Is there a way to drain the power

Is there a way to drain the nano power if the think won't turn on.

Disconnect it from your computer or power adapter and leave it for about 24 hours: iPod won't turn on

Similar Messages

  • Is there any way to change the power supply on a hp elite 8100 sff

    hello . Is there any way to upgrade the power supply from the  standerd 240W psu . the pc is a hp elite 8100 sff ( quad i7 2.8ghz nvidia quadro 295 nvs and 8 gb ram )

    Joleney-
    I do not know of any way to turn off the Sleep button.  If yours does not work, there might be an internal problem like a loose connection in the iPad.
    One thing you can try is to hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow if it appears.  If successful, the iPad will restart after a couple of minutes.
    If the Apple logo never appears, it is likely your Sleep button is bad.  If the iPad is still in warranty, show it to an Apple Store Genius.  You may get a replacement iPad if the Genius can not fix it.
    If the iPad is out of warranty or there is no Apple Store near you, look for an Apple Authorized Repair Center near you.  There may be one in your city.  If out of warranty, the cost of a repair would most likely be less than Apple's replacement price.  <Apple Authorized Repair Centers>
    Fred

  • Is there a way to disable the power button when iPhone is lock with a pass code?

    This is for security reason as you can still track ur iPhone/iPad when someone decides to steal it. My iPad 2 64gb + 3G and a MacBook Pro 17 was recently stolen and I was able to track it 10-15 mins (after the incident) until the thieve(s) decided to turn the iPad off. It would be great if someone or even Apple could add this option to the cellular versions so victims of theft could have a slight chance of retrieving stuff back (with the help of law enforcements).

    You cannot at this time. Feedback to Apple goes at www.apple.com/feedback. There are other ways for a thief to disable Find my iPhone. It is not really intended to track stolen devices although it will, it is more for lost devices.

  • TS1367 Hi I have diagnosed the problem myself with my 13 inch MacBook early 2008 edition   I took a keyboard from my friends MacBook and it worked so do I have to replace the whole keyboard or is there a way to change the power button flex cable

    I'm going I try to change keyboard flex cable tomorrow. Hopefully that will be the problem as its likely the cheapest and easiest fix

    I'm going I try to change keyboard flex cable tomorrow. Hopefully that will be the problem as its likely the cheapest and easiest fix

  • Is there a way to adjust the bass and treble on my iMac Power PC sound system?

    Is there a way to adjust the bass and treble on my iMac Power PC G5 sound system? It has a lot of volume (more than my JBL speakers).

    No, but iTunes has an Equaliser that enables you to do that.

  • Is there a way to replace a Power Point slide in Captivate and keep the CC notes?

    Hello,
    I have a lot of Power Point slides in my Captivate project. The Power Point presentation is on a Share Point, so it is impractical to "link" the Captivate project with the Power Point presentation.  Now and then we need to make changes to the Power Point slides and then replace the old slide in Captivate with the new slide.  We have a lot of CC notes and TTS attached to each slide, so I lose all of that when I replace the slide.  Is there a way to keep the synchronized CC and TTS notes in place, and just replace the acutal slide?
    Thank you!
    Ryan

    1 - simplest way:
    drag the sound file on to the audio well in the Inspector > document > document tab
    music can only start on the first slide and will play untill the music ends, you can only have one music file in the presentation
    2 - more control
    drag the sound file on to any slide, add the  images on to the same slide and use Builds to reveal each image in turn

  • I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?

    I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?

    If the charging plug fits, use it.

  • Is there a way of stopping the battery from charging?

    Dear Apple Community,
    Recently I installed iStat Menus and found that, over the course of this year, my Macbook's charging capacity has dropped 5%. I know this isn't a massive number, but battery performance has become a concern for me. I use my Macbook as a desktop replacement, on the main. It's sitting on a mStand, connected to a large monitor on my desk. I use my Macbook to play games, surf the internet, do work and all that good stuff - basically, I use it for everything. I rarely use the Macbook without it being plugged in. I read on the Apple website that they do not recommend leaving the Macbook on charge permanently and that I should use it on battery at least one a month. As I use my Macbook as a desktop replacement, I don't actually have a lot of opportunity to do this.
    My question to you, the community, is: is there a way of stopping the battery from charging, either with the use of an app or a physical device? Ideally, I would love to have my power plugged in BUT only used when the battery drops below 10%. Is this possible with an app?
    On the other hand, am I just worrying about nothing? Will my battery be damaged further if I leave the Macbook charging permanently?
    Thanks for your help!
    Jeremy Reid

    Ideally, I would love to have my power plugged in BUT only used when the battery drops below 10%. Is this possible with an app?
    The charging characteristics are handled in firmware.  There is no app that would be able to do this.  You actually would not want to do this anyway.  Regularly discharging your battery to 10% will greatly decrease the life of your battery.  While it is true that you should not use your system exclusively plugged in, allowing it to run on battery a few hours a week should be fine.  Letting the battery regularly run down to (or below) 10% will cause you to use up cycles more quickly than is necessary (thereby reducing the life of your battery).  It's really a only a matter of disconnecting your Magsafe connector once in a while.
    Leaving it plugged in does not result in it being charged "permanently".  It will charge until it is full and then charging will stop.  It will only begin recharging when it reaches about 95%.

  • I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

    I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

    If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
    Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8).  If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
    Insert the disk then power down
    HOLDING the C key, power up to boot from the disc.
    Get to Disk Utility
    If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
    When it completes the Repair process successfully as indicated in DU, do a shut down.  If Repair is not successful then an different course of action is indicated below.
    Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
    If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM  DO NOT ERASE THE DISK OR VOLUME FIRST.  REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system.  After re-installing the OS do a software update.  Note that ERASING the disk is NOT required to do an OS re-install.  This allows your existing data and application files to remain.
    If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
    If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk  and try a re-install.
    If that fasils then you may have a defective hard disk.

  • My computer keyboard has a bad "M" key so I cannot login into my computer from boot     is there a way to bypass the login to reset my macbook pro

    my computer keyboard has a bad "M" key so I cannot login into my computer from boot     is there a way to bypass the login to reset my macbook pro

    Late reply, but if anyone is experiencing the same problem, I've found a solution. For whatever reason, some macbooks don't recognize usb flash drives during the boot-up phase, even though the usb ports themselves are powered (I tested this with a multimeter). The solution then, was to use an external USB hard drive that has its own power supply to install Snow Leopard. I don't know why, but it's the only way I got my macbook (Macbook 2,1/A1181) to recognize the install drive. Every was smooth sailing from there!

  • Is there a way to put the bluetooth icon on the homepage?

    I pair my iphone with my car when I'm driving. Is there a way to put the bluetooth icon on the homepage so I don't have to go through settings to turn the bluetooth on and off?
    I don't like to leave the bluetooth on all the time because it drains the battery, but it's kinda a pain to have to go through settings everytime I want to use this feature.
    On my last cell phone I could assign a "hot key" to automatically turn the bluetooth on and off. I really liked that. This bluetooth system seems a little dated to me.

    No not yet, hopfully soon.

  • Is there a way to hide the reading pane in iPad mail after a message is read?

    Is there a way to hide the reading pane in iPad mail after a message is read?

    Selecting a different email will change what is displayed. Tapping the Home button will take you back to the Home screens. Tapping the power button on the top of the iPad will put it to sleep. Those are pretty much your options.

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • TS1369 i have a screen with the apple logo on it and a bar underneath it. it has been this way for about an hour now. what does this mean and is there a way to reset the iphone without going into the store? it isnt showing in my computer or on the itunes

    i have a screen with the apple logo on it and a bar underneath it. it has been this way for about an hour now. what does this mean and is there a way to reset the iphone without going into the store? it isnt showing in my computer or on the itunes page.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT201269 my IPOD touch completely died.  I just got a replacement.  Is there a way to put the songs that were on the old one onto the new one?

    My IPOD touch completely died.  It will not power up.  I bought a replacement.  Is there a way to transfer the music already purchased onto the new IPOD from Itunes?

    Just sync the new iPod with the computer that you used to sync the old iPod.

Maybe you are looking for