Is there a way to create a due date in Reminders on the iPhone like you can in iCal, rather than just a reminder?

I realized that I can create due dates on iCal for tasks that sink to my reminders (so I am still reminded of a task, but also know when it NEEDS to be done). The problem is when I try to create a new task in reminders on the iPhone, it only gives me the option to set a time to remind me. I understand that this is the point on the app, but if it is going to sync with iCal, it should have the same functionality. I am curious if there is something I am overlooking.

I don't think so.  Reminders is very limited app.

Similar Messages

  • Is there a way to create multiple BQY output to one of the Job File ?

    Hello,
    I am using EPM11.1.2.3.501 version.
    BQY report due to the large amount of data, it is difficult to use a WebClient.
    So will share on a quarterly basis.
    However,
    If modifications are to occur,There are difficulties must modify each file.
    For example,
    Register 2014 1Q, 2014 2Q, 2014 3Q, 2014 4Q BQY Job file.
    When you run the job, the output of the job file is created.
    If the job file is changed, you must modify all four files.
    This will be only grow ations.
    Is there a way to create multiple BQY output to one of the Job File ??
    Please help me.
    Thanks

    It is not possible to have multiple BQY outpu into a job file.
    Thanks,
    KK

  • Is there a way to create folders on one iPad and sync the folders to multiple iPads?

    Is there a way to create folders on one iPad and sync the folders to multiple iPads? I have 23 iPads and I want to have all the folders match for easier access for students.

    Here is a possibkle workaround, assuming the iPads are all starting out with the same initial content on them:
    Backup that iPad to each computer you will be using. Then restore from the backup (only takes a couple minutes). Then rename the other 22 iPads.

  • Is there a way of using a mail merge function while on the iphone or ipad, i wish to email a "Word style, ot TXT" document to 250 of my contacts

    Is there a way of using a mail merge function while on the iphone or ipad, i wish to email a "Word style, ot TXT" document to 250 of my contacts, I have tried downloading my contacts to my PC's outlook but only 1 contact comes across at a time despite the fact that Icloud says downloading namedperson + 249 other contacts to a CSV file

    Hi everyone!
    Looking also for an app that allows me to merge email and send them out to each recipient individually. Apparently that's not possible yet. Here's what the guys at RedbitsApps told me about Group Email capabilities: 
    "The current version of the app relies on the device operating system to send the emails. For this reason, sending individual email instead of a single email to multiple recipients is not possible. Apple doesn't allow apps to send single emails to many recipients easily. We may use a custom sending software in a future version."
    Let's keep looking guys... 

  • Is there any way to export IT Resource data from OIM using the export tool?

    Hello,
    we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
    Thank you for your help
    Kind Regards

    Well , OIM doesnot provide any such facility to export ITResource data along with ITResource .
    Directly updating the DB could be an option ..
    Thanks

  • Is there a way to rate videos on the iPod like you can in iTunes?

    Is there a way to rate videos on the iPod like you can in iTunes? In iTunes I can assign 0 to 5 stars to a video. Can this be done on the iPod?
    Thanks.

    When I click the center button I only get the diamond that allows me to FF or RW with the track pad and if I click again I get the brightness adjustment but thats it. I have tried all the video types and it doesn't make a difference. If anyone has gotten this to work on their Classic please let me know. Thanks.

  • Issue: I synced my iphone with itunes, I then deleted many songs from the iphone, when I sync to itunes again is there any way to have itunes duplicate what it sees on the iphone rather than the other way around?

    Issue: I synced my iphone with itunes, I then deleted many songs from the iphone, when I sync to itunes again is there any way to have itunes duplicate what it sees on the iphone rather than the other way around?

    so, if I delete all music on itunes then connect my iphone all my music on the iphone will then be deleted?

  • SCOM 2012 - Is there a way to create a class/target/group based on the presence of a folder?

    I need to create monitor(s) for an application, but the application services are different on all the servers.  Usually I would find a application service that is common among all the servers I want to monitor to create the target,
    but this does not exist.  There are no common services for this application. However, every server does have a common folder in the Program Files on the C: drive (i.e. "xyz" folder exist on every server for the application). 
    Is there a way to create a target based on a folder in the Programs Folder?

    Please refer to the following, which is quite exactly fit your requirement.
    http://msdn.microsoft.com/en-us/library/bb437613.aspx
    Roger

  • Is there a way to create a file merge that updates from the original source file if changes are made?

    I have thousands of PDF documents that are merged with other files. I'll give an example so it's easier to understand.
    File #1 may be merged (or in a portfolio) with Files #2 and #3 but also in another merge (or portfolio) with Files #3 and #4.
    If I update File #1, is there a way for it to automatically update both of the merge or portfolio files with the updated File #1? (File#1 would be replaced, same name and location).
    I'm using windows and Adobe Acrobat Pro

    You would need to add favorites to the WebHelp output prior to creating a CHM. You would need something along the lines of: http://www.wvanweelden.eu/product/favorites-widget-webhelp
    But since it's in a CHM, I'm not sure whether you will be able to save anything from the webhelp output between sessions.
    Kind regards,
    Willam

  • Is there a way to create a virtual network using C# and the Azure SDK/API?

    I don't see a clear way to create an Azure Virtual Network using the SDK.
    I have all the methods to create the virtual network configuration, but no way to submit it:
    IList<string> VirtualNetworkAddressPrefixes = new List<string>();
    IList<string> LocalNetworkAddressPrefixes = new List<string>();
    IList<NetworkListResponse.DnsServer> DNSServers = new List<NetworkListResponse.DnsServer>();
    IList<NetworkListResponse.Subnet> Subnets = new List<NetworkListResponse.Subnet>();
    NetworkListResponse.Gateway Gateway = new NetworkListResponse.Gateway();
    IList<NetworkListResponse.LocalNetworkSite> LocalSites = new List<NetworkListResponse.LocalNetworkSite>();
    IList<NetworkListResponse.Connection> Connections = new List<NetworkListResponse.Connection>();
    VirtualNetworkAddressPrefixes.Add("a.b.c.d/cidr");
    DNSServers.Add(new NetworkListResponse.DnsServer() { Name = "TestDNS1", Address = "a.b.c.d" });
    Subnets.Add(new NetworkListResponse.Subnet() { Name = "Subnet-1", AddressPrefix = "a.b.c.d/cidr" });
    Subnets.Add(new NetworkListResponse.Subnet() { Name = "GatewaySubnet", AddressPrefix = "a.b.c.d/cidr" });
    Connections.Add(new NetworkListResponse.Connection() { Type = LocalNetworkConnectionType.IPSecurity });
    LocalNetworkAddressPrefixes.Add("a.b.c.d/cidr");
    LocalSites.Add(new NetworkListResponse.LocalNetworkSite()
    Name = "On-Prem",
    Connections = Connections,
    VpnGatewayAddress = "a.b.c.d",
    AddressSpace = new NetworkListResponse.AddressSpace() { AddressPrefixes = LocalNetworkAddressPrefixes }
    Gateway.Sites = LocalSites;
    Gateway.Profile = GatewayProfile.ExtraLarge;
    NetworkManagementClient netMgmtClient = new NetworkManagementClient(CloudCredentials);
    NetworkListResponse netlistresp = GlobalSettings.mainWindow.netMgmtClient.Networks.List();
    netlistresp.VirtualNetworkSites
    .Add(new NetworkListResponse.VirtualNetworkSite()
    Name = "TestVirtualNetwork",
    AddressSpace = new NetworkListResponse.AddressSpace() { AddressPrefixes = VirtualNetworkAddressPrefixes },
    DnsServers = DNSServers,
    Subnets = Subnets,
    AffinityGroup = "East US",
    Gateway = Gateway,
    Label = "LabelValue"
    I have also created the entire XML response and sent it to the NetworkManagementClient -> Networks.SetConfiguration() method, but it appears this command expects the virtual network to already be in existence. If anyone could give guidance, it would be
    appreciated.

    Hi,
    As discuss above , we have to create the XML response  ,before that first you have to
    GetConfiguration() details of existing virtual network. 
    string.format("@<NetworkConfiguration xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns='http://schemas.microsoft.com/ServiceHosting/2011/07/NetworkConfiguration'>
                <VirtualNetworkConfiguration>
                <Dns />
                <VirtualNetworkSites>
                <VirtualNetworkSite name=""{0}"" Location=""{1}"">
                <AddressSpace>
                <AddressPrefix>10.0.0.0/8</AddressPrefix>
                </AddressSpace>
                <Subnets>
                <Subnet name=""Subnet-2"">
                <AddressPrefix>10.0.0.0/11</AddressPrefix>
                </Subnet>
                </Subnets>
                </VirtualNetworkSite>",Networkname,location)+(@"<VirtualNetworkSite name=""demodsf1"" Location=""West Europe"">
            <AddressSpace>
              <AddressPrefix>10.0.0.0/8</AddressPrefix>
            </AddressSpace>
            <Subnets>
              <Subnet name=""Subnet-1"">
                <AddressPrefix>10.0.0.0/11</AddressPrefix>
              </Subnet>
            </Subnets>
          </VirtualNetworkSite>  </VirtualNetworkSites>
                </VirtualNetworkConfiguration>
                </NetworkConfiguration>")
    you have to append the node for existing node with new values , i got it its adding new virtual network 
    Best regards,

  • Is there a way to create a playlist that will not play the songs when shuffle is selected?

    I created a playlist of children's songs to play in my kindergarten classroom.  I placed these songs in a specific playlist so I could easilly access them when needed.  Problem is, when I'm working out, I don't want these songs to pop up in my "shuffle" mix.  How do I designate this playlist to only contribute songs when selected?

    You can also set the "Skip when shuffling" property of the children's songs to Yes. Select the songs, Get. Info., look on the Options tab.
    tt2

  • Is there a way to create different groups for my contacts using the installed contact app

    I am trying to make a group on my contacts. So that it's easier to just make messages to people and not having to make group messages every single time. For example, making a group for a sports team so that I can just message everyone in the group at once.

    No not possible but you can create contact groups at www.icloud.com and if you have contact synced thru cloud the groups you make at www.icloud.com will appear on your phone

  • Hello! Is there a way to create a shortcut that toggles on/off the checkbox "Allow pages to choose their own colors, instead of my selections above" located in Tools/Options/Content/Colors? I have to change this setting many times and need to speed it up.

    I have looked for add-ons that could automate this configuration change, but to no avail. Only web page actions can be recorded in a macro, but no configuration changes.
    A shortcut to get to the appropriate dialog box would help as well. I could manually tick/untick the box while saving all the several steps needed to get there. But I have not found it anywhere.
    Thank you very much for any help you can provide me.
    Best regards,
    Alex

    Hi, I want to drop a note to say thank you, cor-el. Your answer was better and faster than I could have expected. It not only solved my problem, but also opened new possibilities for more quick configurations.
    I am now obliged to follow your example and join this wonderful community of volunteers that help others to enjoy this fantastic browser.
    Best Regards!
    Alex

  • My iPhone was stolen. I can't replace my phone right now. Is there a way to take my photos from a backup of the iPhone and have them load on my IPad?

    I had my iphone stolen, and I cant replace it right now. Is there a way to extract pictures from my Iphone backup in itunes and restore the pictures to my ipad or Macbook Pro?

    I have this same problem.
    Were you ever able to find a solution to this?

  • Is there a way to create a table in powerpoint and allow the users to fill in answers?

    My beekeeping group wants a table layout question with dates, and the user would have to fill in the numbers after each day.
    Date
    Answer
    June 1
    insert drone fram
    June 5
    Check drone frame for mites
    June 9f
    Pull frame and freeze it to kill mites

    You'll have to create it in Captivate, importing ppt-slides just turns them into movie slides.

Maybe you are looking for

  • Accessing txt file in executable vi

    Hi, I have built a user interface for a project im working on. The data entered by the user on the interface is saved in a text file upon closing of the program. This is currently working fine but when I create an executable of my code, data is not w

  • What's the difference between shut down and log out?

    Hi, I have a MacBook Air and will sell it. I like to take out my name but don't know how. What will happen if I Log Out (my name comes after that)? What's the difference between Shut down and Log out? Help please, Thanks

  • Mac mini external speaker problems

    my mac mini using an audio interface (Lexicon: Lambda) and linking with external speaker (ADAM: A5x). they can play music and video smoothly before Mavericks update recently.  After the updated, I can't play music and videos with iTunes and youtube s

  • How to count files in a folder

    Hello! I have a folder with .txt files. If the file name is STRING i need to count all .txt files whose file names contain "STRING". For example, if there are STRING.txt, STRING1.txt,STRING2.txt.... in the folder, i need to find out how many of .txt

  • How can install face time on my ipad mini?

    I bought ipad mini and dont have face time how can i nstall face time apps?