Is there a way to create a video that is 1080x1920?

I have a project that will need to be displayed on a portrait monitor. I have elements 12.

Welcome to the forum.
As PrE only allows for more traditional Video formats, and all in horizontal/landscape orientation, I know of no way to setup a vertical/portrait Project. PrPro does allow for almost total customization, and can be set up to vertical/portrait, i.e. 1080 x 1920. This thread covers a bit of that: http://forums.adobe.com/thread/1334680?tstart=60 Note that it refers to PrPro (not PrElements), and the OP also wants to Import rotated/portrait footage, edit it in horizontal/landscape, then output to vertical/portrait - so not exactly what you are asking for.
Now, one might be able to create a traditional horizontal/landscape Project, then hack the Project's PREL file, which is but XML code, but I have never tried doing that, and have not read of it being done. However, in theory, it should be possible, but I do not know what the results would be. Perhaps ATR will have some thoughts on doing the Project hacking, and then outputting to a vertical/portrait file?
Good luck,
Hunt

Similar Messages

  • Is there a way to create a button that links to a website?

    Is there a way to create a button that links to a website?
    I was reading up that it's possible to this with menus, and tracks but can you do it with a button and how?
    I am hoping to create a button that people viewing my discs on a computer can click on the link and their web browser will pop up and take them to a website.
    Any help is appreciated.
    Thanks.
    -Fraky

    dvd@ccess questions are being asked once a week on this forum, so I'll repeat why it's useless:
    - Mac users have to enable the feature in the preferences of DVD Player in order to for the links to work.
    - PC users have to install a small application on their PC, and they have to reboot the PC in order for the links to work.
    - On top of this, it's still unreliable, and may not work on some computers.
    It's a dog: Don't use it.

  • HT202299 Is there a way to automatically upload videos that last more than 5 minutes on icloud ?

    I saw that icloud has a limitation of 5 minutes on the videos :
    Is there a way to automatically upload videos that last more than 5 minutes from iphoto/photos ?
    I'm trying to find a way to store my photo library on the cloud, AND keep to acces to each photos/videos from the net (not just storing the .iphotolibrary on the icloud folder) but i cant do it for the videos of more than 5min ...

    I believe you are probably referring to iCloud photo sharing. If you wait a while, the next version of Yosemite will include the new Photos application which will sync video through the iCloud photo library feature.

  • Is there a way to create a function that concatenates

    Hello,
    I constantly find myself needing to create a forumla tha concatenates employee's ID, last name, and first name.  Is there a way to create a function in Crystal that will allow me to create a function that already has this concatenation in place?  I am using Crystal XiR2.
    Thanks,
    Z

    Hi Zack,
    Custom function is a function that can be used in any report and it doesn't depend on database. We have to provide the values in order to claculate what we want and basing on the values provided it calculates accordingly. We cannot use global variables in custom functions and also evaluation time functions (like whileprintingrecords,whilereadingrecords). So I think it is not possible to get the strings concatenated without passing the values.
    Alternatively you can go for a query using Add Command like this
    select IDFirstNameLastName as value from table
    Regards,
    Raghavendra

  • Is there a way to create a rule that sends and Auto Response for a shared mailbox?

    I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
    [email protected]
    [email protected]
    [email protected]
    I would like to create a rule that would send an auto response when someone emails one of these addresses.  However, I don't want an auto response sent to [email protected] so I can't just set up an "out of office" reply for the mailbox.
    Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
    Nate

    Hi 
    we can enable the shared mailbox in ADUC and create Outlook rules for it in Outlook to achieve it. please follow these steps:
    1. In Active Directory Users and Computers, right-click the shared mailbox and click Enable Account.
    2. Configure the Outlook account for the shared mailbox in Outlook.
    3. Click Rules > Manage Rules & Alerts.
    4. Create a rule like the following format:
         Apply this rule after the message arrives
         Have server reply using a specific message
         Except if the subject contains specific words
         Select exception(s) (if necessary) of the Outlook Rule - (“except if from people or public group“)
    5. Apply the auto reply rules for this shared mailbox.
    Then users can receive auto reply of the shared mailbox except the exceptions we have set  when they send messages to this shared mailbox.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

  • Is there a way to create a guide that can't be cleared or removed?

    We are trying to create master logos that would have the name on it made with guides. This would give us a quick way of seeing if the master was placed. Can the guide be set so if someone clears guides this one would not be cleared? I think I know the answer just hoping someone might know of a way to do this.
    Thanks in advance.

    if the guides are on a locked layer they wont be deleted with the Clear Guides menu command.
    you can put your guides in a templated layer. the user can still unlcok the layer and delete them, but it would have to be more conscious.
    what i've done in my office when i need the same guide in every document is i made a script that creates this guides. so when someone delete them, it only took me a second to recreate them.

  • Is there any way to create a field that will auto increment i.e. document request id field?

    I would like to have a "Request #" automatically assigned to a form.  Is there any way to do that?

    We currently don't support this type of field. You can vote for this feature request here: http://forums.adobe.com/ideas/1047
    We use this to help prioritize our work.
    Randy

  • Is there a way to create a button that works the same as the ImageField?

    I am trying to create a button that acts like the ImageField tool. I want to be able to click on the button and it will direct me to browse for my photo that I want to attach.
    I am using LiveCycle. (I am a nooby and have limited skills when it comes to script)
    The ImageField function is to complex of a function for the use on my IPAD (PDF Expert APP). I can create a photo button using Adobe Form Creater and it works fine with the below script:
    event.target.buttonImportIcon ();
    This is a mouseup Action Event.
    My form that has been created in LiveCycle works perfectly on my IPad, except the photos. If I can simplify the function of the photos to act more like the Adobe Form Creater tool, then perhaps it will all work together.
    Any ideas, or is this just a waste of time? I have created the form over using Adobe Form Creater, but it has some limitations that make it not function as nice as LiveCycle's form.
    Thanks

    Not in Acrobat unless your image is already in the PDF format.
    This is a feature of forms created with LiveCycle Designer.

  • Is there a way to create a video for an ipad app to show users how to use it?

    I want to show end users how to use the Ipad app? Any suggestions/ ideas?!

    Maybe this can help you; http://www.labnol.org/software/record-screencasts-on-ipad-iphone/20958/

  • Is there a way to create a pdf that preserves all links from the origional document?

    Hi,
    I have a new, rather large, pdf document I need to create. After discovering that adobe will not reliably convert hyperlinks from an office document, I need a new strategy. Does anyone know of a program, other than office, that adobe will reliably convert the links in the origional document into links in the pdf? Or is there a different way to do this, other than adding links in adobe after I create the pdf?
    I have Windows 7, Office 2007, Acrobat Pro X, and IE 8 (I know... it's a work laptop)
    Thanks

    In iTunes, File>Print. Then select your options.

  • Is there a way to create a swatch that defaults to overprint?

    Our workflow at work is set up with 3 custom spot colors that I used to draw fold lines or label cover panels on customer's proofs. As long as I remember to set those guides to overprint in indesign they will not print when I send the files through our workflow.
    However, sometimes I forget to check the overprint box,  so i'm wondering if there is a way to set these swatches up just like the black swatch so they default to overprint?
    Thank-you!

    ghprintingdesigner wrote:... so i'm wondering if there is a way to set these swatches up just like the black swatch so they default to overprint?
    You can't do this in the Swatches panel however you can create a way to aid your workflow using object styles.
    Create a new object style for each type of line/fill you will use - Fold, Cut, Spot UV - and then just attach that object style to your line/fill. In the object style box, you can select to set the stroke or fill to overprint. You can then copy these object styles throughout your documents or just set up a template with these already in place.
    You can then double check it worked by selecting your line/fill and opening up the Attributes panel to see if Overprint is selected.

  • Is there a way to create custom clientlibs that only apply to a specific app?

    for example, i'd like to add some custom widgets specific to a custom application, say apps/mycustom1, but i don't want these custom widgets available for my other custom application, say apps/mycustom2.  this is because i plan to have a www.mycustom1.com and www.mycustom2.com.  from what i've read so far, you can add your own custom clientlib widget by adding to the categories "cq.widgets".  but if i do this, my custom widget will show up for mycustom1 and mycustom2 apps.
    on a somewhat related note, i've found that the following online doc: http://dev.day.com/docs/en/cq/current/developing/components/clientlibs.html, regarding overriding libraries in /libs, does not work.  i've tried creating my own apps/cq/ui/widgets clientlib, but all it did was include my apps/cq/ui/widgets clientlib along with the libs/cq/ui/widgets clientlib.  I have the clientlib set up the same way as the cq widgets clientlib and tried overriding the js.txt, but when loading my page, it pulls down both widgets.js in apps and libs.  are the docs incorrect here?
    thanks,

    I'm trying to do things "out of the box", which means i'm trying to reuse the existing clientlibs.  this means i'm making use of wcm/core/components/init/init.jsp, which includes the "cq.wcm.edit" clientlib.  i believe the easiest way for me to do this is for me to create a "custom.wcm.edit" category which will include my "mycustom1.widgets" along with "cq.widgets", but then this forces me to copy/paste the entire init.jsp into my apps folder.  i was hoping for a better way than to have to copy the entire init.jsp just to change up the specific categories used for a specific app.
    as for your question, i got down this path as i was trying to add my own custom placeholders to display in edit mode as i've created my own custom components.  but with what i've read online, the way to do it is just to add to "cq.widgets" with my own widgets clientlibs, which would make it available to all apps in the system.

  • Is there a way to create new keywords that are NOT subcategories of other keywords in PSE Organizer?

    I would like to create a new keyword in the Organizer that is not a subcategory of OTHER.
    Specifically I would like to create the keyword PETS, which could in turn have subcategories of different pets.
    Currently the only way I can do this is to create PETS as a subcategory of OTHER which I would prefer not to do.
    If this can be done, please advise me (in detail) how this can be done.
    I am using PSE13 with Windows 8.1 (64-bit) as my OS.
    Thank you, in advance, for your assistance.

    Hi,
    Have you tried selecting New Category from the drop down list?
    Brian

  • Is there any way to retreive deleted videos that were not synced

    I deleted a video on my touch and it was not synced to iTunes.   Is there anyway to retrieve it?

    No if taken by the iPod. You can redownload iTunes purchases by:
    'Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Is there a way to create a playlist that will not play the songs when shuffle is selected?

    I created a playlist of children's songs to play in my kindergarten classroom.  I placed these songs in a specific playlist so I could easilly access them when needed.  Problem is, when I'm working out, I don't want these songs to pop up in my "shuffle" mix.  How do I designate this playlist to only contribute songs when selected?

    You can also set the "Skip when shuffling" property of the children's songs to Yes. Select the songs, Get. Info., look on the Options tab.
    tt2

Maybe you are looking for