Is there a way to create multiple New Tabs pages and name them?

This feature is great but I would like to be able to create multiple new tabs pages and label them. This would be more useful than tabs groups that all load at once.

No that is (currently) not possible.
It will be possible in future Firefox version to specify the number of rows and columns.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=752841 bug 752841] - [New Tab Page] make the number of tabs adjustable
<i>([https://bugzilla.mozilla.org/page.cgi?id=etiquette.html please do not comment in bug reports])</i>

Similar Messages

Is there a way to create multiple BQY output to one of the Job File ?

Hello,
I am using EPM11.1.2.3.501 version.
BQY report due to the large amount of data, it is difficult to use a WebClient.
So will share on a quarterly basis.
However,
If modifications are to occur,There are difficulties must modify each file.
For example,
Register 2014 1Q, 2014 2Q, 2014 3Q, 2014 4Q BQY Job file.
When you run the job, the output of the job file is created.
If the job file is changed, you must modify all four files.
This will be only grow ations.
Is there a way to create multiple BQY output to one of the Job File ??
Please help me.
Thanks

It is not possible to have multiple BQY outpu into a job file.
Thanks,
KK

Is there a way to create a new Calendar that replicates all events

Is there a way to create a new Calendar that replicates all events from a subscribed calendar ? Mobile Me is great but my most important Calendar is technically in the "Subscriptions" category so it doesn't get pushed to me iPhone. I want to create a new Calendar and have it just automatically copy all the events from the subscribed calendar and keep up to date with that one.

lincolnroadjeff,
I subscribed to a Holiday calendar that I also wanted to be published, and the only workaround that I found was to export the calendar, delete the subscription, and then import the calendar.
This obviously will only work with a subscription that is not often updated/subject to change.
;~)

Is there a way to create a new directory or file in application install directory programatically

Hi to all,
Is there a way to create a new directory or file in
application install directory programatically.
I want a xml file to be created with in the application
install directory programatically(not the application storage
directory)
I have used the following code snippet:
var file:File = new File();
file = File.applicationDirectory;
file = file.resolvePath("assets");
if(!file.exists)
file.createDirectory()
I am thrown an exception when using this .....Security
Exception

Thanks, but my main problem is to delete the locally stored
data that is stored in the application storage directory when the
application is uninstalled.
The data is not being deleted automatically when the
application is uninstalled, thats why I want to write some file to
application directory.
My application is remembering the login username and password
even I uninstall the application and reinstall the next
time.

Is there a way to create folders on one iPad and sync the folders to multiple iPads?

Is there a way to create folders on one iPad and sync the folders to multiple iPads? I have 23 iPads and I want to have all the folders match for easier access for students.

Here is a possibkle workaround, assuming the iPads are all starting out with the same initial content on them:
Backup that iPad to each computer you will be using. Then restore from the backup (only takes a couple minutes). Then rename the other 22 iPads.

Is there a way to create multiple map tile layers at once?

Hello experts,
I have a small problem. It's mainly a matter of saving some time. I need to create 51 map tile layers in mapviewer, and I would like to this this at one time. I can go to the admin console-->Management-->Manage Map Tile Layers-->Create, and then I can create one at a time. But it really would be nice to create them all at once!
I tried using the XML mode interface, and I can use the following code to create one map tile layer:
<?xml version="1.0" standalone="yes"?>
<map_tile_server_admin_request>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
</map_tile_server_admin_request> And it creates one layer. But when I try this:
<?xml version="1.0" standalone="yes"?>
<map_tile_server_admin_request>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION_WY"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION_WY"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
</map_tile_server_admin_request>...it creates only the first map tile layer in my xml request.
Is there any way to create multiple map tile layers at once?
Thank you!
John

Michael,
It looks like you are right! Thank you for your help.
I still have a small concern. I looked at the documentation and it reads,
"The configuration settings for a cache instance are stored in the USER_SDO_CACHED_MAPS metadata view. You should normally not manipulate this view directly, but should instead use the MapViewer administration tool, which uses this view to configure map cache instances."
But, I tried inserting records into USER_SDO_CACHED_MAPS and it works, and I can't really see any reason not to directly insert records into this table, so...
Perhaps that warning is there simply because potentially you could screw things up tinkering with the table directly.
Cheers!
John

Is there any way to create multiple users in a single shot in oracle db

Can Any one tell me, is there any way to create multiple users in a single shot in oracle database.

Hello Nunhum,
I guess this was not my question.. This is not what I m asking.. I know there is not a single sql statement in oracle ,which could create multiusers alike UNIX/LINUX(OS LEVEL), Whatever you have written..is simple creating them one by one.
What I am expecting is to have PL/SQL statement which could help us in this regard.

Is there a way to open a new tab/window by clicking the Safari dock icon?

Is there a way to open a new tab or window by clicking the Safari dock icon? Right now, the default behavior seems to be that Safari simply un-minimizes or displays the last window in focus.
I want to be able to quickly fire up a new tab or window in Safari when it is out of focus, such as when Finder is in focus. The workaround right now is to right-click on the Safari dock icon, and select "New Window", or to allow the last window in focus to appear, and cmd+t or cmd+n. But this is too many steps over the course of a day for a highly frequented task like this.

I'm glad that helped. Thanks for posting back.
... when I save this as an application as "run only", it's relatively quick to run, but there's a delay to load... I assume it's opening Script Editor every time?
As long as the script is saved as an application -- Run Only or not -- it should definitely not cause the Script Editor to open. You can verify this by closing the Script Editor application altogether prior to clicking on the docked script icon that you saved. You should notice that the Script Editor does not open when the script is run.
FWIW, I went back and saved a version of the script as a Run Only app, and I didn't notice any difference between it and the original, which was saved without the Run Only option checked. The delay that you're noticing might be accounted for by the fact that the script, because it was saved as an application, will be activated just as any other standalone application would be. This happens prior to Safari being activated. Watch your menu bar when clicking on the docked script icon and you should see the name of the saved script app appear for a split second before Safari gets activated.
The only time I can think of that you might wish to save the script as a Run Only application would be if you wanted to conceal the script for some reason. If, for example you were publishing the script as a part of an application release and didn't want its contents known, or you didn't want an end user to be able to edit the script, you might select the Save As > Run Only option. To illustrate this, try dragging and dropping a script saved as a Run Only application onto the Script Editor's icon. You should see a warning dialog to this effect:
*Unable to read the file because the script is not editable (it was saved as run-only).*
Whereas if you drag a script that was not saved as a Run Only app onto the Script Editor's icon, the script should open in the Editor, and it can be edited.
I played around with the "stay open" option for saving the script as an application, but it appears I have to close the app and reopen it before I can get it to work a second time.
The Stay Open option is appropriate for scripts which use an "On Idle" handler, which really wouldn't apply in this case. Check out more on Idle Handlers here and here.
Is there a faster way to use this multiple times throughout the day?
One way you might speed up the action would be to save the script +as a script+ by choosing Save As > File Format: script from the Script Editor's File menu. The resulting script can then be activated by assigning a hot key to it using one of several 3rd-party keyboard shortcut programs available on the Internet. (I used Spark, assigned a function key to the script I posted earlier, and found the action to run significantly faster.)
Good luck.

Is there a way to create an intro splash page?

Is there a way to creat a intro splash page that people can click through to the home page? I need the actual homepage to stay as the index.html. Any solutions?

Hi James,
Please check this discussion and see if that helps you - html - how to force link from iframe to be opened in the parent window - Stack Overflow
If you need more clarification on this, please share your site's url so that I can see what's happening on your site.
- Abhishek Maurya

Is there a way to create a new section under "Library"?

iTunes lists several sections/divisions under the heading "Library" (Music, Movies, Books, Apps, etc), but I have a lot of audio (and a few video) recordings of speeches that I would like to put in a division of their own, preferably called "Talks". Is there a way of creating such a section/division? Better still is there any hope that iTunes would ever come with such a division? I can't believe that I'm the only one who collects interesting talks.
(Just to be sure that I'm being clear, I am NOT asking how to use an "alternate iTunes Library". I want a new section within the exisiting Library. BTW, I know how to use playlists, but I don't want talks mixed in with Music or audiobooks.)

Thanks turingtest2 for pointing out iTunes Feedback. I'm new here and I have not learned the ropes.
I've been pokin' around in Podcasts and iTunes U. It seems like those are good possibilities. Thanks again.
One thing I notice is that both sections sort on Newest vs Oldest which makes sense for such things. But I'd rather sort on titles. Ah, well, ya can't have everything. (Can you?)
Your smartsource sounds interesting. Good luck.

Is there a way to create a new folder in the Save As dialog box?

I could do this on my PC in Windows - I find it hard to believe there isn't a way to create a new folder when I'm saving a document? Perhaps I'm missing something...

Cool. BTW because you are recent switcher from the Windows world you may find these URL's useful.
Mac 101
Switch 101
Find Out How Video tutorials
List of Useful URLs for switchers

Is there any way to create backing bean, After page gets created?

Hi
Any one can please answer to my quick question !!!
Is there any way to create the backing bean ,after a jsf page gets created using ADF ..?
When i first time created the jsf jppx page i unchecked the option to generate backing bean, but later some time I would like to have backing bean for the newly created page. so is there any way to create backing bean ...?
Thanks in Advance

Have your page in the visual design mode then go to the Design->Page Properties menu and you'll be able to select auto-bind on the second tab.

Is There a Way to Have Multiple Photo-Album Pages?

... specifically by duplicating a current album page. I have an Album page with 13 albums on it, which makes for slow loading.
I was thinking of breaking it into 3 Album pages. The easiest way, it would seem, would be to duplicate the existing Album page twice and then deleting the Albums I didn't want on each page. But Duplicate is grayed out for the Album page. Is starting from scratch the only way to have a 2nd or 3rd album page?
It also doesn't seem to be possible to copy an album so it can pasted on a new Album page.

Just as Cyclosaurus pointed out if you drag a photos page from an existing album page onto the icon of a new, empty album page that photos page will be transferred/moved to the new album page and the captions will be maintained.
Give it a try and if it doesn't do what you expect just quit iWeb without saving any changes.
OT

Is there a way to create a new PDF from part of a form?

I would like to create a PDF form that is really several forms. A master form and several forms like Form A, Form B and Form C. The idea is to be able to fill out the Master form and have it populate the like fields in the other forms. What I would like to accomplish is to have buttons/scripts for each Form A, Form B and Form C that would output each one to a new PDF. If I wrap each form in a subform, is there a way I can output that subform to a new PDF? Or is there another approach I can take?
Maybe I could put all the forms in a package but somehow automatically populate the like fields in the other forms without exporting and importing data?
Thanks in Advance,
Ken

You are using LiveCycle Designer?
Acrobat Forms has has Personal Field Names, PFN, that can be used to import and export personal data since version 4. Samples are included on the distribution CD-Rom. forms\PFN

Is there any way to create a new library on iTunes?

I want to create a new library on my computer from the music on my iPod, but I can't figure it out! When I originally downloaded iTunes 10, it updated to a previous library. I can't get my playlists to update to my computer. AGH! Please help!

I think youre pasting it where the Red arrow is, highlight the Blue arrow one & paste there...
Doing so here results in No Name being changed to the Green arrow here, with all the same stuff in the Pane at the right...

Is there a way to create multiple New Tabs pages and name them?

Similar Messages

Maybe you are looking for