Is there a way to embed multiple javafx components to one html

Hi All,
I have created a javafx component which is similar to the speed meter. Currently I have now embedded one instance of that speed meter. But I tried to put another one as the same but it didn't work where only one instance worked. Is there any way to resolve this issue to have multiple instance of it or are there any alternatives. Please guide me on this to put multiple instance of the same jar or any other good alternative solution.
Thanks in Advance
cheers
Maha

Still no ideas? Apple, please come up with a fix. Thanks.

Similar Messages

Is there a way to create multiple BQY output to one of the Job File ?

Hello,
I am using EPM11.1.2.3.501 version.
BQY report due to the large amount of data, it is difficult to use a WebClient.
So will share on a quarterly basis.
However,
If modifications are to occur,There are difficulties must modify each file.
For example,
Register 2014 1Q, 2014 2Q, 2014 3Q, 2014 4Q BQY Job file.
When you run the job, the output of the job file is created.
If the job file is changed, you must modify all four files.
This will be only grow ations.
Is there a way to create multiple BQY output to one of the Job File ??
Please help me.
Thanks

It is not possible to have multiple BQY outpu into a job file.
Thanks,
KK

HT1918 Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

No. Unfortunately, you can't combine Apple IDs togetehr, even if you own them all.

Is there a way to move multiple Calendar items from one date to another?

Hello. I have far too many Calendar items every day in my iCal. Until I finally pare them down to a reasonable level, I need to "reschedule" all of my unfinished ToDo items and reminders, to another day, later in the week.
There doesn't seem to be any "Select All" feature available.
Is there a way to move multiple Calendar items from one date to another?
Thanks in advance!

Still no ideas? Apple, please come up with a fix. Thanks.

Is there a way to send multiple pdf's in one email from iBooks? I have several that I've saved that I need to send to one person. If it can't be done directly, is there a work around?

Is there a way to send multiple PDF documents from iBooks in one email? I have several that need to be sent to one person and can't figure out how to send more than one at a time. If you can't, is there a workaround?

Warehouse that PDF on your own server, then link to it from your book.
Ken

Is there a way to acknowledge multiple ical notifications at one time?

I turned on an iBook I haven't used is almost 2 years. ical popped up reminders from two years ago. Is there a way to acknowledge these reminders all at one time?

Filter the mail based on mail addressed "To: (Your email address). The action is to send it to the "trash " folder. In effect, the trash folder automatically becomes your Inbox. Save what you want by moving items from trash. Then touch "edit" "delete all".

Is there a way to have multiple WSDL's in one machine?

Hi!
Some Netweaver/Dynpro programmers are asking me if it is posible to have more than one WSDL in the same server. For what? They want to separate the vendors process from the materials process from the customer process, because each time any of these process creates a new real time service and uploads it to the web services, all of the three programmers have to reimport the WSDL in to their models.
Any help will be appreciated, please..
See you and thank you very much.
Luis C. Gamiño C.

No, the Management Console has one WebService page. You would need to install the Management Console a second time for that.

Is there a way to combine multiple tables/sheets into one file?

In Excel if add more than one sheet you have tabs at the bottom that you can click on and name. Does Numbers have something similar? I searched support and even googled the question but couldn't really find an answer. I appreicate any help!!!
Thanks!!

More a vocabulary issue than anything else, although the underlying models are somehwat different.
A Numbers document must have at least one Sheet, the large canvas on which other objects are placed.
Every Sheet starts with one Table on it. You can add several tables to a Sheet. Usually hese are (relatively) small, single purpose tables, typically used to perform calculations on the contents of the main table, to hold data used by the main table, to extract data from the main table for use in a Chart, or for other purposes. As each Table is added, its icon is added to the list, under the Sheet to which it was added. Tables can be moved to a different sheet by dragging their icons in the Sheets list. umbers aoutomatically updates all formulas to fit the new location.
Charts can be added to a Sheet by selectng the data to be graphed, then choosing the chart type from the Charts button in the Toolbar. An icon for each chart is added to the list (under its Sheet) as the chart is created.
When you add a Sheet to a Numbers document, that Sheet's icon appears in the Sheets list to the left of the working area (where the active Sheet and its contents are displayed). Charts can be moved to a differet Sheet by dragging their icons.
Other objects (Text boxes, graphics objects) can also be added to the Sheet. No icons appear for these.
The list of items for each Sheet can be collapsed (by clicking the disclosure triangle beside the Sheet name), hiding the Table and Chart names, and leaving only the Sheet name and icon showing in the Sheets list.
Only one sheet may be viewed at a time. To switch between sheets, click the icon of the Shhet to which you want to go, or click the icon of an item on that sheet to bring the sheet to the front with the clicked item on the screen.
For more detail, and a better introduction to Numbers, I'd recommend reading at least the first four chapters of the Numbers '09 User Guide, available through the Help menu in Numbers, or from this page.
Regards,
Barry

Is there a way to open multiple childs of Accordian at a same time

Hi,
Is there a way to open multiple childs of Accordain at a same time.
My requiremnets is something like this:--
Thanks for any help on this in Advance.
Regards
Munira

You can have multiple nodes open on a tree, so I guess you could open them all up on a button click.
Another option that might be possible is to use individual Accordians for each section and then use the click function to close the others.

Is there a way to delete multiple pictures at the same time from the iphone4s?

Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks

Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

Is there a way to get multiple email accounts on the front page of my Iphone? Also I would like to have different sounds when I receive mail in the different accounts. Is this possible?

Is there a way to get multiple email accounts on the front page of my iphone instead of just the generic mail icon? Also is there a way to get a different alert sound for each email?

No.
You need to review this (WYSISWG):
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

Is there a way to create multiple map tile layers at once?

Hello experts,
I have a small problem. It's mainly a matter of saving some time. I need to create 51 map tile layers in mapviewer, and I would like to this this at one time. I can go to the admin console-->Management-->Manage Map Tile Layers-->Create, and then I can create one at a time. But it really would be nice to create them all at once!
I tried using the XML mode interface, and I can use the following code to create one map tile layer:
<?xml version="1.0" standalone="yes"?>
<map_tile_server_admin_request>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
</map_tile_server_admin_request> And it creates one layer. But when I try this:
<?xml version="1.0" standalone="yes"?>
<map_tile_server_admin_request>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION_WY"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION_WY"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
</map_tile_server_admin_request>...it creates only the first map tile layer in my xml request.
Is there any way to create multiple map tile layers at once?
Thank you!
John

Michael,
It looks like you are right! Thank you for your help.
I still have a small concern. I looked at the documentation and it reads,
"The configuration settings for a cache instance are stored in the USER_SDO_CACHED_MAPS metadata view. You should normally not manipulate this view directly, but should instead use the MapViewer administration tool, which uses this view to configure map cache instances."
But, I tried inserting records into USER_SDO_CACHED_MAPS and it works, and I can't really see any reason not to directly insert records into this table, so...
Perhaps that warning is there simply because potentially you could screw things up tinkering with the table directly.
Cheers!
John

Is there a way to display multiple iPad screens on the same television screen simultaneously?

Is there a way to display multiple iPad screens on the same television set concurrently? The idea is to let multiple individuals do something on their iPads in a timed window and then display the results of each iPad users answer concurrently on te same television.

Devices that display two, four, or even eight video signals on a single monitor are available in the video security market. Maybe you could find something there that would do what you want. A quick search on "security tv screen multiplexor" (without the quotes) yielded millions of pages; several on the first page looked promising if you don't mind composite video.

Is there any way to create multiple users in a single shot in oracle db

Can Any one tell me, is there any way to create multiple users in a single shot in oracle database.

Hello Nunhum,
I guess this was not my question.. This is not what I m asking.. I know there is not a single sql statement in oracle ,which could create multiusers alike UNIX/LINUX(OS LEVEL), Whatever you have written..is simple creating them one by one.
What I am expecting is to have PL/SQL statement which could help us in this regard.

Is there a way to embed multiple javafx components to one html

Similar Messages

Maybe you are looking for