Is there a way to enter specific numbers in the Adjust pane?

I need to repeat some adjustments such as exposure for a number of photos. But I can't simply copy the whole adjustment group and paste it because some of the other adjustments need to stay as they are. SO I just want to copy or re-renter one numeric value. The sliders are very imprecise and if I want to set the exposure to +2.0 it will sometimes land on 1.98 than jump to 2.01 etc... Is there a way to enter these values numerically instead of by using the sliders?
Thanks for any help.
Bo

Bo:
When you set a specific adjust for a photo you can copy those settings (the Copy button) and then apply (Paste button) to other photos. Those settings will be preserved until you set new ones and save them, i.e. you can close iPhoto, reopen and the setting will still be there to apply to photos.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Similar Messages

  • Is there a way to enter a "Legend" on the iCal?

    Is there a way to enter a "legend" on the iCal?

    seriously do the feedback... they do listen... and they tally the requests so add your voice to the tally
    http://www.apple.com/feedback/iphone.html

  • Is there a way to delete some numbers from the "my recents" without deleting all of them?

    Is there some way to delete only some of the list of "My Recents" while retaining some of them? It seems that to delete some all have to be deleted.

    That tip worked perfectly. It's strange that Apple phone help, even when I was transferred to "the highest level of help", said it could not be done, that it was either all or nothing when it comes to deleting "My Recents" call history. What kind of bozos do they have working there? If Jobs was still alive, he would fire those clowns who claim to be the highest level of help when they don't even know enough about their product to give good technical advice. Thanks again.
    <Email Edited by Host>

  • Is there a way to add line numbers in the margin?

    Is there a way to automatically add line numbers in the margin of a document?

    Hi Brian,
    If you go with Peter's suggestion, there are some details that since I've got a minute here, I'll mention...
    Set your Line Spacing for the document text to "Exactly" before you begin adjusting your table, otherwise you will have registration problems.
    Your Table will have to be a Floating object. Otherwise you won't be able to slide it into the margin. And, speaking of the margin, stay out of the gray area with the numbers if you want to print them. The gray border around your document is the area that the printer driver says is non-printable.
    In the Table Inspector, set Columns to 1 and Rows to 20 or whatever you prefer for your document. Set the number of Header Rows to 0.
    To apply the numbering, use the Fill feature: Type 1 in the first cell, type 2 in the second cell. Select both cells. Grab the Fill Handle in the lower right corner of the selection and drag it down to add a series of numbers to the rest of the column. (Easier than typing.)
    Decide how you want to justify the numbering. The Text Inspector has both vertical and horizontal justification controls for this. Just select the entire table and make the settings.
    Set the cell height to match the text line spacing. You can get close with the table row height, and maybe closer with a minor line spacing adjustment. Don't expect perfection, but you can get pretty close.
    You probably don't want the cell borders to show, so with the entire table selected, go to the Graphic Inspector and set Stroke to None.
    Lastly, cause the table to appear on every page by doing: Format > Advanced > Move Object to Section Master.
    Regards,
    Jerry

  • Is there a way to enter data into a numbers cell on the screen directly, no keypad?

    Is there a way to enter data into a numbers cell on the screen directly, no keypad?
    Using a stylus or finger?

    No. You have to use the built-in keyboard or a bluetooth connected external keyboard.
     Cheers, Tom

  • Is there a way to view image numbers in iPad photos, either of images taken with the iPad or of images copied into Photo (or camera roll) on the iPad?

    Is there a way to view image numbers (metadata) on the iPad Photo app, distinguishing those taken with the internal camera from those downloaded from external camera or copied from an email?

    sberman: My iMac is running iTunes 11.0.2 already. As well, the Photos tab in the iTunes window shows that "Sync Photos from" is un-checked. And in the box to the right of it is the greyed-out empty folder that I previously synced to in order to remove photos from the Camera Roll.
    Ralph9430: I did a reset (Home + Sleep) earlier when I was trying everything I could think of. I have also re-synced a couple of times. No luck.
    Thanks anyway. I was hoping someone out there would tell me they've experienced the same problems (non-functioning DELETE button, and persistent data in Photo Library), even if they haven't found a solution. Then I could assume it's a iOS 6 bug. All I can think of to do next is a full iPad restore.

  • Is there a way to get phone numbers back on my iphone / or excel sheet?

    Is there a way to get phone numbers back on my iphone / or excel sheet?
    What I've done:
    I've upgraded my iphone from 2.0 to 2.1. To be able to do this I've upgraded to the latest iTunes and switched my USB port several times until it was finaly installed. Then, despite iTunes taking 3 hours time for making backups, I found my phone to be completely empty when it was finished. So, I tried to restored the phone. This gave an error 1602 and bricked my phone. Tried it all over again two times more with same results.
    The bottom line is that I have an empty phone and I really would like to have my phone numbers back. There's some 1.02 GB of backup information in the apple directory, so I guess they must be something there. But how do I know which file I need and how to decode it?

    Your contacts should still be on whatever program you sync your iphone to (i.e. Outlook, address book).
    The iphone is not a stand alone device. It is designed to be synced with a computer. If you have not been syncing with a compatible program, then you are out of luck. Your contacts are not included in the back-up because it is meant to be synced with your computer.
    "Although iTunes backs up most of your iPhone and iPod touch settings, downloaded applications, and other information (Contacts, calendars, notes, images in the Camera Roll), your audio, video, and photo content are not included in the backup."
    http://support.apple.com/kb/HT1414

  • How can I acess my ipad content from the pc, without enter the security code on ipad? I broke the screen and it doesn´t work. theres a way to enter the code on the pc?

    how can I acess my ipad content from the pc, without enter the security code on ipad? I broke the screen and it doesn´t work. theres a way to enter the code on the pc? thank you

    No. Get it fix by making an appointment with the Apple genius bar.

  • Is there a way to import specific information into a form?

    is there a way to import specific information into a form?

    No, we currently don't support preopulating a form.

  • Is there a way to block certain numbers from iMessaging?

    Is there a way to block certain numbers from iMessages, such as Smart limits with AT&T?

    Sorry, no.

  • Is there a way to see specific times and duration of phone calls?

    Is there a way to see specific times and duration of phone calls?

    Tap the phone button, then Recents. You see a list of the recent calls and can tap the arrow to the right of the name/number. That should give you the time and duration.

  • Is there any way to get specific app data from iCloud so that when you redoes load an app, you can restore its data?

    Is there any way to get specific app data from iCloud so that when you redoes load an app, you can restore its data?

    no.
    the backup is only for the purpose if you need to wipe the device.

  • Using iOS 7 on my iPad, is there a way to put an event into the calendar without having to scroll down to calendar and select "home" every time?  My friend's iPad retains that setting but mine doesn't .

    Using ios7 on my iPad, is there any way to enter a calendar event without having to scroll down to calendar and selecting "home" every time?  My friend's retains that setting, bu mine won't .

    Settings>Mail, Contacts & Calendar
    Scroll till you see calendar and set default calendar to the one you want.

  • My itunes account was disabled for some reason.  I changed password in iforgot and still didn't work.  I could log in but not make purchases from the store so I set up a new login/account .  Is there any way to move my music to the new account?

    My itunes account was disabled for some reason.  I changed password in iforgot and still didn't work.  I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2.  Is there any way to move my music to the new account?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Data Sets - Is there a way to put two fields in the same row?

    I am working on my first Spry Data Set (in Dreamweaver CS4) which, if I can get it figured out, will eventually be used as a calendar on a client's web site. You can see the beginning of the project here:
    http://www.rieradesignco.com/calendarlist_spry.html
    My question is, can I put two or more fields on one row? Specifically, I would like the part that looks like this...
    3
    [WED]
    Fusion
    ... to look like this:
    3   [WED]   Fusion
    I tried simply moving the fields (in Design View) so that they looked like they would be in the same row, but as you can see, that didn't do the trick. (You can see what I did here, in the highlighted part of the screenshot:  http://www.rieradesignco.com/spryquestion.jpg). I also tried nesting a table within the table on my html data document that contained the three fields I needed - it worked okay, but that just makes the table more difficult to work with. I don't want to simply type the three items into one field, because it will be a long list and they all need to line up perfectly.
    Is there another way to do it?

    Change the following line to include the red coloured parts
    <div class="MasterColumn" spry:repeat="ds4" spry:setrow="ds4" spry:hover="MasterColumnHover" spry:select="MasterColumnSelected">
      <span>{Dsp_#}</span><span>{Dsp_WkDay}</span><span>{Dsp_Event}</span>
    </div>
    The add the following style rule to your document:
    .MasterColumn span {
        display: inline-block;
    I hope this helps.
    Ben

Maybe you are looking for