Is there a way to conver a jpeg to a web archive

hey guys is there a way you convert a jpeg to a web archive
thanks for reading

You can Right-Click too to bring up the Get Info dialog box. If you go to the artwork tab, (the last tab) then you can click the add button, and a standard Mac dialog box opens and you can navigate to the jpg file of your choice in a normal Mac fashion.

Similar Messages

  • Is there a way to create still jpegs from video clips in iMovie?

    I shot some video on Christmas day and imported them to iMovie 9.
    I want to creat some jpegs from the video clips and print them as photos.
    Is there a way to create a jpeg from a video clip and save the file?
    Thanks for the info!
    Len

    Here is a method for extracting a still from iMovie 09.
    Are you working in iMovie and realize that certain frames in the movie would be perfect as photographs? Here is how to extract them...
    *To get a still frame from an Event*, right-click on the frame and select "Add Still Frame to Project". The still will be added to the end of the current project. Right click on the still frame in the project and select "Reveal in Finder". You will see a jpeg file that is highlighted. Drag this jpeg file in the finder to the iPhoto icon on your dock.
    *If you want a still from a project*, rather than an event, the process is similar, except you right-click on the frame and select "Add Freeze Frame", and it adds the freeze frame at the end of the clip rather than at the end of the project. Right-click/reveal in Finder, drag JPEG to iPhoto icon in dock.
    *If you are not using iPhoto*, and just want to save to your desktop, click Reveal in Finder as above, then COPY, then PASTE to desktop.
    Hint: If you do not want to clutter up your iMovie Project with stills at the end that you would have to go back and delete, then create a separate iMovie Project just for your stills, and follow the instructions for capturing stills from an Event.
    Note: If you do not have a right mouse button, then control-click will work instead of right-click.

  • I need a picture from an event that I only have video of.  Is there a way to get a jpeg/still shot exported from imovie clip?  I'm a fairly new mac user.

    I need a picture from an event that I only have video of.  Is there a way to get a jpeg/still shot exported from imovie clip?  I'm a fairly new mac user.

    John Codgell has some tips on how to use MPEG Streamclip to do this on this Discussion Thread:
    Helpful AnswerRe: can you make a still photo from clip

  • Is there a way to get custom JPEG album art to "stick" in iTunes 11.1.4?

    Is there any way to get custom jpeg album art to stick in iTunes 11.1.4?

    You can Right-Click too to bring up the Get Info dialog box. If you go to the artwork tab, (the last tab) then you can click the add button, and a standard Mac dialog box opens and you can navigate to the jpg file of your choice in a normal Mac fashion.

  • Is there any way to read XML directly from a Web Page ??

    i have a url, which on sending request, shows XML in browser.
    Now i need to read this XML in browser and then manipulate it according to my need and display it on another page.
    actually the process is. :
    1) i have to first retrieve an xml from other site. (XML will only be shown in browser)
    2.)then i have to read the Xml and show it in according to my requirements.
    Is there any way to read XML directly from a Web Page ??
    is their logic to accomplish this.
    e.g in Servlet i can do somewhat like this :
    String wholeXml=Somemethod(url);
    Please Advice

    the average Java XML parser will accept an InputStream, so just open an URLConnection to the webpage, get the inputstream from it and feed that inputstream to the XML parser. If the URL has valid XML data, it will get parsed without problems.

  • Is there any way of converting a jpeg image into a vector in Fireworks? Deity Babbage, where be thee?

    I am hoping for a quick way of converting images (jpeg etc) into a vector.
    Is this possible?
    Thanks
    Eddie

    Try this:
    http://vectormagic.com/home
    It won't work with really complex images or photos, but if you have something like a logo, it can work well. You'll need to edit the vectors it generates to smooth out some bumps and incorrect nodes, but editing a vector is much easier than drawing the whole thing from scratch.
    Hope this helps!

  • We have a satellite connection that restricts our download amount per day. Since watching videos on YouTube and viewing Facebook photos online counts as downloads, is there any way I can see how much each web page is in terms of MB or KB size?

    Our satellite company's Fair Access Policy allows:  425 mb max per 24 hours, but it seems like we often go over that amount by just surfing the internet. We have 2 adults and 3 kids who use Mac computers. Is there a way to view the amount of KB's or MB's used after viewing a page? For instance: does looking at a Facebook page use 100 KBs? does looking at a YouTube video use 10 MBs?
    Thanks.

    There are a few things you can do to cut down on bandwidth. I set Firefox never to check the cache with pages online, so that if I go back to a previous page, it does not need to download again, but can be pulled out of the cache.
    browser.cache.check_doc_frequency - set to 2 (never)
    I use Flashblock to prevent Flash items from downloading automatically. If there is any Flash item you want to see, you click the icon over that space, and that one item will load but none of the others on the page will load until you want them to do so.
    I use Adblock Plus to block ads. This saves bandwidth as well, since it stops banner ads from being loaded, and blocks popup ads as well.

  • Is there a way to tell if you are in Web Start or Standalone mode

    Hello,
    I am working on a program that can be ran either in Web Start or Standalone mode. Is there a way I can tell inside the code which mode I am in?
    The reason why I ask is because if I am in Web Start mode I store files using the PersistenceService api... but of course this will not work in Standalone mode. So in Standalone mode I want to just store in working directory.
    thanks
    jose

    Check for presence of security manager.
    In webstart mode your code will run in the sandbox (even if it is singed security manager will be installed).
    Or you can simply use class for name to lookup for PersistanceService. It is not on the default classpath for standalone application.

  • Is there a way to refer library present in one web application from another

    Hi All,
    I have two web applications deployed in same server. I have a common library for both web applications so i dont want to duplicate it by putting it in WEB-INF\lib of two web applications.
    Is there a way to make it avialble for both application by maintaing the library in one place?
    Thanks,
    Kishore

    You could put it in the common area of your application server, whatever it is. But if it were me, I would just put one copy of the library in each web application. Less scope for classloader problems that way.

  • Is there any way to reduce the JPEG compression ap...

    I'm wondering if there is any way to reduce the fierce amount of JPEG compression applied to photos taken with the 6220 classic? I'm 99.99% sure that there isn't, but I thought I'd ask anyway.
    I'm a professional graphic designer with 15 years experience, and as such understand the technicalities of digital imaging better than most.
    What the general public fails to understand is that ever higher megapixelage doesn't automatically equate to ever higher quality images.
    The 6220 classic has a 5MP camera, which is one of the reasons I bought it, along with the fact that it has a Xenon flash and a proper lens cover. Its imaging quality also generally gets very positive reviews online.
    However, the 6220 classic takes far poorer photos than my 5 year old Olympus digital camera which only shoots 4MP. Why is this? Many reasons. The Olympus has a much larger imaging chip, onto which the image is recorded (physical size as opposed to pixel dimensions), a far superior lens (physical size & quality of materials), optical (not digital) zoom, and the ability to set various levels of JPEG compression, from fierce (high compression, small files, low quality images) to none at all (no compression, large files, high quality TIFF-encoded images).
    When I first used the camera on the 6220 classic (I've never owned a camera phone before) I was appalled at the miniscule file sizes. A 2592 x 1944 pixel image squashed into a few hundred kilobytes makes a mockery of having decent pixel dimensions in the first place, but then the average consumer neither cares about nor would notice the difference. They're not going to be examining & working on their images in Photoshop on a 30" Apple Cinema Display.
    Is fierce JPEG compression (and an inability to alter it) the norm with camera phones, or do other camera phones (perhaps from other manufacturers) allow greater latitude in how images are compressed?
    Thanks.
    Solved!
    Go to Solution.

    Believe me, I was very aware that this was a phone with a camera attached, not a dedicated camera, before I bought it. I went into this with my eyes open. I knew the lens, imaging chip, zoom, etc, would all be grossly inferior, but given all of this, surely the phone manufacturers should help to compensate for this by adding a few lines of code to the software to reduce (or ideally remove) the JPEG compression, or at least give the user the option to do so if they want? The fierce compression just makes images obtained with compromised hardware even worse than they would have been otherwise.
    It adds insult to injury and is totally unnecessary, especially given that the memory card in the 6200 classic is 1GB but the one in my Olympus is only 128 MB! It's not as if lack of storage space is an issue! On the Olympus I can only take about 8 pictures without compression (although I could obviously buy a much larger memory card). On the 6220 classic, given the ridiculous amount of compression, there's room for over 1200 photos! It would be far better to let 70 uncompressed images be stored than 1200 compressed ones. Does anyone seriously need to take over a thousand photos on a camera phone without having access to a computer to offload them? I doubt it.
    Also, compressing the images requires processing power, which equals time. If they were saved uncompressed, the recovery time between shots would be reduced, although obviously writing the larger files to memory may offset this somewhat.
    Just to give people an idea, an uncompressed 8-bit RGB TIFF with pixel dimensions of 2592 x 1944 takes up approximately 14.5 MB of space. (The exact number of bytes varies slightly depending on the header information stored with the file). The 3 photos I've taken so far with the 6220 classic (and that I've decided to actually keep) have files sizes of 623, 676 & 818 KB respectively. An average of these 3 sizes is 706 KB. 706 KB is less than 5% the size of 14.5 MB, which means that, on average, the camera, after is records the 5038848 pixels in an image, throws over 95% of them away.
    I'm deeply unimpressed.

  • Is there a way to create a jpeg of a video inserting the "play" watermark?

    I would like to create a jpeg of a clip in a video that I have created in iMovie and have that clip have a "play" watermark on it.... so then I can insert it in an email and have it link to where I have the video stored.
    Let me know if you know if this can be done in iMovie or some other software.

    Direct Download Links for Adobe Software
    For proper deployment, sign up with the dev center/ enterprise deployment.
    Mylenium

  • Is there a way to have a jpeg picture show up in notes?

    I want a jpeg picture to show up in notes.  While I can drag it into the notes window, it shows up as an attachment (paperclip) on my iPhone.  How do I open the paperclip?

    Just make sure that you do a back up. I personal force the iCloud back up as well as a computer back up. This was my first iOS upgrade where I had a problem, I've been doing iOS upgrades since iOS3 or 4.
    I'm glad that I did those back ups because I needed them. Well one of them though.
    KOT

  • Is there a way to view only desktop versions of web pages on the iPad?

    Samsung galaxy a smaller actual mobile has the option to do this.. I've seen this question before and some people were wrong in saying that its up the programming discretion of the host website. It doesn't work for every site on my galaxy but it does for majority of pages I try it on. This tablet screen resolution and processor should allow any and every web page to be fine with viewing desktop versions and not limited mobile versions. This is why I try to tell my friends Apple is amazing but they aren't superior to all others. It's like being a sheltered kid who finished school and is working for his dads company (apple ) vs being out in the real world  (windows)
    I digress..
    Is there an app I can download or some way I can program my iPad myself so it only opens desktop versions and gets flash player ? Also if anyone knows any websites where I can teach myself programming codes and mods that would really help also. Thanks

    King_Penguin wrote:
    There are third-party browser apps that have settings within them to identify themselves as full browsers e.g. Atomic Web, and I believe the iCab Mobile browser also does (I don't have it so i can't check)
    iCab indeed does allow for that

  • Is there a way to search for state in a web app then show results ?

    Hi,
    So what i am trying to do is search my web app data, first step is i ask a question like I am after 4 machines or less, then i ask i am after 5 machines or more, then what i want to do is group the results by state/province then the total number where it be 2, 4, 5 ect click the number then show the results for the state selected.
    Basically is there way to create your own search for a web app or are you basically left with what the system does ...
    Any help would be appreciated.
    Regards
    George

    What Anjaneai also means to say is that Adobe has neglected to provide a Usage button for variables as they have for Advanced Actions and Library objects so that you can see exactly where they are used.  This is a BIG problem when you have a lot of variables and AAs to search through.
    By all means log an enhancement request and add your voice asking for this VERY necessary feature.

  • Is there a way to allow contributor users to add web parts to a page without granting them "Add and Customize Pages" permission?

    I am working on an enterprise wiki site collection, and when contributor users try to add web parts they will get the following error:-
    A Web Part or Web Form Control on this Page cannot be displayed or imported. You don't have Add and Customize Pages permissions required to perform this action.
    So I granted the Contribute Permission level an extra permission which is “Add and Customize Pages”. Now contributors will be able to add/edit/delete
    web parts. But they will have extra permissions that I do not want them to have , such as changing the design and customize some page layouts, also they can access the site settings and create site columns !!.
    So my question is basically if there is another way to allow users with contribute permission to be able to add web parts without granting any extra permission. In other words to treat adding web parts as normal content such as image, Text ,tables ?
    Thanks

    I dont think so.
    http://technet.microsoft.com/en-us/library/cc288074%28v=office.14%29.aspx
    Add and Customize Pages
    Add, change, or delete HTML pages or Web Part pages, and edit the Web site by using a Windows SharePoint Services-compatible editor.
    View Items, Browse Directories, View Pages, Open
    Design, Full Control 
    If this helped you resolve your issue, please mark it Answered. You can reach me through http://freeit-support.com/
    so there are not any workarounds or any custom settings which i can use to implement any of these:-
    - To force Contributor users to add web parts without granting them "Add and Customize Pages"
    - If i grant them "Add and customize Pages" permission, to stop the ability to access the site settings ?
    Please can any one advice on this , as it is causing a lot of confusion,,, and i can not live with the face that Contributor users can access and modify site settings. the other approach will be is that i will stop using web parts. but one of our main reasons
    we decide to use SharePoint is the ability to add web parts, especially the Visio & Excel web access web. thanks in advance for any advice ..

Maybe you are looking for