Is there a way to convert a node locked ISE Design Suite license to Vivado?

Hi, I have not worked on the ML605 board for nearly 3 years. At that time, I was using the node locked ISE license that came with the ML605 kit. I think I was using ISE 13.2 or 13.4 at that time. I had a few problems on 64 bit, and don't want to think about ISE again (and from Xilinx response to ISE questions, it appears that Xilinx does not want to either).
Will the Vivado Webpack fully support the ML605?

Thanks for the explanation! I find it strange that Xilinx stopped working on ISE while continuing to support devices < family 7 (i.e. pretty much everything that people are actually shipping), but maybe Xilinx decided the existing bugs in ISE are trivial enough to warrant the decision. But if so, it would mean that Xilinx thinks the 64 bit ISE crash problems I reported 3 years ago are not show-stoppers (at that time, Xilinx support told me that they problem they found in ISE will be addressed in Vivado)...

Similar Messages

Is there a way to "mix" the nodes and leaves of the tree so if they are at the same level, they will display in a specified order.

Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
History:
We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5. Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree, not a "tree" table. This is our first attempt at the tree, so maybe we're missing something basic?
TK1
-Mat1
-Mat2
-Mat3
-Kit1
--Comp1
--Comp2
--Comp3
-Mat4
-Kit2
--Comp4
--comp5
--comp6
-Material5
displays as
TK1
-Kit1
--Comp1
--Comp2
--Comp3
-Kit2
--Comp4
--Comp5
--Comp6
-Mat1
-Mat2
-Mat3
-Mat4
-Mat5

co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
TK1
. Mat1
. Mat2
. mat3
> kit1
.. comp1
.. comp2
.. comp3
. mat4
> kit2
.. comp4
.. comp5
.. comp6
. mat5
displays at
TK1
> kit1
.. comp1
.. comp2
.. comp3
> kit2
.. comp4
.. comp5
.. comp6
. mat1
. mat2
. mat3
. mat4
. mat5
we can make it work if everything is a folder. This is our current workaround.
TK1
> mat1
> mat2
> mat3
v kit1 (when expanded)
.. comp1
.. comp2
.. comp3
> mat4
> kit2 (when not expanded)
> mat5

Is there a way to convert files incompatible with Apple OS to some format that will be viewable in Finder?

I do a lot of machine embroidery. In moving from a PC to Mac, I've learned that none of my current embroidery software is compaitible with Apple OS. I'm happy to maintain those programs on a Windows laptop, but would really like to be able to view my designs on the Mac Mini. The files are *.pes. Is there any way to convert them to a Mac compatible format?

NeedleWorks says it reads .pes files, Direct download...
http://needleworks.googlecode.com/files/Needle%20Works%200.5.pkg
http://mac.softpedia.com/get/Utilities/Needle-Works.shtml
Ryan Lovett | More programs
Freeware / FREE
80 KB / Mac OS X 10.5 or later
Universal Binary

Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
- Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
System: PC Windows 7 using Acrobat X Prof. - Thank you!

Hi ,
There is an option of embedding index for faster search while converting email to a PDF .
However I am not sure that will serve your purpose or not .
I would recommend you to get in touch with Microsoft support as well .
Meanwhile I'll work on it and get back to you in case I get a desired solution .
Regards
Sukrit Dhingra

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

Hello, 2 questionss here is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

Is there a way to convert DVD-VR movie into DVD-video to import in IMovie?

My husband shot 6 hours of video on a Sony DCR-DVD106E Handycam abroad, and had that burned on a dvd.
Unfortunely he shot this material with the camera in DVD-VR mode,and and now it's impossible to import and edit in IMovie. ☹ I discovered already that the camera should have been in Video-mode.
We do really need parts of the video for our work...........
Is there a way to convert the dvd so that it can be imported one way or another?

SDIllini wrote:
Perhaps Karsten Schlüter's website will help ou: ..
.. no, he.. ooh, it's me! .. can not.
that advice is for 'standard' videoDVD (=VIDEO_TS, vobs ifos, bups, walla walla...)
dvd_VR is a special format of dvd-corders..
I'm afraid, you have to take the long road via some converter box (Canopus, EyeTV, ...)

I cannot access AppleWorks 6, is there a way to convert them?

I just installed Mavericks and since I cannot access AppleWorks 6, is there a way to convert them?
I know AppleWorks 6 is old, but I have some documents that I need.
My windows laptop asks what I want to convert files into and I'm hoping there is something I can do?
Please help

1. Read Roger Wilmut's excellent series of articles, Abandoning Appleworks:
http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html
2. If you need to run Appleworks 6 to export some data (for example a database, which cannot be opened by any other program):
a) (Assuming your Mac will still boot into Snow Leopard, since you said you recently "upgraded to Mavericks"), Partition your hard drive (or add an external hard drive) and install Snow Leopard (and the optional Rosetta) into it and use the "dual-boot" method to boot into Snow Leopard and run Appleworks 6; or
b) Install Snow Leopard Server into Parallels and run Appleworks 6 concurrently with Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439
Installing Snow Leopard Server into Parallels for DUMMIES!:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

Is there a way to convert .wmv's to .gif's with Photoshop Elements 10?

Is there a way to convert .wmv's to .gif's with Photoshop Elements 10? If not, will an up upgrade to version 12 include something that will do this?

I have done it manually, and it takes a long time just for 1 patch.
Just the sample editing and naming takes hours!
Autosampler automates this process.
You can define how many velocity levels you need.
If a midi CC changes the sound in an interesting way, you can have Autosampler send the controller in increments and sample that.
At the end of it, you end up with a finished EXS instrument.

Is there a way to convert the wireframes created in InDesign to a clickable prototype?

I have created wireframes in InDesign and trying to convert to a clickable and working prototype. Is there a way to convert the wireframes created in InDesign to a working prototype as HTML or clickable PDF?

Yes, there are ways (read: you can find ways) to accomplish that, but it isn't really an intended workflow, so nothing about it is "automatic." In the time it will take to make a functional wireframe prototype with InDesign, you could be building the actual site. The features you need for rapid prototyping are found in Fireworks.

Is there a way to convert an interactive PDF of photos into a file that plays like a video?

I have a PDF with music created through InDesign, but Acrobat only allows the pages to self-turn if played in full view mode. This cannot work on a website. So, is there a way to convert this PDF into a "video" such that the pages turn automatically, like what Apple Iphoto does when you create an album or slideshow or book - it allows for a "video" of the imags to be created, with backdrop of music?

http://forums.adobe.com/community/indesign for program questions... or http://forums.adobe.com/community/acrobat

I've just updated my Macbook to Mavericks and all my .avi files storaged in a Lacie Rugged aren't opening but converting one by one I opened; are they not compatible?. Is there a way to converting all of them simultaneously and faster? Thanks a lot guys

I've just updated my Macbook to Mavericks and all my .avi files storaged in a Lacie Rugged aren't opening but converting one by one I opened; are they not compatible?. Is there a way to converting all of them simultaneously and faster? Thanks a lot guys

Have you tried using VLC media player it seems to play almost any codec without converting.
https://www.macupdate.com/app/mac/5758/vlc-media-player

Now that the new macbook pro has usb 3.0, is there a way to convert my current macbook's usb 2.0 to 3.0?

Now that the new macbook pro has usb 3.0, is there a way to convert my current macbook's usb 2.0 to 3.0?

No you can not.
You can connect USB 3 components to you MB if you wish to use them but will only run at USB 2 specs.

Is there a way to convert .x32 xtra file to .w32 file?

Hi All,
There is a 3d engine (xtra) for director:
http://irrlicht.director3d.de
The engine is working fine with director and I can publish exe files with it.
The problem is that I can't publish it for web because I don't have the engine's xtra .w32 file for it (I have only the .x32 file)
Is there a way to convert .x32 xtra file to .w32 file?
Thanks

Is there a way to convert .x32 xtra file to .w32 file?
No - you have to have the source to compile to w32 or the equivalent Mac auto-downloadable package. Try contacting the author.

Is there a way to convert REASON's .sxt files to LOGIC's .exs format???

Is there a way to convert REASON's .sxt files to LOGIC's .exs format???
From the NNXT sampler file format to the EXS24 format???

I have done it manually, and it takes a long time just for 1 patch.
Just the sample editing and naming takes hours!
Autosampler automates this process.
You can define how many velocity levels you need.
If a midi CC changes the sound in an interesting way, you can have Autosampler send the controller in increments and sample that.
At the end of it, you end up with a finished EXS instrument.

Is there a way to convert a node locked ISE Design Suite license to Vivado?

Similar Messages

Maybe you are looking for