Is there a way to display the actual time footage was shot?

I have two cameras I used for footage and they are not continuous so I need to find an easy way to quickly get the footage close to where they need to align. It would be great if there was a way to display that actual time of day in hours/minutes/seconds based on the cameras clock instead of just timecode, which doesn't give my much of a reference of the camera's time. Does anyone know of a way to display camera time?

There is a somewhat tedious workaround that will help (perhaps, since I don't know what your footage is).
Load in all the clips you plan to use in your edit. Select them one at a time and click File\Timecode and type in your "time of day" clock timecode and Set at Beginning. Click OK.
This will then change the Media Start from 00:00:00:00 for every clip to whatever you type in.
If anyone finds, or knows of, a way to do this automatically, I'd be very interested to hear about it!
HTH,

Similar Messages

  • My iPad was either stolen or lost and was in my luggage.  Is there a way to tell the last time it was turned on.  If so this will tell me if anyone has it.

    My iPad was either stolen or lost and was in my luggage.  Is there a way to tell the last time it was turned on.  If so this will tell me if anyone has it.

    If you have an iCloud account and Find My Device was enabled on the iPad, you could try to find it using the iCloud.com web site. Otherwise there is no way to find it.
    You need to change all your online passwords immediately; notify the airport at which it went missing from your luggage (assuming it was at an airport); notify the police; notify your insurance company so you can get reimbursed and buy a new one; move on.

  • Is there a way to get the actual XML string when using the JAXP SAX Parser?

    Hi All,
    I am using a JAXP SAX xml parser and am looking for a way to get the actual line of xml that is being parsed from within a content handler.
    Here's my scenario. Consider the following example xml document.
    <formCollection>
       <form name="myForm">
          <text/>
          <selection/>
       </form>
       <form name="anotherForm">
          <text/>
       </form>
    </formCollection>My hope is to validate the entire document and then insert an xml string containing each "form" element (and its sub-elements) into a map for later use. My thought was to create a String as each "form" element is being parsed (begining with the form's startElement event and concatenating until the form's endElement event is reached) and then inserting this string into the map. Is there a way to get the actual line of xml that is being parsed, rather than just the element name and attribute values?

    DrClap wrote:
    YouRang wrote:
    2. The first handler would validate the entire XML document, extract the "type" attribute from each <form> element, and place each <form> element and its sub-elements into the map of Strings, using the "type" attribute as the key. The second handler would take a <form> element and parse it into a Form object for the display. This option was the impetus for my question because it relies on the first handler being able to access the entire <form> element XML String and write it to a map.I don't see why you need the raw data from the XML document here. You should already be abstracting your data into Java classes in the first handler, instead of making the second handler do the parsing all over again.Correct, I am not referring to XForms. In this case, it happens that I am using the XML to generate an SWT ScrolledForm object and, thus, the XML element name happens to be named "form." However, the concept/design problem could apply to any type of object and the XML element could be appropriately renamed.
    My experience with XSLT is limited and I haven't done anything with it for several years. With that said, it seems that it is primarily used for generating web content, which wouldn't apply in this case because this is for a client-server application. I could be off base on this one -- if XSLT applies to much broader translations and would be more appropriate for generating Java objects than my current methodology, I could certainly look into it further.
    I apologize that option two didn't make more sense; it is difficult to explain. Yes, optimally the data should be abstracted into Java classes in the first handler. This is really an elaboration that I failed to specify when explaining option one. The problem is that the user can choose to create any number of "forms" of any type. For instance, let's say that from the File -> New menu there are options for seven different types of forms and each form is used to send completely different data. The user can select form1, select form1 again, select form4, and select form7 (or any other combination) and bring up tabs that display the different forms. The user can then enter data and submit each form separately. When the user selects File -> New -> FormX, a SWT ScrolledForm object that corresponds with FormX must be given to the display. Because SWT ScrolledForm objects do not allow a deep copy, I cannot simply read the XML <form> elements at initialization, parse them into ScrolledForm objects, and pass deep copies of the ScrolledForm objects to the display each time the user clicks File -> New -> FormX. The only simple way I see of getting a new copy of a ScrolledForm object is to reparse the appropriate XML <form> element in order to create one each time the user selects File -> New -> FormX. As such, one handler would need to read the entire XML document and parse the <form> elements into a map (or some other data structure) and another handler would need to parse individual <form> elements into SWT ScrolledForm objects. The first handler would be called at initialization and the second handler would be called each time a user clicked on File -> New -> FormX. Once again, this isn't exactly my favorite implementation... but seems the simplest given that there is no way to do a deep copy of an SWT ScrolledForm object. Hopefully that makes a little more sense. No worries if it doesn't -- I just figured I'd throw this out there and see if anyone had a better idea.

  • Is there a way to display the date and time on my officejet 6500

    HP Officejet 6500a Plus Windows XP_ Is there a way to display the date and time on the display of my printer

    Are you referring to the Date and Time some cameras put right on the image?  If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
    Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
    If your asking about some other date post back.
    regards

  • Is there a way of displaying  the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top?

    Is there a way of displaying  the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top? I know this can be done when they are displayed as a list, but I want icons!

    Hi geezer,
    when you open your 'Downloads' folder choose 'View'  in the Menu bar and choose:
    'as List'
    'Show View Options'
    In 'View options' window you tick:
    'Always open in list view'
    'Date Modified', or
    'Date created'
    Now inside the 'Downloads' folder click on 'Date Created' (or 'Date Modified')
    column to get items alined from oldest to newest date (or reverse)…

  • Is there a way to display the coordinates(x,y)  of the objects automatically ?

    hi and happy new year
    is there a way to display the coordinates(x,y)  of the objects automatically (may be on a label over the object ) and print them?
    i mean i want to design a game level (in pixels) place the object on the map ang get the locations automatically to print them
    thank you
    txarly

    Good day!
    Which version of Photoshop do you use?
    If you have CS6 Etended the Measurement Log might provide some options to store and print the information separately, but if I interpret your wuestion correctly (for example that by »object« you mean »Layer«) I think a Scripting approach would be best.
    Scripts can be used to automate tasks with more options regarding conditionality than Actions by using JavaScript-, VB- or ApplaScript-code to control Photoshop.
    If you want to pursue that option you could ask for help over at
    http://forums.adobe.com/community/photoshop/photoshop_scripting
    or
    http://ps-scripts.com/bb/
    But please post screenshots/mock-ups right away to illustrate what you start with and what result you want.
    Regards,
    Pfaffenbichler

  • Is there a way to display the song timing/duration?

    I have a new 6th generation iPod Nano. Is there a way to display the song timing? Sometimes I want to fast forward to right at the end. I guess I miss the click wheel when I could zoom right to the end without just holding down the arrow and guessing about when I'd get there. Is there a way to access this function on the new nanos?

    You're welcome. You can find the manual for the 6th Generation Nano here: http://manuals.info.apple.com/enUS/iPod_nano_6thgen_UserGuide.pdf

  • Apple Mail, is there a way to change the default time-out?

    This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
    I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
    Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
    I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
    Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
    Things I have tried:
    I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
    I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
    Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
    Any help would be appreciated.
    Kraig

    I already thought of that one.  I deleted my account from there.  But it didn't default to the other one.  It just told me I needed to add an account.  Thanks tho

  • Is there a way to change the download time (hour-minutes) for podcasts?, Is there a way to change the download time (hour-minutes) for podcasts?

    Is there a way to change the specific time when subscriptions to podcasts are downloaded?  I seem to be locked in to 6:29 pm.
    Thanks. 

    i have the same problem. i bought a new external hard drive and i am trying to move my entire library onto it. i copied all of my itunes library onto it but when i tried to delete a song off of my initial C: drive to test it, i had to go in an individually change where the songs location was. i already tried changing where the itunes music folder was located however the library still says its located on the C: drive.

  • Evaluation of SQL Server 2012 R2 expired is there any way to extended the evaluation time?

    Hello,
    My Evaluation of SQL Server 2012 R2 expired is there any way to extended the evaluation time?
    Please let me know,
    Thank You! and Happy New Year

    Hello,
    Try to roll back the time of the computer to a few days back until you are able to perform an edition upgrade.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Is there any way to extend the spin time?

    I'm retrieving heaps of old jobs from archived CDs and DVDs and what's becoming apparent is the time the CD/DVD is spinning. I can understand saving energy etc, but it's not very long at all, which means I've been spending about 3 or 4 seconds per job, waiting for the disc to spin up. Times that over the hundred+ jobs I've got, and it'll add up.. Is there any way to extend the spin time to something more like 30 seconds, or something else?

    Hello Kit,
    The only thing you could try is to deselect the "spin down hard disk's when possible" option in the energy saver System Pref's. I doubt this will provide much success, but its worth a shot.
    Cheers
    Bryza_Bone

  • Is there a way to display the legend for a chart, but not the chart?

    Hi,
    I have a stacked column chart and a line chart on top of each other.   I can't use the legend for the stacked column chart because the data will change from month to month, and the 2 charts will not be aligned.  I copied the stacked column chart to another part of the canvas and want to display only the legend, but the chart is still displaying.  Is there a way to prevent the chart from displaying?    Thanks.

    hi Jim Wojewnik,
    we can show only the legend in a pie chart by dragging the edges to closer.do the following,
    select the pie chart,select the edge of the chart and make it small and u ll find the pie chart shrinking.make it lean such that the pie chart disappear.
    try this work around and let me know.
    regards,
    ravi.

  • Is there a way to display the time-code of all tracks?

    I bumped some audio out of sync.  Is there a way to display all my audio and video time-codes simultaneously, so that I can see if my tracks are out of sync, and by how much?

    You could link video and audio tracks in the timeline
    that you want to stay in sync with each other.
    Link or unlink video and audio
    Once video and audio clips are linked in the timeline, you can
    view the offset in frames if you happen to accidentally slip the sync.
    There are a couple of automatic methods for recovering lost sync in
    linked clips.
    Automatically synchronize clips that were moved out of sync

  • My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

    My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

    Hi Gazpan,
    Thanks for visiting Apple Support Communities.
    I recommend using the steps in this article to back up your iPhone if possible:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    You may also find this advice helpful for your situation:
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5661
    If you no longer have your iOS device
    If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
    If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
    Cheers,
    Jeremy

  • Is there a way to see the last time my ipad was online?

    I lost my ipad and I can't use the locate my iphone app because the ipad is offline.  I am wondering if there is a way to see when the last time it was connected to the internet and where it was the last time it was connected. 

    No.  Find My iPad doesn't keep any history of that.  Also, it it's a wifi-only model, it will only be online if it is connected to a known wifi network.  The best strategy is to put it in lost mode and change your iCloud password so someone can't take over your account.
    You might also want to read this: http://support.apple.com/kb/HT5668.

Maybe you are looking for