Is there a way to convert .x32 xtra file to .w32 file?

Hi All,
There is a 3d engine (xtra) for director:
http://irrlicht.director3d.de
The engine is working fine with director and I can publish exe files with it.
The problem is that I can't publish it for web because I don't have the engine's xtra .w32 file for it (I have only the .x32 file)
Is there a way to convert .x32 xtra file to .w32 file?
Thanks

Is there a way to convert .x32 xtra file to .w32 file?
No - you have to have the source to compile to w32 or the equivalent Mac auto-downloadable package. Try contacting the author.

Similar Messages

  • Is there any way to convert the ImportObject into an image file ?

    I have converted a FM document into MIF file format. FM has a grapic imported by copying into the document. In the MIF file I can see the image like the following,
    <ImportObject
      <Unique 1001019>
      <Pen 15>
      <Fill 7>
      <PenWidth  1.0 pt>
    =TIFF
    &%v
    &II*\x00080000001000FE000400010000000000000000010300010000006009000001010300010000…..
    Is there any way to convert the ImportObject inside the mif file into an image file ?

    Error 7103,
    Regarding Note A and Note B... The Downsample dropdowns list three variations of Downsampling TO, each corresponding to a different downsampling method. When you select one of the Downsampling TO options, then the pixels per inch box allow you to specify the dpi of the downsampled image, the one after the downsampling.
    When you select Off, which means do NOT downsample, then the pixels per inch box is meaningless. Maybe it would be a nice interface feature to disable it, but that is another issue. In any event, OFF ignores any value in pixels per inch.
    Whenever you import an image into your publishing program (FrameMaker, InDesign, or whatever) and scale it, one can think of the scaled image as having a physical dpi, the number of pixels per physical inch on the "paper." When you specify downsampling in Distiller, the number you specify is most likely less than the physical dpi of the image in the document. It is probably meaningless to specify a number that is larger. I am guessing (and this is a guess) that Distiller does not UPsample images. I have never tested it.
    I use 1200 for image recovery.
    I assume you are talking about recoverying an image embedded in (copied into) the publishing document. I believe it is sufficient simply to turn downsampling off to create a PDF with the image at the resolution as embedded in the document.
    No, one of the settings is to Determine Automatically, which uses the resolution of the image IN the PDF.
    Where is that found?
    It is NOT in Distiller. It is in Acrobat Professional. (It may or may not be in Acrobat Standard or Acrobat Reader; I do not have them, so do not know.)
    The original poster wanted to recover an image copied into a Frame document file. My method is to create a PDF using a Distiller joboption with ALL downsampling and ALL compression OFF. Presumably the image is put into the PDF with all the pixels it has in the Frame file.
    THEN in Acrobat PROFESSIONAL, export the image with the setting Determine Automatically. I am presuming (never tested it) this exports ALL the pixels that the image has in the PDF file.
    Van

  • Is there any way to convert recorded actions into JSX Javascript file?

    For photoshop, there's http://ps-scripts.sourceforge.net/xtools.html (scroll down to "ActionFileToJavascript") which can convert recorded photoshop actions into jsx. Is there any such resource for Illustrator?

    AppleScript is able to script many things in the GUI.
    The problem is it becomes version specific when they move stuff about.
    CS6 can evoke some menus but is limited to those with keyboard shortcuts.
    CS6 also got action calls added... ( to JS )
    No nothing like action manager code exists in AI. ( a big shame )
    PS has a plug-in to record your steps...
    Giving you access to a whole range of app features beyond the regular DOM.
    Only today X has posted that that he's hanging up his boots here...

  • Is there a way to convert files incompatible with Apple OS to some format that will be viewable in Finder?

    I do a lot of machine embroidery. In moving from a PC to Mac, I've learned that none of my current embroidery software is compaitible with Apple OS. I'm happy to maintain those programs on a Windows laptop, but would really like to be able to view my designs on the Mac Mini. The files are *.pes. Is there any way to convert them to a Mac compatible format?

    NeedleWorks says it reads .pes files, Direct download...
    http://needleworks.googlecode.com/files/Needle%20Works%200.5.pkg
    http://mac.softpedia.com/get/Utilities/Needle-Works.shtml
    Ryan Lovett | More programs
    Freeware / FREE
    80 KB / Mac OS X 10.5 or later
    Universal Binary

  • Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

    Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
    - Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
    System: PC Windows 7 using Acrobat X Prof. - Thank you!

    Hi ,
    There is an option of embedding index for faster search while converting email to a PDF .
    However I am not sure that will serve your purpose or not .
    I would recommend you to get in touch with Microsoft support as well .
    Meanwhile I'll work on it and get back to you in case I get a desired solution .
    Regards
    Sukrit Dhingra

  • I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

    The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

    You must go in the labview option menu, you can select 'use the local
    separator' in the front side submenu (LV6i).
    If you use the "From Exponential/Fract/Eng" vi, you are able to select this
    opton (with a boolean) without changing the labview parameters.
    (sorry for my english)
    Lange Jerome
    FRANCE
    "Nina" a ecrit dans le message news:
    [email protected]..
    > I would like to read a text file in which the decimal numbers are
    > using dots instead of commas. Is there a way of converting this in
    > labVIEW, or how can I get the program to enterpret the figures in the
    > correct way?
    >
    > The program doest enterpret my figures from the text file in the
    > correct way since the numbers contain dots instea
    d of commas. Is there
    > a way to fix this in labVIEW, or do I have to change the files before
    > reading them in the program? Thanks beforehend!

  • Hello, 2 questionss here is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

    Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

    Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

  • Is there a way to convert DVD-VR movie into DVD-video to import in IMovie?

    My husband shot 6 hours of video on a Sony DCR-DVD106E Handycam abroad, and had that burned on a dvd.
    Unfortunely he shot this material with the camera in DVD-VR mode,and and now it's impossible to import and edit in IMovie. ☹ I discovered already that the camera should have been in Video-mode.
    We do really need parts of the video for our work...........
    Is there a way to convert the dvd so that it can be imported one way or another?

    SDIllini wrote:
    Perhaps Karsten Schlüter's website will help ou: ..
    .. no, he.. ooh, it's me! .. can not.
    that advice is for 'standard' videoDVD (=VIDEO_TS, vobs ifos, bups, walla walla...)
    dvd_VR is a special format of dvd-corders..
    I'm afraid, you have to take the long road via some converter box (Canopus, EyeTV, ...)

  • I cannot access AppleWorks 6, is there a way to convert them?

    I just installed Mavericks and since I cannot access AppleWorks 6, is there a way to convert them?
    I know AppleWorks 6 is old, but I have some documents that I need. 
    My windows laptop asks what I want to convert files into and I'm hoping there is something I can do?
    Please help

    1.  Read Roger Wilmut's excellent series of articles, Abandoning Appleworks:
    http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html
    2.  If you need to run Appleworks 6 to export some data (for example a database, which cannot be opened by any other program):
    a)  (Assuming your Mac will still boot into Snow Leopard, since you said you recently "upgraded to Mavericks"), Partition your hard drive (or add an external hard drive) and install Snow Leopard (and the optional Rosetta) into it and use the "dual-boot" method to boot into Snow Leopard and run Appleworks 6; or
    b)  Install Snow Leopard Server into Parallels and run Appleworks 6 concurrently with Lion, Mt. Lion and Mavericks:
                                  [click on image to enlarge]
    More information here:
    http://forums.macrumors.com/showthread.php?t=1365439
    Installing Snow Leopard Server into Parallels for DUMMIES!:
    http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

  • Is there a way to convert .wmv's to .gif's with Photoshop Elements 10?

    Is there a way to convert .wmv's to .gif's with Photoshop Elements 10?  If not, will an up upgrade to version 12 include something that will do this?

    I have done it manually, and it takes a long time just for 1 patch.
    Just the sample editing and naming takes hours!
    Autosampler automates this process.
    You can define how many velocity levels you need.
    If a midi CC changes the sound in an interesting way, you can have Autosampler send the controller in increments and sample that.
    At the end of it, you end up with a finished EXS instrument.

  • Is there a way to convert the wireframes created in InDesign to a clickable prototype?

    I have created wireframes in InDesign and trying to convert to a clickable and working prototype. Is there a way to convert the wireframes created in InDesign to a working prototype as HTML or clickable PDF?

    Yes, there are ways (read: you can find ways) to accomplish that, but it isn't really an intended workflow, so nothing about it is "automatic." In the time it will take to make a functional wireframe prototype with InDesign, you could be building the actual site. The features you need for rapid prototyping are found in Fireworks.

  • Is there a way to convert an interactive PDF of photos into a file that plays like a video?

    I have a PDF with music created through InDesign, but Acrobat only allows the pages to self-turn if played in full view mode.  This cannot work on a website. So, is there a way to convert this PDF into a "video" such that the pages turn automatically, like what Apple Iphoto does when you create an album or slideshow or book - it allows for a "video" of the imags to be created, with backdrop of music?

    http://forums.adobe.com/community/indesign for program questions... or http://forums.adobe.com/community/acrobat

  • I've just updated my Macbook to Mavericks and all my .avi files storaged in a Lacie Rugged aren't opening but converting one by one I opened; are they not compatible?. Is there a way to converting all of them simultaneously and faster? Thanks a lot guys

    I've just updated my Macbook to Mavericks and all my .avi files storaged in a Lacie Rugged aren't opening but converting one by one I opened; are they not compatible?. Is there a way to converting all of them simultaneously and faster? Thanks a lot guys

    Have you tried using VLC media player it seems to play almost any codec without converting.
    https://www.macupdate.com/app/mac/5758/vlc-media-player

  • Now that the new macbook pro has usb 3.0, is there a way to convert my current macbook's usb 2.0 to 3.0?

    Now that the new macbook pro has usb 3.0, is there a way to convert my current macbook's usb 2.0 to 3.0?

    No you can not.
    You can connect USB 3 components to you MB if you wish to use them but will only run at USB 2 specs.

  • Is there a way to convert REASON's .sxt files to LOGIC's .exs format???

    Is there a way to convert REASON's .sxt files to LOGIC's .exs format???
    From the NNXT sampler file format to the EXS24 format???

    I have done it manually, and it takes a long time just for 1 patch.
    Just the sample editing and naming takes hours!
    Autosampler automates this process.
    You can define how many velocity levels you need.
    If a midi CC changes the sound in an interesting way, you can have Autosampler send the controller in increments and sample that.
    At the end of it, you end up with a finished EXS instrument.

Maybe you are looking for