Is there a way to create a corrective work order off a prevenative workore

Hello,,
Is there a way to create a corrective work order off a preventive/inspection work order. Or is there a way to indicate that a corrective work order was created from preventive/inspection work order. In addition is there a way to report these changes.
Thanks.

Yes, first take your PM WO#, and go to Transaction IW36<p>
<p>
This process is how to create a "sub-order"<p>
<p>you will be asked to enter in the "superior order", in this case it will be the PM Work Order you want to be the "parent"

Similar Messages

Is there a way to create a local package repository

Is there a way to create a local package repository without technically being a mirror. For example, setting up multiple AL box's on my network and having them grab all the latest packages from one AL box?
Thanks,
Craig

What you most likely want is an ABS tree of your own, containing only the PKGBUILDs of those packages which you want to be included in your repository.
You should already have heard of the gensync program. In short, the parameters are the root of PKGBUILDs, sorted in subdirectories (ie. like the ABS tree), the intented name and location of the repository database file, and the directory containing the binary packages.
Let's assume you downloaded the current ABS tree to your hard drive, as well as all matching (same version as in the PKGBUILDs!) packages from a mirror, but you don't want the reiserfsprogs package in your repository. To achieve that, you must remove the /var/abs/base/reiserfsprogs directory, and may optionally remove the binary package, too. Since gensync analyzes the ABS tree you supplied as a parameter, removing the subdirectory of a specific package will cause this very package to not be included in the generated database. Assuming your packages lie in /home/arch/i686/current, your gensync call would look like this:
gensync /var/abs /home/arch/i686/current/current.db.tar.gz /home/arch/i686/current
If there are any discrepancies like
- PKGBUILD, but no matching binary package found
- PKGBUILD and binary package versions do not match
- permission problems (writing the db file must be possible)
gensync will gladly complain.
Otherwise you should find the db file in the place you specified. Keep in mind that the name of the db.tar.gz file must be equal to the repository tag in the pacman.conf to use the repo.
To make sure the db contains the right packages; use
tar -tzf current.db.tar.gz | less
to list the contents. Every package has it's own subdirectory including the metadata, which is rather obvious considering the file's generated from such a structure in the first place.
The binary packages along with a correctly generated db file are all you need. Make the repository directory containing these files available through FTP if local availability doesn't cut it for you, edit your pacman.conf if needed, and use it!
Adding packages works similar; All you need to have is the PKGBUILD in an ABS-like tree (it doesn't have to be the official tree; gensync doesn't care where the files come from. Just stick to one subdirectory per PKGBUILD, and you'll be fine), and the matching packages somewhere else, run gensync with the appropriate directories, and cackle with glee.
HTH.

Is there a way to create "temporary" tables in SAP database?

Hello,
Is there a way to create temporary tables in ABAP?
Here is our scenario:
1. Invoke a custom RFC that creates a temporary table and returns the name of the table.
2. Invoke another custom RFC and pass this table name as parameter. This RFC internally does some INNER JOIN with the temporary table.
3. Invoke the third RFC to delete the temporary table.
Note that the name of the table cannot be static. We have many users using our application simultaneously and connecting to the SAP server.
I would appreciate it if you could point me in the right direction.
Thank you in advance for your help.
Peter

I just ran into a similar issue. While only calling the select statement 2 times, each time had so many entries in the 'for all entries' list, that the compiler converted this into about 700 calls to the select. Now since the select joined three real tables on the database, the trace shows this one select as being the slowest item in this application.
I think that happened because 'for all entries' gets converted to an 'IN' clause, and then the total number of characters in any SQL statement has an upper limit. So the compiler must make the select statement over and over until it covers all entries in the 'for all entries' list. Is that correct?
Since every database I ever saw has the concept of db temporary tables, I have used db temp tables many times for this sort of thing.
The ABAP compiler could determine that more than one IN statement will be need, then use an alternate: write all the FOR ALL ENTRIES to a db temp table, then join on the db temp table, then drop db temp table. Since the compiler does this sort of thing, no application code needs change to get the speed boost.

Is there a way to create custom page numbering (ie 1, 2, 2, 3, 3, etc.)?

I have a document that needs special treatment for its page numbering. This is a two page spread that I need to have the same page number on facing pages. The page numbering would look like 1, 2, 2, 3, 3, 4, 4 and so on. I have looked through the forums and all the help documentation I can find, and the only thing remotely related is doing a print merge of two documents - but this doesn't solve my need to have the numbering scenario in the actual document. Is there a way to create a macro or script that I can add to the master pages that can calculate the correct page number? This is an Instructor's Guide that is well over 300 pages so I'm looking for some way to automate the process.

Just if I understood your need correctly... Automatic Page Number shows the number of the page, where center of its text frame lies. The actual number may be on other page. Please see attached screenshots:
and this is what you need:

Is there a way to get the correct order from the dependent types of a sche

Hi ,
I have a CT facing the following problem:
When trying to built a SQL script to create all the object types within a schema using the DBMS_METADATA packages.
Did insert in a table the names of the types that will be exported following a concrete order, next loop into the table and call the DBMS_METADATA package for each row.
These type are depedent between them, there are some type attributes calling other types and here the issue
First : try to generate the order by created column of dba_objects and when the generated SQL script is launched a lot of type appearing as incomplete state due to the order isn't correct.
Second : try to insert the table ordering by object_id colums of dba_tables view, it appears incomplete types too.
Currently want to insert the table using a recursive query with connect by against the dba_type_attrs starting with the rows when ATTR_TYPE_NAME is not null (the types that are called by other types), but this way has a issue dificult to resolve: the roots of hierarchy are the rows when ATTR_TYPE_NAME is not null and we've dependencies between roots nodes
The question is is there a way to get the correct order from the dependent types of a schema?
Platform: IBM SP AIX
DB version: 9.2.0.7
Any help will be appreciated .
Thanks in advance.

The xxx_dependencies view should give you the dependencies betwee nthe various types. I would look at something along the lines of:
SELECT object_name, referenced_name
FROM (SELECT o.object_name, d.referenced_name
      FROM user_objects o, user_dependencies d
      WHERE o.object_name = d.name(+) and
            o.object_type = d.type(+) and
            d.referenced_type(+) = 'TYPE' and
            o.object_type = 'TYPE')
START WITH referenced_name IS NULL
CONNECT BY PRIOR object_name = referenced_nameThe outer join between user_objects and user_dependencies is required to generate the names of types which are not dependent on other types, or do not have other types dependent on them.
HTH
John

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it.

My boss cannot create a new subfolder by pressing "new folder" until he's already saved the file to his desktop. A "read only" error appears the first time. Is there a way to create and save to subfolder directly? It's Mavericks/Macbook Pro

Hi, when my boss wants to save a new file in a new subfolder, he presses "new folder" but cannot create a new one because a “read only” error box appears. Once he saves the file to his Desktop he clicks on “save as” again and then he can create a new subfolder by pressing “new folder.” Is there a way to create and save to a subfolder directly without having to first save somewhere else?

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

Is there a way to create a year at a glance with detail and print?

Is there a way to create a year at a glance with detail and print?

To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time?

Is there a way to create a PDF form that ANYONE can fill out and SAVE with their content?

Is there a way to create a PDF form that ANYONE can fill out and SAVE with their content? By anyone, I mean someone who can download and use the free Adobe Reader, on either a Mac or PC. I have Acrobat Pro, and would like to be able to create forms that can not only be filled out and printed, but saved and emailed, which is not an option with the forms I have created to date. They can be filled out, but not saved, with Adobe Reader.
TIA,
Nancy

To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time?

Is there a way to create a collection based on the "previous import"?

is there a way to create a collection based on the "previous import"? that would make it easy to mobile sync the last import to my ipad, and do further picking/rejecting while away from my laptop.

well, yes, of course i could do it that way. i guess i wasn't specific enough. is there a way to create a smart collection, with the photos in the "previous import" as members of the smart collection. earlier i mentioned about using this smart collection to mobile sync with my ipad, to do further flagging.
so my intention, use a smart collection to mobile sync with my ipad, and the smart collection to include the photos from my previous import.
i guess another way to ask the question, is there a way to create a smart collection, by using some rule or condition in the smart collection, to automatically include previous import photos.
the documentation says that "previous import" is a collection, even though it shows up in the catalogue side bar section. but i see no way to choose that collection when making a smart collection.
jd

Is there a way to create a playlist from the now playing screen on ios7?

Is there a way to create a playlist from the now playing screen on ios7? I want to be able to hear a song in my collection and immediately add it to an existing playlist or create a new playlist.
Thank you in advance

Hi Cornellius,
From the now playing screen there's a Create button at the bottom that allows you to create a
Genius Playlist
New Station form Artist
New Station from Song
IPhone Help, Browse and play
http://help.apple.com/iphone/7/#/iph3cf21a82
The Now Playing screen provides playback controls and shows you what’s playing.
For information on Genius Playlists, see
Archived - Genius for iPod and iPhone
http://support.apple.com/kb/HT2978
I don't see an option to add it to an existing playlist.
Best Regards,
Nubz

Is there a way to create user logins or some other way to ...

Is there a way to create user logins or some other grouping for a set of applications to use (memory) resources optimally -- for example only mail and Safari and Word in one grouping and another for Safari and an audio recording application, etc.?

It is possible to use Parenal Controls to limit which applications can be used be a particular user account.
But it's not really necessary as far as managing memory.
Matt

Is there a way to create three different physical calendars in ical so that I can get a fiscal view of the calendars?

Is there a way to create three physically different calendars in iCal so that I can view the calendar and events from a fical point of view?

iCal just shows the calendars you have created in your account(s). So if you are using iCloud just log into your iCloud account in a web browser and make as many new calendars as you wish to have. Then enable those in iCal.
If you use Google accounts or something else for the calendars, then create them as needed, and enable them in iCal.
I have several separate calendars all displayed in iCal - a couple linked through my Gmail accounts, and one through my iCloud account. Each uses a different default item color so they are distinct in iCal.

Is there a way to create scripts to use tmconfig...

Is there a way to create a script to execute tmconfig and change CLOPTS parameters
for a particular server?
Here is what I would like to accomplish. Want to set "-r" option to a limited
number of servers, on an as needed basis. I do not want to bring down the environment
and update the ubbconfig file. The support people are not familiar with tmconfig.
So, I would like to create a script to turn the "-r" option on when needed and
restart only those servers and then turn it off once the debufgging is done.
Is there any command other than tmconfig, which I could use to accomplish this?
James

If you've got perl on your machine, you can download the tuxedo perl module and
write perl scripts to call tuxedo services. There's also a tuxedo::admin module
at cpan now.
"james mathew" <[email protected]> wrote:
>
I am sorry Roopesh. ud worked with the command 'ud32 with -Ctpsysadm
-Utpsysadm
first time when I tried, I used our tuxedo admin id instead of 'tpsysadm'.
When
tried with 'tpsysadm' it worked.
Thanks a lot.
James
"james mathew" <[email protected]> wrote:
I tried the options, but didn't help. By the way, I cannot find anydescription
on "-C" option in the reference guide.
I tried to use a client program, similar to ud, which is developed locally
to
test the services.
When I send request to '.TMIB' service, the client never gets any reply
back.
The input userd is
service_name .TMIB
TA_OPERATION GET
TA_CLASS T_SERVER
In the ULOG, I see the following error messages.
120543.DEV_DB_SRV2!BBL.543.606.0: LIBTMIB_CAT:133: ERROR: Fielded buffer
access
error 2
120543.DEV_DB_SRV2!BBL.543.606.0: LIBTUX_CAT:6031: ERROR: Unable topre-process
buffer before tranmission. Error code(12/3474)
120543.DEV_DB_SRV2!BBL.543.606.0: LIBTUX_CAT:1286: ERROR: tpreturn could
not send
reply TPESYSTEM - internal system error
I have FIELDTBLS include 'tpadm' and FLDTBLDIR include '%TUXDIR%\udataobj'
What is causing the above errors.
"roopesh" <[email protected]> wrote:
run ud32 with -Ctpsysadm -Utpsysadm .
"james mathew" <[email protected]> wrote:
Thanks Sccott. Using ud32 is what I should do.
Now, I have a problem in using ud32 because the environment uses user
authentication.
I am not able to use ud32 due to logon failures. I am getting LIBTUX_CAT
errors
6311, 6247 and 6234.
I do not know what value am I supposed to provide for "application
specific
authentication
data". I think the environment variable TPIDATA stands for the samething.
Any help is appreciated.
Regards
james
Scott Orshan <[email protected]> wrote:
For scripting, you should use ud32 to call the MIB.
james mathew wrote:
Is there a way to create a script to execute tmconfig and change
CLOPTS
parameters
for a particular server?
Here is what I would like to accomplish. Want to set "-r" option
to
a limited
number of servers, on an as needed basis. I do not want to bring
down
the environment
and update the ubbconfig file. The support people are not familiarwith tmconfig.
So, I would like to create a script to turn the "-r" option on
when
needed and
restart only those servers and then turn it off once the debufggingis done.
Is there any command other than tmconfig, which I could use to
accomplish
this?
James

Is there a way to create a button that links to a website?

Is there a way to create a button that links to a website?
I was reading up that it's possible to this with menus, and tracks but can you do it with a button and how?
I am hoping to create a button that people viewing my discs on a computer can click on the link and their web browser will pop up and take them to a website.
Any help is appreciated.
Thanks.
-Fraky

dvd@ccess questions are being asked once a week on this forum, so I'll repeat why it's useless:
- Mac users have to enable the feature in the preferences of DVD Player in order to for the links to work.
- PC users have to install a small application on their PC, and they have to reboot the PC in order for the links to work.
- On top of this, it's still unreliable, and may not work on some computers.
It's a dog: Don't use it.

Is there a way to create a corrective work order off a prevenative workore

Similar Messages

Maybe you are looking for