Is there a way to disable my premium sond (eq and adio enhancement?

is there a way to disable my premium sond (eq and adio enhancement? Mine is affecting the sound at all so i'm thinking something has been disabled or something as I know I have used it before and it worked

Hi,
Try using Recovery Manager to reinstall your original Audio Driver ( ie Conexant, IDT etc ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Is there a way to disable the auto play video and audio ads that are showing up on the web these days?

    A lot of sites have video ads that load and start playing while safari is loading the entire page - slows everythiing down. Also a couple news sites I go to have autoload/play content.  Is there a way to disable these auto loads?

    Install the ClickToFlash or ClickToPlugin Safari extension.

  • Is there a way to disable touch on the Helix and get a power management for battery cycles?

    As the title describes.
    I've been drawing a fair bit on the Helix using photoshop but what to find a way to disable touch. I used to be able to do it on my x220t through the control panel>isd tablet settings. Windows 8 doesn't have that option. Please don't mention palm rejection as it doesn't always work.
    Also I'd live to know if there is a battery gauge to show the battery cycle of the helix. I know the battery is in good condition. What i'd like to know is the cycles of both batteries.

    So I have found a temp work-around that does the deed.  I have been using a lot of autodesk sketch, and its bomb if you don't have to worry about your hand touching the screen while you sketch.  Here is how I have been doing it.
    WIN+X >> Device Manager >> Human Interface Devices >> 
    Under this section you will find three USB Drivers installed.  I found that if I desable the second USB Driver, then the touch screen stops working, but the Digitizer still works 100%.  Just re-enable when you want to use the touch again.  I really wish Lenovo had software to take care of this out of the box.  But as I said, It works for the time being.

  • Is there any way to disable the log-in process?

    i  have no need to re-enter my password to access my computer every time i restart, or after it falls asleep
    is there a way to disable the log-in screen and just go straight to my desktop?
    edit: i tried preferences  > security/privacy > de-select "require password"
    but i still get the log-in screen
    thanks

    Hi,
    take a look at:
    Preferences
    Users & Groups
    Login Options
    At the top you can (de-) activate the automatic login.
    Does it work for you?
    Greets

  • Is there a way to disable 'Save as' and 'Send Email' function in Acrobat XI?

    Hi,
    Is there a way to disable 'Save as' and 'Send Email' function in Acrobat XI?
    Thnx in advance.

    I would hope there would be no way to disable Save AS that would reduce the applicationss capability. What are you trying to prevent happening?

  • Is there a way to disable previously viewed iMessages from appearing as Messages notifications when waking my MacBook Pro from sleep?

    Is there a way to disable previously viewed iMessages from appearing as Messages notifications when waking my MacBook Pro from sleep?  Regardless of whether I am using iMessage from  my iPhone or iPad, when I open my MBP, I get attacked by Messages notifications for iMessages I've obviously already seen or responded to.  Is there a way to change this?  Are others having this issue?
    Additionally,  previous iMessages sent or received from those  devices sometimes don't populate into the Messages window on the MBP.  I haven't been able to identify when or what causes this; sometimes it just doesn't seem to work (and I verified that the messages sent/received were, in fact, iMessages and not SMS).
    Thanks - any help or insight would be appreciated!

    First you need to determine what laptop model you have; then we can help you. A Mac Book Pro cannot run OS 9.1.
    With your Mac booted up, click on the  at the far left of the menu. Then click on About This Mac. It will show what version of OS  you are running. What is the version?
    A MBP will be running something like version 10.x.
    If you are running version OS 9.x, you don't have a Mac Book Pro.
     Cheers, Tom

  • Is there any way to disable the objects owned by a user?

    Hai every body....My problem is..
    I had created 60 users granting them connect and resource privileges in oracle(8.1.5.0.0).All of the users are working under their logins(users)...Every thing is going fine...But now i wanted to disable the objects owned by those users
    (60 Users) for a period of 2 days,After that i wanted to enable them....Is there any way to disable the objects owned by them with out dropping the users?(The users should be able to work as prevoiusly on the new objects they will create after i disabled the objetcts owned by them previously)?

    hi
    if my understanding is right you want to disable the users for 2 days for any reason let say he is on holiday for 2 days then why dont u lock this user and submit the job for unlock after two days.
    Khurram Siddiqui
    [email protected]

  • Is there a way to disable push mail from Yahoo? It's draining my battery

    I'm on the prepaid plan and every 10-15 minutes my iphone turns on with a "The last transaction cost $0.00" message. I don't mind the message (although it is a bit annoying) but my problem is that this turns the LCD on for about 2 minutes at a time.
    I charged my battery to 100% last night, haven't used it at all today and after just turning it on a few minutes ago I had the "Your battery life is at 10%" message followed by a 5% remaining message a few minutes later.
    I've heard that it's the yahoo push mail service thats causing the phone to give the message (since it connects to the internet). My Yahoo account is my main one and I'd hate to have to login to yahoo's site each time to check it (the email functionality was a big selling point for me with the iphone). ATT/Apple don't seem to want to disable this message/"Feature", so I'm guessing I would need to step in and do something on my end.
    Is there any way to disable yahoo mail from "pushing" messages to my phone? I can hit the Check Mail button if I have to.

    Hi Everyone,
    To give an update on the situation: I disabled the Yahoo account and it seems to make a VERY NOTICEABLE difference in battery life - prior to this my battery would drain quite rapidly but since disabling it it's only lost about 15-20% over the past 24 hours (and thats with using the video/music/internet functions for about an hour and a half).. Prior to this it would have been close to drained under the same circumstances.
    Also, to confirm, the "Your last transaction cost 0.00" messages only appear when accessing the internet manually now. before they appeared every 10-15 minutes with no interaction from myself at all (while it was sitting idle, while watching videos, while charging, while in my pocket, etc..)
    I do have it set to only check Manually but Yahoo would seem to check on it's own even though this setting is checked (I'm guessing it has to do with the Push setting). Aside from draining the battery, it was quite annoying having 30 or so "Your transaction cost $0.00" messages to click through whenever I turned on the phone.
    I did have the screen set to shut off after 1 min, but the 'your transaction cost..' messages would first wake the iphone up, the screen would stay bright for about 30 seconds, dim for about 30 seconds, then turn on bright again for 1 minute until it shut off. I'm guessing the screen (being on for about 10-15 minutes per hour due to this) and the fact that yahoo accesses the internet on such a frequent basis are what cut the battery life down.
    I really wish I could make Yahoo work more like Gmail and have it manually search for new mail

  • The hotkey for Private Browsing ( CTRL Shift P ) interferes with another program I have running in the background. Is there a way to disable or change the Firefox Hotkey?

    Question:
    The hotkey for Private Browsing (<CTRL><Shift> <P>) interferes with another program I have running in the background. Is there a way to disable or change the Firefox Hotkey?

    You can try this extension:
    *Customizable Shortcuts: https://addons.mozilla.org/firefox/addon/customizable-shortcuts/

  • In keynote 2.0, is there a way to disable clicking to the next slide?

    I'm trying to create a Jeopardy template that lets the user click on the board to choose a question but I can't get it to stop moving forward one slide when someone click on the background of the question. Is there a way to disable that like in Powerpoint? I want to create clickable objects instead but if someone misses them by accident it could mess up the game.

    In the Document Inspector, in the Presentation dropdown menu, choose "Hyperlinks only". This option allows navigation of the presentation solely through explicit hyperlinks.

  • Satellite A500- Is there a way to disable Hyper-Threading technology (HTT)?

    Is there a way to disable Hyper-Threading technology (HTT)?
    It is really bothering me with some apps,..
    I cannot seem to find it in bios,..1.5,.. was it in earlier bios?,.. is there a way to roll back,..
    Is it even possible,..
    Message was edited by: rekof

    I know that, but why would toshiba lock it out in the bios 1.5 ,.. even Intel suggest disableing it,.. Its for future proofing,.. for now it does more harm than good,.. for some users atleast,..
    Hope we get this option in next bios,.. I would understand if it would be harmful for a product,.. but it is not,..

  • Is there a way to disable tab font smoothing (maybe with userchrome.css)?

    hello everyone I've just switched from chrome to ff and I'm very satisfied. Just one problem, is there a way to disable tab font smoothing (maybe with userchrome.css)? I've changed the colour of tab font (with userchrome.css) to white to improve readability but with white text is too bold. thanks !!

    hey thanks for the quick reply. here's a screenshot
    http://www.mediafire.com/view/?c2a2l69ci5zbq#bt6qrwr6ku8m5n6
    i think we just have to add some antialiasing in the userchrome.css? but i don't know the code.
    here's my modified userchrome.css
    /* Inactive Tab */
    tab:not([selected="true"]) {
    color:white !important;}
    /* Tab while loading */
    tab[busy] {
    color: blue !important;}
    tab .tab-text {
    font-size: 12px !important;
    /* tab font */
    tab .tab-text {
    font-family:Verdana !important;
    i read somewhere else the problem is more evident with white text on dark background
    thanks

  • Is there a way to disable usb sync?

    I have several corporate iphones that will contain sensitive data. We do not want the data on these units to be synced with unauthorized computers? Is there a way to disable usb hard wire sync?

    In iTunes go to Edit > Preferences > Advanced and select the option to prevent automatic syncing of iDevices when plugged in.

  • The status bar is blocking my content, is there a way to disable it via Javascript and the likes?

    I'm working on a site that requires a bottom footer in a fixed position, with a control button on the left hand side, my problem is, that the `new` status bar area covers this section for quite some time whilst it's requesting data, or waiting for the server, is there a way to disable it via JavaScript or some sort? It seems kind of silly for a status bar to cover your content (no offence), the old way was much nicer, sure it used more screen space, but atleast it didn't assume things. I just couldn't find a solution anywhere else, other than to move the button. :)

    You can use this extension to hide the pop-up that shows the URL of a link on hover and other data that previously appeared on the Status bar.
    *Status-4-Evar: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
    Add code to userChrome.css below the @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    *http://kb.mozillazine.org/Editing_configuration
    <br />
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #statusbar-display { display:none!important; }
    </nowiki></pre>

  • Question:-Is there any way to disable the installation location/folder of da Adobe AIR Application?

    Is there any way to disable the installation location/folder of the Adobe AIR Application or can we skip that part automatically?

    xmlns:mx="library://ns.adobe.com/flex/mx"  is the spark mx address, which is completely different than the original 2006 mx library. 
    The thing is:  I love AIR, hate spark, loved the 2006 pre-spark functionality.  It is so much more convenient and user friendly.  Given the choice between having the display seperate from the  processing, or having it be convenient and easy  to work with, I choose the later option.
    For the most part it seems like the AIR api is like a layer on top of the spark - flex system..   I would like to be able to over lay the same AIR functionality on top of the the old system....
    Possible or no?

Maybe you are looking for

  • Links don't work correctly in Adobe Reader 9

    We have a PDF document in Acrobat 10 that contains links to other PDF documents.  This main document is hosted on our intranet site.  The documents that it links to are located on a network share accessed with a drive map.  When the main document is

  • Spaces getting trimmed in file content conversion

    Hi all, I am converting a flat file to an XML file by XI. The problem which i am facing in file content conversion is that the spaces in flat file data are getting trimmed to one space in the XML in SXMB_MONI. The data in flat file is like SOUTHSEA a

  • BAPI for SAP HR (travel ticket request - TRIP)

    Hi all. I need to create a Travel Request with Travel Tickets from remote (using Tibco middleware). In other terms, I have to "expose" the TRIP transaction as a remote service. The standard BAPI_TRIP_CREATE_FROM_DATA is not sufficient because it allo

  • Integrating Multiple Web Analytic Tools Possible?

    Is it possible to integrate two web analytic tools in Eloqua? Google Analytics is currently integrated in our Eloqua instance and we would like to add Adobe Omniture. Does anyone know if this is possible and / or if this would have any negative impli

  • Can i mirror iphone4 with apple tv

    i have iphone4 can i mirror my phone by using apple tv airplay