Is there a way to copy and paste the same changes in keyframes along the timeline?

Hi,
I was doing an effect (changing the parameters in keyframe editor) and I wanted to do the same effect in specific moments on the timeline. Is it possible to copy and paste the same effect on the keyframe editor?
Thanks

Following on from GFXZen, as well as repeating a series of keyframes as a regular pattern, if you need to move some of the repeats a little (to match moments in a soundtrack), use the Generate Keyframes command. That turns the extrapolated curves into editable and moveable keyframes.
There's more on information on keyframe extrapolation and generating keyframes at the bottom of this page from the Motion help system.
Check out the help information on the Transform Keyframes tool - you can use this to transform the keyframes of many parameters at the same time. Similar to using the option key when dragging keyframes in Adobe After Effects.

Similar Messages

Hello I want to switch from iPhone 3GS to 4, is there any way to copy and paste my text massages (sms) from iPhone 3 to 4

hello I want to switch from iPhone 3GS to 4, is there any way to copy and paste my text massages (sms) from iPhone 3 to 4

Take Full Backup through iTunes!!

Is there a way to copy and paste excel table contents to a pdf table form?

Is there a way to copy and paste excel table contents to a pdf table form?

It's not something I have tried before. Have you tried it, and what's happened?
Basically, copy/pasting tables is a bit of a problem - anywhere. Table formats are different in different circumstances - Excel, HTML, PDF, ...
If you copy a HTML table and paste it into an Excel sheet, the entire table will go into one single cell.
So most likely what you are trying to achieve will not work.

Is there a way to copy and paste info from an attachment on the ipad into a document or note?

I sent myself an email with an attachment to my iPad. I want to copy and paste the info from the attachment so I can have it accessible on the iPad either as a Note or a document. I've been able to copy the info but the Paste does not do anything. Anyone know a better way?

When you tap and hold down on the text selection that you want to copy - are you seeing the Copy Option pop up? if so, tap on the Copy button and it should turn blue when the text has been successfully copied. Then just go into Notes - tap on the + sign to create a new note - tap and hold down on the note page until the Paste option pops up. Then tap Paste and it should paste the text onto the sheet. It works the same way anywhere that you can enter text, a Pages document, a URL field in Safari - any place that you can enter text.
When the copy or paste buttons turn blue - the command has been completed successfully.

Is there a way to copy and paste a glossary, for use in a text that would be separately published by unit?

I just submitted my first textbook, and it only covers the first quarter of my course. I'm planning on submitting the others as I finish them. One problem that I think I will encounter, is that if I create each quarter as a separate iBooks publication, I won't have the continuity of the glossary throughout each publication. Another option is to simply add to the first quarter publication, using the same iBooks Author file, and publish the text as the 1st and 2nd quarters, then the 1st through 3rd quarters, then the 1st through 4th quarters, removing the earlier versions as I publish a newer version. (Why not just finish it, and publish it once? Because I'm currently teaching the course, and I want to make the material available as soon as possible--also, it's a course on computer programming, which is a subject that rapidly changes.) I've seen other iBook publications by the unit, and that has inspired me to consider publishing my text in four smaller installments, one for each quarter of a year-long, 2 semester course. But that brings me back to the problem of having one continuous glossary that would function in all four publications.
Any and all ideas are welcome! Thanks!

You're right, but I'm a little under the gun with my employer to get something out there, asap, and I unfortunately have a full time job that doesn't allow me to commit a block of time to finish the text in one shot.

The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?

I have recently switched from a PC to a MacBook Pro.
I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
This is the problem:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
Thanks!
Roderick Guerry
[email protected]

Roderick Guerry wrote:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
(In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
Roderick Guerry wrote:
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
Roderick Guerry wrote:
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to.

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

The same cuts that I have in this clip that i performed with the blade tool, I want to duplicate, copye, paste and apply to another clip. I want the cuts to mimic and be an exact same. I wish i could highlight the clip, click copy and then highlight the other clip and then click paste and the cuts apply.

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Why cant I copy and paste text from my book thats in the library?

Why cant I copy and paste text from my book thats in the library?

MCWEB wrote:
Can I Copy and Paste text from one Contact to Another on iPhone 3G?
You will be able to do copy & paste when 3.0 comes out this summer.
Or even better while the iPhone is connected to my PC can I view the address book on the iPhone and make changes using my PC keyboard?
No. You would make changes to the address book on your PC and then sync via iTunes.

Any way to copy and paste in Adobe. Basic and missing.

Any way I can perform the most basic copy and paste in Adobe Story?

It seems like to be an issue with the latest Adobe AIR version ( 14.0 )
To resolve this issue, please follow these steps:
- first, uninstall 'Adobe AIR'. (Application > Utilities > Adobe AIR Uninstaller)
- Download the previous version of Adobe AIR from this link
Archived Adobe AIR SDK versions
(look for 'Adobe AIR 13 runtime downloads' section and downlaod the Mac version)
- install this version and then launch Story again to verify

Is there a way to copy and apply changes to photos in iPhoto?

In previous versions of iPhoto, I was able to edit a photo (adjusting exposure, colors, etc.) and then copy and apply the same changes to other photos. I can't seem to figure out how to do this in iPhoto 11 (v 9.3). Is this capability still present, or was it removed? And, if the latter, is there a work around?

Duplicate annihilator
LN

Copying and pasting filters - WHY don't keyframes copy and paste?

A couple of months ago I posted about an issue I'd found with FCP (I'm using 4.5/OS 10.3.9 now, but I think I've had this problem since back on my old G4 system using 2.02/OS 9.2.2). Simply, when "Pasting Attributes", and selecting "filters", the filters thusly pasted do not - I repeat, do not - contain keyframes.
I received a bunch of pooh-poohs from the cognescenti, basically telling me I was crazy and that on THEIR systems pasting filters worked great. However, I've just tried to paste filters a second way, and gotten the same result. When I open the filters tab in the Viewer, and copy/paste the filter, the filter pastes fine...but with no keyframes.
I've tried placing the playhead at the first frame of the segment, on each keyframe in the effect, and at the last keyframe. The filter pastes with the initial (i.e., first keyframe) settings intact, but contains no keyframes.
Obviously, the workaround is to drag the filter into the Browser and drag it back onto the segment. No problem doing that...however, I just wanted to let all you doubting Thomases know that yes, Houston, there IS a problem.
However, upon researching this subject in the Apple Discussion board (thank god for tabbed browsing!), I notice that this is accepted behavior in FCP - several respondants noted that filters paste while keyframes don't. Why, then, paste the initial filter attributes from a copied filter? If yer not gonna paste the entire filter with keyframes, why not just paste the basic settings from the filter menu?
Also, let me note this: AVID lets you paste keyframes...(OK, OK, so its filter/efx setup is totally klugey compared to FCP...hey, I want FCP to have it ALL!)

I received a bunch of pooh-poohs from the cognescenti, basically telling me I was crazy and that on THEIR systems pasting filters worked great. However, I've just tried to paste filters a second way, and gotten the same result. When I open the filters tab in the Viewer, and copy/paste the filter, the filter pastes fine...but with no keyframes.
<
Cognoscenti? You mean the elitists? Man, those guys are such jerks.
If I'd been reading the thread I'd have said, "You can't paste keyframes on filters. Hasn't worked since v3.5. Stupid programming change. You must use paste attributes, replace content."
This is not a workaround, it's the paradigm. I usually do this: painstakingly set up effects, filters, motion and other attributes in a clip that sort of stands by itself. Select and duplicate or paste this master clip somewhere convenient so I have a copy of it. Go back to browser to find the next clip to which I wish to apply this same collection of mods, load it into the viewer, or not, and copy. Select the master clip, paste attributes, content only.
Also, let me note this: AVID lets you paste keyframes...< </div>
Oh, you're one of THOSE! So does After Effects but neither of those apps were designed for Apple. What's an Avid?
bogiesan

Oracle Quality: Need a way to copy and paste collection plan records

Hi,
We use a Quality collection plan, along with a few child plans, to store inspection requirements. The user wants to be able to copy an existing plan record and paste to a new record for further updates. Any good ways to accomplish that?
Please advice. Thanks!

Hi,
User want this functionality during the transaction or when updating collection plan results in Quality result?
Ashish

Is there a way to copy and array an object/ image in Illustrator??

I am looking to copy an images a number of times around a circle, is there a way to this without having to copy individually?

Drag your art to brushes palette
Choose Scatter brush
Draw a circler
Apply the brush
to tweak, double click on the brush you made in brushes, change values, then ok and apply to strokes
For number of times, adjust the spacing value. Try changing rotation relative to: path

I am copying and pasting into a new, Pages document (from the word processing menu), and I paste in text that is longer than one page, it doesn't continue onto the next page. I can't see the end. How do I get it to show everything I paste in?

I want to copy an extensive amount of text from a web page into a Pages word processing document, but it seems to chop it up into text boxes, some of which aren't long enough to show all of the lines of text. I can't get hold of a bottom edge of the boxes to drag them to make them longer. I tried several times starting over with a new, blank page (and I made sure to choose from the Word Processing part of the dropdown menu, since I read about a similar problem that said not to use the layout menu. It keeps doing the same thing. What do I have to do to get long text pasted to multiple pages, instead of it trying to be all on one page?
In the long run, what I want is to create this as an ePub book. Is there a better way to go about this?

Hi Ellen,
Copying from web pages can include some weird formatting. Instead of Paste, use Paste and Match Style (Edit Menu).
Regards,
Ian.

Is there a way to copy and paste the same changes in keyframes along the timeline?

Similar Messages

Maybe you are looking for