Is there a way to edit the saved StartCfg.cfg file on a Linksys SRW switch?

I have a SRW248G4 switch that I want to edit the StartCfg.cfg file to use as a template for several new switches. The content of the startcfg.cfg file looks to be binary or mostly binary. Is there a way to get the switch to save and load the file in text format similar to the Cisco switches?
An alternate option is to create a templete config on one of the new switches with all the standard settings, save it, upload that template config to the other new switches and change the things that are different/unique from the web interface. This is possible but will take a lot longer.
Thanks,
Kerry Melcher, CCNP

You cannot edit the library file itself, but you could perhaps edit the XLM file and then import that, basically following the procedure you use when the library file has been damaged:
http://support.apple.com/kb/HT1451
You'll need to be very careful about editing the XML, though, as it's really easy to completely mess up your library if you edit the wrong thing. Make absolutely sure you have backup copies of the original iTunes library file and XML file, so you can put them back just in case something does go wrong.
Hope this helps.

Similar Messages

Is There A Way To Edit The Raw iTunes Library File?

I have thousands upon thousands of songs. I'm of a mind to (in effect) do a find/replace on every instance of a phrase in one particular field and don't want to have to go though every single one manually, since that would take forever.
Anyone have any ideas?

You cannot edit the library file itself, but you could perhaps edit the XLM file and then import that, basically following the procedure you use when the library file has been damaged:
http://support.apple.com/kb/HT1451
You'll need to be very careful about editing the XML, though, as it's really easy to completely mess up your library if you edit the wrong thing. Make absolutely sure you have backup copies of the original iTunes library file and XML file, so you can put them back just in case something does go wrong.
Hope this helps.

Is there a way to edit the context menus in Firefox?

Is there any way to edit the context menus in Firefox outside of installing an extension, or does anyone know of an extension that does so that is updated regularly? There is one called Menu Editor, but it doesn't look like it's being updated any time soon so I wouldn't imagine it will be compatible with 4.0 any time soon. I just want to edit the order of something to convince me to switch back to Firefox.
== This happened ==
Every time Firefox opened

No, the submit button text is not customizable.

In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

scottiewade wrote:
Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
Hi
Wrong..
To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
Make sure that you have turned off Group Clutch (this disables all Groups)
Maybe this will help
http://support.apple.com/kb/VI248
CCT

Is there any way to edit the standard Firefox context menu for displayed Web pages?

Is there any way to edit the standard Firefox context menu for displayed Web pages? I frequently want to save a picture appearing on a page. Sometimes I "slip" and hit "Send Image" when I want "Save Image As", and have to sit and wait for a default send-mail page to come up, then close it, fiddling with its "are you sure" dialogs. This is a painful way to handle a slip-up. I basically NEVER want to e-mail an element directly from a page. Is there any way I can just delete "Send Image" from the context menu?

You can remove entries in the context menu with code in the userChrome.css file
*http://kb.mozillazine.org/userChrome.css
Some IDs are listed in this MozillaZine Knowledge Base article:
*http://kb.mozillazine.org/Chrome_element_names_and_IDs
To find the ID of others you will have to use the DOM Inspector.
* https://support.mozilla.org/kb/DOM+Inspector
* https://developer.mozilla.org/En/DOM_Inspector
* https://developer.mozilla.org/en/Introduction_to_DOM_Inspector
* DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

Is there a way to clean the javascript cache of files in layouts folder?

Is there a way to clean the javascript cache of files in layouts folder?
If I deploy a new version of the solution after some changes in javascript file which is deployed to the layouts folder the old version is used. The only fix I have found so far is to change the URL of the javascript file with some fake querystring like
"?v=2". But this requires another deployment. So I am asking for an alternative approach.

hi Nikolay,
there is no clean solution for your problem. Browsers cache files by url, you can avoid caching appending in query string unique value per deployment. For example
_layouts/my_js_file.js?v=<current date> - will be refreshed from cache when day changes
_layouts/my_js_file.js?v=<GUID> - if guid is generated on every request, this file should never cache
_layouts/my_js_file.js?v=<product version> - more preferable solution, browser will update cache on every new version that was deployed
Actually, ScriptLink should take care about this, internally it has a method that appends unique id into query string based on js file content, if content changed, hash is also changed and new unique id is generated.
Check Below link for more information
http://sharepoint.stackexchange.com/questions/57874/how-to-avoid-caching-issue-when-using-custom-javascript-and-css-deployed-under
You can also check this link
http://www.sharepointnutsandbolts.com/2011/11/avoiding-bugs-from-cached-javascript.html
Please mark the Answer and Vote if it will help to resolved your issue

Is there any way to edit the autocorrect dictionary?

Autocorrect is potentially very useful, but it keeps throwing up mistakes and pointless alternatives. Is there any way to edit this list?
FOR EXAMPLE: Whenever I type the word "word", iphone throws up "'Word" - complete with unwanted single-quote and capital W - and if I don't spot it in time, it inserts it. Another mistake is when it 'corrects' 'me' to 'mr', despite the fact that I don't normally use 'mr'.
Is there any way to remove unwanted words in the autocorrect dictionary? Tapping the unwanted word - with its little 'x' at the end - doesn't delete the word from its use the next time. Furthermore, is there a way of ADDING a word that I know I'm going to need in the future? (Such as a friend's name)

You can reset the dictionary back to default from the keyboard settings (or was it Reset area), either way, can reset the dictionary. No way to edit it. me should be more popular than mr and now sure why it is doing the Word thing.

Is there a way to retrieve the date of a file

I would like to know is there a way to retrieve the last modified or last created date of a file in Solaris in Java?
Thanks.

Class java.io.File has a method lastModified. For 10 dukes I'll point out the exact location in the dokumentation.

Is there a way to edit the same RAW file in Aperture 3 and then Photoshop CS5?

I recently got Aperture 3.4.5 and its been great for stream-lining my workflow. But for certain RAW adjustments, like applying a gradient, I want to use Photoshop CS5's RAW editing window. I don't seem to be able to export the file as a modified CR2 from Aperture to Photoshop CS5. Is there a way to do this?
And if exporting a modified CR2 from aperture is not possible, what advice can you give me for applying gradients in aperture, or in combinations with photoshop. Is there a way to open a JPEG or TIFF in the raw editing window by any chance?
Any and all advice welcome. Cheers!
-Mike

Is there a way to open a JPEG or TIFF in the raw editing window by any chance?
If you open Bridge and go into the Camera Raw Preferences, you will see a section at the bottom where you can set preferences for TIFF handling. Setting the option to 'Automatically open all supported TIFFs' will result in any TIFF file sent from Aperture to Photoshop via 'Edit with Photoshop CS5' function being launched in ACR and allow you to work on the TIFF file.
You then have to open the image in Photoshop with the 'Open' button in ACR and save the file (making sure you have the TIFF file extension set when saving). I haven't used this in a while, but I think it may try to save as a '.tif' file which would not be seen by Aperture when you complete the save (and have a '.tif' file sitting in the Masters folder that has no connection).
This is still not the RAW file - obviously - but will allow you to use the ACR tools on the TIFF file generated by Aperture and return it with those edits if saved correctly in PS CS5.
Message was edited by: CorkyO2 for grammatical errors.

Is there a way to edit the songs in my library?

I have a song in my library that is actually two songs. Is there a way that I can edit it and turn it into 2 separate tracks?

CTRL-click, Options, and set the Start and Stop times for the first. Highlight the song, Advanced > Convert Selection to XXX. Back to the main song, set the Start and Stop for the second. Highlight, Advanced > Convert Selection to XXX. Retag the newly created (shorter) files with the correct info. Then you can keep or discard the original (longer) file.
Note that this procedure does not work with "protected" purchases from the iTunes Store.

Is there a way to edit the html code of the page directly on iweb?

My web server gives me the error: Parse error: syntax error, unexpected T_STRING, everytime I try to access my site after I've updated it with the FTP server. I leanred that it was because of a bit of extraneous code in the beginning of each page that my web server just doesn't seem to like. I can go back through once it is updated and delete the code on the web server but it is a big pain to do this each time I update my website, and I would still like to be able to utilize FTP.
Any help would be greatly appreciated.

No, you cannot edit the HTML code in iWeb. The webpages are created when you choose publish.
The parse error is caused by a misconfigured server. Here's how to solve it :
The PHP parse error
If you cannot change it, ask your webhoster to do it for you. It's not a iWeb issue.

Is there a way to disable the option to save files in the cloud for a companies user base in the new subscription model??

Our corporation is mandated by privacy laws within provincial legislation that prevents us from using cloud based storage outside of our province for the storage of data. We are unable to continue using Adobe products based on the new subscription based model due to the inclusion of cloud based storage. We need to have a way to disable the ability/option for our large corporate user base to store data files in the cloud. Merely having the "option" to store files in a location of one's choice is not sufficient based on the policies we are legally forced to adhere to. Without the option of disabling the cloud storage for our user base we will be forced to look at other vendors products to fill the needs we have that are currently filled by the Adobe line of products. We would prefer to stay with Adobe products...so if someone knows how to disable this option (via registry edits, etc.), please advise.

hi Nikolay,
there is no clean solution for your problem. Browsers cache files by url, you can avoid caching appending in query string unique value per deployment. For example
_layouts/my_js_file.js?v=<current date> - will be refreshed from cache when day changes
_layouts/my_js_file.js?v=<GUID> - if guid is generated on every request, this file should never cache
_layouts/my_js_file.js?v=<product version> - more preferable solution, browser will update cache on every new version that was deployed
Actually, ScriptLink should take care about this, internally it has a method that appends unique id into query string based on js file content, if content changed, hash is also changed and new unique id is generated.
Check Below link for more information
http://sharepoint.stackexchange.com/questions/57874/how-to-avoid-caching-issue-when-using-custom-javascript-and-css-deployed-under
You can also check this link
http://www.sharepointnutsandbolts.com/2011/11/avoiding-bugs-from-cached-javascript.html
Please mark the Answer and Vote if it will help to resolved your issue

Is there a way to rebuild the ITunes Library XML file from my IPod?

After several promptings, I finally decided to install ITunes 7.4.3.1. Like a fool, I did not backup my entire library prior to doing this upgrade. Nothing is going to go wrong now mate, is it? Everything seemed to proceed just fine with the upgrade. I noticed that ITunes updated the XML Library in the process. Where the problems occured was after the upgrade, I was in the middle of listening to the latest "NPR Wait Wait Don't Tell Me" Podcast (I have some 3,000 downloaded podcasts in over 85GB worth of space) when ITunes crashed. When I brought ITunes back up, it had seemed to have reverted to an earlier backup ITunes Library XML file that I had made months ago.
I still have all of the .mp3, .m4a, .mp4 and .m4v files stored in my ITunes Music folder. Somehow when I brought ITunes back up, it had lost all of the music I had dowloaded from the ITunes store even though the files were still out on disk. It thought there were only 395 podcasts despite the 3,000 plus files out there.
Clearly, something went horribly wrong and I don't want to spend weeks downloading these files again when the only thing that really needs to be done is the ITunes Library XML data file needs to be rebuilt. It dawns on me that my IPod has an XML data file that save any updates I have not yet synced with it that it is quite current. Is there some way that I can sync my IPod with ITunes and copy the IPod XML data file into ITunes Library XML data file? I know that there must be some way to access the IPod since I can plug it into my Kenwood car stereo and read through the IPod's contents.
Is there anyone out there that has an idea that might be able to help me recover my ITunes library?
Thanks for any assistance,
--randyt00

The XML file is not used by iTunes. It is created for the use of other programs. Your library is in the itl file. SInce you still have the file you could simply add them to your library using the add folder option instead of downloading again.
What are library files
http://docs.info.apple.com/article.html?artnum=93732
Rebuild library.
http://docs.info.apple.com/article.html?artnum=93313

Is there a way to edit the plist so that everything on Snow Leopard Server gets backed up?

Hi there:
I have read that using Time Machine to back up Snow Leopard Server (10.6.8) itself, including the Mail and OpenDirectory modules, can cause problem when restoring. Has a way been found to fix this? Does it involved editing a plist? If not, are there 3rd party software programs (other than SuperDuper and CCC) that can make a complete, restorable image?
Thanks!
8FConsulting

8FConsulting wrote:
Hi there:
I have read that using Time Machine to back up Snow Leopard Server (10.6.8) itself, including the Mail and OpenDirectory modules, can cause problem when restoring. Has a way been found to fix this? Does it involved editing a plist? If not, are there 3rd party software programs (other than SuperDuper and CCC) that can make a complete, restorable image?
The most common or likely problem is that on a server some files are in constant use when the server is running. For example a FileMaker Pro Database server. As the files are in use it is possible for information to be in memory and not yet written to disk, or for the file to be in the process of being modified and only part of the modifications having been written to disk.
Time Machine, SuperDuper and CCC are I would feel all equally likely to be affected by this. The only sure fire way to prevent this is to boot from a different drive before doing the backup. Some server software like FileMaker Pro Server has its own routines to periodic backups, you would then backup the backup file . Apple has a similar 'Archive' function in Server Admin for backing up the Open Directory databases.
Note: A server crash is just as likely (if not more so) to result in files being in an inconsistent state. As crashes are a somewhat expected occurance the software (one hopes) has been designed to recover from this sort of state.
Last I read Apple did not encourage using Time Machine to backup a server although I do use this. However I only use it as an additional form of backup. I also use CCC and Retrospect (you can never have too many backups). I would tend to use Time Machine as my last choice for doing a full restore, for speed reasons if nothing else.

Is there any way to edit the pdf text field design?

I dont want a black frame around text frames when a form is printed...
In Livecycle you could define various properties (like sunken box etc.), but not in FormsCentral?

If you have Acrobat Pro you can edit a pdf form file to have the various field border properties that you describe. You would create the form in FormsCentral and save as PDF. Then you would do a Save a Copy on the form. Open the copy and select Tools->Form->Edit. You can then select the fields and set the border in the Properties dialog in the appearance tab. Once you have the form looking the way you want you would then re-import the copy into FormsCentral and send the file out to the world.

Is there a way to edit the saved StartCfg.cfg file on a Linksys SRW switch?

Similar Messages

Maybe you are looking for