Is there a way to do the Alpha Inverted tool on more than 1 layer?

I'm trying to make a object appear behind me and need to have 3 layers done like that.
Or is there a way to take one layer and cut the time line into parts instead of just editing it? Like having one layers time line cut into 3 different parts?

Cut the layer's timeline into 3 different parts.
Use: EDIT - SPLIT LAYER
You may want to be familiar with expressions, parenting, or have the timing for the animation locked before you do this.

Similar Messages

Is there a way of aligning the images in iweb photoalbums other than have them be a square?I have them at same height and resolution but htere is a default that shrinks them and aligns them at the bottom.Thanks.

Is there a way of aligning the images in iweb photoalbums other than have them be a square?I have them at same height and resolution but htere is a default that shrinks them and aligns them at the bottom.Thanks.

So how did you do it?
by understand what iweb widgets do, in this case setting gridEntry widget's scalMode preference from fill to fit.
then reset the displayed image, so it fits in the display area even if it's portrait aspect.
however, i found some glitches in gridEntry widget that's quite strange... but all fix-able.
perhaps, iweb experts (whose had poked at my example) here can chime in.

HT4437 is there a way to connect my ipad with airplay to more than one airplay enabled speaker? at the moment it allows me to connect to only one?

is there a way to connect my ipad using airplay to more than one airplay enabled speaker? when i tap the airplay icon on my ipad i see the list of all the speakers in each room but i can only connect to one at a time. Itunes, on my laptop, allows me to connec to all of them at the same time but Music on my ipad allows me to choose only one speaker at a time. Can several be connected at the same time using Music on Ipad or iphone?

That's great, but not what we want to do. I've been looking at all the boards for a solution to this and, you are correct. There isn't one - at least not one native to iOS. What I think EricB2 would like, as well as many of us, is the ability to take any audio stream (pandora, tune-in radio, etc.) and stream directly to multiple airplay devices from our iPads and iPhones without having to use the computer. Just walk into the house from the car, hit a button on the iDevice and start listening to the same stream we were listening to in the car on all of our home speakers. I know, this is like science fiction. My own opinion is that it would cut into Apples lucrative iTunes business model and really isn't in their best interest, so I don't think it will be happening anytime soon. Bottom line is if you want to use your Apple devices for whole house streaming, you need a computer and music from iTunes($$). Otherwise it's $$ out of Apples pocket.

Is there a way of changing the alpha value of a symbol in its own timeline without ActionScript

I'm trying to make an animated banner ad where radio waves emanate from a device as they fade in and fade out.
I got it working, then realized I'd like the radio wave animation to loop repeatedly while the text in the ad comes in and out, so I thought maybe it should be a symbol and have the animation take place in its own timeline.
Problem is, when I make the symbol and double click to enter its timeline, the color effect menu disappears.
I don't feel comfortable in ActionScript yet. Is there no other way to do what I want?
Can I create the radio waves as a separate animation file, then import it into the main animation?

You should be able to make seperate keyframes and then modify the alpha of any MovieClip or Graphic objects within that keyframe. After that right click somewhere between the keyframes on the timeline and select "Create Classic Tween".
NOTE: You have to have the keyframe selected on the timeline to be able to modify properties. So if you have a keyframe on frame 1, frame 10 and frame 20 set the alpha on frame 1 at 100%, frame 10 at 0% and frame 20 at 100% and it will fill in the blanks.
EDIT:
If the objects in your inner symbol are not a MovieClip or Graphic select all and then Right Click and select "Convert to Symbol" to make them one.

Is there a way to use the find/replace tool to select the actual step in the TestStand sequence instead of just listing matching values in the find window?

The purpose of this is to be able to select many steps that are scattered throughout a sequence so I can change the step type one time. I could do this now, but it would take me 30 minutes to click through the sequence and select all of the steps before I'd even change the step type because there are different steps inbetween the ones I want to select. I wouldn't be able to just use the shift key to select multiple steps because of that. I have about 500 steps I need to select, so it would be worth it to find an automated way to do that.
Unless there's a way to change a step type from a numericlimittest to an action step type from the find/replace window???

I ended up using ActiveX calls in TestStand to find the steps I wanted and change the step type to Action. See attached example sequence.
Attachments:
Convert NumericLimitTest to Action step type example.seq ‏9 KB

Is there any way to make the compass heading in Maps more accurate?

I find myself perpetually annoyed by the inaccuracy of the iPhone 5 compass when I'm using Maps. Here are my main issues:
1) When I am at rest (perhaps in a parking lot or driveway) and start directions to an address, it rarely starts the map out pointing in the right direction - making it difficult to tell whether I should turn right or left coming out of the parking lot. Of course, once I start moving I can see whether I'm moving in the right direction (and half the time I'm not - no snarky comments, please). It really annoys me that the internal compass can't figure out and take into account which way I'm pointing when I'm at rest. So I can immediately tell which was to turn.
2) When I am moving, and I tap the purple location icon until it enters compass mode one of two things usually happens - both really annoying. Either it asks me to wave the phone around in a figure-8 (which it does often) or it doesn't set me moving towards the top of the map but instead as much as 45 degrees off from that (sometimes even a full 90 degrees). It's annoying to have to disconnect my phone from power - while I'm driving - and wave it around. And it's super annoying that it almost NEVER points the map in the right direction - nor is the error consistent but often spins around all over the place.
Now, I do recgonize that when my phone is mounted on my dash it is angled slightly towards me and thus not truly pointing straight ahead. I might then expect a slight variation in map heading due to do that - but I would expect it to be consistent, and it is not.
So, is anyone else having these problems and has anyone found a way to improve the compass/map performance?
Thanks.

I think this is an ongoing problem with the iPhone 5. I went to the store in my area and asked them about it. They said I needed to be away from any metal objects. Then asked when I noticed it. I replied while at work, The genius asked if there was anywhere I could stand that wasn't near any metal. I said, not safely.... he gave me a puzzled look, then I told him I work on Tankers at sea.
Fortunately I don't have to depend on the iPhone compass. But it would be nice if it were a working feature and not just a cheesy gimmick.

TS3988 What has happened to the delete? Need it for mail and various other things. I want to delete something and there is no trsh can so I have to leave it on which I don't want to do/ Also is there some way I can hold my messages and delete more than

I am just starting to use an Apple product. There are things I want to delete like e-mails, etc. Where did it go. Why can't there be a selection in the font saying DELETE.?
This is a question.
Message was edited by: fondaflowers

Welcome to the Apple community.
Unfortunately, it isn't absolutely clear where you are trying to delete email from, could you provide some more information for us please.

Is there a way to send a group text message to more than 10 recepients?

Is it possible to send a group text message to more than 10 recipients? I called AT&T tech support and they said the phone's software limits group messages to no more than 10.

Apple does not explain why it makes the choices it does, nor will you get a response
from Apple on this forum. You can make Apple aware of your thoughts at
www.apple.com/feedback Your message will be read, but not answered.
AFAIK, there is no way to increase the limit of the native app. Use a 3rd party app if that
function is important to you. Others have expressed similar frustration in the past and
have chosen another app to fill their needs.

Is there any way to make the Comments list appear somewhere other than below the active PDF?

It would be great if there was some way the Comments list when participating in a PDF Review could be moved to the right side of the PDF or in a movable window of its own. With a dual monitor setup this arrangement would allow better use of the screen real estate. This might also be useful for those who want all of the comments to be able to be printed from one file without the annoying break between each page.

Yes it is possible, just click & hold on the comments icon (two yellow speech bubbles) and drag in off the bar.

Is there a way of updating the device software to a more current version

I have a blackberry pearl, an 8110 pearl and an 8310 curve.   want to put the max memory in them , can the device software be updated to higher versions than they currently have in order to support the larger memory cards?

Check with you carrier on availability of updates device OS. Get the update installed in your PC.
Check below steps for OS upgrade -
Step #1
Before starting make sure that BlackBerry Desktop Software is installed on the computer.
Step#2
Make sure that you have installed updated device software installed in your PC. Check this link to get update device software from carrier OS download site.
Step#3
Users can perform a full or selective backup of the data using the Backup and Restore tool in BlackBerry Desktop Manager by completing the following steps:
Connect the BlackBerry device to the computer running BlackBerry Desktop Manager.
Open BlackBerry Desktop Manager.
Double-click Backup and Restore.
Select Backup to perform a full backup or select Advanced to perform a backup of specific databases.
Choose a location to save the backup file, then click Save.
Step#4
To perform a clean install of the BlackBerry Device Software, perform the following steps:
Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
Double-click the Application Loader icon.
Click Next to start the installation process.
Type your BlackBerry smartphone password, if prompted, and click OK.
Click the check boxes next to the names of the applications you want to load, and then click Next.
Click Advanced, and then click the check box beside Erase all currently installed applications.
Click Next.
Click the check box next to Do not automatically backup the application data during the loading process.
Clear the box next to Backup and restore applications installed wirelessly.
Click Next > Finish.
When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager.
Follwoing info on max media capacity by device OS versions -
    BlackBerry Device Software                             Media Card Size Limit
BlackBerry Device Software 4.2.0                                 Up to 2 GB
BlackBerry Device Software 4.2.1                                 Up to 4 GB
BlackBerry Device Software 4.2.2                                 Up to 4 GB
BlackBerry Device Software 4.3.0                                 Up to 8 GB
BlackBerry Device Software 4.5.0                                 Up to 8 GB
BlackBerry Device Software 4.5.0.81 and above              Up to 16 GB
BlackBerry Device Software 4.6.0                                 Up to 16 GB
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Is there other way to get the iPod Touch battery percentage other than JB?

Anyway??

One can install an app that gives % but not in the upper right. It only places it in body of the app.

Is there any way to upgrade my mid-2007 imac to more than 4GB RAM?

From what i've read it sounds like 4GB RAM is the most that my iMac is capable of using, but i' m hoping that isn't true. even though it operates plenty fast for my current needs, it would always be nice to have the option. any info will be appreciated. thanks.
current 'about this mac' :
iMac
24-inch Mid-2007
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 667 MHz DDR2 SDRAM
Graphics ATI Radeon HD 2600 Pro 256 MB
Software OS X 10.8.1 (12B19)

Yes, 6GB is possible...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
As Seventy One mentions... OWC.

I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?

I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?

We need more information. I'm not sure what you mean by both Lion and iCloud have never worked.

Is there a way to correct the pyramind effect caused by a UWA Lens in Lightroom?

Is there a way to correct the slight inverted pyramid effect caused by a 17-40 when taking interior room shots in Lightroom or do I have to go to PhotoShop to do this? I have found the lens profile correction but are there other tools in LR to use?
What I am seeing is a slight outward shift from floor to ceiling on side walls and need to straighten these walls.
Thanks

Lee,
Found those - thanks! So, I really don't need to go to PhotoShop?
Do I need to crop after adjusting the sliders - in my case, mostly the vertical slider?
Also, can you say a little more about "Upright?" And, if you know, will LR 5 be a charged-for upgrade to LR 4?
Thanks again!

Is there any way to extend the spin time?

I'm retrieving heaps of old jobs from archived CDs and DVDs and what's becoming apparent is the time the CD/DVD is spinning. I can understand saving energy etc, but it's not very long at all, which means I've been spending about 3 or 4 seconds per job, waiting for the disc to spin up. Times that over the hundred+ jobs I've got, and it'll add up.. Is there any way to extend the spin time to something more like 30 seconds, or something else?

Hello Kit,
The only thing you could try is to deselect the "spin down hard disk's when possible" option in the energy saver System Pref's. I doubt this will provide much success, but its worth a shot.
Cheers
Bryza_Bone

Is there a way to do the Alpha Inverted tool on more than 1 layer?

Similar Messages

Maybe you are looking for