Is there a way to Default the Contractual User Type in Licence tab in SU01.

Hi Guys,
Is there any way to Default the Contractual User Type in Licence tab while creating users in SU01 to a specific value. Any help would be appreciated.
Thanks,
Naveen

Naveen, though you marked the question as answered, there is another alternative (needs change mgmt involved)-
1.Go to the field where you want the parameter ID to appear.
2.Go to the technical help for the field. In this case the Contractual User Type field.
3.Double click on the Screen data screen number (0112).
4.Click on the Element list tab and look for the screen field (from previous page). It is important that you find the entry with a type of I/0 not Text (US930-USERTYP).
5.When you find the entry click the special attributes tab. There are two columns on the right hand side GET Parameter and Parameter. The GET column needs to be selected for the parameter ID to be active.
6.Note if you change a field it is important to activate the change in addition to saving or the change will not take effect.
7.Probably you would like to make this change in the development system and move transport to other systems.
After this you have to set this parameter in your user master to the required value.

Similar Messages

Is there a way to default the monthly calendar display so that the current day always shows on top?

Is there a way to default the monthly calendar display
so that the current day always shows on top? ie, I want to always be able to see what's in the future 3-4 weeks, not what's in the past 3-4 weeks. The default monthly display is archaic--only allows you to see through the last day of the month. Suddenly today
is Oct. 30th, and I have a ton of projects lined up in November, but because I haven't been scrolling down every day, I haven't been aware of them every day. I realize there are other tools in Microsoft to help me stay on task, such as reminders and such,
but it would be helpful if I could always have the current day display on top of the monthly view so I can quickly scan what's coming up in the next few weeks.

Thank you!
Right, I already have it in Month view. My question is a little more specific--I'd like for the current day to always display at the top. For example, today is Oct. 31st, so the current day is at the bottom of the calendar since it is the last day of the month.
I can view everything in October that I've already completed. What I can't see are the future weeks because we haven't hit November yet. I'd like for the current day to always display at the top of my calendar so I can always see what's coming in the following
three - four weeks (whether they're a part of that month or not). I've been to other forums trying to find the answer, and have come across the same exact question from frustrated users--but there seemed to be no solution. So I'm posing the question myself
in this forum. Do you know if this is possible? What I found from other forums is that Outlook defaults to a physical 'desk' type calendar format--so just as I'd use a paper calendar at my desk, I wouldn't be able to see the following weeks unless I either
flip the page to that month or I come to the first day of the next month, thereby tearing the the old month off and now only able to see the current month. That format is just so...paper...and archaic! Essentially I want the calendars to loop so it doesn't
even really matter what month it is--I just always want to see what lies ahead without having to scroll down. With our being in the Technology Age, I'd assume this is a logical expectation, but we may be stuck with the replica version of the paper-desk-calendar
format until Outlook programmers add this Technology Age feature in newer versions.
See, this month kind of messed me up because I have so many projects for November that start tomorrow and next week, but I haven't seen them until this week. I would have been better quipped--at least expecting them--had I been able to see all of those projects
since last week or the week prior.
If there is no solution to this answer, would you know how I can contact Outlook to provide feedback? I'm guessing a newer version is on its way...
Thanks again in advance!

Is there any way to set the home page as an app tab?

Opening a new window with my homepage set as an app tab still generates a new homepage. Is there any way to set the home page as an app tab?

Hi,
Try File / Save As. Select "Page Source" from the Format pop up menu.
Carolyn

Is there a way to change the order that Ctrl+` switches through tab groups?

I prefer for Ctrl+Tab to switch between tabs in the most-recently used order (the same way Alt-Tab works), so I use that setting in about:config. Is there a way to do the same thing with the Ctrl+` shortcut that switches through tab groups? By default it appears to cycle through all of them, regardless of the order of use, which is very inconvenient for me, because I have tab groups that I don't use very frequently that just get in the way when cycling through them.
Barring that, is there a way to make it so that Ctrl-Tab cycles through all tabs, regardless of what group they're in?
I'd really appreciate any information. Thanks!

You're not alone in wanting this. Feel free to provide feedback to Apple directly:
http://www.apple.com/feedback/ipad.html

Is there a way to allow the end user to change the font color in a text field?

I didn't know LiveCycle existed yesterday so I have been using the Google a bunch.
I am building a request form and was asked if there was a way to change the color of font within a text field. (EXAMPLE: Original content is black. Notes are red)
I have 2 thoughts on this, one is to type it out and highlight then click a button to turn it red. The other way I am more partial to. Have a radial button that when off, types black. When on, types red. What is the best way to do this or is it even possible?

Figured it out. Change "plain text" to "rich text" and have user press ctr+e. Seems odd to me but it works.

Is there a way to default the setting to 140% zoom on every page?

I am new to firefox, used opera for years, I am trying to find a way for every page to be viewed at 140% zoomed view since I have poor vision. I know I can I can use crtl + to zoom, but I have to do that on each new page.

There are some add-ons that can be used to change the zoom level on all sites, for example:
* NoSquint - https://addons.mozilla.org/firefox/addon/nosquint
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level

Is there a way to identify the iTunes user?

Since the StoreKit API does not return subscription InApp purchases during a restoreCompletedTransactions call, only way to know for sure that someone purchased an app is to tie the initial purchase to the iTunes account in the server (developer server) and restore the active subscriptions on all devices that use that iTunes account.
Does the SDK provide for a call which will uniquely identify the user? Something like a UUID? The SDK provides for a unique device identifier but that is of no use to restore the subscriptions on the other devices the user may be using.
I do not understand why Apple did not think of this case when they decided not to support Subscription InApp purchases in the call to query for completed transactions. This is insane and short-sighted on part of Apple with no thought given to the developers needs.
-TRS

I have been working to create such a solution when Submit All first appeared, but that version was pretty buggy and I never got back to it. Maybe it is possible, but I cannot guarantee you that it can. When trying I have spent many hours to fix it without success. For the moment I don't have any incentive to restart with that problem. Hope you or some other user has more courage.

Is there a way to default scratch disks in system settings?

This might be elementary, but is there a way to default the scratch disks in system settings to match the project that you are currently working on?
What I mean is when I switch from project to project my auto save files get all jumbled up.. then when I really needed to retrieve one I had to search them out in folders from different projects.... it was a mess
So as I have it now.. I have to open a project then go to system settings and switch all my scratch disks accordingly.. but I always forget to do this not to mention that it is a pain in the *** and time consuming..
Thanks in advance if you can help

I just create one master file for all my FCP projects inside it there is the autosave folder, thumbnail and waveforme cache folders.. then inside each one FCP automatically creates a seperate folder with your projects name.. so you can find them easily

Set "Contractual User Type" when creating user in AS ABAP

Hello
For our productive landscape we use "mySAP ESS" user-types, see "Licence Data" in SU01 or table TUTYP.
In IdM 7.1 SP3 I have not seen any option for reading or setting these kind of values.
Is there any way to use this parameter in IdM? How?
Will it be implemented in future releases?
Regards
Michael

Hi Michael,
The connector supports this setting:
Just uppdate the configuration with these attributes, and valid values.
(This sample is from a toSAP-pass)
# UClassLicType                  %MX_LICENSEDATA_LIC_TYPE%
# UClassSpecVers                 %MX_LICENSEDATA_SPEC_VERS%
# UClassCountrySurcharge         %MX_LICENSEDATA_COUNTRY_SURCHARGE%
# UClassSubstituteFrom           %MX_LICENSEDATA_SUBSTITUTE_FROM%
# UClassSubstituteUntil          %MX_LICENSEDATA_SUBSTITUTE_UNTIL%
# UClassSysid                    %MX_LICENSEDATA_SYSID%
# UClassClient                   %MX_LICENSEDATA_CLIENT%
# UClassBnameChargeable          %MX_LICENSEDATA_BNAME_CHARGEABLE%
Best Regards,
Matt

Contractual User Type ID Data

Where is the "contractual user type id" field data stored in SAP. (found on the SU01-Display User transaction under the tab LicenceData)?
I need to retrieve and update the data for users.
Thanks.

If you are trying to find out data from USER name, then goto USR06 table, there you can find all the additional data
Kuntal

Is there any way to specify the default version of LabVIEW?

I have a sinking feeling that the answer to this question is "no." With more than one version installed, is there any way to set the default LabVIEW version for opening a VI? I have both 7.1 and 8 installed, and usually only use 8 to open an example or look at something posted here. When I do that, it resets all the OS hooks so that the default action for opening a VI is to open it in version 8. I've even gone so far as to create actions to open files in 7.1 and 8, but it always resets my default action.
I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
Ugh. I hate it when software thinks it knows what I want better than I do.

eaolson wrote:
I have a sinking
feeling that the answer to this question is "no." With more than
one version installed, is there any way to set the default LabVIEW
version for opening a VI? I have both 7.1 and 8 installed, and usually
only use 8 to open an example or look at something posted here.
When I do that, it resets all the OS hooks so that the default action
for opening a VI is to open it in version 8. I've even gone so
far as to create actions to open files in 7.1 and 8, but it always
resets my default action.
I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
Ugh. I hate it when software thinks it knows what I want better than I do.
Add
in the LabVIEW.ini file of those versions you do not want to rewrite
the registry on startup to point to themselves for VI files, the
following:
RegisterExtensions=False
Of course the VersionChooser utility mentioned earlier is even more convinient.
Rolf Kalbermatter
Message Edited by rolfk on 06-28-2006 08:21 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Is there any way to set the default for *.doc document so that Pages opens them automatically?

I have a number of Ms Word documents because I used to have Word for Mac before the last OS release. Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
Now Pages will open these files. Is there any way to change the default for *.doc files so that a double-click will open them in Pages?
(Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
Walt

2 iPhones in my house, both on the same Apple ID. Just got iPad mini, want to use iMessage with my phone number, but iPad only picks up other more recently added number (not mine) when I go to message settings. Is there a way to default to other number?

Hi guys, so we have 2 iPhones in my house, both on the same Apple ID so that my mum and I can share everything. I have just got an iPad mini, and would like to use iMessage on it with my phone number, but the iPad only picks up other more recently added number (not mine, my mums) when I go to message settings. Is there a way to make the iPad default to other number?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Troubleshooting Messages http://support.apple.com/kb/TS2755
 Cheers, Tom

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Apple Mail, is there a way to change the default time-out?

This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
Things I have tried:
I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
Any help would be appreciated.
Kraig

I already thought of that one. I deleted my account from there. But it didn't default to the other one. It just told me I needed to add an account. Thanks tho

Is there a way to Default the Contractual User Type in Licence tab in SU01.

Similar Messages

Maybe you are looking for