries on the 2000 terminal server, and they cause it to show remote computer name in MAS 90 fid0map.ini file:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Terminal Server\Compatibility\Applications\PVXWIN]
    "Flags"=dword:0000001f
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Terminal Server\Compatibility\Applications\PVXWIN32]
    "Flags"=dword:00000408
    Thank you for your help!
    Gregg Hill

  • Is there a way to control the sounds coming from a website in a tab or window for Firefox so that I can listen to music from a media player without hearing the website's sounds?

    I want to listen to Youtube or music on Winamp, and also play an online game. But the sounds from the game are distracting and I want to turn them off or make it much quieter. Can I control sound output from a particular tab or windor?

    Jake,
    There are several options here.
    I would suggest using your own code for datalogging. The datalogging you are referring to is primarily for debug, and one shot datalogs of front panel indicators (and controls?), not including graphs, etc.
    If you go to the file functions, you will see a menu for datalogging. These functions will allow you to save your data, as you need it, simply, and in a compact format.
    I recommend opening the datalog file, doing all your file operations, and closing the file before the program is complete. There are several examples of this in the examples database.
    Good luck

  • Is there any way to control the zoom factor so that when my SSIS Package is opened, it is entirely visible within Visual Studio?

    I have formatted my SSIS Package beautifully, if I do say so myself, so that all my tasks are visible at 50% zoom. However, when I close my project and then re-open it in Visual Studio, it defaults back to 100%...YUK!
    I did find this post which didn't seem to work...even to the point that no where within my xml could I even find the "PersistedZoom" Parameter. I even tried manually adding it, I couldn't find the exact syntax on it, and that didn't even work.
    1. In BIDS (Visual Studio) first close all open SSIS packages / xml files to avoid confusion ...
    2. Right click on the SSIS package and select the "View Code" menu item. (to open the actual xml)
    3. Search for all instances of "PersistedZoom" and change the value directly to the right of it to 100 (mine
    was 80 or 90 ...)
    4. Now save and close the XML file.
    5. Now open the SSIS package in the designer, you will notice that it is still scrolled to the bottom right!
    6. Now make any small change (I scrolled to the top-left and just slightly moved a task)
    7. Now save and close the designer
    8. Re-open the SSIS package in the designer! and what do you know it does not start scrolled down to the bottom right anymore!
    Let me know if you still have issues - but as I said I followed this same process on all my problem packages and they ALL now open correctly.
    I noticed that after doing all this the PersistedZoom property disappeared from the xml, which leads me to believe that if I zoom in and out of my packages again it will probably get stuck by opening to the bottom right again ...
    Can anyone help me out with this?
    Thanks for your review and am hopeful for a reply.
    PSULionRP

    There is no way to preserve view preferences.Just remember or annotate the zoom % used in the package.
    You may want to open an MS Connect item asking to add such a feature.
    I can tell you it may not be implemented because a package may be opened on different size monitors.
    Arthur My Blog

  • Is there a way to control the width of Sidebar in Finder (Leopard)?

    Each time I open Finder (and there is no difference between different views - Icons, List, Column, Cover Flow!), my *Sidebar with its width takes a good 1/4 of my screen*, so I have to use mouse in order to decrease Sidebar's width!? No mattere I've tried different views, Sidebar takes always mentioned width when I opened it first time. If Sidebar already is opened with "fixed" width, it is OK.
    Any suggestions? Could it be "fixed" by using Terminal, or...?
    Thank you in advance.
    prof. DEJA VUE

    I am puzzled. I just tried the sidebar on finder, adjusted it with the mouse, closed the finder window and it reopened perfectly as to where I "slided" it to with the mouse.
    (e.g. if I slide it 3/4 across to the right, having a WIDE sidebar, this is how it reopened, and similarly having e.g. 1/8 width). Unless I misread what you mean?

  • I have two questions.  How do I burn a DVD from a slideshow created in IPhoto without using IDVD which is no longer available?!!  And is there any way to control the automatic zooming in my slideshow?

    I know IMac messed up by no longer offering IDVD OR ILIFE on their new computers. Yes I too am mad I spent the money.  But does anyone have a solution  on how to work with the limited programs I did get?  Or what programs do you suggest I purchase to be able to do something as simple as burn a slidewshow on a DVD!!!!  I already purchases Xilisoft DVD which does not allow for photos only videos.  I want to use both!  I have had my new mac less than a year.  Can I still return it?

    If you contact Apple at
    U.S. iPod, Mac and iPad technical support:
    (800) APL-CARE (800-275-2273)
    You should be able to get a copy of the original DVDs for  a nominal charge.

Maybe you are looking for