Is there a way to do a body double in FCP x?

I am trying to go into one clip where there is an
Action scene, and put my headshot on the stunt
Man. I want to miake it look like me doing the stunt. Basically
my head on another body in motion.

It is almost impossible to do this without a tremendous amount of skill, time and effort.
So forget about any quick fix or magic filter.
You could video your head against a green screen attempting to mimic the movements of the stuntman.
Your head could then be superimposed and your body masked out but a great amount of keyframing would be necessary and the result would probably be unconvincing.

Similar Messages

Is there a way to create a custom overlay within FCP?

Simple question...
Can u create a simple overlay (such as a square box) within FCP and have it work as an overlay, with alpha channel. Can't seem to figure it out.
I've done it by making the object and then keying out the black, but is there a way to just make it and have it work right off the bat?
Thanks!
mm

Interesting question. I had to go try it and, you're right, the shapes come in on an opaque field and I have always assumed they were on transparent. Seems they were in earlier versions, can't remember. I do most of that kind of work in Motion.
You can use the luma keyer or you can shift one or more of the color channels to the alpha.
You can use the Screen composite mode which makes black transparent but there are issues with modes if you start stacking layers.
bogiesan

Is there any way to change literals from double to single quotes?

I'm converting a small application in C# / .net that runs on several other databases to HANA.
The escaped double quote thing is pretty painful - is there any way to change the default literals from double to single quote on the connection or though the driver or otherwise?
Thanks -- Chad

Hi Chad
can you please provide an example of what runs with other DBMS but doesn't with SAP HANA?
- Lars

Is there any way to randomize ints or doubles?

I'm not sure if this is possible but let's say I decide to choose 5 numbers. (e.g. 1, 2, 3, 4, 5) Is there any way to change these numbers and make them random numbers? I know this might sound strange but I'm thinking about making a program: A online lottery service, where the numbers are randomized every time a lottery is held. I hope some one here gets what I'm saying. If there's a way, can someone tell me thx!

import java.util.Random;
Random r = new Random();
int i = r.getInt(--size--);
http://java.sun.com/j2se/1.4.2/docs/api/java/util/Random.html

FCP & 3D. Is there a way to stream two tracks out of FCP simultaneously?

Has anyone set up FCP to cut 3D? Is there any video card or existing 3rd party 'plug-in' or 'hardware device' that might facilitate taking two images simultaneously out of FCP?
This is for a 3D IMAX film company now using a very awkward proprietary system - which requires several different format renderings, working only SD etc. etc. A mess. I've proposed they create an 'Apple' pipeline, which makes perfect sense right up to being able to do screenings in 3D.
If there is a way they could screen their edits in 3D they would be on board tomorrow.
To go back to the IMAX footage and final post production they'll use an EDL or keycode, so outputting the final edit for IMAX is not part of the problem.
Any suggestions would be most appreciated...
Ben

my suggestion is to read this thread, which does not hold real solutions, but is still running and holds some hints:
[Stereocopic FCP?|http://discussions.apple.com/thread.jspa?threadID=2192392&tstart=50]
Rienk

Is there a way in iTunes 11 to double click on an album and have the track list show up the way it used to in iTunes 10.7?

I'm talking about Album view where album covers are shown where you used to be able to double click and have it show up in a list view, but now in iTunes 11 there's just a window that pops up with the track list in front of other albums. Any way to get it back to the way it was in iTunes 10.7 where you double clicked on an album and it went into a list view?

Turning your Mac into a clock radio.
1. In iTunes create a playlist that contains just the radio station you want to wake up to.
2. Export the playlist (as .m3u works well). Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
3. In iCal create an event entry at the time you want to wake up.
4. Right (or Control) click on your wakeup event and select Get Info.
5. For "alarm" select Open File.
6. Now under Open File there will be a place to add the file to open. It will probably be some default entry (like iCal). Click on it will allow you to select "other." Then use the file dialog to select your playlist file.
Your Mac will wake you up at the appointed time. You don't need to keep iCal running. If you want to put you Mac to sleep for the night then there is one more thing you need to do. Open System Preferences to Energy Saver and click on the Schedule button. Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
Dan

Is there a way i can delete triples of a photo with out doing it all day

hello my son transfered all my pics to external HD I transfered them back to my mac into Iphoto & when I looked omg all my pics have doubles or triples is there some way I can delete the doubles & triples with out being here all day doing it by hand like a button says delete all doubles & triples HELP PLEASE

Delete the mail account from the iPod and reenter the settings.

I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is there a way to record at the same time analog and digital channels?If,ye

s can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition stops by a trigger?.I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is there a way to record at the same time analog and digital channels?If,yes can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition
stops by a trigger?.
Thank you for your interest in advance

s can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition stops by a trigger?.PALE wrote:
>
> I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is
> there a way to record at the same time analog and digital
> channels?If,yes can I have timestamps for each sample?I mean,is there
> a notion of time information on this board?Finally,is there a way to
> know ,in the double buffer's case,the number of samples in the
> halfbuffer which is not full if the acquisition stops by a trigger?.
Start by looking around the examples that ship with LabVIEW (if you are
using LabVIEW).
Also look around zone.ni.com for general data acquisition information &
examples. A good site.
Mark

Is there a way to avoid a iPlanet Messaging Express home user to copy from the email message ( email content ) body and paste on to a local place( it Hard disk, for an ex )?

Is there a way to avoid a iPlanet Messaging Express home user to copy and paste email body content and avoid attachment deliver attempts?Cause this could grant home users to take ownership of enterprise's documents, sending to them selves and after that, in their own homes, they access Messaging Express, recieve their email with the forbbiden content and then copy and paste to it's own's hard disk.

It may be possible, but then what would prevent the user from running a "screen grabber" to capture the data. The underlying question that you need to ask is, "Who can you trust?" If you're concerned about confidential documents being stolen/disclosed, then that is where your security starts. If someone can't access a document, they can't E-mail it or transport it elsewhere. Who says they can only use E-mail? Using ftp is more efficient, or a floppy/Zip/Jazz drive could also be used. Trying to "secure" the E-mail client would be like plugging a single hole in a water pipe full of leaks. You have to shut off the water at the source.

SmartForms - Is there a way to put PDF attachment in the body of Email?

Hello All,
Currently I have a Smart Form that generates an MAIL with a PDF attachment. It works very nicely with from, to, and subject information correct. A new request from the users is to show in the PDF output in the email vs. an attachment. They mention that not all consumers open the PDF attachment.
Is there a way I can write the form in the email that would look exactly like the attached PDF format?
Or is there a way I can leave the PDF attachement with text in the email like 'Open the attachment to view the items that have been shipped in your recent order'.
Currently I'm using CALL FUNCTION lf_fm_name with control parameters, mail_appl_obj, mail_recipient, mail_sender, and output options.
I would greatly appreciate help in solving this ASAP. Thanks!

Vijaya,
thank you for you quick response.
i have followed your example logic and i now see a brief message in the body of the email. Which i part of my requirement but i'm unable to open the PDF doument.
i'm getting the error message "Abobe reader could not open 'test.PDF' because it is either not a supported file type or because the file has been damaged"
Any idea why? Before adding your logic after calling the smarform to use 'CONVERT_OTF' and 'SO_NEW_DOCUMENT_ATT_SEND_API1' the attached PDF file was perfect.
below is the the call function for my SF. after this call i have added the logic your suggested.
call smartform
      CALL FUNCTION lf_fm_name
           EXPORTING
                     control_parameters       = control_parameters
                     mail_appl_obj            = appl_object_id
                     mail_recipient           = recipient_id
                     mail_sender              = sender_id
                     output_options           = ls_composer_param
                     user_settings            = 'X' "ADDED THIS SETTING
> SmartForm specific fields
                      gi_salesord_num      = gi_salesord_num
                      gi_goods_mvmnt_date = gi_goods_mvmnt_date
                      gi_tracking_number   = gi_tracking_number
                      gi_carrier_name      = gi_carrier_name
                      gi_email_to          = gi_email_to
                      gi_coupon            = gi_coupon
                      gi_url_name          = gi_url_name
           IMPORTING
             job_output_info               = job_output_info "w_return    "ADDED IMPORTING AS TABLE
           TABLES     git_item_tab         = git_item_tab
<
           EXCEPTIONS formatting_error     = 1
                      internal_error       = 2
                      send_error           = 3
                      user_canceled        = 4
                      OTHERS               = 5.
in bebug mode if i look at the retuned table in debug i see values like below:
    1     //        |XPDF1        0640 00000000001                                <
    2     IN        |04EYZSF_SD_WKI_EMAIL_CONF                                      <
    3     IN        |05FIRST                                                        <
    4     OP        |LETTER P 144 240 1581712189000010000100001                   <
    5     IN        |06WK_BRANDS_COLOR_LOGO                                         <
    6     MT        |0210001134                                                     <
<< Unformatable text removed >>>
it looks like there is an issue with the convert or i've got some logic wrong. Any ideas?
Edited by: Rob Burbank on May 7, 2009 2:55 PM

When I forward an email from my Mac Mail, the body of the email I just forwarded shows as an attachment in the recipients outlook. Is there a way to change this so my clients don't have to open an attachment to read something that I forwarded to them?

When I forward an email from my Mac Mail, the body of the email I just forwarded shows as an attachment in the recipients outlook. Is there a way to change this so my clients don't have to open an attachment to read something that I forwarded to them?

Open Terminal in Utilties and copy/paste
This will send the attachment embedded inline. (This works in Snow Leopard, but not sure about Lion. Do a test first. If it doesn't work, just google "send attachment embedded + Lion." You don't actually have to send the message to see how it will appear.)
defaults write com.apple.mail DisableInlineAttachmentViewing 0
To reverse the setting, change the 0 to a 1
However, whether this will work or not will depend on what the e-mail client on the receiver's end does with it.

RE: Is there a way to have 2 network cards on the samemachine

Sean,
I mean I am always connecting to the nodemgr of the 2nd environment
successfully. Only when I run the client part of the application that I know
is up, I get a response from the Name Server that it is actually the first
IP address.
I checked again. I defenitely have FORTE_NS_ADDRESS set to IP:5004, in my
case, and not the hostname. I don't have FORTE_LOCATIONS set any where. the
NS_ADDRESS for env2 has only 1 IP address associated with it. My Forte
Control Panel on the client, and hence the NS address has only one entry.
I tried going into escript like you said, and the name service still thinks
it is IP1.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 1:31 PM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env
1?
If the first scenario is the case and you are connecting to the nodemgr
for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name
it
will register using the IP for the primary network card associated with
the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to
get
anything other than the primary card.
I would also suggest that you do the following. After everything is up
and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it
is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to
be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will
use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forteis
doing a host lookup if you are providing a name for examplemachine1:5000.
You can bypass the host lookup by using the actual ip dot addressinstead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even thoughmy
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in theenvironment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the
first
address in the list and if it succeeds, there is no reason to move onto
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it
retries
the
first entry again. I know that Forte knows about this but I do nothave
a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail
over
on
the same machine, or use one card to advertise outside your firewalland
one
to use inside, then you will have to contact Forte to determine whenthe
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both
cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on bothcards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the samemachine
Sean,
Thanks for your reply. I tried the approach. I was not very specificin
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cardsand
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses
for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds
with
a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the
same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you
set
the
FORTE_NS_ADDRESS to contain multiple entries before starting the
name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multipleip:port
combinations.
We were doing something very similar with another customer I was at
to
get
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have
2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port
on
the
first network card. We don't want to turn IP forwarding between
the
two
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do, the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses are known
to
the client that is trying to contact the partition it will always use the
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with the client
failover to the secondary address in FORTE_LOCATIONS. If the first entry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not have a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to load balance
across the network cards you could have the environment manager listen on
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, following your
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected on the
second card to talk to one of the partitions. The node mgr responds with a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However, from
reading your note, it appears that all you need is for the name serviceto
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the same machine
Venkat,
Technically yes this is possible, though not in Forte. A name server
can
only listen on one port.
To implement this scheme you will have to write a proxy service (in some
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the real nameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2ip
addresses, and the connection between the two is the unix box and onlythe
unix box. I have a pc connected to the 2nd network card and I want it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href="http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Is there any way to repeat the last action on a new selection?

I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

Is there a way to create an if statement in dreamweaver?

I am currently building a website that sells industrial seating. There is a seat called SP006 that appears both in section, "small suspension seats" and "construction". So far I have been resaving the same page twice but renaming it "sp006_construction.html".
Everything stays the same except the back button changes links, one goes to small suspension seats, the other goes to construction. Is there a way to create an if statement so that I don't have to keep resaving the same file over and over again?
Thanks.
Chantalle

Upon reading your question again, I think that I initially got the wrong impression.
As I see it now, you want the same contents to go to two different documents, but want to maintain only one copy.
Making use of SSi's will solve that problem, i.e. you will still have two documents, but they will have the contents from a file called sp006.htm. The document will look like
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>Small Suspension Seats - sp006</title>
</head>
<body>

</body>
</html>
The same will go for the construction seats. This way you will have one file to maintain, but it is used in two different documents.
Gramps
PS You may have to rename the file with an extension of .shtml or similar. Have a look here for more info http://en.wikipedia.org/wiki/Server_Side_Includes
Message was edited by: altruistic gramps

Is there a way to change the message received in Outlook from Mavericks calender?

Hi there
I found a post discussing this whereby a user was advised to edit the ITIP.stings file in the contents of the iCal.app to change the standard message that states "To accept or decline this invitation, click the link below" etc message that an Outlook user received when getting a calender invite from Mavericks Calender.
The post is here:
Is there a way to change the standard email message?
Problem is, on Mavericks it does not have that string in that file - I've actually checked ALL the .strings files in that folder but to no avail. Did it move somewhere else on Mavericks?
On another note...this whole process is part in part moving from Entourage to Mac Mail and Calender due to Apple's (illogical) removal of the ability to sync with anything other than iCal / Mail / iCloud. So we manually moved everything across (thousands of mails and hundreds of folders) and hundreds and hundreds of calender events.
Now it syncing but herewith the problem...if I create an event and send it to someone, they receive it as the iCloud account email and not our work email (pop account with our own domain). Even then when I open it in Outlook, it has some horribly malformed address and when you accept, you get a delivery failure.
So we create a different Calender (On the Mac) and this sends 100% (except for the message in the body we'd like to change) but this does not sync with the Iphone or the iPad. Then we have to manually change the calender event to the iCloud calender and it brings up a message that its going to send the update to all the attendees...and you must choose between send via mail or send via server.
What do I do!?

Anyone? Just need to know where I can change that message and also how I can set up the icloud calender to send invites using my work email address (as configured in Mail)?

Is there a way to do a body double in FCP x?

Similar Messages

Maybe you are looking for