Is there a way to export still images from Quicktime or do I need Quicktime Pro (and is Quicktime Pro even still a thing?)

I'm sure there used to be an option "export to still image" but not any more.
Do I need to switch to Quicktime Pro? I used to have it back in my P.C. days but I'm not sure if Quicktime Pro is even a thing any more.
I don't want to go down the "screen grab" option because my source footage is larger than the screen size and so I want to do my cropping after I've exported the stills, not before.

I played a little with live trace in CS5. Seems to do quite a good job if I had the right contrast between the blood (white stuff) and the myocardium (the dark circular wall surrounding the white round area). Picture one is the contrasted picture taken off a dicom medium (these media allow adjusting the contrast very well). Left ventricle is the smiley face on the right of image. The right ventricle is on the left, kind of D shaped. The second picture is the live trace image (with "make and expand" selection). I selected the image with the "direct selection tool (A)", then used the live trace with make and expand. The tracing can not be seen here, but it is very accurate.
The third image is the same MRI image as in picture one without contrast adjustment. Live trace did bad - fourth picture.

Similar Messages

Is there a way to export an image from Aperature into Adobe Raw before Photoshop?

Is there any way to export an image out of Aperature into Adobe Camera Raw before using Photoshop?

If you want to send a TIFF file via the 'Edit with External Editor' command after selecting Photoshop as your external editor, you can try the following:
1 - Open Camera Raw preferences (either via Bridge or ACR).
2 - Find the 'JPEG and TIFF Handling' section
3 - Use the 'TIFF:' drop-down menu to select 'Automatically open all supported TIFFs' option
4 - Click OK and restart Bridge or ACR
This should automatically launch ACR when Aperture sends a TIFF to PS.
Note - you would then need to use the 'Open Image' command from ACR to render to Photoshop and use the 'Save' command to go back to Aperture and see the changes. This is only for a TIFF file format though.

Is there any way to stop an app from updating? I accidently hit update all, and have an app I don't want updated.

Is there any way to stop an app from updating? I accidently hit "update all" and have an app i don't want updated. Thanks

you can't reverse the process, once you accepted there is no other way, if you sync it to your itunes library in your computer it will automatically update the updated app as well.
What you can try though is delete the app from your iPad and try syncing it to your itunes library but if you set up iCloud it may update the app automatically

Is there a way to prevent an image from turning blue when selecting it?

I'm exported a pdf from InDesign that will be used as a brochure for one of the exhibitions at our museum. I'm wondering if there's any way to prevent an image from turning blue when a reader clicks on it. Since all of the images are works of art, I'd rather that they not change color when people click on them.
I changed the security settings so the images couldn't be copies, hoping that would prevent the blue square, but it didn't help.
thanks for any suggestions.
Chris

There are several ways to do that and here are but two of them.
1. If you want to make a new image you can right click on the channel, click on Duplicate Channel and under Destination>Document, select New
2. If you want to add a new layer to your document, click on the channel in the channels panel, go to Select>All, then Edit>Copy, click on RGB in the channels panel and then Edit>Paste

I still have my iPod Nano 3rd generation, but my old computer crashed and I did not have itunes backed up, so I lost my library. Is there a way to get the songs from my old ipod to new computer library and then on to the new ipod?

I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?

Save all the photos from your Droid into a folder on your computer.
Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab. Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos. Then click the SYNC or APPLY button on the lower right window.

Is there any way to save an image from a nested movieclip as a .png using PNGEncoder

Hello all,
I am new to AIR and AS3 and I am developing a small AIR desktop application in Flash CS5 that saves a user generated image locally to their computer.
The image is generated from a series of user choices based on .png files that are loaded dynamically into a series of nested movieclips via XML. The final image is constructed by a series of these "user choices".
Sourcing alot of code examples from here and there, I have managed to build a "working" example of the application. I am able to "draw" the parent movieclip to which all the other dynamic movieclips reside and can then encode it using PNGEncoder. The problem is that the images loaded dynamically into the nested movieclips show as blank in the final .png generated by the user.
Is there a way to "draw" and encode these nested movieclips or do I need to find another way? I can provide my clumsy code if required but would like to know if this concept is viable before moving any further.....
Thanks in advance....

Thanks for the files.......
Yeah I'm doing it in Flash but importing the images via an xml document. The problem isn't in being able to view the eyes (based on the selection of the user) its when I go to save the resulting image as a .png. When I open up the saved .png the eyes are blank even though they are visible in the swf
Even when the user clicks on the option to copy the image to the clipboard, it works as intended.
My only guess is there is an issue with the way my xml is loading (but this appears to work fine) or when the file is converted and saved.....
As I said I'm still learning but surely there must be a simple answer to this....
I have included the xml code I am using and also the save code to see if anyone spots an issue..... (I hope I copied it all)
// XML
import flash.net.URLRequest;
import flash.net.URLLoader;
var xmlRequest:URLRequest = new URLRequest("imageData.xml");
var xmlLoader:URLLoader = new URLLoader(xmlRequest);
var imgData:XML;
var imageLoader:Loader;
var imgNum:Number = 0;
var numberOfChildren:Number;
function packaged():void
rawImage = imgData.image[imgNum].imgURL;
numberOfChildren = imgData.*.length();
imageLoader = new Loader ;
imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadedImage);
imageLoader.load(new URLRequest(rawImage));
faceBG_mc.Eyes.addChild(imageLoader);
function loadedImage(event:Event):void
imageLoader.x = -186;
imageLoader.y = -94;
imageLoader.width = 373;
imageLoader.height = 186;
// Clipboard
btn_Copy.addEventListener(MouseEvent.CLICK, onCopyClick);
function onCopyClick(event:MouseEvent):void
var bd:BitmapData = renderBitmapData();
Clipboard.generalClipboard.setData(ClipboardFormats.BITMAP_FORMAT, bd);
function renderBitmapData():BitmapData
var bd:BitmapData = new BitmapData(faceBG_mc.width,faceBG_mc.height);
bd.draw(faceBG_mc);
return bd;
// Save faceBG_mc as .png
var fileRef:FileReference = new FileReference();
var myBitmapData:BitmapData = new BitmapData (faceBG_mc.width,faceBG_mc.height, true, 0);
myBitmapData.draw(faceBG_mc);
var myPNG:ByteArray = PNGEncoder.encode(myBitmapData);
function onSaveClickPNG(e:Event)
fileRef.save(myPNG, "myPNG.png");
So my problem is....
The final image is copied to the clipboard with the eyes visible - yes
The eyes appear in the image in the swf as intended - yes
When the image is saved as a .png and is meant to include the eyes, they are blank (see picture above)
I hope this helps.....
Thanks in advance

Is there a way to export multiple pages from an application?

Hi,
I need to export multiple pages from one application and import them to an other application in one shot?
Thanks

Go into Shared components > on the right hand side select Export Application Components > and export multiple pages,components at once

Is there a way to export photo images and their metadata from Adobe Bridge to MS excel?

Is there a plugin, or script that allows photos and their metadata to be exported from Adobe Bridge to Microsoft excel?

I would like to see the description with the image when it is attached to an email. I would also like to be able to create a DVD of the images that would include the descriptions when the DVD is played back.
For that you will need iDVD to create a slideshow of the images and then display either the Title, Description or both as shown below and then burn to disk creating a video DVD to play on a TV set:
If you want the description on the image itself you'll need to use a 3rd party editor like one of those below or the free watermark iPhoto plugin, BorderFX.
Some Image Editors That Support layers:
Photoshop Elements 11 for Mac - $79
GraphicConverter - $40
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
GIMP for Mac - Free
Xee 2.1 - free

Is there any way to set an image from your camera roll as a wallpaper without having a shadow over it on iOS7?

Everytime you set a picture from Camera Roll as a wallpaper a dark shadow appears on the top and the bottom of the image.
Is there anyway one can turn this off? I've noticed this doesn't happen with the preset wallpapers the phone brings.. Thanks
Any suggestions would be appreciated!
Thanks,
Emilia

I believe the iPhone does this a default so you can view the time more clearly There is no way to turn this I think. But I have found zooming in on an image ever so slightly and moving it around can change the effect. Good luck

Is there a way to save an image from the Internet on my MacBook Pro v10.6?

I am creating a poster on a website and want to upload some images of stars onto the poster. They can just be graphics. Can this be done?
How? Thanks!

Yes. Use Google to search for the type of stars you want to use for your poster. Download them to your desktop & follow the instructions on the poster website on how to upload to your poster.

I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record?

I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record of the articles I intend to read?

I'm currently dealing with this issue myself, except that my rMBP has NO articles in the reading list. It's a brand new rMBP too, purchased just this week, with the 2.6 Ghz Processor & 16GB of RAM.
Let's see what we can find. I may just take it back to the Apple Store.

Is there a way to export an iTunes playlist from a windows XP pc and import on an iMac?

I have a PC running Windows XP that I've had for many years. I just got an iMac and want to make that my main music source for syncing iPods, playing,music in the house, etc. I have a lot of playlists on the old PC that I want to move over to the iMac and I don't have to rebuild them all by hand. Is there a way to export the original playlists from the Windows PC and import them to the iMac since the file systems are different? Thanks.

The problem really is that one person has InDesign and the other has Photoshop.
The workflow is images from photoshop are placed in Photoshop.
Not the layout from InDesign is placed in photoshop.
That's how the software is designed to work.
What people are saying is that Photoshop cannot work this way in dealing with layouts, it's a nightmare and will give you terrible results and cost you time and effort when updating things in Photoshop, it has all the makings of a Final Destination movie, particularly in the area of the later sequels.
But let's not get hung up on those franchises.
If the person needs to edit an Indesign file and can't afford the full cost of InDesign then there are other workarounds:
1. If it's just text
If all they are doing is updating text then you can use File>Export>Rich Text Format from a selection of text, this will make a Word version of the text that they can edit. You can then use File>Import and import the RTF that is edited.
2. You can use InCopy
This is a viable solution for editors that need to see the text in the Layout Format, but it hasn't got all the bells and whistles of InDesign, but it works in tangent with InDesign, it's not as pricey as InDesign and it also allows you to lock out editors from editing certain parts or moving things within the layout. And it can update your InDesign file on the fly.
3. You can use Rorohikos Story Tweaker
http://www.rorohiko.com/wordpress/2009/03/25/storytweakertextedits/
There are workarounds that you can find for people that don't have InDesign. It's just that the Photoshop workflow isn't a viable solution in any sense.
For example, I have my layouts proofed in PDF format, where the proofreader adds Comments to the PDF. It works for our workflow as I'm the one editing the only file in existence.
But to go from InDesign to Photoshop is a complete waste of time and effort on everyone's part. There is no need to go that route, there's no reason, there's no point.

Is there a way to export your photo links from Illustrator (CS6) to a contact sheet?

So I've got this project where I'm making a set of images and placing about 300 photos with each set. In order to avoid duplication and to track which photos were used where, I'm having to take screen shots of the links panel (scrolling down and taking another for each batch of images on each file). This is a really clunky way to track these files and a contact sheet would be a lot easier to work with. Is there a way to export the links to a contact sheet in Illustrator?

- select your images
- open the Document Info Panel, check "Selection Only", "Linked Images" and click on "Save..."

Is there a way to change the image numbers in a file in Aperture?

Is there a way to change the image numbers in a file in Aperture? We shoot with two photographers and so the img numbers are not in order but I would like to have the photos in chronological order on the disc when I give it to them. Does anyone know how to do this? I have them all in order ready to go in Aperture but when I move them to the disc to be burned they default back to the img number order. Thanks for your help!

What do you mean by "image number"? The file names like "IMG_7822.CR2" or "IMG_7822.jpg"?
You can create custom names with appended numbers, when you export your image files to be saved on a disk.
Sort your images by date in the browser, select them, then use the command "File > Export > Version" to write the files to the disk. Set the name format to "Custem Name with Index" or "Custom Name with Counter" to create numbered names in your current sort order.
Regards
Léonie

Is there is a way to export the themes from iDVD to DVD Studio Pro?

OK...so here's what I'm trying to find out: is there is a way to export the themes from iDVD to DVD Studio Pro? Or can I build the project in DVDSTPRO and import it to iDVD to build and burn?
I've read several threads here and haven't come across my specific question. If I missed it, please copy me a link. Otherwise, I'd like to use the templates/themes in iDVD with my FCP project.
I was thinking about importing the project from FCP to iDVD. Then, I thought about the markers etc....
So, if anyone had an idea, tip or link, I'm all for it!
Thanks!
ron

Importing iDVD Projects and Themes
DVD Studio Pro 4 can import projects from iDVD 3 and iDVD 4. You can import an iDVD theme by using the theme in a project within iDVD and importing the project into DVD Studio Pro. When creating the project within iDVD, you do not need to use the final assets or make a complete project.
Note: DVD Studio Pro will not import projects from iDVD 1, iDVD 2, and iDVD 5. In general, iDVD needs to be installed on the same system as DVD Studio Pro. An exception is if you import an iDVD 4 archive project.
To import an iDVD project or archived project into DVD Studio Pro:
1 Do one of the following:
• Choose File > Open.
• Press Command-O.
2 Locate and select the iDVD project or iDVD 4 archive project in the Open dialog, then click Open.
DVD Studio Pro imports the iDVD project.
About the iDVD Project Import
When DVD Studio Pro imports an iDVD 3 or iDVD 4 project or iDVD 4 archive project, it has standard locations it looks for to find the assets and themes used in the project. This is especially important if the project uses custom themes.
The standard locations that DVD Studio Pro uses are (in this order):
• iDVD project bundle: This is the file created when you save the project.
• [user]/Library/iDVD/Favorites: This folder is located in your home folder.
• [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
• /Network/Library/iDVD/Favorites: This folder is on a network system specifically
configured by your system administrator for this purpose. (This is not the same as having a server networked into your computer.)
• iDVD application bundle: This is the iDVD application file that contains the default theme elements.
Note: When you create an archive project in iDVD 4, you can choose to include the themes and encoded files. For the best portability, you should include both options. This results in a larger archive file, but ensures you can take the file to any DVD Studio Pro system and import it without missing assets. If you do not choose to include the themes and encoded files in the archive file, those assets must be available in one of the standard locations.
If your project will have automatically-created chapter index (scene selection) menus based on markers embedded in the video, it can be easier to create these within iDVD prior to importing the project into DVD Studio Pro. This ensures the chapter index menus use the selected theme’s background and include arrow buttons to navigate between the menus.
Important: To ensure all iDVD menu elements import correctly into DVD Studio Pro, you must navigate to each chapter index menu within iDVD before saving the project. This is also true for any menus you add to your iDVD project by clicking the Folder button.
Issues With Importing iDVD Projects
There are some issues to be aware of when you import iDVD projects:
• If you import an iDVD project with DVD-ROM content, DVD Studio Pro does not update the settings in the Disc Inspector’s General tab to reflect the DVD-ROM content. You must manually select the DVD-ROM layout and choose the folder to include.
• When you create a slideshow in iDVD, you can add arrow buttons to each still to provide viewers with an additional method of jumping to the previous and next stills. These arrow buttons are not imported when you import an iDVD project into DVD Studio Pro. The viewer must use the Previous and Next buttons on the DVD player’s remote control to jump between stills.
• The button highlights used in iDVD may look different when imported into DVD Studio Pro. In most cases, the text in the buttons is set to be included in the highlight. Additionally, buttons that use an underline in iDVD will not have an underline when imported into DVD Studio Pro.
• When you import an iDVD project, you may find that the button that is highlighted by default on some menus changes. During the project import, DVD Studio Pro numbers the buttons on each menu and highlights button 1 by default. You can assign any button on a menu to be the default button in the Menu tab in the Menu Inspector.
• If you import an iDVD project that contains a drop zone configured as a slideshow and has multiple slides assigned to it, DVD Studio Pro only shows the slideshow’s first slide in the drop zone.
Source: +DVD Studio Pro User Manual+

Is there a way to unblock html images in e-mail

we're using comexp (sun messaging server 6.2-3.04). When our users receive e-mail with html content, the images are blocked. Is there a way to unblock the images?
When the e-mail is forwarded to an external account that has the facility to unblock images, the images can be unblocked (e.g., like gmail). Just wondering if there is a way to unblock images when using the sun one messaging client.
Thank you,
Naveen

>
I will repeat my questions:
=> What version of Communications Express are you using (./showrev -p | grep uwc).
Saying "comexpress 6" is meaningless as it could mean one of 50 different releases spanning several years and hundreds of bug fixes.
=> Can you see the image if you view the email in Messenger Express?
The images are remote URL's that need to be downloaded by the browser. I have tried right clicking on the images and selecting Show Images in IE, but nothing happens. The images are still not displayed. => Does this problem happen in a non-IE browser e.g. Mozilla Firefox?
=> What type of image files are they e.g. JPG/GIF. Please provide an example URL.
When the e-mail is forwarded to another e-mail client that has the ability to unblock images, the images can be unblocked. I was wondering if there was a way to unblock the images using the Sun One Messaging web client. As I already said, Messaging Express / UWC/CE does not block images. You may however be hitting a bug with regards to downloading/parsing the URL correctly out of the html email.
Regards,
Shane.

Is there a way to export still images from Quicktime or do I need Quicktime Pro (and is Quicktime Pro even still a thing?)

Similar Messages

Maybe you are looking for