Is there a way to control the size of the pictures taken by iPhone?

The photos taken by iPhone are fairly large photos and require quite a bit of time for transfering when taking hundreds of photos.  Is there any settings in iPhone that can control the size of the pictures being taken?  Thanks

Sorry, no. You might try looking in the App store for a third-party app that provides this functionality, but such is not natively built into the iPhone.

Similar Messages

  • Is there a way to increase the size of the control panel?

    I have a Surface Pro 2 and, on illustrator and Photoshop, the control panel is tiny. Is there a setting to increase the size of the control panel?

    I found the solution today on Microsoft's website.  It worked for Illustrator but not for Photoshop.   If Acrobat would stop crashing every time I open a file - or if someone on the forum could give me a solution to why it does - I could furnish the URL.

  • Time machine makes 30 backups for the last two days, no backups for any earlier times: is there a way to control it?

    I've been running Time Machine in the background for as long as I've owned my current Mac--- a few months.  It is a completely generic set-up: it's a desktop (rarely shut off or asleep) connected to an external hard drive that is much larger (1 TB) than my internal hard drive (0.5 TB), and Time Machine is configured to save backups of my whole internal drive to the external drive.  The external is half-full, and the internal is a little more than half-full.  I often hear my external crunching away, working on something.
    I recently needed to access an old file, so I went into Time Machine mode on the folder where it had been deleted a few weeks ago.  While I'm not upset that it isn't available (it's my own fault for deleting it), I didn't expect the Time Machine to have such a bad distribution of saved backups.  There are 30 backup snapshots of the past two days, and nothing earlier.  I was expecting something more like a few from today, a few from this week, a few from this month, and a few going all the way back in time--- a broader distribution.
    I don't see any way to control this in the Time Machine Preferences (in fact, very little control at all).  Is there a secret way to control it, or some tip to ensure a more useful distribution of saved snapshots?
    Thanks,
    -- Jim

    Thanks, but it doesn't exactly address my question.  TimeMachineEditor allows me to set the intervals or times when backups occur, but it doesn't control the algorithm that decides which snapshots should be deleted.  My problem was that Time Machine chose to delete all of the old snapshots and keep only the most recent ones: I'd like it to keep more of the recent ones than the old ones, but still keep some old ones.
    In fact, the (unmodifyable) text on the Time Machine control panel says that it keeps:
    hourly backups for the past 24 hours
    daily backups for the past month
    weekly backups for all previous months
    That would be perfect if it were true.
    Perhaps the algorithm did the wrong thing because the size of my internal hard drive varied quite a lot a few days ago: a process got out of control and used up all of my internal disk space.  I killed the process and deleted its output (several times), so my internal disk eventually went back down to normal.  Perhaps in the intervening hours, Time Machine made a backup, once an hour, and used up all of the external drive space.  When it had to choose between keeping "weekly backups of previous months" and "hourly backups of the past 24 hours", it chose to keep hourly backups of the past 24 hours.  This was the wrong choice in my case (it was the unwanted output) and is probably the wrong choice in most cases.
    Is there a way to control the algorithm that decides which backups to keep and which to delete?  I would have it delete the hourly, daily, and weekly backups in a way that preserves their relative distribution.
    By the way, while I have made it sound like my problem was a runaway log file (something that would be easy to put in an excluded directory with Time Machine's "Options" button), it was a VirtualBox snapshot merge.  The data in question are precious, but were unnecessarily copied many times while VirtualBox failed to merge them properly.  I can't simply exclude a directory: I'm talking about a more general problem.
    Thanks!
    -- Jim

  • Is there a way to control the number of concurrent SMTP connections on Database Mail?

    Las week Rackspace started controlling the number of concurrent SMTP connections and we are now getting the following message when we send as little as 15 messages at a time using Database Mail:
    Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response was: 4.7.0 smtp13.relay.dfw1a.emailsrvr.com Error: too many connections from IP xxx.xxx.xxx.xxx)
    We are using SQL Server 2005 and Windows 2003 and we have been doing this since 2006 with no problems
    Is there a way to control the number of concurrent SMTP connections used by Database Mail or the Database Mail external executable DatabaseMail90.exe?

    Hi rkohler,
    Usually, we can use the Database Mail Configuration Wizard or the Database Mail stored procedures to determine the server name and port number for the Simple Mail Transfer Protocol (SMTP) server . In the SMTP server points, we can set or increase the number
    of concurrent connections.
    There is similar issue about database email on SQL Server 2005, you can refer to the following post.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6bb7b600-f025-451b-898b-2caa29c10d4d/only-some-email-gets-sent-successfully-from-spsenddbmail-database-mail-on-sql-server-2005
    Thanks,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • I need to change the size of the view for easier reading.  Is there a way to make the page view larger without affecting the form?

    Hi Guys, good product beginning however it's not as good as many of the other Adobe product's workspaces.  I cannot change the size of the view during form design work, so it's a visual strain to work in Forms Central.  Is there a way to modify the view (not affecting the width, size or font when presented on website or on paper)?

    In Photoshop CC 2014 (Windows only) it is possible to use a setting of 200% to scale the UI. On some monitors it improves readability and on others it cuts part of the application screen. To give it a try go to:
    Edit >> Preferences >> Experimental Features
    Put a check-mark in the box and click OK
    Then close PS and re-start for the change to take effect.

  • The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

    The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed.  Thanks!

    If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
    If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership. 
    Please refer to : Lightroom and Creative Cloud FAQ
    Regards
    Rajshree

  • Is there any way to control the volume on my Apple TV?

    Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
    First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
    Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
    The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

    Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
    It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

  • When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box, for a specific area on the page...instead of it going on in one straight long line...?

    When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box on a specific area of the page...instead of the text box going on in one straight long line....? I'm not seeing there's an option or ability to do so, just wanting to confirm.

    Improving the handling of multiple line text fields is in our plans, but for now, you will have to add manual carriage returns (Enter).
    Thanks,
    Josh

  • In putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I wnt to red

    picture size...in putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I want to reduce the image to fit the size of the box.

    If you right click on the image on the page in the context menu select photo box alignment and then select one of scale to fit {centered, Left-aligned, Right-aligned}
    That should do what you are loking for.

  • When converting a document on Pages to PDF, is there a way to shrink the size of the PDF document?

    When converting a document on Pages to PDF, is there a way to shrink the size of the PDF document?

    When exporting you are given 3 options:
    Good, Better, Best
    But I am guessing you are asking something else, just haven't said so.
    Peter

  • Is there a way to control the quality of my pdf file when exporting from a .pse file?

    Is there a way to control the quality of my pdf file when exporting from a .pse file?
    Hi,
    I have 2 pages in all in a .PSE file.
    When I try to export it as .PDF, the quality is very poor. I cannot change it to a better quality.
    Please advise how I can export the file so that i can have better quality.

    Rik Ramsay wrote:
    To expand a little on what Jongware said, normally choosing vector over bitmap will decrease the filesize. If the vector art is very complex though, this will not be true.
    Yup, a logo as bitmap takes up more space than the same as a vector -- unless the vector image is bitmap heavy (think Drop Shadow, Outline Glow; these are actually bitmap effects).
    Also, check your PDF version. "Older" versions do not support live transparency, the latest do. Then again, you cannot use live transparency if you suspect your viewers may be using Mac OS X, because Apple's own PDF viewer sucks big time.

  • Is there a way to adjust/customise the size of the Perform Window?

    Hey guys,
    Does anyone know of a way to customise the size of the perform window??
    i dont want the perform window to fill the whole screen as i need to see another small external window whilst playing. The peform window when in edit mode is too small for what i need, as i cant clearly see values and parameters. Especially peforming on stage.
    I've tried adjusting the sizes of the 3 differnet windows in edit mode but its still too small when as big as it can be.
    Is there a way to make the peform window fill 3/4's of the screen and have the other quarter desktop/plug ins/external device??
    This would save a lot of hassle and time flicking between different screen shots and more time to be creative
    Hope someone can help
    thanks

    Hi
    Preferences:Display
    Uncheck the Perform in Full Screen box and you will get a regular OS Window that can be resized.
    Or Use View:Perform in Window
    CCT

  • Several html widgets I created contain the javascript libraries. Is there a way to create a common javascript library that can be accessed by all my widgets? I'm trying to reduce the size of the ibook I'mm creating.

    Several html widgets I created contain the javascript libraries. Is there a way to create a common javascript library that can be accessed by all my widgets? I'm trying to reduce the size of the ibook I'm creating.

    Seen this thread?
    Can javascript libraries be shared across widgets?

  • Is there any way that a jframe can be made to be the size of the screen

    is there any way that a jframe can be made to be the size of the screen assuming that it adjusts to altering sizes and also resolutions.

    Reg_Dwight,
    Please start posting your questions into the correct forum. Your Swing related questions should be posted into the Swing forum. This is the second time I have asked you and about the third or fourth time you have been told this.
    Thanks for your co-operation.

  • Once combine file, it is too large to email. Is there a way to reduce the size of the file?

    Combined files and now it is too large to send. Is there a way to reduce the size of the converted file in Adobe?

    Hi yodonna,
    Adobe Reader doesn't allow you to reduce the size of a PDF file, as Acrobat does. But, you could upload that file to your Acrobat.com account, and create an anonymous link to it using Adobe Send. Then, you could send that link via email. You can access Adobe Send at https://cloud.acrobat.com/send. The Create an Anonymous Link feature doesn't require that you have an Adobe Send subscription.
    Best,
    Sara

Maybe you are looking for

  • Wordpad object in rtf format - XML publisher

    We are trying to insert a Wordpad OLE object(Printer Signature Escape code Sequence) in the xml template and trying to generate the xml report in rtf format. When we generate the report or preview in rtf format the inserted Object Contents are not di

  • Time query in oracle

    Hi, I created one table create table test_ni( start_time varchar2(20), end_time varchar2(20)); insert into test_ni values('12:15:58','12:23:01') ; commit; I want output 7 minutes 3 second or 7.03 can anybody please help.

  • Online downloadable seed records

    Hi Can anybody throw some light on the above subject Thanks Prasad

  • Photoshop Elements  13 crashes every 5-10 minutes

    Photoshop Elements  13 crashes every 5-10 minutes and requires a restart any ideas???

  • Can't leave comments on blogs using iPad

    I cannot comment on blogs using my iPad. Have tried Safari and Chrome. Found a suggestion to try Opera but it is so slow it won't even load the sites. Any suggestions?