Is there a way to create user logins or some other way to ...

Is there a way to create user logins or some other grouping for a set of applications to use (memory) resources optimally -- for example only mail and Safari and Word in one grouping and another for Safari and an audio recording application, etc.?

It is possible to use Parenal Controls to limit which applications can be used be a particular user account.
But it's not really necessary as far as managing memory.
Matt

Similar Messages

Whats the best way to create USER variable in BI Apps?

I have just installled BI Apps and am trying to integrate EBS R12 with OBIEE 11g
We have USER variable already defined in the BI Apps rpd.
In EBS Security context init block i need to define USER variable, but when i define it... it says *'USER' has already been defined in the variable "Authentication"."USER"*
Whats the best way to create USER variable for EBS Security Context init block?
1) Delete the existing USER variable and then define a new one ( in this case all the places where USER variable is getting used in the rpd would become <missing>)
And i was told that it should not be done.
Let me know how can it be done.
Thanks
Ashish

Disable existing Init block and then double click on USER variable and hit on NEW... button to create new Init block
Thanks
Edited by: Srini VEERAVALLI on May 1, 2013 4:18 PM

What's the best way to create a login page in muse?

Hi.
Busy exploring muse I came across another problem:
What’s the best way to create a login page in muse?
I want to create 1 page on a site with access for people with login details only.
Sorry for beeing a newbie
Dutch greets
Toin Corten

Hi Toin,
Never need to apologize for being a newbie...we all were at one point or another.
I am going to move this question to the main Muse forum where you'll have a much better chance of getting a response. This particular forum is for questions around our Muse getting started project.
You may also want to check this thread out: http://forums.adobe.com/thread/1004543.
Thank you,
Ed Sullivan

HT204088 Why can't you print a cd jewel case listing of songs using iTunes. Is there some other way of doing this without using iTunes?

Why can't you print a cd jewel case listing of songs using iTunes. Is there some other way to do this without using iTunes?

Hi spider1950,
As long as you have the most recent update of iTunes (11.0.4), you should be able to print a jewel case insert directly from iTunes. You may find the following page useful:
Apple Support: Print CD Inserts
https://www.apple.com/findouthow/music/itunes.html#makecd-printinserts
Regards,
- Brenden

I have been unable to download the iphone software v5.1. I keep getting the timing out message. Is there someway to set my network connections to allow the download? Can I get the update some other way?

I have been unable to download the iphone software v5.1. I keep getting the timing out message. Is there someway to set my network connections to allow the download? Can I get the update some other way?

The Huntress is correct, I have missed that you have an iPhone 3G
Usually iTunes will tell you in that case, that iOS 4.2.1 the newest version for your phone.
If you don't have an iPhone 3G, network connections timing out can be a security software problem:
iTunes for Windows: Troubleshooting security software issues

My laptop has crashed and I can't sync my iPad air. I have tried to back up off I cloud but it hasn't transferred all of my photos or music. Is there anyway I can access my iTunes account any other way?

My laptop has crashed and I can't sync my iPad air. I have tried to back up off I cloud but it hasn't transferred all of my photos or music. Is there anyway I can access my iTunes account any other way?

Your iTunes account won't include your non-iTunes purchased e.g. music copied from CDs etc, nor photos that were synced from a computer.
To get non-iTunes music you will have to go via a computer. If you don't have that music on, for example, an external drive, then there are some programs listed half-way down this page which should be able to copy them back from a device : https://discussions.apple.com/docs/DOC-3991
For photos that were originally synced from a computer then there are apps such as Simple Transfer which can copy them between devices and/or to a computer (though photos are 'optimised' as part of the syncing process, so if you do copy them back to a computer then they might not be the same as they were on your laptop).
There is also this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141

Due to a very poor broadband signal downloads for my IPod touch are scheduled to take up to 9 hours! Is there some other way to get updates? from DRH

Due to poor broadband speed -less than 1/2 meg- updates for my IPod touch are scheduled to take up to 9 hours!. The system usually time out. Is there some other way to recieve update?

Try here:
iPod, iPhone and iPad Firmware Download
Near the top of the page it says how to select what you downloaded. Make sure you download the right update for your model iPod. They are different.

TtyS4 and ttyS5 how do I activate using 'setserial' or some other way

Is there a 'setserial' expert in the house?
I've got a daughter board/card that has a bunch of I/O on it. All devices work except the two serial ports. I have 4 serial ports on the main board plus these two on the daughter board for a total of 6 serial ports. The 4 ttyS* on the main board work but I can't get /dev/ttyS4 and /dev/ttyS5 to work. (these serial ports on this exact hardware work on Solaris 10 x86)
Here's what I've tried / found out so far:
Using 8250.nr_uarts=6" parameter to boot options in /boot/grub/grub.conf so once booted there is /dev/ttyS4 and /dev/tty5 (in addition to the standard ones).
Now I want to use "lspci -v" to find UART device info for ttyS4 and ttyS5 so I can use 'setserial' to specify port, interrupt and so on. This is where I run into trouble. I see from a block diagram from the manufacturer of the hardware that there are two Exar DUART chips: XR17D152 DUART for ttyS2 and ttyS3, and a XR16L2551 DUART for ttyS4 and ttyS5. Problem is, when I do a 'lspci -v' only the XR17D152 DUART for ttyS2 and ttyS3 shows up. 'lspci -v' does not report anything for the XR17D152 DUART, which is for ttyS4 and ttyS5. I look at a block diagram of the daughter board where the XR17D152 DUART is and see it is NOT on the main bus but under a PLX PCI9656 I/O accelerator chip. I do see the info for the PCI9656 chip when I 'lspci -v' but not the DUART that's attached to it. With nothing to lose, I tried using the 'lspci' info from the PCI965 I/O accelerator as parameters to setserial for ttyS4 and ttyS5, but of course that didn't get results. Furthermore I see when I 'dmesg | grep tty' that that serials ttyS2 and ttyS3 use MMIO, which I'm not sure that 'setserial' can specify MMIO, only port IO.
# lspci -v - output that shows the I/O acceler
04:05.0 Serial controller: Exar Corp. XR17C/D152 Dual PCI UART (rev 02) (prog-if 02 [16550])
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 80503000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: serial
02:01.0 Bridge: PLX Technology, Inc. Device 9601 (rev ba)
Subsystem: PLX Technology, Inc. Device 9656
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 7
Region 0: Memory at 80160000 (32-bit, non-prefetchable) [size=512]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at 80040000 (32-bit, non-prefetchable) [size=128K]
Region 3: Memory at 80060000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] CompactPCI hot-swap <?>
Capabilities: [4c] Vital Product Data
Unknown large resource type 35, will not decode more.
#dmesg | grep tty - this output shows that ttyS2 and ttyS3 use MMIO, there is no info for the XR16L2551, because it's not detected. I need to know how to tell the kernel about it.
[ 2.008167] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.033915] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.074052] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.100632] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.110283] 0000:04:05.0: ttyS2 at MMIO 0x80503000 (irq = 17) is a XR17D15X
[ 2.116775] 0000:04:05.0: ttyS3 at MMIO 0x80503200 (irq = 17) is a XR17D15X
Questions:
- XR16L2551 DUART (serial ttyS4 and ttyS5) is not detected by 'lspci -v' Can I find it some other way? Does it have a known MMIO? A way to probe for it’s MMIO?
- Can setserial specify MMIO for ttyS4 and ttyS5 once I find out what it is?
- Since the XR16L2551 resides under a PLX Technology PCI9656 chip which IS found by 'lspci -v' can I use memory info from it to probe for the XR16L2551, or can I even use the 'lspci' info from the PLX chip as parameters to 'setserial?
- How can I get these serials, ttyS4 and ttyS5 to work?
Last edited by Mogombus (2012-04-06 22:54:24)

lizziepaige wrote:
... having nothing but problems ...
See your other posts...
https://discussions.apple.com/message/20666642#20666642
https://discussions.apple.com/message/20666702#20666702

Ive tried almost EVERYTHING and i still cant track my iPod that was recently stolen. Ive called apple been all over the website and still no way of tracking it. What are some other ways!?

Ive tried almost EVERYTHING and i still cant track my iPod that was recently stolen. Ive called apple been all over the website and still no way of tracking it. What are some other ways!?

Only the old fashioned way, like if you lost a wallet or purse.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

I have misplaced my iPod Touch 4th Generation. According to Find my iPhone, it should show up in offline mode. I need help on locating it with a software or some other way. Help?

I have misplaced my iPod Touch 4th Generation. According to Find my iPhone, it should show up in offline mode. I need help on locating it with a software or some other way. Help?

There is no other way.
Sorry

How to lock the Properties bar to a toolbar or in some other way, make it permanently open?

How to lock the Properties bar to a toolbar or in some other way, make it permanently open?
Or can that checkbox 'keep tool selected' be made a permanent toolbar item?
I use the rubber stamp tool several times on multiple pages in certain pdfs and found that if I open the 'properties bar', I can select 'keep tool selected' and stamp away as much as I like without having to choose the stamp tool dropdown menu and select 'custom' each time I stamp. I appreciate the recent update that added a recently stamped stamps area and not having to click 'proceed' each time.

You can't lock the Properties Bar, but you also don't need to in order to make the Stamp tool remain selected.
Just right-click it in the Comment menu on the right and select "Keep Tool Selected".

Is there a way to bypass user login as its not being recognised

I have disabled automatic login and now I can't login as it does not like the username an or password, is there a way to bypass the user login, please help ASAP

http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

Is there a way to track user logins, or login metrics?

Hello -
We are using OID to provide SSO for an employee portal and we are about to bring another partner application online using the same OID server. We are looking for a way to determine how many people currently use the portal and subsequently will be looking for a way to track logins for the new app. Does OID keep this information in a table? Can I find this info in the IAS console anywhere?
Thanks in advance for any info.
Brian
EDIT: This thread provides some good info on this: OID user tracking
Edited by: bantonczak on Dec 1, 2010 9:09 AM

This thread contains good information on user logins with Oracle Portal and OID SSO
OID user tracking

Best way to create user interfaces

Hello Everyone,
So far my work with sap NetWeaver development was on the background processes but now i need to create some user interfaces, i read there are more than one way to do this like jsp, HTMLB , WebDynpro , and some others i think.
Can you give me some advises (and guides if it's possible) about what can i use?
The user interfaces must have the same look and feel as the SAP modules. I need to include some uploadcontrols, table views with sorting and paging features, buttons, list box, options buttons, check buttons, etc.
Also i need to send emails on demand and a task scheduler to send remaining by email.
Is there a user interface designer like dreamweaver or something like that to create user interfaces?
Hope you have some time to help me.
Regards.

Webdynpro java is best solution in userinterface devlopment
check the below links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40239f38-a94a-2b10-c583-9b89187c3856
Send Email in webdynpro for java
http://help.sap.com/saphelp_nw04/helpdata/en/91/9c2226df76f64fa7783dcaa4534395/frameset.htm
SDN RSS Feeds spider using WAS Timeout Service
webdynpro sample tutorials
Now it is located under the link https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/web%20dynpro%20sample%20applications%20and%20tutorials.htm.
Koti Reddy

What the best way to create User defined table with ADDON purpose

Hi folks, how are you ?
I´m beginner in development to business one, and I m studying to develop ISV addons.
But, during my exercises and analisys, I learned that have two ways to create tables and fields in business one. One way is throght by wizard in business one using Tools Menu > Configuration Tools > User Defined Tables >
Obs: I ´m using Business One Patch Level 9.
Other way, is create the tables and fields using DI API
But, my question is. When I develop one addon, or one UDO form that uses one set of user defined tables or used defined fields that where created by the first way (by wizard in B1), how I deploy this in other business one installation ? The package process will ensure the creation of this tables in another enviroment or I must implement the creation of user defined tables using DI API so that this code is called during the installation?
If in cases of addon develop I must use DI API to create user defined tables, How can I use my classes with this responsibility in package process ?
Thanks my friends.

Hi Renan,
You just need to put your logic in to the startup of your application, after you've established your connection to the UI API and DI API. All this will be triggered in the constructor of your main class.
namespace MyNamespace
public class MyAddon
bool runAddon = true;
bool initialised = false;
const string ADDON_NAME = "My Addon";
public static void Main()
        MyAddon addOn = new MyAddon();
        if(runAddon)
              System.Windows.Forms.Application.Run();
        else
         Application.Exit();
public MyAddon()
        // Connect to SBO session for UI
        if(!SetApplication()) runAddon = false;
private bool SetApplication()
        // Code goes in here to establish UI API and DI API connections
        // See SDK samples for examples
        // You should also define and filter the UI API events your addon will trap at this stage and create any menus
        // Call your routine to check if the required UDFs/UDTs exist on this company
        initialised = CheckInitialisation();
        if (!initialised)
           // AddOn not yet intialised on this company so prompt the user to run the intialisation process
          int iResponse = app.MessageBox("The " + ADDON_NAME + " addon will now create all required fields and tables."
                                         + System.Environment.NewLine + System.Environment.NewLine
                                         + "WARNING: It is strongly recommended that all other users are logged out of this company "
                                         + "before running this process. Are you sure you wish to continue?", 2, "Yes", "No", "");
          if (iResponse == 1) initialised = InitialiseAddOn(); // Call your routine to create the objects
        return true;
Kind Regards,
Owen

Is there a way to create user logins or some other way to ...

Similar Messages

Maybe you are looking for