Is there a way to customize categories in the pop-up menu on the Transactions page for Personal Budget without having to do it one by one?

I want to use the Personal Budget template but customize my own categories. I can change the categories on the Budget sheet and know how to add the new data to the graphs but I am having trouble on the Transactions sheet. I know when I click on a cell in the category section there is a drop down menu of catefories that I can edit in the data format option but do I have to do this for every cell? Is there a way to edit for all cells at once? Everytime I add a new cell its has the original categories and I would hate to have to format each one individually.

Set up one with the categories you want in the order you want.
Select the cell and press option-command-C to copy the format (style).
Select the cells you want to change and press option-command-V to paste the format (style) to those cells.
If all body cells in a column have the same style (in this case, 'same list'), added rows will adopt that style.
Regards,
Barry

Similar Messages

  • TS1398 I am using the wifi network at home but every time I connect I have to put my password to the network. Is there a way to identify this wifi network on my iPad and once it detects it joins directly without having to put my password?????

    I am using the wifi network at home but every time I connect I have to my wifi password. Is there a way to have my wifi network per-identified on my iPad and once it's detected the iPad connects to it without having to put my password again???

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Is there a way to customize scale quantize?

    Is there a way to customize scale quantize? In other words, is there a way I can create my own constraining scales?

    Yes..
    Create a new Project
    Go to the Project Settings screen via the menu option File: Project Settings : Tuning
    Select Fixed and then click on the dropdown menu as highlighted above
    Now you will see a long list that includes the following as examples...
    If the Hungariian Scale isn't included (I didn't see it specifically but it may be hidden away in the long list...
    Then you can click on the User option and create your own tuning scale....
    Cheers..
    Nigel

  • Is there a way to customize the web form link in Adobe FormsCentral?

    The dedicated link has a quite complicated address, not easily added to brochures to hand out.  Is there a way to customize the web form link in Adobe FormsCentral?

    It cannot be customized. The workaround is to create your own web page and embed our form into it. That way they only see your URL.
    Randy

  • Is there a way to open the right click menu on the left side of your pointer?

    Whenever I try to right-click an object that's located on the right side of the screen, the pointer always automatically click whatever entry in the right-click menu which just happens to be under the pointer the moment the menu is opened. I noticed that the reason this happens is because the right click menu always forces itself to open on the right side of the pointer, and when there isn't enough space, the right-click menu will open underneath the pointer. Since this is horribly inconvenient, is there a way to open the right-click menu on the left side of your pointer?

    Are you saying you have an icon on the far right side and when you rt click on it, your pointer ends up opening wherever it lands? That is a two step process, or normally should be at least a two step process. Do you have a Mouse in your Control Panel? You should check, because there may be some properties with which you can play. For instance, I can switch primary and secondary functions on my mouse buttons by checking a box.
    When I rt click on right side, the menu opens on the left.
    When I rt click on left side, the menu opens on the right.
    In order for me to take an action, I then have to move to an area in that menu and click.
    I hope I understood your question correctly.

  • I have 5 computers authorized on my account and I would like to deauthorize all of them. When I try it tells me I cannot do so until January 2016. Is there a way around this? I no longer have access to the computers that are authorized.

    I have 5 computers authorized on my account and I would like to deauthorize all of them. When I try it tells me I cannot do so until January 2016. Is there a way around this? I no longer have access to the computers that are authorized.

    Did you recently deauthorize a bunch of computers?  You can only deauthorize all once  year.
    iTunes Store: Authorize or deauthorize your Mac or PC - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050
    You will have to contact Apple and request they remove the lock on a reset.  iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

  • Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files?

    Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files? I just want to view / delete files without importing them.
    For instance I have 1200 photos on my iPhone Camera Roll. Some of these are shots, that I've taken multiple times, some good, some bad. I just want to clean up my Camera Roll, but going through the pictures on the iPhone's small screen is tedious. I'd much rather look at the camera roll's photo's on my Mac, and then decide which files I'd like to keep, and which to delete.
    I don't want to import the files, as when I import the files, and delete them from Camera Roll, now the Photo's are not on my phone, and the only way to get them back on my Phone is to Import them back in using iTunes, and then they go into the Picture Library and not the Camera Roll.
    In the same way as I can view Pics from my digital camera's SD card on a Mac without having to actually copy them to my computer, is there any app out there that will let me view my iPhone pics without importing them.

    gsharp01 wrote:
    Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files? I just want to view / delete files without importing them.
    The short answer is yes.
    Connect your iPhone to your computer.
    Open Image Capture application.
    Click on the 4 little squares at bottom to view them as photos, not a list.
    Select the photos them click the No Entry icon at bottom to delete.

  • Is there a way to create subfolders in my POP inbox?

    Is there a way to create subfolders in a POP Inbox in Mail? I am using Mail 2.1.1 (752.3).

    David Gimeno Gost wrote:
    The standard Inbox, Drafts, Sent, Trash and Junk mailboxes are all managed automatically by Mail. You cannot create your own mailboxes there.
    But you can create local (On My Mac) folders and then create rules to send emails to those local folders upon receipt. You can get as creative as you like with local folders.

  • Is there a way to create DVDs from movies made in iMovie on the iPad?

    Is there a way to create DVDs from movies made in iMovie on the iPad?  I have a PC.  Thanks

    King_Penguin wrote:
    There are third-party browser apps that have settings within them to identify themselves as full browsers e.g. Atomic Web, and I believe the iCab Mobile browser also does (I don't have it so i can't check)
    iCab indeed does allow for that

  • Is there a way to create a smart folder in iTunes, that contains the most recent (say 10) used playlists?

    Is there a way to create a smart folder in iTunes, that contains the most recent (say 10) used playlists? By having this I would be three clicks (touches from what is recent).
    Thanks

    100s with about 30 folders, comprised on different moods, years, genre, favorites, audiobooks, podcasts. Being accessed from multiple Macs and Apple TVs.

  • Is there a way of opening up old PSD documents and photos on the iMac please?

    Is there a way of opening up old PSD documents and photos on the iMac please?

    .psd (photoshop) files should open in preview to view them and make some simple adjustments. 
    If you want to edit them but don't want the expense of buying Photoshop (or Elements) for your Mac, consider downloading Gimp - it's free.
    http://www.gimp.org/downloads/

  • Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

    Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

    You need a third party app. Take a look at some of these on this Google page.
    Open zip files on iPad

  • Is there a way to import Raw files into LR catalog ..including..any edits performed in an external raw file editor such as Capture One?

    Is there a way to import Raw files into LR catalog ..including..any edits performed in an external raw file editor such as Capture One?
    I can import the Raw file successfully but cannot see any edits that were applied in Capture One. Im assuming no but just checking.

    Your assumption is correct, Capture One, Lightroom and other third party raw processors have their own proprietary processes and profiles for rendering the raw data.
    They do not make permanent changes to the raw data and store the changes to an .xmp file or to a catalog file like Lightroom.

  • In LabVIEW6i, is there a way to make particular elements of an array invisible while the others stay visible (without losing any element's info.)?

    I have an array of clusters. Each cluster pertains to a certain oscilloscope I am controlling. There is another control which specifies which oscilloscopes I have "on".
    If a particular oscilloscope is "on" I want its cluster to be VISIBLE in the array. If a particular oscilloscope is "off" I want its cluster to be INVISIBLE in the array.
    How can I implement this in my program without losing ANY of the info. in my array?

    I suggest to use two arrays; one for user interface holding the ON clusters,
    and one for internal use holding all clusters. The diagram periodically
    updates the internal array with user interface array data.
    By INVISIBLE do you mean "skipped from the array" or displayed as an empty
    placeholder? To hide an OFF cluster you could put in the cluster a flat
    button boolean that is small and transparent when ON and large enough to
    cover the whole cluster area (and other controls) when OFF.
    Jean-Pierre Drolet
    Scientech R&D
    "mcmastal" a écrit dans le message news:
    [email protected]..
    > In LabVIEW6i, is there a way to make particular elements of an array
    > invisible while the others stay visible (without losing any element's
    > info.)?
    >
    > I have an array of clusters. Each cluster pertains to a certain
    > oscilloscope I am controlling. There is another control which
    > specifies which oscilloscopes I have "on".
    > If a particular oscilloscope is "on" I want its cluster to be VISIBLE
    > in the array. If a particular oscilloscope is "off" I want its
    > cluster to be INVISIBLE in the array.
    > How can I implement this in my program without losing ANY of the
    > info. in my array?
    LabVIEW, C'est LabVIEW

  • Is there a way to delete an app when you can't see the app's icon?

    Is there a way to delete an app when you can't see the app's icon? I have so many apps that they don't all show up on the existing screens. I know it can be done by connecting to a computer and using iTunes, but I'm on the road away from my Mac.

    I tried that and instead of showing me the inaccessible screens, it just shortens the number of available screens. Then if I reset the home screen in preferences it removes the folders I created and I'm back to square one.

Maybe you are looking for